The battery indicator in mountain lion does not show the time left!

I have updated to Mountain Lion today and i noticed that the battery indicator on the top bar only show percentage of the battery, and it don't have the option to show the time left for recharge or to the total discharge of the battery.
The only way to show the time left is to clic on the meter itself.
Any ideas?

I'm going to submit a complaint via http://www.apple.com/feedback/macosx.html.  I hope others do the same.

Similar Messages

  • DVI to Viedo adapter stoped working after upgrade to Mountain lion does not show up in displys any more

    I have a dvi to viedo adaptor that no longer shows up in the displays window, and on image shows up on the tv. How do I get the mac book to reconize the adaptor? The Mv book does respond to the adaptor beging pluged in but does not show up in the display window.
    Mike

    Hi there, You just need to update the drivers of your laptop's built-in wireless adapter..
    I assume you have got Athros AR5007 wireless adapter  
    Kashif Khan

  • TS2755 imessages on mountain lion does not show same conversations as iPhone using same iCloud account

    Just got macbook pro with Mountain Lion installed.  Have had an iphone for years and like using Messages as text client on the phone.  I have both iphone and macbook connecting to same Apple ID account, but all of the conversations I have on my iphone are not showing up on my macbook - isn't this supposed to work?

    You should check the iMessage settings on both your devices. Make sure you have identical receive addresses on both. That way you get iMessages sent to your phone number and email (if you use that) delivered to both. For example, if you have a "receive email" on yourMac and iPhone and you don't have your "receive phone number" set on your Mac, then iMessages sent to your email from another person will appear on both devices and iMessages sent to your phone number will only appear on your iPhone.

  • My MacBook running Mountain Lion does not allow me to view any videos on the Internet. The place where the video is supposed to be just shows black rectangle. Is there anything I can do to make videos on line work?

    My MacBook running Mountain Lion does not allow me to view any videos on the Internet. The place where the video is supposed to be just shows black rectangle. Is there anything I can do to make videos on line work? I discovered that Java quits immediately. Could that be the cause? If so, how do I fix it?

    My MacBook running Mountain Lion does not allow me to view any videos on the Internet. The place where the video is supposed to be just shows black rectangle. Is there anything I can do to make videos on line work? I discovered that Java quits immediately. Could that be the cause? If so, how do I fix it?

  • I just downloaded Lion on my iMac. I want to make a copy on a USB for my MacBook. Lion does not show up in my Applications. Where do I find it?

    I just downloaded Lion on my iMac. I want to make a copy on a USB for my MacBook. Lion does not show up in my Applications. Where do I find it?

    christyapplecommunity wrote:
    I just downloaded Lion on my iMac. I want to make a copy on a USB for my MacBook. Lion does not show up in my Applications. Where do I find it?
    Download it again, don't install again and the file (Lion Installer.app) will be in your applications folder.
    It is deleted after installation, that's why it can't be found.

  • IMac (Mountain Lion) does not pair with Apple Remote

    Hi,
    my iMac (2009, Mountain Lion) does pair with my remote. Otherwise the remote (or remotes, I tried two) are working fine with the iMac, it just wont pair.
    I need it to pair as I have an iMac and MPB and each having its own remote (each computer should react only to its remote, not the other computer remote)
    I googled this extensively, here is what I did so far:
    - obviously, trying the normail "pair remote" procedure as the support page says
    - checking that infrared remote pairing is enabled and no other remote is currenly paired
    - restarting Mac OS
    - removing and reinsterting battery in remote
    - making sure I am an Admin
    - disabling the remote function in Plex and killing all Plex (and EyeTV and similar) processes via Activity Monitor (thought they might somehow limite the OS control over the remote)
    - tried the same with another remote (does not pair as well)
    This is very annoying.
    Can anyone help out?
    Much appreciated

    Hi den,
    Does the remote remember which computer it is paired to? I though only the computer remebers that.
    In any case, currently there is not remote paired to any computer (both computers have clean new Mountain Lion installations). And I cannot pair any remote to any of my machines. In between, I tried with the laptop as well, and it is not pairing as well. I also tried an (old, still working) third remote... nothing is happening.
    Some apps seem to take control of the remote (e.g. pressing menu start Plex on my systems). Could that be the issue? Is there a Terminal command to give Mac OS back full control over the remote?
    Or could it be something else? 'Is there an app for that' a la ForcePair.app?
    Thank you
    p.s. this is the page that I was refering to ealier, not working for me

  • How come skype on mountain lion does not load all the time?

    Hello everyone!
    I am about to pull my hair out re: skype not loading on mountain lion (sometimes it does).
    Does anyone know why sometimes when you click the skype icon it loads, but most of the time it doesn't?
    I click it, it doesn't load, ...
    Is there something i need to clear, install, or ???
    I am running mountain lion 10.8 with skype 5-1.8.0.1027
    Please help, and thank you!!!

    Hello Allan.
    Thank you so much for posting...I am going to go insane
    What do I type in console to see the error log?
    But no, No general error messages.
    I click the skype icon, it bounces, but doesn't load up or anything. Sometimes when I shut down the computer and do a clean boot up, skype will work, but most times it doesn't

  • After upgrading to Mountain Lion does not to wake up from sleep

    I just upgraded my Mac Book Pro mid 2009 from Lion to Mountain Lion. Everything is ok, but when I try to wake up it from a sleep, white dots fill, only last one remains grey and machine stay forever.
    I really appreciate any suggestions.
    Many thanks!
    Sandro

    My suggestion is that you reinstall Mountain Lion:
    Reinstalling Mountain Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Mountain Lion: Select Reinstall Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • IMovie '11 on Mountain Lion does not see Canon Vixia HG20, Lion does

    I have 2 Canon Vixia HG20s and an HG21 that I had previously used with iMovie. When I plug the cameras into any of my Mountain Lion systems, iMovie does not see the camera to import from. On my MacBook it only sees the EyeSight camera.
    I know I had imported from these cameras when I was still running Lion. In fact, I still have one Mini running Lion Server. I installed iMovie onto it and plugged in one the HG20s. It immediately recognized it and offered to import the videos. I unplugged it and immediately moved it to the MacBook with Mountain Lion, and it's not recognized.
    The one thing I'm not sure I have tried is on another Mini that was upgraded from Lion to Mountain Lion. I will be trying that tonight.
    What can be done to allow me to import my videos, something I USED TO be able to do?
    Thanks!

    Wow. I looked at some of your other posts and found a few hints that I tried. I deleted all the com.apple.iMovieApp.plist and .cache files/folders in various locations and tried again. Now iMovie sees my camera!
    Hope you figure out your issue!

  • Installation of OS X Mountain Lion does not move on even though it says o second remaining. It has been taking at least 4 hours. Help!!!!!

    I wanted to restore my Mac before I give it out to my brother. After cleaning it, I have been trying to reinstall the OS X Mountain Lion but it does not work; it just takes forever. It is so frustrating that the installation stops when it says "about 0 seconds remaining." Help please!

    Restart while holding down the Command + R keys so you can verify and if necessary, repair the startup disk.
    Apple - Support - OS X Mountain Lion - Installation and Recovery

  • Migrating from SnowLeopard to Mountain Lion does not start

    Just got a brand new 15"MacBook Pro Retina running Mountain Lion.
    First thing I tried to do after selecting language and keyboard was to try to migrate everything from my 15" MacBookPro running Snow Leopard but the process does not even start
    After connecting both via ethernet cable, the computers recongnized each other, and I started the process but it has been showing "Preparing to transfer user documents for more than 4 hours"
    No progress bar, no expected time for completion. nothing at all
    Any suggestions on what to do?
    Thanks in advance

    Diable anti virus software.
    Turn off the Firewall in System Preferences > Security & Privacy

  • Mountain lion is not showing up as installed at the app store

    I was going to activate Find My Mac and discovered that my Recovery Partition was missing.  After seaching this forum it seemed the solution might be a clean install of 10.8.3.  When I went to the APP Store to reinstall I found that the it no longer showed that Mountain Lion was installed.  What now?

    Not true, go to the purchases tab and you will see that Mountain Lion is there if you purchased Mountain Lion through the app store. Go to the Apple in th etop left of the menu and choose about this Mac, what does it say the OS version is?

  • New macbook pro running mountain lion does not work in clamshell mode when attached to a thunderbird display.

    I have a new macbook pro retina running mountain lion. I want to use it with a thunderbolt display. When I close the lid on the macbook pro, everything goes dark.

    Plug in the power to the laptop. Then it works.

  • Download Mountain Lion does not Start

    I have a MacBook Pro 13 Änderungen Want to install Mountain Lion, but when i start the Download the Button appears in the launchpad an from Nowack on nothing happens. Any ideas?

    Diable anti virus software.
    Turn off the Firewall in System Preferences > Security & Privacy

  • Trying to download mountain lion but not impressed first time didnt load all and now trying to download again and it just freezes for days and never commits it in full can you help or is there any way to revers back to snow leopard

    I have tryed to load mountain lion several times and it just freezes for days on end is ther any way of reversing my dession back to snow leopard as i think it too muctch to dowload and when it does parts are missing and my epson scanner 3170 photo does not work as effeciant as it did i am not to pleased with it at all and think this download should be on a disk.
    Not impressed at all.
    Best Regards.
    Phil

    If you don't have a backup make one now of all your own data, you can just drag your Documents folder to another disk, assuming that is where you keep your own data. Then erase the disk with Disk Utility by booting up holding cmd-r. Choose Disk Utility > Erase tab from the screen that is presented. Then install from your SL disk.

Maybe you are looking for

  • How do i add a META tag through mobile me?

    Hello, Im trying to get my site verified on google using a meta tag. Im not very computer literate. I can understand if some one can explain it to me. I know nothing about html or how it view or edit my site in html. I have read a few post on it but

  • Pencil & Paintbrush Tools do not show line while drawing

    I am using CS4. When I use the Pencil Tool or the Paintbrush Tool, I do not get the blue dotted "preview line" I am supposed to get. Actually, with the Paintbrush Tool, isn't it supposed to show the actual brush stroke as you paint? Anyway, it's very

  • Method t create dynamic structure if the field name contains space

    HI all, I am creating a dynamic internal table. Everything id fine but when creating dynamic structure if field name contains space its giving me dump.Can you please suggest me any other methos which takes space in the field name. Iam using the follo

  • Newbie Script Help CS4

    Hello all, I'm starting to learn flash and scripting and i have run into a problem. I have made navigational buttons to flags i have established in the time line, and i have tow movie clips, one that plays before the other. So far i have a stop actio

  • Secure backup labeling tape with volume id

    I am new to OSB. I am trying to manually label a tape with a volume id using obtool. Tried this: labelvol drive raid_0n obtaropt -Xfam:SEE obtaropt -e:SEE-000005 5  force I get error: Error: Volume ID is disallowed when labeling/reusing (tag is permi