The BCB/ICI veision about CRM 2007 J2EE engine

Hi,everyone :
    I don't install the java WAS . So could anyone who installed the CRM 2007 J2EE engine tell me the BCB/ICI veision .Thanks .
    The url is like this :
http://<server>:<port>/bcb/bcbadmStart.jsp
    click 'System Information'.
Thanks very much.

Hello
Please, check [SAP Note 1268057|https://service.sap.com/sap/support/notes/1268057]
Since CRM5.0, the ICI is implemented by non-java option (ABAP). Basically, non-java option means MCM/BCB/ICI code in CRM server is on ABAP (including how to configure the connection to the simulator via transaction CRMM_BCB_ADM).
Other related application, such as CCSUI, is a java application but it has nothing to do with setting up the connection via the bcb setting when we run non-java.
So, it means, IC Web client/CRM uses the ABAP stack to implement ICI features, so you don't need to care about BCB Admin for java.
Another important feature is that as of ICI 3.02, the WSDL files are generated automatically, you don't have to generate them manually.
I hope this info helps
Joaquin

Similar Messages

Need Information about CRM 2007

Hai all..
Could u give me the information about CRM 2007? About the feature and the benefit using this new one.
Is it more difficult to configure?
Regards,
Rhesa Syahrial

Hi Rhesa,
Please click on the below link to know more about CRM 2007.
You can listen to webcasts, view ppt presentation about CRM 2007.
http://www.sap.com/community/pub/showdetail.epx?itemID=8993
Reward points if it is helpful.
Thanks.
Sindhu.

How to add a new Field to the WEB User Interface in CRM 2007

Dear experts,
I have been struggling to add a new field to the (CRM 2007) user interface from available fields for a specific view.
I have maintained settings in BS__WD_CMPWBàRuntime Repository editoràComponentàViewàConfigurationàNew ConfigurationàAvailable FieldsàField Propertiesàand save.
But the field is only appearing in display mode in the Web UI, which doesnu2019t allows any user input.
I need your help to resolve the issue, I would be grateful if you could provide step-by-step documentation with screenshots or any other kind of documentation.
Each suggestion will be appreciated.
Best regards,
Raghu ram.

Hi Raghu Ram,
I think you added a new custom field using some method like EEWB etc.,
Then, you are adding the field onto the UI using UI Configuration Tool .. right ?
These are the steps to diagnose:
Method 1.Check the field properties in the model browser first.
It should be showing 'C' i.e., CHANGEABLE. If it is showing as 'R', it is only READABLE.
In such a case you need to find a BADI to change the field properties.
For example, in Marketing Applications OBJ BADI has a method CHANGE FIELD PROPERTIES for this purpose.
Method 2. Debug and check what is the value coming for RV_DISABLED parameter in the GET_I method in BSP_WD_CMPWB. This should be FALSE.
Method 3. Check what are the field properties in the UI Configuration tool.
Make sure it is not a display only field.
Regards,
Masood Imrani S.

How to get the customer fields view in CRM 2007?

HI Experts,
There is a tab in CRM 4.0 for customer fields(Generated using EEWB).
My question is how can we get these fields into WEB UI?
I didn't find the Component BTCUSTOMER_H in CRM 2007.
What might be the reason behind it?
Please share your views.
Thanks,
Adi.

Adi,
You actually got pointed to the wrong blog that I wrote. However if you read the following blog, it will show you how to do what you want to do:
/people/stephen.johannes/blog/2008/01/25/crm-40-to-52-customerh-fields
If you want to cheat, then apply latest support stack for CRM 2007 and the fields will be there. The section 1.13.5 in the SP02 release notes explains that the nodes are now available in CRM 2007 SP02.
Look at this thread on how to view the release notes:
SAP CRM 2007 SP02: DOCUMENTATION RELEASED
If you have any further questiosn let me know.
Take care,
Stephen

Change the default work center in CRM 2007 webclient

Hi all,
With IC_AGENT role,the default work center is 'Account identification'.When I click the buttone'end' ,it jump to account identification work center ,how to change this default,config or coding ?
Thanks a lot!
Best regards,
LeKa

Hi Ashwin,
In our ZIC_AGENT, I have defined the navigation bar that contained the 'IC_BPIDENT:account identification' work center. This is as default pages whatever ending phone call on webclient or cancell any action, it also jump to 'IC_BPIDENT' view.
I want to enhance the function, when i end a call from webclient ,it could jump to 'call list' work center instead of 'account identificaton'.
did you have any ideas ,please tell me.
Thanks.
Best regards,
LeKa

BCB/ICI Version Upgrade from 3.00 to 3.02 on CRM

Dear Sir/ Ma'am,
Presently our DEV CRM J2EE engine is on BCB/ICI version 3.00.64507 and we would like to upgrade to version BCB/ICI 3.02 for Free Seating Functionality in CRM Server.
Can you please provide the information for upgrading of this ICI version 3.0 to 3.2 or any latest version. Also, appreciate, if could
proivide any SAP document/Notes or link.
An early reply would be appreciated.
Thanks!
Best Regards,
Gunveen

Hello
Please, check [SAP Note 1268057|https://service.sap.com/sap/support/notes/1268057]
Since CRM5.0, the ICI is implemented by non-java option (ABAP). Basically, non-java option means MCM/BCB/ICI code in CRM server is on ABAP (including how to configure the connection to the simulator via transaction CRMM_BCB_ADM).
Other related application, such as CCSUI, is a java application but it has nothing to do with setting up the connection via the bcb setting when we run non-java.
So, it means, IC Web client/CRM uses the ABAP stack to implement ICI features, so you don't need to care about BCB Admin for java.
Another important feature is that as of ICI 3.02, the WSDL files are generated automatically, you don't have to generate them manually.
I hope this info helps
Joaquin

How to launch IC Webclient in CRM 2007?

Hi,
Not able to launch IC Web Client using Tcode CRM_IC in CRM 2007? Any change to the IC Webclient launching transaction in CRM 2007 (6.0) ?
Appreciate your quick response.
Regards,
Venu.

Hello All,
Please note that I changed the subject line to "How to launch IC Webclient in CRM 2007?" from the original title of "How to launch IC Webclient in CRM 7.0 ?" since CRM 7.0 is not yet developed/released by SAP. CRM 2007 is the latest product on the market, so I assume this questions is about CRM 2007.
In CRM 2007, the transaction code "CRM_IC" is no longer available. The reason for this is that the IC WebClient technology is now also used by the rest of CRM! So there have been some slight changes affecting the Interaction Center. For example, the old IC Profile concept is replaced by a new CRM Business Role concept. Now when you start the CRM WebClient, you need to indicate which business role you want to log on with -- IC Manager, IC Agent, Sales Professional, Service Professional, Marketing Professional, etc.
One way to start the CRM WebClient is by adding a favorite to your SAP menu in SAP GUI by choosing BSP Application "CRM_UI_FRAME", any description you want, and then start page "default.htm". To assign yourself to a busines role (like IC_AGENT) you can either use the standard HR Org Model (PPOMA, PPOMB, etc.) like in the past. Or you can cheat and assign parameter "CRM_UI_PROFILE" with value e.g., "IC_AGENT" to your user in transaction SU01. Of course, you could also just create a browser shortcut that points to a specific CRM application server (e.g., http://[server]:[host]/sap/bc/bsp/sap/crm_ui_frame/default.htm
Warm regards,
John

CRM 2007 - CS included ?

Hi all,
Some colleague have any document about the CS funcionalities, that in CRM 2007 version, (probaly) appears inside CRM, means, CS is not more necessary because the most important funcs, are now in CRM.
Rgds

none?

CRM 2007 - CS include?

Hi all,
Some colleague have any document about the CS funcionalities, that in CRM 2007 version, (probaly) appears inside CRM, means, CS is not more necessary because the most important funcs, are now in CRM.
Rgds

none?

Vendor Number Range Conflict SAP ECC and CRM 2007

I need to load SAP ECC Vendor data from SAP to CRM and have setup most of the configuration as required. However I have an issue, the vendor number range used currently in our SAP system is already in use in our CRM system and has been for some time (for Prospects and Contacts). What is the best approach to dealing with this issue...
My initial thought was to see if we could have two different numbers for the same vendor in ECC and SAP CRM
eg SAP Vendor "50000001" equates to CRM "VEN50000001"
Is such as approach supported? Can you point me to the documentation that shows how such an approach could be implemented. What approaches have others done to address similar issues?
Thanks in advance
Eddie
By the way we are on CRM 2007 sp4

Hi Eddie,
SAP Note 1044637 - Customize Vendor Numbers
Implement the code present in the attachment. You can
change it according to your own requirements. The example code
suffixes 'VEND' before the first six digits of the vendor
number before it is downloaded to CRM.
Thanks,
Vaibhav Shah

Business Objects in CRM 2007

What are the main business objects in CRM 2007 and how does this module interact with other SAP modules?

Hi,
then you can use an application called "OpenDocument". Each document on your BusinessObjects Enterprise system can be called with OpenDocument. If you go to help.sap.com in the BusinessObjects area and look for BusinessObjects Enterprise as product you will find more details
ingo

Upgrade to CRM 2007

Hi All,
I want to know the steps to upgrade to CRM 2007 from CRM 5.0.
If you atleast give me the links where I can find the info, that is also fine.
I need to prepare a document involving the steps and mandatory information to be noted while doing the upgrade.
Thanks in advance.
Regards,
Surendra

Hi Surendra,
If it helps, you can get the Upgrade Master Guide document at:
- http://service.sap.com/instguides
-> SAP Business Suite Applications
--> SAP CRM
---> SAP CRM 2007
> CRM Product
And there you have a link to Upgrade Master Guide SAP CRM 2007.
Kind regards.

What is master data in SAP CRM 2007 in Web Client

Hi All,
plz could you explain what is the master data in SAP CRM 2007 In Web client intraction center.
regards,
pasha

Master Data are as under:
Business Partner
Product
IBase
Regards,
Rajesh Banka

Difference between SAP-CRM 2007 UI and previous version UI.

hi,
anyone knows the differences difference between SAP-CRM 2007 UI and previous version UI.
anykind of links or files are helpful.
regards.
raman.

Hi,
actually quite a late response and I think all the rather technically focuses comments have already been given, incl. the link to a really good slide deck, that explains all the technical architecture details on what exactly we did.
From an end user perspective some other statements on what we did:
(1) From an information architecture and visualization perspective we acted based on feedback from our customers in the last years, which led to some restructuring of the screen, e.g. moving the navigation bar from the top area of the screen (horizontal) to the left hand side --> sounds simple but users tend to have problem seeing thing at the top of the screen. We also decided to arrange the information for e.g. an account or an opportunity not in a tab oriented format. Again usability tests in CRM had shown that users often find it hard to see and understand that tabs contain additional information. We now show the details in assignment blocks below the header information in a scrollable format. Vertical scrolling is a behavior of a screen that most users know from their internet experience. Those are just two exampels of what we did in this area
(2) We also have put a large focus on well known web behaviors, like drag & drop and personalization in general, knowing that on the one hand side, no matter what standard UI we deliver, users tend to adapt it exactly based on their needs and wishes. So you will find really easy to understand personalization options everywhere in the new CRM Web Client UI. To achieve this we used lots of web 2.0 techologies that enable especially these easy interactive capabilitites.
(3) Finally, and this relates directly to the arguments mentioned in (2) we focused as well on really easy UI configuration. Again, in every customer project user interface changes are made, to adapt the SAP default to the customers needs. here we invested a lot to make the 60-80% most common UI changes done in projects as easy as possible, that even non-technical people can generally do it (like Power users).
Hope this clarifies some arguments what from the users point of view has been done and what the advantages are.
When you follow the same link as mentioned by Nadine above, you can also find a presentation UI Concept, which explains all the details rather from a users perspective.
Best regards and enjoy the new UI ..and every feedback is very much welcome, only with your feedback we can improve the solution even more.
Ingo

Extract data from CRM 2007 (CRM 6.0)

Hi all,
When BW-ekstraktion, g.e. 0BPARTNER_ATTR, we will get infopackage error:
8 when starting the extraction program
The problem is in SAP CRM 2007. This system has been setup as (transaction kode CRMC_REPO_OPT) "BP BI AND INTERACTIVE REPORTING" as activeted.
In Transaction kode SBIW "Control parameters for data transfer from the souce system" the field "Target system for background job" has value CRMCLNT150 (BW INTERACTIVE REPORTING client in the CRM 2007 system). This is done for getting the CRM 2007 "CRM Interactive Reporting" to work.
"Target system for background job" must be empty (Note 147104) else can't SAP BW get any data.
We need to get both "CRM Interactive Reporting" and BW data loads to work. Has any one got "luck" with data load to BI 7.0 and CRM INTERACTIVE REPORTING (CRM 2007) running at the same time ?
(OSS has been created)
best regards
René

Why do you need to copy it? The data is easily available from R/3 via RFC.
Rob

The BCB/ICI veision about CRM 2007 J2EE engine

Similar Messages

Maybe you are looking for