The backup disk image "/Volumes/Data/Jasmina Boskovic Petrovic's MacBook Pro.sparsebundle" is already in use. I have the same problem went to genius bar and they said it may be TC? but all the problems started when I added ML.... how do I downgrade?
I need help ever since I have upgraded to ML I have problems with my computer, cannot back up; my files have changed and when I save it does not go where it is supposed to go... how do I downgrade?
To go back, reinstall from your last Lion or Snow Leopard backup.
Similar Messages
-
For the past couple weeks, my Time Machine has not been backing up file from my MacBook Pro. I've had the Time Capsule for a couple years now. Entering the Time Machine I discovered that there are no files before "yesterday" yet there are only 161.0 GB of 998.06 GB available. A "Failed" message apprears with a popup message: "The backup disk image “/Volumes/ELBs Time Ca/ELB’s MacBook Pro.sparsebundle” is already in use." How can it be in use when Time Machine takes hours looking for the device?
Another error code message also pops up from time to time: Finder error code -6584. What is that? And how is it fixed?
All software is up to date on this computer and Time Capsule.Further to my earlier response (system re-start and firmware update resulted in full Time Machine backup) I waited until the next scheduled backup to determine success.
As it has turned out, the Time Machine's next backup was for 48 kb and ran for eight hours! The progress bar was complete (solid blue) and I therefore stopped the backup. It has been "stopping backup" for the past hour.
What is wrong with this process? -
This is coming in off of my time capsule.....The backup disk image “/Volumes/Data-2/My Name iMac.sparsebundle” is already in use. What does it mean?
Try rebooting your whole network
modem > Time Capsule > and then clients withing a couple of minutes in between and see if that fixes it. -
Purchased a new Macbook Pro 13". I used migration assistant to transfer. I can't backup to time capsule. I am getting on error "The backup disk image “/Volumes/Herb's Time Capsul/Herb MacBook Pro.sparsebundle” could not be created (error 17). Help!
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the page that opens.
Select the System keychain in the list of keychains in the sidebar of the window. If you don't see the list, click the down-arrow icon below the sidebar.
Then select Passwords in the Category list at lower left. Click the Kind heading in the list of keychain items to arrange it by Kind.
Locate the AirPort Disk Password with the name of your Time Capsule. Double-click the item and check the box marked Show Password in the inspector window that opens. You'll be prompted for the administrator login password. Make a note of the AirPort password, then close the inspector window and delete the item.
Also delete any other AirPort DIsk Password items for that same Time Capsule, which may have had a different name in the past.
Quit Keychain Access and try again to back up. -
The red i error message I am getting is not mentioned in this article. This time capsule backed up fine for months before yesterday.
That is due to the rather embarassing nature of the fix.
Pull out the power cord from the TC.. count to 10.. plug in the power cord.
That fixes it in 98% of cases.
If not use Pondini troubleshooting
http://pondini.org/TM/Troubleshooting.html
And C12. -
MacPro backed up to Time Machine, added Mac Mini now get "The backup disk image “/Volumes/Data/Jerry Booher’s MacBook Pro.sparsebundle” is already in use." error when Mac Pro tries to back up
It is standard Mountain Lion error due to the networking ability which is comparable to wet string. (actually that was lion.. it dried out some with Mountain Lion.. higher in the hills perhaps!!)
See C12 and C17
http://pondini.org/TM/Troubleshooting.html
But many people are suffering the same issue..
And the above is even a little out of date.. you might need to do a reset to the TC.
Welcome to Apple's beta program for everyone. -
I get an error when trying to back up on my TC. Message says - The backup disk image “/Volumes/Data/Macintosh.sparsebundle” could not be accessed (error -1).
Any suggestionsSee here...
https://discussions.apple.com/message/20933934#20933934 -
When I try to backup I get the error message.The backup disk image"/Volumes/Data/iMac.sparsebundle" could not be accessed(error-1) Any Ideas? it was working fine and i can't think of any changes I made to the system to affect this?
Start with the best resource available..... Time Machine --- Troubleshooting from Pondini, the wizard of all things Time Machine.
" . . . sparse bundle could not be accessed (error -1)" -
I keep getting this error when trying to backup time capsule with time machine. The backup disk image “/Volumes/Data-1/Dan’s iMac.sparsebundle” is already in use.
Make sure that no other Macs are backing up at the time.
Pull the power cable from the back of the Time Capsule
Count to ten
Plug the power cable back into the back of the Tme Capsule
Wait a few minutes, then try a backup again. -
When my time machine tries to backup to my time capsule I get the following message"The backup disk image “/Volumes/Data/Kent’s MacBook Pro.sparsebundle” is already in use. " What do I need to do to fix this?
Restart the Time Capsule.
-
What do I do when I get this message on my Time Machine? "The backup disk image “/Volumes/Data/Jeanne’s iMac.sparsebundle” is already in use."
See C12.
Time Machine Troubleshooting -
When i try to use time Machine for my backup i get this message: The backup disk image "volume/data/AnnePrybyla's imac.sparsebundle is already in use. What can i do
Look over to the right of this page under the heading of More Like This for multiple answers and solutions to this bug.
-
My backup got interrupted and now when I try to backup I get the following message: The backup disk image “/Volumes/Data/Macintosh.sparsebundle” is already in use. What should I do so that I can start backing up again?
1. Restart your MBP and try the back up again. If this fails try step #2 below
2. Unplug your Time Capsule from the AC giving it thirty seconds or so to discharge, plug it back in and retry the back up again once you're back online.
3. if step #1 and #2 fails, go here:
http://pondini.org/TM/C12.html -
The auto backup to my time machine has developed a glitch which prevents the backing up of the iMac. The message is as follows:
'The backup disk image "/volumes/data/Name iMac(7).sparsebundle" is already in use.
Any ideas on how to fix.Welcome to Apple Support Communities
Restart the iMac and Time Capsule. In most of the cases, this should solve that problem. If it doesn't work, read > http://pondini.org/TM/C12.html -
For the past several days, I have been getting this message during backups:
Time Machine could not complete the back up. The backup disk image "Volumes/Data/bhoppy2's iMac.sparsebundle" could not be accessed (error-1). When I click on the 'help' icon on the message, it reverts to a blank page, and I cannot find anything online regarding the term 'sparsebundle.' In addition, I cannot access previous backups any longer.
Help?See C17 in Time Machine Troubleshooting by Time Machine guru Pondini:
http://pondini.org/TM/Troubleshooting.html
Maybe you are looking for
-
Color change of a field in ALV Grid Control
Hi, One small help needed.... My req is explained below: I have 3 fields empno, ename and deptno. and the records of these fields would be displayed in ALV grid control. When I hover the mouse on ename field, the color of the complete field should ch
-
IPod Touch (4th generation) won't connect to wifi! Please help!
My iPod Touch (4th generation) won't connect to my house wifi that it's always connected to. I tried forgetting the network, and putting the password in again, several times. I've tried restarting my iPod, turning the wifi on & off, and also turning
-
Accounting for code based consumable material in SAP
Hi Experts, Just a scenario I want to discuss with You all: Earlier were using non-stock items (no material code,only text to procure materials) and projects were consuming it. Now, we are going to use material codes to procure non-stock items which
-
good morning to all I do not speak English well sorry Apple TV model A1469 I connect to the wifi modem and imposed apple id account ok I see movie photos, and music ok I play songs streaming from wifi mac 10.8.5 itunes11.1.4 ok after two minutes goes
-
Recon account ready for Input-Not possible to change during MIRO
Hello We are on ECC 6.0 System does not allow users to change Vendor Recon A/c during invoice verification through MIRO. Recon A/c field is greyed out under Details tab in MIRO. Recon Account has been declared as Ready for Input and Alternative Recon