The back-and-forth bar does not come back when I reset to defaults. This problem is not solved.

I have attempted to get my back-and-forth navigation bar back as your website suggested, i.e., View/Toolbars/reset defaults, but it has not corrected the problem.

Have you tried any of these:
http://support.mozilla.com/en-US/kb/Back+and+forward+or+other+toolbar+buttons+are+missing
http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
http://support.mozilla.com/en-US/kb/How+to+customize+the+toolbar
Is your Navigation Toolbar showing?
'''Can't see the Menu Bar''' (File, Edit, View, History, Bookmarks, Tools, Help)?
Turning the Menu Bar on and off is a new feature in version 3.6.
''(~~red:Linux & OSX see~~: [[Menu bar is missing]] )''
''Windows'' Method 1. '''''Hold down''''' the key and press the following letters in this exact order: V T M then release the key
''Windows'' Method 2. Tap the F10 key, while the Menu bar is visible, choose "View > Toolbars", click "Menu Bar" so that a check mark is placed next to Menu Bar
''Windows'' Method 3. Tap and release the key. The Menu Bar will be displayed; then choose ~~red:V~~iew > ~~red:T~~oolbars and click on ~~red:M~~enu Bar so that a check mark is placed next to Menu Bar
The Menu Bar should now be displayed permanently, unless you turn it off again using View > Toolbars. Check mark = displayed, NO check mark = not displayed.
See: http://support.mozilla.com/en-US/kb/Menu+bar+is+missing
'''Navigation Toolbar, Bookmarks Toolbar and other Toolbars''' under View > Toolbars. Clicking on one of them will place a check mark (display) or remove the check mark (not displayed).
'''To display the Status Bar''', View, then click Status bar to place a check mark (display) or remove the check mark (not displayed).
'''Full Screen mode'''
http://kb.mozillazine.org/Netbooks#Full_screen
Also see:
''' [[Back and forward or other toolbar buttons are missing]]'''
'''[[Navigation Toolbar items]]'''
'''[http://support.mozilla.com/en-US/kb/How+to+customize+the+toolbar How to customize the toolbar]'''
'''Julia'''
'''''Other Issues''''': ~~red:You have installed plug-ins with known security issues. You should update them immediately.~~
'''Update Java''': your ver. 1.6.0.18; current ver. 1.6.0.20 (important security update 04-15-2010)
(Firefox 3.6 and above requires Java 1.6.0.10 or higher; see: http://support.mozilla.com/en-US/kb/Java-related+issues#Java_does_not_work_in_Firefox_3_6 )
''(Windows users: Do the manual update; very easy.)''
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: '''[http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates Updating Java]'''
Do the update with Firefox closed.
'''You''' ~~red:'''MAY'''~~ '''need to Update Adobe Reader for Firefox (aka Adobe PDF Plug-In For Firefox)''': your ver. N/A; current ver. 9.3.3 (important security update release 06-29-2010; see: http://www.adobe.com/support/security/bulletins/apsb10-15.html)
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: http://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox#Installing_and_updating_Adobe_Reader
''You may be able to update from the Adobe Reader installed on your system'' instead of going to the Adobe site and downloading. Open the Adobe Reader installed on your system (''in Windows, Start > Program Files, find and click Adobe Reader to open''), click Help, click Check for Updates.
''If you go to the Adobe site to download the current Adobe Reader:''
-'''use Firefox to download''' and '''SAVE to your hard drive''' (save to Desktop for easy access)
~~red:-See the images at the bottom left of this post to see the steps to take on the Adobe site~~
-exit Firefox (File > Exit)
-In Windows: check to see that Firefox is completely closed (''Ctrl+Alt+Del, choose Task Manager, click Processes tab, if "firefox.exe" is on the list, right-click "firefox.exe" and choose End process, close the Task Manager window'')
-double-click on the Adobe Reader installer you just downloaded to install/update Adobe Reader
*'''NOTE: On Vista and Windows 7''' you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
*'''NOTE for IE:''' Firefox and most other browsers use a Plugin. IE uses an ActiveX version. To install/update the IE ActiveX version, same instructions as above, except use IE to download the ActiveX installer. See: [[ActiveX]]
*Also see: http://kb.mozillazine.org/Adobe_Reader ~~red:'''''AND'''''~~ [[How do I edit options to add Adobe to the list of allowed sites]]

Similar Messages

I have a WRT54G v8.1. I upgraded the firmware, and now it DOES NOT WORK.

I have a WRT54G v8.1. I upgraded the firmware, and now it DOES NOT WORK. It keeps telling me that this router is not supported. There is no firmware to roll back to. It worked fine until a power outage. HELP!

If your Internet Service Provider is Cable follow this link to configure the router.
If your Internet Service Provider is DSL follow this link to configure the router.

I cleared the cache and my site does not update! What's the secret?

I cleared the cache and my site does not update! What's the secret? I created a second website and bought a domain name. You can get to the site by it's mac name or the purchased domain name. I linked the domain name and with my server and it works. The site comes up wither way. BUT, either way, I cannot get my changes to appear. I had realized that my links were not working because I had placed them within the header. So, I moved the links out of the header, republished, and now the new pages (with links in body of website) will not load. Here are the two ways to get to see the site. Both show the old way (links in header). What is up with me not being able to see the changes in either Firefox or Safari?
http://www.frankysoldiesbutgoodies.com/
http://web.mac.com/musbegin/iWeb/OldiesButGoodies/OldiesButGoodies.html
Thanks,
musicalbeginnings

hello mccormick.lee, please try downloading the full setup file for the current firefox version from https://www.mozilla.org/firefox/all/ and install it on top of your current installation.

How can you start up your ipod if holding the hold and home button does not work?

how can you start up your ipod if holding the hold and home button does not work?

Remi,
How long did you hold these buttons for? Did you try more than once? Have you tried letting it charge for a bit and trying again?
If nothing else, see this article for more troubleshooting assistance.
http://support.apple.com/kb/TS2771
B-rock

The version of OLE on the client and server machines does not match. (Exception from HRESULT: 0x80010110)

Hi,
I have installed FIM CM Client on one machine and FIM CM update service on another machine. Both are windows server 2008 r2 machines.
When i try to enroll a permanent smart card for a user, its shows me the following error:-
The version of OLE on the client and server machines does not match. (Exception from HRESULT: 0x80010110)
Also there is no logging done for the particular event.
I am able to change my smart card pin and view my smart card info. through the FIM CM client.
Is there a compatibility issue of FIM CM 2010 with Windows server 2008 r2?
Thanks

Hi,
Sorry for the delay in reply.
Please try the following steps first:
Open Powershell as Administrator
Go to Start--> Run and type wbemtest.exe.
•Click Connect.
•In the namespace text box type "root" (without quotes).
•Click Connect.
•Click Enum Instances…
•In the Class Info dialog box enter Superclass Name as "__ProviderHostQuotaConfiguration" (without quotes) and press OK. Note: the Superclass name includes a double underscore at the front.
•In the Query Result window, double-click "__ProviderHostQuotaConfiguration=@"
•In the Object Editor window, double-click HandlesPerHost.
•In the Value dialog, type in 8192
•Click Save Property.
•Click Save Object.
Under properties find the property "MemoryPerHost" or any other ones you need to modify and double click it
Change the value from 512 MB which is 536870912 to 1GB which is 1073741824
Click Save Property
Click Save Object.
•Close Wbemtest.
•Restart the computer.
And if all nodes are Windows server 2012, install the following update rollup as well:
Windows RT, Windows 8, and Windows Server 2012 update rollup: August 2013
http://support.microsoft.com/KB/2862768
If you have any feedback on our support, please send to [email protected]

I installed the latest version of iTunes (10.6.3.25) on a new Windows 7 PC. I can see ahred libraries on Shared but can't import as the line containing the Settings and Import buttons does not display. Any suggestions?

To move the iTunes library to this new computer I switched on Home Sharing and can see the other libraries on my home network. If I select tracks from a Shared library I can't import them as the strip containing "Show: All Items" and the "Settings" and "Import" buttons, does not display at the bottom of the screen. Goes straight from the list of tracks to the strip with Playlist icons and xxxx items, tttttt total time, yyyy GB.
Any suggestions for making the Import button appear?

I hvae the EXACT same issue
I built a new computer which is EXTREMELY fast overclocked i7 ect and.. ITUNES DOESNT WORK
I click on itunes which ive uninstalled and reinstalled and reset the winsock AND seen if there were any errors AAAAAAND ive check the Hkey to make sure bonjur was the only one in there which it is and all that happens is my cpu goes to 25% and i cant do anything except go into the task manager and close it! ANYTHING with itunes (everything else is premium speed).
what do i do
windows 7 64 bit

I have an iphone 5 and he thinks that the speakers and headphones it does not give the maximum volume!

I have an iphone 5 and he thinks that the speakers and headphones it does not give the maximum volume!

why does he think that?

Open Firefox 4 in new window gives a Window frame and address bar does not refresh the current url

Using Firefox 4 in Windows 7
I have customised the position of tabs (Tabs on top) and which toolbar items I would like to see.
The first window I open of firefox 4 always has the configuration as I set it.
Whenever I open a new window of firefox either:
- Right-click a link to open in a new window
- Click a link anywhere (such as an email) to open a new window
- When a website opens a page in a new window
Bad Results:
- The new window does not have the configuration as set in the main window (Tabs on top)
- The new window has a windows type window frame around the firefox window (see two sets of window controls eg. "minimise", "restore" and "close")
- The open page does not show the url - navigating to a new page within this window will not update the url :: strangely enough clicking the url page icon will update the url as it should be
- Sometimes when restarting firefox, it will open the first main window with the remembered tabs and then open approx 8 or so blank new windows as described above

This issue can be caused by an extension that isn't working properly.
Start Firefox in [[Safe Mode]] to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

HT1212 I have done the steps under the alternatively and it will does not restore and after a few minutes goes back to the page that the ipod is disabled page. Now how can I get past this?

Need help resetting ipod touch? I have followed all the directions and still it goes back to ipod is disabled connect to iTunes.

Try disabling the computer's antivirus and firewall.
- Next try the manual install method of:
iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
Place the iPod in recovery mode after the firmware download is complete and then restore using the instructions in the article. Sometimes recovery mode timeouts and returns to disabled before the firmware download is complete.
- Then try on another computer

I have reinstalled Firefox 26 as well as reset it to default. Besides losing the bookmarks, my tool bar does not function- particularly add bookmarks.

Not sure if either Windows or Firefox update caused my bookmarks to be lost. I uninstalled and reinstalled Firefox (26) as well as made multiple attempts to reset to default. Any attempts to restore only show the current date and NOT the date when last had the bookmarks. I have researched (ad nauseum) and have found multiple profiles- a couple of which show bookmarks backups from an earlier time, although earlier than I wanted (gap of 2+ weeks from other profiles up until loss of the bookmarks). I have attempted to copy the older bookmarks backup folder(s) and place them on to the desktop. When I tried to restore from a file, it was not recognized so I'm not sure if the file format is different I'm also not sure if I'm doing all of this correctly because within those backup folders (after clicking on the folder) it shows the Json files. Needless to say, I'm pulling my hair out and said lost bookmarks are important for school research. This has happened before and "somehow" (after reading different sources) I was able to get the lost bookmarks back. Now, nothing is working and can not add bookmarks. I'm "somewhat" knowledgeable of computer glitches and usually have corrected them within a reasonable amount of time. I haven't been this lost (and frustrated) in a good while. Sorry for the length here, but this has become quite cumbersome. Thanks in advance for any suggestions.

Initially back up all the profiles, you have they will hopefully contain useful bookmarks files.
*[[Back up and restore information in Firefox profiles]]
It may even be possible to repair some files or add bookmarks from other profiles so it is important to backup whatever is available.
Take CARE with any restore attempts .json files overwrite existing bookmarks so you should always manually backup existing bookmarks before any restore attempt.
*[[Restore bookmarks from backup or move them to another computer]]
* HTML may be useful they append
Multiple Profiles? 
The actual full working database is ''places.sqlite'' although other files may be useful. In your case there will be multiple copies of this database, one in each profile.
* Why the multiple profiles ?
** Do you normally deliberately run and use multiple profiles ?
** Are these all within the same OS user account ?
Standard procedures 
If bookmarks have stopped working unexpectedly the database file '''places.sqlite'' may have been corrupted. Finding the profile and deleting, or better still renaming the database will force creation of a new file. You may lose an bookmarks created in the last day that Firefox was open. See
*[[Can't add, change or save bookmarks - How to fix#w_create-a-new-bookmarks-file]]'''_create-a-new-bookmarks-file'''
* To find the profile easily Use '''Firefox Button → Help → Troubleshooting Information [open folder](or similar options)''' See [[Profiles - Where Firefox stores your bookmarks, passwords and other user data#w_how-do-i-find-my-profile]]'''_how-do-i-find-my-profile'''
* Also note [[Recover lost or missing Bookmarks]]
I presume that you are talking about the one computer and not upgrading the Windows Operating System, just uninstalling and reinstalling Firefox.
Ordinarily the bookmarks are not removed. Firefox attempts to retain the profile that includes bookmarks in case you decide to reinstall it again.
If you aggressively remove Firefox and all associated files that you will lose the bookmarks. You may be lucky and find that the bookmarks file has been tracked by Windows and possibly is restorable.
If you have any current bookmarks save them now as an HTML files by exporting them as HTML. This sort of backup has the advantage that it can be appended to current bookmarks.
*see [[Export Firefox bookmarks to an HTML file to back up or transfer bookmarks]]
It is important to note the ordinary backups overwrite and destroy any existing bookmarks when you import them.
*Do a full backup of bookmarks before you attempt any restore. See [[Restore bookmarks from backup or move them to another computer]]
The bookmarks themselves are stored within the Firefox profile and the file is called places.sqlite , that is the file you want. (There are also backup bookmarks within a backup folder inside the profile,they may also be useful files.)
*You can find the profile from Firefox Button -> Help-> Troubleshooting Information -> [Open folder] See [[Profiles - Where Firefox stores your bookmarks, passwords and other user data#w_how-do-i-find-my-profile]]_how-do-i-find-my-profile
*This explains the Windows feature http://windows.microsoft.com/en-US/windows7/Previous-versions-of-files-frequently-asked-questions Previous versions are available from right click options. Just take care with overwriting files, always back them up first

HT1414 I was trying to update my Ipad and now there is nothing on the Ipad and my computer does not even pick up that it is plugged into it

I was trying to update my Ipad using I tunes and I backed music and apps on my computer but I thought it was updating and then noticed that there was nothing on my Ipad. There is absolutely nothing on the iPad now and I have it still plugged into the computer but the I pad is not showing up in I tunes at all.

Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Home button not working or unresponsive, fix
http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
Fixing an iPad Home Button
http://tinyurl.com/om6rd6u
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

TS3217 Wher's my water has stopped working. We have both the free and paid versions on the IPAD2 and the paid version stopped working suddenly. I updated both the free and paid versions and the IOS and it still does not work(the free version works).

Where's my water suddenly stopped working. We have both the free and paid version installed and the free one works. The paid version fails during initilazation. Bothe have been updated from Itunes and the IPAD was rebooted. My wife playes it every day and yesterday it failed to run, any suggestions?

Are they apps?
See:
iOS: Troubleshooting applications purchased from the App Store
Contact the developer/go to their support site if only one app.
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod/iPad
BTW this is the iPod touch forum

HT5012 After downloading the IOS7 the music and speaker sounds crackled with background interferences. How can I resolve this problem?

After downloading the IOS 7, the music and speech sounds turn out crackled on my IPad 2. Why is this so? I wonder if other users are experiencing this problem. I regret downloading this new IOS 7.

Reset all settings
Settings>General>Reset>Reset All Settings
Note: Data will not be affected but settings will be reset.

I updated to V4 but firefox will no longer open when I click on the icon. I can see that the process has started, but there is no browser display. Stopping the process and trying again does not work. Please advise

Prior to updating to V4, firefox worked perfectly with all my existing applications. After I updated it will not launch a browser page, even though the process is shown to be operable in the Task Manager. The same problem occurs on start-up of my computer, so there are no previous processes running.
I cannot launch the broswer at all so cannot try clearing the cache etc or other suggested troubleshooting solutions.

In the Task Manager, make sure to check both the Applications tab and the Processes tab. On the Processes tab, Firefox may have two different components running: firefox.exe and plugin-container.exe. Well, in 3.5.11, it would be only the first one.

I can't get the two finger scroll to work, I have changed the settings and it still does not work. What do I do?, I can't get the two finger scroll to work, I have changed the settings and it still does not work. What do I do?

How can I get the scroll to work?

Thanks for replying!
It's something else to try! I am quite savy, just frustrated over what should be a simple update!!!!!
I did however try and install iTunes 10.7 on a different computer, which is clean as I ran anitvirus on it this morning, prior to downloading itunessetup.exe and it did the same thing on there too.
Having spent nearly two days trawling the internet for help I am beginning to wonder if it is not a problem with 10.7 itself? Seems like quite a lot of people have the same issues as me....and it can't be the same thing on everyone's computer!
I will try the antivirus on my laptop and go from there!!!
Thanks again for your answer.

The back-and-forth bar does not come back when I reset to defaults. This problem is not solved.

Similar Messages

Maybe you are looking for