The backup location does specified does not contain any backup. Specify another backup location.

We have our server set to backup to an internal HDD (E:), and then copy all the files in E: to different locations for storage (a NAS for instance).  I scheduled a copy to a USB drive, but I can't get the recovery wizard to see the backup it now contains. 
I choose "A backup stored in another location" and then "Remote shared folder", as the USB (G:) does not show up in Local drives.  I now need to enter a UNC (it won't accept the "G:\" path), so I shared the USB drive and
enter "\\SERVER\G\2014-09-23", which is the path to the parent of the WindowsImageBackup folder on the USB drive.  At this point I get the above error "The backup location does specified does not contain any backup"
All the files look to have copied OK, and have the same Date Modified as on the server: as far as I can tell it's identical, and yet it won't mount. Help?

Hi,
I would like to confirm the exact backup process:
When creating the backup, are you choosing "local drives" and then "G:", or Remote shared folder and then \\server\g\folder?
If it is a network path, could you restore it with \\server\g\folder instead?
If you have any feedback on our support, please send to [email protected]

Similar Messages

  • File Screening Audit Report does not contain any data : report statistics is empty

    Hi ,
     I have enabled File screen audit and Record file screening activity in auditing database options in file server 2008. 
    I am getting details of file screen audit in Event log  , But incident report file screen audit report does not contain any value.
    Getting report for each incident of file screen audit  , But it does not contain any data in report statistics.
    Data available in scheduled report of file screen audit.. not available in incident report only..
    Please assist...
    Thanks,
    Vasanth.M
    Thanks, Vasanth.M.

    Please note that, If the Record file screening activity in the auditing database check box is cleared, the File Screening Audit Reports will not contain any information. To configure file screen audit, I would refer you on this informative
    technet library :
    https://technet.microsoft.com/en-us/library/cc754540.aspx
    Carlo

  • Managed System Configuration ! The table does not contain any data !

    Hi,
    In Sol Man Setup , Managed System Configuration, in phase 6 - Create Logical Componets -
    There is no Product Version and Product Instance Available.
    The message is :  " The table does not contain any data "
    How can correct this problem ?
    Thanks

    Hi,
    while creating new Logical Component via SMSY , you need to specify Product first.
    e.g. if you managed system is ERP 6.0 , select Product as SAP ERP
    once you select Product , it automatically fetches information for product Version and Main Instance depending upon Product field input.
    Please check and let us know if issue still persits.
    Thanks,
    Rupali

  • Error:The node does not contain any elements

    Hi Experts,
    I am getting this error.
      The following error text was processed in the system SR6 :  The node does not contain any elements. COMPONENTCONTROLLER.1.ROADMAP
    The error occurred on the application server server6_SR6_00 and in the work process 0 .
    The termination type was: RABAX_STATE
    The ABAP call stack was:
          Method: RAISEELEMENT_NOT_FOUND of program CL_WDR_CONTEXT_NODE===========CP
          Method: IF_WD_CONTEXT_NODE~SET_STATIC_ATTRIBUTES of program CL_WDR_CONTEXT_NODE_VAL=======CP
          Method: WDDOINIT of program /1BCWDY/G25NECI0LTPP66VI3KOI==CP
          Method: IF_WDR_COMPONENT_DELEGATE~WD_DO_INIT of program /1BCWDY/G25NECI0LTPP66VI3KOI==CP
          Method: DO_INIT of program CL_WDR_DELEGATING_COMPONENT===CP
          Method: INIT_CONTROLLER of program CL_WDR_CONTROLLER=============CP
          Method: INIT_CONTROLLER of program CL_WDR_COMPONENT==============CP
          Method: INIT of program CL_WDR_CONTROLLER=============CP
          Method: INIT of program CL_WDR_CLIENT_COMPONENT=======CP
          Method: INIT of program CL_WDR_CLIENT_APPLICATION=====CP
    What is the problem here?
    Thank you.
    Lalitha.

    (Assuming you have created elements for node...)
    Definitely it is cardinality problem, please check that... Try to understand below points to avoid such error.
    When a node is created in the context of a Web Dynpro component, the cardinality of the node is specified. The cardinality defines how often a node is to be instantiated at runtime u2013 that is, how many elements of this node are available at runtime.
    u2022        1u20261          Only one element is instantiated.
    u2022        0u20261          At runtime, no more than one element is instantiated, but it is also possible that no element is instantiated.
    u2022        1u2026n          n elements can be instantiated, but at least one element must be instantiated.
    u2022        0u2026n          The number of instantiated elements of the context node can vary.
    The cardinalities 0..n and 1..n correspond to the declaration of an internal table. The cardinality 1..1 corresponds to the declaration of a structure.
    Thanks,
    Swanand.

  • BI Publisher Word Template The report does not contain any data fields.

    I have OBIEE BI Publisher report (10.3.4) working fine using BIP but using MS Word 2003 I want to create new template and want to add charts etc.
    Step 1. In MS Word I successfully login Oracle BI Publisher as Administrator
    2. Oracle BI Publisher -> Open (I open the report)
    3. Go to Insert -> Table Wizard
    I get this error:
    The report does not contain any data fields. Please make sure that the reports generates data with the default settings or provide a valid XML file.
    Please help

    Hi
    How do I load XML data? Also why XML data load is required? Do I have to export XML data from BIP View screen and load from the same file from the word?
    Please clarify
    Thanks

  • Unable to load the EJB module. DeploymentContext does not contain any EJB.

    I'm writing an enterprise application to familiarize myself with Glassfish 3.1.2 and EJB 3.1. I've created several local, stateless beans, and injected one into a JSF managed bean. The ejb and web modules compile fine, but when I launch the application with Glassfish I get the following startup error and the application does not deploy. I don't understand what it means, can someone ellaborate?
    SEVERE: Exception while invoking class org.glassfish.ejb.startup.EjbDeployer prepare method
    SEVERE: Exception while invoking class org.glassfish.javaee.full.deployment.EarDeployer prepare method
    SEVERE: Exception while preparing the app
    SEVERE: Unable to load the EJB module. DeploymentContext does not contain any EJB. Check the archive to ensure correct packaging for D:\Documents\NetBeansProjects\Test\dist\gfdeploy\Test\Test-war_war.
    If you use EJB component annotations to define the EJB, and an ejb or web deployment descriptor is also used, please make sure that the deployment descriptor references a Java EE 5 or higher version schema, and that the metadata-complete attribute is not set to true, so the component annotations can be processed as expected
    org.glassfish.deployment.common.DeploymentException: Unable to load the EJB module. DeploymentContext does not contain any EJB. Check the archive to ensure correct packaging for D:\Documents\NetBeansProjects\Test\dist\gfdeploy\Test\Test-war_war.
    If you use EJB component annotations to define the EJB, and an ejb or web deployment descriptor is also used, please make sure that the deployment descriptor references a Java EE 5 or higher version schema, and that the metadata-complete attribute is not set to true, so the component annotations can be processed as expected
         at org.glassfish.javaee.full.deployment.EarDeployer.prepare(EarDeployer.java:166)
         at com.sun.enterprise.v3.server.ApplicationLifecycle.prepareModule(ApplicationLifecycle.java:871)
         at com.sun.enterprise.v3.server.ApplicationLifecycle.deploy(ApplicationLifecycle.java:410)
         at com.sun.enterprise.v3.server.ApplicationLifecycle.deploy(ApplicationLifecycle.java:240)
         at org.glassfish.deployment.admin.DeployCommand.execute(DeployCommand.java:389)
         at com.sun.enterprise.v3.admin.CommandRunnerImpl$1.execute(CommandRunnerImpl.java:348)
         at com.sun.enterprise.v3.admin.CommandRunnerImpl.doCommand(CommandRunnerImpl.java:363)
         at com.sun.enterprise.v3.admin.CommandRunnerImpl.doCommand(CommandRunnerImpl.java:1085)
         at com.sun.enterprise.v3.admin.CommandRunnerImpl.access$1200(CommandRunnerImpl.java:95)
         at com.sun.enterprise.v3.admin.CommandRunnerImpl$ExecutionContext.execute(CommandRunnerImpl.java:1291)
         at com.sun.enterprise.v3.admin.CommandRunnerImpl$ExecutionContext.execute(CommandRunnerImpl.java:1259)
         at com.sun.enterprise.v3.admin.AdminAdapter.doCommand(AdminAdapter.java:461)
         at com.sun.enterprise.v3.admin.AdminAdapter.service(AdminAdapter.java:212)
         at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:179)
         at com.sun.enterprise.v3.server.HK2Dispatcher.dispath(HK2Dispatcher.java:117)
         at com.sun.enterprise.v3.services.impl.ContainerMapper$Hk2DispatcherCallable.call(ContainerMapper.java:354)
         at com.sun.enterprise.v3.services.impl.ContainerMapper.service(ContainerMapper.java:195)
         at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:860)
         at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:757)
         at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:1056)
         at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFilter.java:229)
         at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultProtocolChain.java:137)
         at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:104)
         at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:90)
         at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java:79)
         at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextTask.java:54)
         at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.java:59)
         at com.sun.grizzly.ContextTask.run(ContextTask.java:71)
         at com.sun.grizzly.util.AbstractThreadPool$Worker.doWork(AbstractThreadPool.java:532)
         at com.sun.grizzly.util.AbstractThreadPool$Worker.run(AbstractThreadPool.java:513)
         at java.lang.Thread.run(Thread.java:722)

    My guess is that you deployed an ejb without bean in it. when you have an ejb module, be sure you have at least one bean present.
    Are you sure you have implementend some beans? Or did you do this only in the web module?
    Try adding an @Stateless bean doing nothing in you ejb module, redeploy and let me know if that works

  • Get an Error window, The source folder does not contain any supported camera raw files

    I am using CS2 and it would not open up my latest RAW files, I was getting a warning Could not complete your request because it is not the right kinds of document. So, I checked the Camera Raw Plug-in and it says Version 3.7. I see that my camera an Olympus E-20 is supported. But it is not opening the Raw files, the day before I took jpeg and they have opened. I will not trash my Adobe Photoshop CS2 because it was a royal pain to install and I don't know where the CD is.
    I installed the latest DNG Converter and when I try to open up the folder which has all the RAW images that didn't open in Adobe, I still get an Error window that says, "The source folder does not contain any supported camera raw files." Why? It says it supports my Olympus E-20. I actually have the E-20n, I don't think that is the problem. My RAW icons usually show up as small image thumbnails and this time they are gray icons only with the incorrect date under the icon. Is there another product I can use without spending money? These images I took in RAW were special and I don't want to lose them. Please help!
    Esther

    Hello, I was using only CS2 with my Olympus E-20n for 5 years, no problem. It just started acting up in RAW this year. I downloaded Picasa that same day and now it seems to be opening up all of my RAW files that didn't open the other day. So, I think Picasa installed a new plug-in adaption to CS2 because now all my RAW icons have a new logo on them, the same one that's in Picasa. Strange, but it works now and I am not complaining anymore. I love CS2 and the many ways I can adjust RAW files, so I am using it, Picasa is a sideline now that I can take a look at many thumbnails and it organized all my photo files by the year and folders. Amazing free software. I have probably 60,000 images in my computer and an external hard drive and Picasa picked them all up and made a library, cool.

  • Stack file that is generated does not contain any java components

    We are in process of upgrading our ecc6.0 system with ehp4. The enhancement is stuck up in configuration phase for JAVA. Though we have configured Java in solution manager the stack file that is generated does not contain any java components and so the installation is stuck up. Kindly request you to advice us on this issue .
    Attached is the 'Trouble Ticket Report', PREPARE_JSPM_QUEUE_CSZ_01.LOG, and SMSDXML_EA4_20100623144541.375.txt
    ++++
    Trouble Ticket Report
    Installation of enhancement package 1 for SAP NetWeaver 7.0
    SID................: EA4
    Hostname...........: wipro
    Install directory..: e:/usr/sap/EA4
    Upgrade directory..: F:\EHPI\java
    Database...........: Oracle
    Operating System...: NT
    JDK version........: 1.6.0_07 SAP AG
    SAPJup version.....: 3.4.29
    Source release.....: 700
    Target release.....: 700
    Start release SP...: $(/J2EE/StandardSystem/SPLevel)
    Target release SP..: $(/J2EE/ShadowSystem/SPLevel)
    Current usages.....:
    ABAP stack present.: true
    The execution of PREPARE/INIT/PREPARE_JSPM_QUEUE ended in error.
    The stack E:\usr\sap\trans\EPS\SMSDXML_EA4_20100625054857.968.xml contains no components for this system.
    More information can be found in the log file F:\EHPI\java\log\PREPARE_JSPM_QUEUE_CSZ_02.LOG.
    Use the information provided to trouble-shoot the problem. There might be an OSS note providing a solution to this problem. Search for OSS notes with the following search terms:
    com.sap.sdt.j2ee.phases.PhaseTypePrepareJSPMQueue
    com.sap.sdt.ucp.phases.PhaseException
    The stack E:\usr\sap\trans\EPS\SMSDXML_EA4_20100625054857.968.xml contains no components for this system.
    PREPARE_JSPM_QUEUE
    INIT
    NetWeaver Enhancement Package Installation
    SAPJup
    Java Enhancement Package Installation
    ++++++
    PREPARE_JSPM_QUEUE_CSZ_01.LOG>>
    <!LOGHEADER[START]/>
    <!HELP[Manual modification of the header may cause parsing problem!]/>
    <!LOGGINGVERSION[2.0.7.1006]/>
    <!NAME[F:\EHPI\java\log\PREPARE_JSPM_QUEUE_CSZ_01.LOG]/>
    <!PATTERN[PREPARE_JSPM_QUEUE_CSZ_01.LOG]/>
    <!FORMATTER[com.sap.tc.logging.TraceFormatter(%d [%s]: %-100l [%t]: %m)]/>
    <!ENCODING[UTF8]/>
    <!LOGHEADER[END]/>
    Jun 28, 2010 9:21:23 AM [Info]:                      com.sap.sdt.ucp.phases.AbstractPhaseType.initialize(AbstractPhaseType.java:754) [Thread[main,5,main]]: Phase PREPARE/INIT/PREPARE_JSPM_QUEUE has been started.
    Jun 28, 2010 9:21:23 AM [Info]:                      com.sap.sdt.ucp.phases.AbstractPhaseType.initialize(AbstractPhaseType.java:755) [Thread[main,5,main]]: Phase type is com.sap.sdt.j2ee.phases.PhaseTypePrepareJSPMQueue.
    Jun 28, 2010 9:21:23 AM [Info]:                   com.sap.sdt.ucp.phases.AbstractPhaseType.logParameters(AbstractPhaseType.java:409) [Thread[main,5,main]]:   Parameter inputFile=EHPComponents.xml
    Jun 28, 2010 9:21:23 AM [Info]: com.sap.sdt.j2ee.phases.jspm.JSPMQueuePreparatorFactory.createJSPMQueuePreparator(JSPMQueuePreparatorFactory.java:93) [Thread[main,5,main]]: Creating JSPM SP Stack  queue preparator.
    Jun 28, 2010 9:21:24 AM [Info]: com.sap.sdt.ucp.dialog.elim.DialogEliminatorContainer.canBeOmitted(DialogEliminatorContainer.java:96) [Thread[main,5,main]]: Dialog eliminator spStackDialogEliminator allows to omit dialog SPStackLocationDialog
    Jun 28, 2010 9:21:24 AM [Info]:                  com.sap.sdt.util.validate.ValidationProcessor.validate(ValidationProcessor.java:97) [Thread[main,5,main]]: Validatable parameter SP/STACK/LOCATION has been validated by validator RequiredFields.
    Jun 28, 2010 9:21:24 AM [Info]:                  com.sap.sdt.util.validate.ValidationProcessor.validate(ValidationProcessor.java:97) [Thread[main,5,main]]: Validatable parameter SP/STACK/LOCATION has been validated by validator SPStackLocationValidator.
    Jun 28, 2010 9:21:24 AM [Info]: com.sap.sdt.j2ee.phases.jspm.JSPMSpStackQueuePreparator.createQueue(JSPMSpStackQueuePreparator.java:107) [Thread[main,5,main]]: Using SP Stack E:\usr\sap\trans\EPS\SMSDXML_EA4_20100625054857.968.xml.
    Jun 28, 2010 9:21:24 AM [Info]:                   com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseStackTag(SPXmlParser.java:488) [Thread[main,5,main]]: STACK-SHORT-NAME tag is missing. The CAPTION of the stack will be used as stack name.
    Jun 28, 2010 9:21:24 AM [Info]:                   com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseStackTag(SPXmlParser.java:582) [Thread[main,5,main]]: PRODUCT-PPMS-NAME tag is missing. The CAPTION of the product will be used as product PPMS name.
    Jun 28, 2010 9:21:24 AM [Info]:                      com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseSPXml(SPXmlParser.java:424) [Thread[main,5,main]]: Parsing of stack definition file E:\usr\sap\trans\EPS\SMSDXML_EA4_20100625054857.968.xml has finished.
    Jun 28, 2010 9:21:24 AM [Error]:                       com.sap.sdt.ucp.phases.AbstractPhaseType.doExecute(AbstractPhaseType.java:863) [Thread[main,5,main]]: Exception has occurred during the execution of the phase.
    Jun 28, 2010 9:21:24 AM [Error]: com.sap.sdt.j2ee.phases.jspm.JSPMSpStackQueuePreparator.createQueue(JSPMSpStackQueuePreparator.java:136) [Thread[main,5,main]]: The stack E:\usr\sap\trans\EPS\SMSDXML_EA4_20100625054857.968.xml contains no components for this system.
    Jun 28, 2010 9:21:24 AM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:906) [Thread[main,5,main]]: Phase PREPARE/INIT/PREPARE_JSPM_QUEUE has been completed.
    Jun 28, 2010 9:21:24 AM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:907) [Thread[main,5,main]]: Start time: 2010/06/28 09:21:23.
    Jun 28, 2010 9:21:24 AM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:909) [Thread[main,5,main]]: End time: 2010/06/28 09:21:24.
    Jun 28, 2010 9:21:24 AM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:910) [Thread[main,5,main]]: Duration: 0:00:00.781.
    Jun 28, 2010 9:21:24 AM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:911) [Thread[main,5,main]]: Phase status is error.
    ++++++++++++++++++++++
    [stack xml data: version=1.0]
    [SPAM_CVERS]
    ST-PI                         2005_1_7000006
    LSOFE                         600       0015
    SAP_AP                        700       0015
    SAP_BASIS                     701       0003
    SAP_ABA                       701       0003
    SAP_BW                        701       0003
    PI_BASIS                      701       0003
    PLMWUI                        700       0002
    SAP_APPL                      604       0002
    EA-APPL                       604       0002
    SAP_BS_FND                    701       0002
    EA-IPPE                       404       0002
    WEBCUIF                       700       0002
    INSURANCE                     604       0002
    FI-CA                         604       0002
    ERECRUIT                      604       0002
    ECC-DIMP                      604       0002
    EA-DFPS                       604       0002
    IS-UT                         604       0002
    IS-H                          604       0003
    EA-RETAIL                     604       0002
    EA-FINSERV                    604       0002
    IS-OIL                        604       0002
    IS-PRA                        604       0002
    IS-M                          604       0002
    SEM-BW                        604       0002
    FINBASIS                      604       0002
    FI-CAX                        604       0002
    EA-GLTRADE                    604       0002
    IS-CWM                        604       0002
    EA-PS                         604       0002
    IS-PS-CA                      604       0002
    EA-HR                         604       0005
    SAP_HR                        604       0005
    ECC-SE                        604       0002
    [PRDVERS]                                  
    01200314690900000432SAP ERP ENHANCE PACKAGE       EHP2 FOR SAP ERP 6.0          sap.com                       EHP2 FOR SAP ERP 6.0                                                    -00000000000000
    01200314690900000463SAP ERP ENHANCE PACKAGE       EHP4 FOR SAP ERP 6.0          sap.com                       EHP4 FOR SAP ERP 6.0                                                    -00000000000000
    01200615320900001296                                                            sap.com                                                                                +00000000000000
    01200615320900001469SAP ERP ENHANCE PACKAGE       EHP3 FOR SAP ERP 6.0          sap.com                       EHP3 FOR SAP ERP 6.0                                                    -00000000000000
    01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01                                           +00000000000000
    [SWFEATURE]                                                                               
    1                   01200615320900001296SAP ERP                       2005                          sap.com                       SAP ERP 6.0: SAP ECC Server
    19                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Discrete Ind. & Mill Products
    20                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Media
    21                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Utilities/Waste&Recycl./Telco
    23                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Leasing/Contract A/R & A/P
    24                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Retail
    25                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Global Trade
    26                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Financial Supply Chain Mgmt
    30                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Central Applications
    31                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Strategic Enterprise Mgmt
    33                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Human Capital Management
    37                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Oil & Gas
    38                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Catch Weight Management
    42                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Public Sector Accounting
    43                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Insurance
    44                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Hospital
    45                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: SAP ECC Server VPack successor
    46                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: ERecruiting
    47                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Defense & Public Security
    48                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Financial Services
    55                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Oil & Gas with Utilities
    56                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Defense
    59                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: PLM Core
    69                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: EAM config control
    9                   01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: SAP ESA ECC-SE
    ++++++++++++++++

    Though we have configured Java in solution manager the stack file that is generated does not contain any java components
    You will probably need to update Solution Manager first with a number of corrections so you can get a correctly generated stack file. Depending on your ST400 version in Solution Manager apply collective corrections from "Note 1461849 - MOpz: Collective corrections 24" or "Note 1452118 - MOpz: Collective Corrections 23". They generally deal with these kind of stack file issues.
    Nelis

  • ITunes 9.2 XML file does NOT contain any iBooks information

    I have a little script that I have that generates a webpage to list what is in my iTunes library. I noticed that the XML file does not contain ANY information about iBooks or PDFs that you import. Any idea why that is? If my main library file gets corrupt, and I have to use the XML file to rebuild, I would lose all the iBook information....
    Seems like a oversight by the iTunes people

    why did Apple even make an XML file in the first place as initially most things in iTunes (following your logic) would be purchases from the iTunes store.
    Incorrect. The existence and use of iTunes significantly predates the existence of the iTunes Store. iTunes was initially designed to get its content from CDs. The XML file was for use by other apps such as iMovie or third-party apps to have access to the iTunes library so as to be able to locate tracks and playlists for use in the app.
    Anyway, I'm not interested in arguing with you about the matter.
    Apple, plus put iBooks stuff in the XML file!
    http://www.apple.com/feedback

  • Error msg after scan "ADF does not contain any pages"

    HP office jet 6600 has worked well for months, but recently 3 out of 5 times that I tried to scan from the ADF, whether one page or many, the scanner runs through its cycle and then gives me the following error: “The scanner automatic document feeder (ADF) does not contain any pages. Insert the pages to be scanned into the ADF and try again.”
    Sometimes I just run it again and it works. I'm using HP scan that came with the 6600 download full driver package; running Windows 7 64-bit. I use the scanner significantly and it has operated perfectly for over a year and I haven't changed anything that I know of.Appreciate any help that somebody can give me… I have cleaned rulers and "flicked the little white thing", and some of the other things that were mentioned for similar problems.

    Hello  I would be happy to help you with the automatic document feeder (ADF)  issue you are having with the Officejet 6600. Even though it's a different issue this document has several steps you can try; Vertical Bands, Lines, or Streaks in Copies, Faxes, or Scans. I've copied the applicable steps here for you. Clean the scanner glass and scanner lid If the scanner glass or the white underside of the lid has fingerprints, smudges, lint, dust, or other debris, this can slow performance and affect copy and scan quality. To resolve this issue, clean the product.Before you begin, gather the following materials:Several clean, soft, lint-free clothsMild glass cleaner
     CAUTION:Use only glass cleaner to clean the scanner glass. Do not use cleaners that contain abrasives, acetone, benzene, or carbon tetrachloride. These substances can damage the product. Avoid isopropyl alcohol (rubbing alcohol) because it can leave streaks on the glass.Press the Power button () to turn off the product.Disconnect the power cord from the rear of the product.Lift the scanner lid.
    Figure : Lift the scanner lid
    Spray a clean, soft, lint-free cloth with mild glass cleaner.
     CAUTION:To protect the scanner, do not spray the glass cleaner directly on the glass.Clean the scanner glass, and the glass strip next to the scanner glass, with the lint-free cloth.
    Figure : Clean the scanner glass and the glass strip
    Clean the white underside of the scanner lid.
    Figure : The underside of the scanner lid
    Dry the scanner glass and the glass strip thoroughly with a clean, dry cloth or chamois to prevent spotting, and then dry the white underside of the scanner lid.
     NOTE:Do not use paper-based wipes or tissues that can leave fiber residue.Close the scanner lid.Reconnect the power cord to the rear of the product.If the product does not turn on by itself, press the Power button () to turn it on.Try to copy, fax, or scan again.If these steps resolved the issue, you do not need to continue troubleshooting.If the issue persists, continue to the next solution.
    Clean the automatic document feeder (ADF)
    Follow these steps to clean the automatic document feeder (ADF), and then make blank copies to check if the issue is resolved.Step one: Clean the ADF rollers and separator padFollow these steps to clean the automatic document feeder (ADF).Gather the following materials:A clean, lint-free cloth, or any cloth that will not come apart or leave fibersDistilled, filtered, or bottled water (tap water might damage the product)Remove any originals from the document feeder tray.
    Figure : Remove any originalsPress the Power button () to turn off the product.Disconnect the power cord from the rear of the product.Lift the cover of the ADF until it stops.
    Figure : Lift the ADF cover
    Locate the pick rollers and the separator pad.
    Figure : Locations of the pick rollers and the separator pad
    The ADF coverThe pick rollersThe separator padLightly dampen a clean lint-free cloth with distilled or bottled water, and then squeeze any excess liquid from the cloth.Use the damp cloth to wipe any residue off of the separator pad.
    Figure : The separator pad
    Use the damp cloth to wipe any residue off of the pick rollers.
    Figure :
    Dry the rollers and the separator pad with a clean, dry, lint-free cloth.Do not close the ADF cover. Continue to the next step to clean the glass strip in the automatic document feeder.
    Clean the glass strip in the automatic document feeder
    Follow these steps to clean the glass strip underneath the mechanism in the automatic document feeder (ADF).
     NOTE:The images in this step might not be of your product, but the steps are the same.If you have not done so already, disconnect the power cord from the rear of the product.Remove any originals from the document feeder tray.
    Figure : Remove any originals
    Open the ADF cover, and then lift the ADF mechanism.
    Figure : Lift the ADF mechanism
    Lightly dampen a clean, soft, lint-free cloth with a mild glass cleaner.Gently clean the glass strip inside the ADF, and then thoroughly dry it to prevent spotting.
    Figure : Clean the glass strip
    Lower the ADF mechanism back into place, and then close the ADF cover.Step three: Make a blank copy using the scannerFollow these steps to make a blank copy using the scanner.Lift the scanner lid.Figure : Lift the scanner lidRemove any originals from the scanner glass.Close the scanner lid.Load unused, plain white paper into the input tray.From the home screen on the product control panel, touch Copy ().Touch Start Black to start the copy.If the copy is clean, continue to the next step to make a copy using the ADF.If the copy has vertical bands, lines, or streaks, there might be dust inside the product, poor internal connections, or the product might be damaged.  Please let me know if these steps resolved your issue, or if there is anything else I can do to help.  I look forward to hearing from you!   Thanks, 

  • Selected model does not contain any target value prior

    Hi ODM experts,
    I have tried to apply the SVM alg in order to find anomalous records.The table source have rows like that:
    uniq_rec ID NAME A1 A2 A3 A4 A5 data
    577     2052956018     NAMEHDRCP8     2.27     0.4     85.46     0.01     14.54     24-JAN-13
    578     1250914484     NAMEDJDRVP3     11.45     1.24     56.24     0.01     43.77     24-JAN-13
    579     1968689283     NAMEDKEND12     0.000011     6.78     0.000029     0.01     0.091     24-JAN-13
    580     2063389130     NAMEDNMXG14     0.000011     0.65     36.65     0.02     0.091     24-JAN-13
    unq_rec is the pk, id is the id for the generic name and A1 .. A5 attributes ,data when collection occur etc
    I'm trying to execute the following code:
    drop table ALG_SET;
    exec dbms_data_mining.drop_model('SVMODEL');
    create table ALG_SET (setting_name varchar2(30), setting_value varchar2(4000));
    insert into ALG_SET values ('ALGO_NAME','ALGO_SUPPORT_VECTOR_MACHINES');
    insert into ALG_SET values ('PREP_AUTO','ON');
    commit;
    Begin
    dbms_data_mining.create_model('SVMODEL', 'CLASSIFICATION', 'ODM_PAR_FIN_HIST', 'UNQ_CRT', null, 'ALG_SET');
    end;
    The results is the following error:ORA-40104: invalid training data for model build ( if I run the code) .If I run from graphical interface I have obtained this
    error code " Selected model does not contain any target value prior"(using the similar model - SVM for anomaly detction plus the same source table )
    Please advice what is missing or wrong and if possible how to bypass this issue.
    Thanks in advance for support.
    Best Regards,
    Bogdan

    Here is also a newer example of creating a SVM Anomaly model from ODM sample code (12.1 version but this applies to 11.2):
    Rem
    Rem $Header: rdbms/demo/dmsvodem.sql /main/6 2012/04/15 16:31:56 xbarr Exp $
    Rem
    Rem dmsvodem.sql
    Rem
    Rem Copyright (c) 2004, 2012, Oracle and/or its affiliates.
    Rem All rights reserved.
    Rem
    Rem    NAME
    Rem      dmsvodem.sql - Sample program for the DBMS_DATA_MINING package.
    Rem
    Rem    DESCRIPTION
    Rem      This script creates an anomaly detection model
    Rem      for data analysis and outlier identification using the
    Rem      one-class SVM algorithm
    Rem      and data in the SH (Sales History)schema in the RDBMS.
    Rem
    Rem    NOTES
    Rem   
    Rem
    Rem    MODIFIED   (MM/DD/YY)
    Rem    amozes      01/23/12 - updates for 12c
    Rem    xbarr       01/10/12 - add prediction_details demo
    Rem    ramkrish    06/14/07 - remove commit after settings
    Rem    ramkrish    10/25/07 - replace deprecated get_model calls with catalog
    Rem                           queries
    Rem    ktaylor     07/11/05 - minor edits to comments
    Rem    jcjeon      01/18/05 - add column format
    Rem    bmilenov    10/28/04 - bmilenov_oneclass_demo
    Rem    bmilenov    10/25/04 - Remove dbms_output statements
    Rem    bmilenov    10/22/04 - Comment revision
    Rem    bmilenov    10/20/04 - Created
    Rem
    SET serveroutput ON
    SET trimspool ON 
    SET pages 10000
    SET echo ON
    --                            SAMPLE PROBLEM
    -- Given demographics about a set of customers that are known to have
    -- an affinity card, 1) find the most atypical members of this group
    -- (outlier identification), 2) discover the common demographic
    -- characteristics of the most typical customers with affinity card,
    -- and 3) compute how typical a given new/hypothetical customer is.
    -- DATA
    -- The data for this sample is composed from base tables in the SH schema
    -- (See Sample Schema Documentation) and presented through a view:
    -- mining_data_one_class_v
    -- (See dmsh.sql for view definition).
    --                            BUILD THE MODEL
    -- Cleanup old model with the same name (if any)
    BEGIN DBMS_DATA_MINING.DROP_MODEL('SVMO_SH_Clas_sample');
    EXCEPTION WHEN OTHERS THEN NULL; END;
    -- PREPARE DATA
    -- Automatic data preparation is used.
    -- SPECIFY SETTINGS
    -- Cleanup old settings table (if any)
    BEGIN
      EXECUTE IMMEDIATE 'DROP TABLE svmo_sh_sample_settings';
    EXCEPTION WHEN OTHERS THEN
      NULL;
    END;
    -- CREATE AND POPULATE A SETTINGS TABLE
    set echo off
    CREATE TABLE svmo_sh_sample_settings (
      setting_name  VARCHAR2(30),
      setting_value VARCHAR2(4000));
    set echo on
    BEGIN      
      -- Populate settings table
      -- SVM needs to be selected explicitly (default classifier: Naive Bayes)
      -- Examples of other possible overrides are:
      -- select a different rate of outliers in the data (default 0.1)
      -- (dbms_data_mining.svms_outlier_rate, ,0.05);
      -- select a kernel type (default kernel: selected by the algorithm)
      -- (dbms_data_mining.svms_kernel_function, dbms_data_mining.svms_linear);
      -- (dbms_data_mining.svms_kernel_function, dbms_data_mining.svms_gaussian);
      -- turn off active learning (enabled by default)
      -- (dbms_data_mining.svms_active_learning, dbms_data_mining.svms_al_disable);
      INSERT INTO svmo_sh_sample_settings (setting_name, setting_value) VALUES
      (dbms_data_mining.algo_name, dbms_data_mining.algo_support_vector_machines); 
      INSERT INTO svmo_sh_sample_settings (setting_name, setting_value) VALUES
      (dbms_data_mining.prep_auto, dbms_data_mining.prep_auto_on);
    END;
    -- CREATE A MODEL
    -- Build a new one-class SVM Model
    -- Note the NULL sprecification for target column name
    BEGIN
      DBMS_DATA_MINING.CREATE_MODEL(
        model_name          => 'SVMO_SH_Clas_sample',
        mining_function     => dbms_data_mining.classification,
        data_table_name     => 'mining_data_one_class_v',
        case_id_column_name => 'cust_id',
        target_column_name  => NULL,
        settings_table_name => 'svmo_sh_sample_settings');
    END;
    -- DISPLAY MODEL SETTINGS
    column setting_name format a30
    column setting_value format a30
    SELECT setting_name, setting_value
      FROM user_mining_model_settings
    WHERE model_name = 'SVMO_SH_CLAS_SAMPLE'
    ORDER BY setting_name;

  • 'Document does not contain any items' error while posting GR from BAPI

    Hello Friends,
    I am trying to post GR from BAPI 'BAPI_GOODSMVT_CREATE' but some time it post successful and some time it does not post..gives error 'Document does not contain any items'....i have search all option but did not get any solution why this error is coming....kindly help me if you have any information regarding that.
    The strange thing is i have alrady posted GR with some test data and later on again am trying to post GR with same test data but it is giving error as above.
    For your information...i am using enhancement spot in standard program for GR posting...could it give any problem.
    Regards,
    Rajkishor.

    Solved by my self...problem was i were using enhancement spot in standard program because of this it was creating problem have search new enhancement spot and put my code out there now it is working fine.
    Thanku very much all of you for your reply.

  • Migo cannot be done " PO does not contain any selectable items"

    Dear SAP Gurus
    We have a very urgent issue, while trying to do MIGO for a particular standard PO.
    Some down payments have been done to this PO already and now when we try to do the MIGO, system is giving the error "PO does not contain any selectable items"
    The accounting document which is created when the down payment is done can be seen in the purchase order History.
    Please suggest soem solution
    Thanks
    kk

    Hi Kavitha,
    Please check whether all the po item quantities are received. If any open line items are there then go to item detail po tab in that Select Confirmation Tab and Check whether the confirmation is Z001. Change it to 0001 etc and save.
    Try this, if unresolved revert back.
    Reg,
    Ashok
    Assign points if useful.

  • J1IEX post than made error like does not contain any selectable items

    Respected Sir,
    We have purchase the Goods From SEZ unit and it wil be treated as import made.
    We doing the following activities
    1. Prepared the Import P.O.
    2. released the same P.O.
    3. Doing the MIRO for Custome Vendor
    4. Capture the J1iex
    than we fins the below mention ERROR & Diagnoses and ERROR
    Document 4400000016   does not contain any selectable items
    Message no. M7064
    Diagnosis
    The document or document item entered cannot be adopted.
    Possible reasons for this are:
    u2022     The document items have already been processed
    (Suggest zero lines indicator set?).
    u2022     the document items have been deleted or are blocked.
    u2022     the document items have been created for a different plant.
    u2022     (for reservations only) movements are not yet allowed for the reservation items.
    u2022     (for reservations only) the document items are retrograde components of the order. These are posted using the order confirmations.
    u2022     A confirmation must exist for the document items.
    u2022     The document items must be released first.
    u2022     The document is an R/2 document.
    Procedure
    Make sure your entries are correct.
    u2022     If the system has already processed the total quantity, you can set the Suggest zero lines indicator. The system will suggest the quantity zero for the items that have already been processed.
    u2022     If you have entered a particular item, cancel the item. If you do not enter an item, the system searches all of the open items in the document.
    u2022     If the document is a purchase order, production order or a reservation, you can
    Kindly doneedfull above mention error
    Thanks & Regards
    Bipin Shah

    HI,
    Please check whether all the vendor and excise details have been maintained in J1id.  i.e Excise rate maintainance.
    Hope this helps.
    Regards,
    Prasanna
    Award pls if helpful

  • ITunes Artwork Screensaver "Your iTunes Library does not contain any songs

    i have been using the iTunes Artwork Screensaver on my 1.25GHz PowerPC G4, running Leopard 10.5.2 and it has worked perfectly, showing all my album artwork. i got all the album covers from amazon.com or google. i have always kept my iTunes Library on my Boot Drive and have never moved it.
    Yesterday when my computer went into screensaver mode (itunes artwork) the message "Your iTunes Library does not contain any songs with artwork"!
    This is really strange, as all the albums in my library have artwork. i have also tried deleting the iTunes Artwork Screensaver preference file.
    I know that there are many issues with the artwork screensaver, but i have not found a solution to this problem.
    I would appreciate anyones help!

    i'm glad to see that i'm not the only one with this problem. i have seriously tried everything, like deleting the preference files of the itunes screensaver, using a script to embed the artwork, repairing disc permissions but i the screensaver just won't work. the message that my library does not contain any artwork still appear every time.

Maybe you are looking for