The backup disk image "/Volumes/3TB Seagate Expansion Drive-1/Toby's MacBook Air.sparsebundle" could not be created (error (null)).

Hi all,
Recently moved into a new place and now have my external HDD plugged into my iMac as a backup.
Just went to backup my MacBook Air, which has used the drive previously, but always through USB.
Now trying to backup wirlelessly so I do not need to remove from my iMac, but got this message:
The backup disk image “/Volumes/3TB Seagate Expansion Drive-1/Toby’s MacBook Air.sparsebundle” could not be created (error (null)).
Have tried to reset without success. Any suggestions?
Thanks

You might want to consider starting a new discussion. Since this one is marked solved, less people are likely to look at it. You can link to this one.
The same error message? Try hooking your backup drive to your computer and run Disk Utility Repair Disk and Repair Permissions.

Similar Messages

  • I keep getting the message "The backup disk image "/Volumes/Donald  Baker's Time Capsul/Donald Baker's iMac.sparsebundle" could not be accessed (error -1). does anyone know what this means? My time capsule refuses to back up.

    I keep getting the message "The backup disk image “/Volumes/Donald  Baker's Time Capsul/Donald Baker’s iMac.sparsebundle” could not be accessed (error -1). does anyone know what this means? My time capsule refuses to back up.

    Time Capsule and Time Machine master guru Pondini has all the answers.
    Check # C17 in his excellent support document Time Machine -- Troubleshooting.
    http://Pondini.org/TM/Troubleshooting.html

  • What do I do when I get this Time Machine message?  The backup disk image "/Volumes/Mark McConnell's Time Capsu/Mark's MacBook Pro.sparsebundle" is already in use.

    What do I do when I get this Time Machine error message?
    "The backup disk image “/Volumes/Mark McConnell's Time Capsu/Mark’s MacBook Pro.sparsebundle” is already in use."

    Unplug your Time Capsule from power. Wait 10 seconds and then power it on again. When the light goes green try backing up again.

  • The backup disk image "/Volumes/Data/MacBook Air.sparsebundle" could not be accessed (error (null)).

    just brought a new macbook air and time capsule. time machine keep returning the above msg.
    can somebody help?

    First, restart the Time Capsule by disconnecting the power adapter and reconnecting it. If other devices on the network can see it, you can skip this step.
    From the menu bar, select
     ▹ System Preferences ▹ Network
    Click the lock icon in the lower left corner of the window and authenticate to unlock the settings, if necessary. Click the Advanced button, then select the TCP/IP tab in the sheet that drops down. Click Renew DHCP lease.
    Try again to back up.
    If you still can't, open the Time Machine preference pane and delete the TC from the list of backup destinations. You may have to unlock the settings by clicking the lock icon in order to do this. Then add it back.

  • The backup disk image "/Volumes/Edward Malloy's Time Capsul/Edward's MacBook Pro.sparsebundle" is already in use., The backup disk image "/Volumes/Edward Malloy's Time Capsul/Edward's MacBook Pro.sparsebundle" is already in use.

    How do I delete the "open" backup?
    thanks in advance

    Please look over to the right of this page under the heading of More Like This for multiple answers and solutions.
    Or, see #C12 in Time Machine - Troubleshooting
    http://pondini.org/TM/Troubleshooting.html

  • Time Machine couldn't complete the backup to "Time Capsule. The backup disk image /Volumes/Data/MacBook Pro.sparsebundle could not be created (error 60)"

    We are Mountain Lion using Time Machine to backup to Time Capsule. When the backup tries to run, an error appears after a couple of minutes saying "The disk you inserted was not readable by this computer." Then an error shows up saying "Time Machine couldn't complete the backup to "Time Capsule.The backup disk image /Volumes/Data/MacBook Pro.sparsebundle could not be created (error 60)"
    I low level reformatted the Time Capsule and that didn't fix it. I then tried using Time Machine on another computer to back up to that same Time Capsule and it worked- so I'm doubting it's the Time Capsule.
    I've noticed that when Time Machine runs, that a  folder called Data  at /Volumes/ appears while Time Machine is trying to back up. I think it's making the sparsebundle to transfer to the Time Capsule.
    However, after a couple of minutes- it comes back saying that the disk is unreadable.
    I think it's something wrong with either creating the sparsebundle or opening the disk image that seems to be a part of the Time Machine backup process on the local drive. 
    I am able to create a disk image with Disk Utilitiy without any problem on that system. I've repaired the disk and disk permissions with Disk Utility and replaced the directory with Disk Warrior. I've trashed what preference files I could find and restarted. I've completely removed the backup destination from the computer and added it back again.
    Help!
    Thanks,
    Neil

    neillhowell wrote:
    I've noticed that when Time Machine runs, that a  folder called Data  at /Volumes/ appears while Time Machine is trying to back up. I think it's making the sparsebundle to transfer to the Time Capsule.
    Yes, exactly.  It makes one sparse bundle per Mac.
    It's possible the TC's disk is too full for a new sparse bundle, or there may be some other problem.
    Via the Finder, locate the existing sparse bundle (see the pink box in Time Machine - Frequently Asked Question #17 if you're not sure how to do that).  See how large it is (plus how large anything else that may be there).  If the total is very near the size of the TC, that may be the problem.
    If not, a clue may be lurking in your logs.  Use the widget in #A1 of Time Machine - Troubleshooting to display the backup messages from your logs.  Locate the backup in question (probably the first one displayed), then copy and post all the messages here.

  • Error: the backup disk image "/Volumes/Data/David's MacBook Air.sparsebundle" could not be accessed (error -1).

    okay all of a sudden my TC 2 TB is not backing up. 
    O/S Lion
    macbook air late 2011 model
    error: he backup disk image “/Volumes/Data/David’s MacBook Air.sparsebundle” could not be accessed (error -1).
    i don't see a sparse bundle file by name per se anywhere.
    Also what is new: as soon as time machine auto kicks off or I manual kick it of, it opens a new window which contains one folder (my backup fies from other days)  the files are "there", but I cannot successfully back up now?
    i don't see a sparse bundle file by name per se anywhere.
    Also what is new: as soon as time machine auto kicks off or I manual kick it of, it opens a new window which contains one folder (my backup fies from other days)  the files are "there", but I cannot successfully back up now???

    New 2 tb time capsule with air extreme built in.  I can surf the net wirelessly through this device. And it had been backing up all along then a few days ago it stopped and reported that error. 

  • Purchased a new Macbook Pro 13". I used migration assistant to transfer. I can't backup to time capsule.  I am getting on error The backup disk image "/Volumes/Herb's Time Capsul/Herb MacBook Pro.sparsebundle" could not be created (error 17).  Help

    Purchased a new Macbook Pro 13". I used migration assistant to transfer. I can't backup to time capsule.  I am getting on error "The backup disk image “/Volumes/Herb's Time Capsul/Herb MacBook Pro.sparsebundle” could not be created (error 17).  Help!

    Launch the Keychain Access application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Keychain Access in the page that opens.
    Select the System keychain in the list of keychains in the sidebar of the window. If you don't see the list, click the down-arrow icon below the sidebar.
    Then select Passwords in the Category list at lower left. Click the Kind heading in the list of keychain items to arrange it by Kind.
    Locate the AirPort Disk Password with the name of your Time Capsule. Double-click the item and check the box marked Show Password in the inspector window that opens. You'll be prompted for the administrator login password. Make a note of the AirPort password, then close the inspector window and delete the item.
    Also delete any other AirPort DIsk Password items for that same Time Capsule, which may have had a different name in the past.
    Quit Keychain Access and try again to back up.

  • HT3275 TIME MACHINE ERROR: The backup disk image "/Volumes/Data/Sean McGuire's MacBook Pro.sparsebundle" could not be created (error 1).

    I can select a disk (Time Capsule) and initiate the backup.  It only "waits to back up" then "making backup disk available" and remains frozen there.  I tried to update the software a while back and was unsuccessful, I think that may be the issue.
    Any insight would be greatly appreciated.  This is the error message I receive.
    TIME MACHINE ERROR: The backup disk image “/Volumes/Data/Sean McGuire’s MacBook Pro.sparsebundle” could not be created (error 1).
    Thanks

    See #C17 in Pondini's excellent support document Time Machine - Troubleshooting
    http://pondini.org/TM/Troubleshooting.html

  • The backup disk image "/volumes/data/GuisselleiMac.sparsebundle" could not be created error null

    Hello...
    I just got my first 2tb TimeCapsule (TC). Unfortunately, it is not backing up!! I keep on getting the message "the backup disk image "/volumes/data/GuisselleiMac.sparsebundle" could not be created (error (null))"
    I've looked in many websites but can't find a solution... I've tried re-setting the TC to original settings, turning my Mac off and on, changing the name of my mac, changing the name of my mac on the network, nothing works!!!
    My TC is connected with an ethernet cable to a linksys router wich is connected to the cable modem, so it is in bridge mode. I have not connected the TC to my mac, I don't think this is necessary..
    Can someone help me please!!!

    My TC is connected with an ethernet cable to a linksys router wich is connected to the cable modem, so it is in bridge mode. I have not connected the TC to my mac, I don't think this is necessary..
    Your TC is not directly connected to the Mac and unfortunately it does seem to matter.
    The reason the TC fails is not entirely clear but it has to do with Mavericks.
    Let me recommend you test what happens with the TC reset and plugged directly into the Mac by ethernet.
    You will need to run it in router mode. Ignore all the errors and see if it now works.
    The other suggestion is to manually mount the TC hard disk
    First of all find it in the network via network utility.
    Run netstat and get the current routing table.
    Locate your TC on it.. On mine above it shows as tcgen4.local
    So in Finder top menu.. Go > Connect to Server.
    Type in AFP://TCnetworkname.local (exactly as it appears in netstat)
    Or use the IP address.. the problem is that in your setup it is probably not fixed.
    The current IP can be found by pinging the name. So ping in a terminal or in network utility.
    ping tcgen4
    ping: cannot resolve tcgen4: Unknown host
    Note how you must use the full domain.
    ping tcgen4.local
    PING tcgen4.local (192.168.2.201): 56 data bytes
    64 bytes from 192.168.2.201: icmp_seq=0 ttl=255 time=4.160 ms
    64 bytes from 192.168.2.201: icmp_seq=1 ttl=255 time=3.742 ms
    64 bytes from 192.168.2.201: icmp_seq=2 ttl=255 time=3.332 ms
    64 bytes from 192.168.2.201: icmp_seq=3 ttl=255 time=3.785 ms
    ^C
    --- tcgen4.local ping statistics ---
    4 packets transmitted, 4 packets received, 0.0% packet loss
    round-trip min/avg/max/stddev = 3.332/3.755/4.160/0.293 ms
    So you have now established the IP..
    And type that in.
    AFP://192.168.2.201 (or whatever shows).
    Once you have mounted the disk .. delete the old Time Machine setup as per A4 in Pondini.. and set up again.
    It should work.. but I strongly recommend a direct link to the TC.

  • HT3275 The backup disk image "/Volumes/terry bostock's Time Capsul/terry bostock's iMac.sparsebundle" is already in use.

    I,m getting this message, The backup disk image “/Volumes/terry bostock's Time Capsul/terry bostock’s iMac.sparsebundle” is already in use. What does this mean. I've upgraded to Mountain Lion, but it was ok till recently.

    A constant bug in Mountain Lion.
    Usually, simply powering off the Time Capsule, waiting a few minutes, and starting it back up will reset the network connection.
    Give that a try first.

  • HT3275 I just brought a New Macbook Pro and was successful in transfering data from my old macbook. However when I try to back up to my time capsule I receive this message. "The backup disk image "/Volumes/Salvatore Totino's Time Cap/Lorraine's MacBook Pr

    I just brought a New Macbook Pro and was successful in transfering data from my old macbook. However when I try to back up to my time capsule I receive this message. "The backup disk image “/Volumes/Salvatore Totino's Time Cap/Lorraine’s MacBook Pro.spars

    You may need to reset TM and start with a fresh full backup.
    For the particular error see
    http://pondini.org/TM/Troubleshooting.html

  • I have swtiched to Lion and now my backup to Airport is not working. Error - The backup disk image "/Volumes/Data/Anik Karimjee's MacBook Air.sparsebundle" could not be accessed (error -1).

    Hi
    I have a time capsule that has been working fine, but I swtiched to Lion and now get this error with no help?
    The backup disk image “/Volumes/Data/Anik Karimjee’s MacBook Air.sparsebundle” could not be accessed (error -1).

    See # C17 in Pondini's excellent support document Time Machine -- Troubleshooting
    http://pondini.org/TM/Troubleshooting.html

  • I got this error while my mac was backing up to time machine: he backup disk image "/Volumes/Data/Sanjeev's iMac.sparsebundle" could not be created (error (null)). Please could someone help

    I got this error while my mac was backing up to time machine: he backup disk image “/Volumes/Data/Sanjeev’s iMac.sparsebundle” could not be created (error (null)). Please could someone help

    Has the backup been working ok??
    If that is the case simply reboot the TC.. or if that fails, reboot the whole network, restarting in correct order..
    modem.. wait 2min
    TC.. wait 2min

  • HT201250 My Time Machine is not backing up and gives me this error report, 'The backup disk image "/Volumes/Data/Valarie'siMac.sparsbundle" is already in use.  Time machine could not complete backup.    Can anyone help me?

    My Time Machine is not backing up and gives me this error report:
    The backup disk image "/Volumes/Data/Valarie'siMac.sparsbundle" is already in use
    Time Machine could not complete backup
    Can anyone help me?

    Look at the discussion on the following forum:
    https://discussions.apple.com/thread/3882138?start=0&tstart=0
    The responses given there may help.

Maybe you are looking for

  • Object GC'ed out of JNDI?

    Folks, We've experienced some bizarre behavior within one of our EJB's and its interactions with JNDI during our performance testing effort. We've developed a theory, and we're currently developing a test case for it, but I wanted to post it here and

  • VO Substitution : JBO-25006 : Invalid parameter value passed for source

    Hello All, I want to add 2 new fields (attribute columns) to an existing VO for which I am trying to use VO substitution. I have followed these steps. 1.     Downloaded all the class files from server to local machine 2.     Opened an OA project and

  • Do I need to have studio monitors?

    Being one day in to logic (Oh man is it overwhelming), do I need studio monitors? My problem being is that I start to create a track and then when I go to playback, I get nothing from my speakers. Do I need to change a setting or am I a complete idio

  • No batches/stocks were found - determination is performed online MFBF

    Hi Gurus, Can anybody please help me why we are getting this message in MFBF. When the user is trying to turn in production for material A in MFBF, and when they hit post with correction in the home screen of MFBF, in the next screen the system gives

  • Pearl 8100 media volume adjust

    Hi my bb pearl's + volume button on the right top corner doesn't seem to work anymore. the - key seems to work. So I can no longer bring up the volume of my music/video/media when I am playing it. Is there any other way of changing volume within the