The below error occurs when are opening group policy management editor kindly suggest me what to do

Problem signature:
  Problem Event Name:                        APPCRASH
  Application Name:                            
mmc.exe
  Application Version:                          
6.3.9600.16384
  Application Timestamp:                     5215ef8f
  Fault Module Name:                         
jscript9.dll
  Fault Module Version:                        11.0.9600.17031
  Fault Module Timestamp:                  530882eb
  Exception Code:                                 
c0000096
  Exception Offset:                               
0000000000075a36
  OS Version:                                         
6.3.9600.2.0.0.272.7
  Locale ID:                                            
1033
  Additional Information 1:                  ec0f
  Additional Information 2:                  ec0f4898764fec44122dfe96fc36b0dc
  Additional Information 3:                  4f6d
  Additional Information 4:  4f6db505997e7dc082983dd077416716

Hi,
Would you please let me know edition information of the server where this issue occurred? Was it SBS 2011? Did
you remember which operation you had done before this issue occurred? For examples, install updates or third-party applications or any other?
On current situation, please run
sfc /scannow command to scan all protected system files and monitor the result. Please also check if all necessary Windows Updates were installed.
By the way, did you encounter any issue when open and use IE?
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

  • What is the differents between Policies and Preferences in Group policy Management Editor

    What is the differents between Policies and Preferences in Group policy Management Editor?

    Policies: If you delete a policy in GPO it deletes its registry files form the clients. Policies don't tattoo the registry. Policies Settings are permanent as long policy is in effect i.e. Desktop Backgrond. Policies are applied at Computer
    Startup, User logon and Manual and automatic refresh. Takes Precedence over Preferences.
    Preferences: Even if you delete a policy form Preferences tab the registry files will still available on the systems. Preferences tattooed the registry if you want to remove the registry entries you have to do it manually. Preferences exampl
    is i.e. mapped drive. Settings applied with preferences are not grayed out. Not available in Local GPO.
    Usefull for
    Desktop Icons/Shortcuts
    Url
    Drive Map
    File Copy, Update, delete
    Thanks

  • Unable to see Remote App and Desktop Connection in Group Policy Management Editor

    I am unable to see the Remote App and Desktop Connection in Group Policy Management Editor on my 2012 R2 DC. I am therefore not able configure the connection URL in Access RemoteApp and desktops in our Windows 8.1 client environment.
    Within the Group Policy Under User Configuration, Administrative Templates, Windows Components all I see is:-
    RD Gateway
    Remote Desktop Connection Client
    Remote Desktop Session Host
    But NOT
    Remote App and Desktop Connection
    Which I need. Is there anyway of adding this?

    > I am unable to see the Remote App and Desktop Connection in Group Policy
    > Management Editor on my 2012 R2 DC. I am therefore not able configure
    > the connection URL in Access RemoteApp and desktops in our Windows 8.1
    > client environment.
    http://gpsearch.azurewebsites.net/#8113
    Do you use a central store for ADMX? Is this central store out of date?
    (Means "still contains ADMX from W7/2008R2")
    Martin
    Mal ein
    GUTES Buch über GPOs lesen?
    NO THEY ARE NOT EVIL, if you know what you are doing:
    Good or bad GPOs?
    And if IT bothers me - coke bottle design refreshment :))

  • BDC to assign MIC -:Error occurred when checking type $ group $.

    Hi
    We have developed a BDC program to assign MIC`s in routing operations,at the end of assigning the MIC`s in the operations the system is giving the below message .
    Error occurred when checking type $ group $.  
    Please note that 100% sampling procedure is assigned in MIC`s.
    Please advise how to recfity the same .
    PS :- while creating it manually there are no errors.
    Regards
    Trishna Nambiar

    There was some problem with Sampling unit of the MICs assigned in the operations.  This caused the error. Error log was in Tasklist checklist in the Inspection plan.

  • The following error occured when searching for on-premises exchange server

    I look after a company where I installed a new DELL server last year, The server is running Windows Small Business Server 2011 which we installed. Exchange 2010 was installed as part of the Windows Small Business Server 2011 installation. At the time we
    did not configure Exchange because they use external POP accounts for email. Eventually they wanted to move over to Exchange
    When we created the user accounts using Windows SBS Console, it created a local mailbox for each user
    No problems - [email protected]
    Since late last year every time I create a new user within SBS Console, it errors creating the mailbox
    Add a user account and assign a user role
    Getting "Unexpected error occurred" when Setting up an e-mail account for user
    Looking at the error "Unexpected error occurred" & MessagingManagement "Unexpected error occured"
    The user account is created ok just no e-mail address is created for the user
    I never thought much about this at the time as we weren't using Exchange email accounts. I decided to have a look at this issue over weekend
    When I try to open Microsoft Exchange Management Console I'm getting "Initialization failed"
    The following error occurred when searching for the On-Premises Exchange server
    When I try to open Microsoft Exchange Management Shell, I get a similar error
    I've download & run EMTShooter which just identifies there is an error & gives me the same error
    I've installed & re-installed WinRM IIS Extensions
    I've checked all the settings in IIS, Default Web Site, PowerShell, Modules & Paths...
    Still cannot connect to Exchange
    I've trawled through the internet for two days checking & testing every solution but no luck
    I've checked every setting against another Windows SBS 2011 Server we've installed & works
    I cannot find a difference
    Can someone help me or point me in the right direction?
    Peter Ralphs

    Thanks for the reply Cara
    Here's the original error I was getting when opening Exchange Management Console
    Initialization failed
    The following error ocurred while searching for the on-premises Exchange server:
    [server.myd.local] Connecting to remote server failed with the following error message : The WinRM client cannot process the request. It cannot determine the content type of the HTTP response from the destination computer. The content type is absent or invalid.
    For more information, see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError $true -CurrentVersion 'Version 14.1 (Build 218.15)
    I got similar error when trying to access the Exchange Management Shell
    VERBOSE: Connecting to SERVER.myd.local
    [server.myd.local] Connecting to remote server failed with the following error message : The WinRM client cannot process the request. It cannot determine the content type of the HTTP response from the destination computer. The content type is absent or invalid.
    For more information, see the about_Remote_Troubleshooting Help topic.
        + CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [],                          
    PSRemotingTransportException
        + FullyQualifiedErrorId : PSSessionOpenFailed
    When I opened the Exchange Management Console this week, the error had changed slightly
    Initialization failed
    The following error ocurred while searching for the on-premises Exchange server:
    [server.myd.local] Connecting to remote server failed with the following error message : The WinRM client received an HTTP server error status (500), but the remote service did not include any other information about the cause of the failure. For more information,
    see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError $true -CurrentVersion 'Version 14.1 (Build 218.15)
    I could only run Exbpa from a command prompt (obviously no access from Exchange Management Console)
    This is the result of the Health Check Scan
    Organization: First Organization
    Default Global Address List Changed
    The 'msExchQueryFilter' attribute of the default Global Address List 'Default Global Address List' has been changed. Default: '(Alias -ne $null -and (ObjectClass -eq 'user' -or ObjectClass -eq 'contact' -or ObjectClass -eq 'msExchSystemMailbox' -or ObjectClass
    -eq 'msExchDynamicDistributionList' -or ObjectClass -eq 'group' -or ObjectClass - eq 'publicFolder'))'. Current: '((Alias -ne $null) -and (((ObjectClass -eq 'user') -or (ObjectClass -eq 'contact') -or (ObjectClass -eq 'msExchSystemMailbox') -or (ObjectClass
    -eq 'msExchDynamicDistributionList') -or (ObjectClass -eq 'group') -or (ObjectClass -eq 'publicFolder'))))'.
    Admin Group: Exchange Administrative Group (FYDIBOHF23SPDLT)
    The default public folder database is remote
    The default public folder database for mailbox database 'Mailbox Database' on server SERVER isn't local. Public folder database: CN=Public Folder Database 1529293969,CN=Databases,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=First
    Organization,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=myd,DC=local.
    Server: SERVER
    Disk timeout changed
    Disk timeout on server SERVER.myd.local is not set at the default of 10 seconds. This is normal if third-party storage software is installed. Current timeout value is 160 seconds.
    Client RPC binding found
    The 'Rpc_Binding_Order' is set on server SERVER.myd.local. It is possible that either the Exchange or Outlook client is installed on the server. Current registry value: ncalrpc,ncacn_ip_tcp.
    One thing I've noticed from the start is that the error occurs when it is "searching" for the Exchange Server, it then goes on to name the server [server.myd.local] it knows it's there but cannot access it ?
    Another thing I've noticed is that it always refers to the "remote server" this server is Windows SBS 2011, it's the Domain Controller, DHCP Server, DNS Server & Exchange Server all in the same box
    I also noticed that the Health Check stated that "The default public folder database is remote"
    Has this something to do with it ?
    Regards
    Peter

  • Error occured when checking type group

    Hi Gurus,
    I am getting an error during change of routing through BDC
    I want to update the MIC  against operation ,but in the last step I am getting the error
    like "Error occurred when checking type 5xxxxxxxx"
    Please suggest me why this error is coming.
    Regards
    Arabind

    Hi Arabind,
    Please check below posts. They talk about similar issue & I think they have the answer to your question.
    BDC - Error occurred when checking type $ group $. | SCN
    Error occurred in checking type group in qm
    Thanks to the original contributers.
    Regards,
    Ragahva

  • Renamed Domain - Clients Still "joined" to old domain, can't open Group Policy Management on Server

    Performed a Domain Rename as per the following instructions:
    http://www.bauer-power.net/2011/05/renaming-windows-domain-with-rendom.html#.U4OZRPmSyTM
    and then after these issues I have gone through the related technet articles starting here:
    http://technet.microsoft.com/en-us/library/cc794793(v=ws.10).aspx
    specifically the Fix Group Policy Objects and Links.
    But still I have the following issues:
    At least for group policy clients believe they are on the old domain - despite even having renamed the computers with the new domain name.
    When I perform a gpresult the output file shows as being connected to the old Domain - despite manually going into computer properties and renaming the computer with the new domain name...
    CN=Allister Wade,OU=Users,OU=Home,DC=NEWDOMAIN,DC=local
    Last time Group Policy was applied: 27/05/2014 at 5:36:31 AM
    Group Policy was applied from:      finch.newdomain.local
    Group Policy slow link threshold:   500 kbps
    Domain Name:                        OLDDOMAIN
    Domain Type:                        WindowsNT 4
    On the server I cannot open Group Policy Management on the single Domain Controller as it is looking for a DC on the old Domain:
    Even though it has listed the new domain in the root of the management console when I attempt to expand it out I am prompted:
    "The specified domain controller could not be contacted. This affects the following domain in the console.
    Domain: olddomain.local
    The error was:
    The specified domain either does not exist or could not be contacted."
    I can select to remove the domain from the console but this does nothing - as said it already shows the new domain in the console.
    Far as I am aware the clients should not even of needing renaming or changing the domain, but were having authentication issues before I did this. Not sure what I have done wrong here..?

    Client's NSLookup shows "UnKnown" as DNS Server so thought to check DNS out.
    This is result of dcdiag /test:DNS.
    Directory Server Diagnosis
    Performing initial setup:
       Trying to find home server...
       Home Server = finch
       * Identified AD Forest. 
       Done gathering initial info.
    Doing initial required tests
       Testing server: Default-First-Site-Name\FINCH
          Starting test: Connectivity
             ......................... FINCH passed test Connectivity
    Doing primary tests
       Testing server: Default-First-Site-Name\FINCH
          Starting test: DNS
             DNS Tests are running and not hung. Please wait a few minutes...
             ......................... FINCH passed test DNS
       Running partition tests on : ForestDnsZones
       Running partition tests on : DomainDnsZones
       Running partition tests on : Schema
       Running partition tests on : Configuration
       Running partition tests on : NEWDOMAIN
       Running enterprise tests on : NEWDOMAIN.local
          Starting test: DNS
             Test results for domain controllers:
                DC: finch.NEWDOMAIN.local
                Domain: NEWDOMAIN.local
                   TEST: Delegations (Del)
                      Error: DNS server: finch.olddomain.local. IP:<Unavailable>
                      [Missing glue A record]
             Summary of test results for DNS servers used by the above domain
             controllers:
                DNS server: 203.12.160.35 (<name unavailable>)
                   1 test failure on this DNS server
                   PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DNS server 203.12.160.35               
             Summary of DNS test results:
                                                Auth Basc Forw Del  Dyn  RReg Ext
                Domain: NEWDOMAIN.local
                   finch                        PASS PASS PASS FAIL PASS PASS n/a  
             ......................... NEWDOMAIN.local failed test DNS

  • Error occurs when I open the tasks list in MS Project Professional 2013 from SharePoint 2013

    Hi,
    I have created a SharePoint 2010 workflow for a tasks list that updates a list item column if the Date Complete <= Today's date & Percentage Complete = 100%
    I used 'Set Field in Current Item' in the workflow & the values are updated in the list for the current item.
    However, when I open the tasks list in MS Project Professional 2013 from SharePoint 2013, then I get a error "We can't write task - taskname to the SharePoint site. This is either because tasks list is in read only mode or because this task has a column
    that requires unique value."
    If I remove the 'Set Field in Current Item' in the workflow, then the error does not occur. However, the 'Set Field in Current Item' in the workflow is required.
    Please provide solution to this issue ASAP. Your reply will be greatly appreciated.
    Thanks in advance

    Hi Jack,
    A shot in the dark here.  I'm not convinced the error is from the workflow.  What is the definition of the list item column in SharePoint?  Have you set the column to requiring a unique vale?  Look at the column definition.

  • Strange error message when starting OHS2 after Policy Manager install

    We just installed the OAM 10.1.4.3 Policy Manager on OHS2 and when we restarted this error was posted to the logs
    /u01/app/itisora/product/OHS10.1.3/ohs/bin/apachectl startssl: execing httpd
    Syntax error on line 1322 of /u01/app/itisora/product/OHS10.1.3/ohs/conf/httpd.conf:
    API module structure `OBAccessManager' in file /u01/app/itisora/product/oam10.1.4/webcomponent/access/oblix/lib/webpluginsssl.so is garbled - perhaps this is not an Apache module
    DSO?
    We already installed and configured the WebPass on this http server. Has anyone seen this error?

    There was no transfer of files, the installer used the OHS11g policy manger install instead if the OHS2 10g install files

  • I get the following error message when I open Minefield: TypeError: Components.classes['@softage.ru/skype/SkypeFfExtension;1'] is undefined

    This only happens on Minefield, NOT on Firefox (latest release)
    == This happened ==
    Every time Firefox opened
    == 2 weeks ago ==
    == User Agent ==
    Mozilla/5.0 (Windows; Windows NT 6.1; en-US; rv:2.0b2pre) Gecko/20100705 Minefield/4.0b2pre

    Removing the Skype extension/add-on and restarting FF solves the problem.

  • I cant Find the most recent thumnails when i open a new tab and it is blank what is the solotion to this and i am running firefox beta 19 most recent update

    I restarted the computer and i started browsing then i opened my tab like i usually and found that it was blank and the "most visited" sites were gone

    hello, is there an icon on the top-right of the page that allows you to switch the thumbnails on or off?
    otherwise you can either install the [https://addons.mozilla.org/firefox/addon/searchreset/ searchreset addon] to get rid of the problem or manually reset the page that opens on each new tab: enter '''about:config''' into the firefox location bar (confirm the info message in case it shows up), search for the preference named '''browser.newtab.url''' and double-click & change its value to '''about:newtab'''.
    [[New Tab Page – show, hide and customize top sites]]

  • Group Policy Management | No such interface supported

    Running Windows Server 2008 R2 as a Domain Controller and when I open Group Policy Management, click on a GPO, then click on the Settings tab, it pops up an error message that says "No such interface supported".  I've found several articles
    that talk about registering .dll files and I've done that and nothing.  I've uninstalled GPMC and reinstalled and that didn't fix anything.  Can anyone help resolve this?

    Hi Jason,
    Before going further, do we have other domain controllers? If yes, does GPMC work correctly on these domain controller? GPMC reports the error "No Such interface supported" normally is due to a missing or corrupted Windows component.
    Besides, do we update the server to the latest? If not, we can update the server to the latest and then reinstall the GPMC to see if the issue persists.
    TechNet Subscriber Support
    If you are TechNet Subscription user and have any feedback on our support quality, please send your feedback here.
    Best regards
    Frank Shen

  • Error occuring when opening file programatically?

    I am trying to create a directory(ok) and then create a file from information obtained from a program(error). In this example i am calling the directory C:\TESTDATA\`serialnumber`\`type of test` and the file called `date``operator`.xls
    However once the directory is created, an error occurs when i open the file to write my table into?
    Can anyone help?
    Thanks
    Attachments:
    test.llb ‏77 KB

    Hi,
    Can you do two things to help us help you? First, save your vi's using the "Save with options" selection "Development distribution", as some us don't have the OpenG libraries installed, and two, give us the error code/message you are getting.
    Thanks
    P.M.
    Putnam
    Certified LabVIEW Developer
    Senior Test Engineer
    Currently using LV 6.1-LabVIEW 2012, RT8.5
    LabVIEW Champion

  • Error occured:when execute "SYNCHRONIZE ALL" on target

    (I added the "SYNCHRONIZE ALL" command on the IKM at last,the transaction must be committed)
    My target datastore is xml when ODI execute "SYNCHRONIZE ALL" on target the following error occured,
    it's wonder that I can execute with no error sometimes,
    Error Info:
    0 : null : java.sql.SQLException: Error synchronizing automatically the schema HJYEMP
    java.sql.SQLException: Error synchronizing automatically the schema HJYEMP
         at com.sunopsis.jdbc.driver.xml.SnpsXmlConnection.b(SnpsXmlConnection.java)
         at com.sunopsis.jdbc.driver.xml.br.executeUpdate(br.java)
         at com.sunopsis.sql.SnpsQuery.executeUpdate(SnpsQuery.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execStdOrders(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
         at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
         at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
         at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
         at com.sunopsis.dwg.cmd.e.i(e.java)
         at com.sunopsis.dwg.cmd.g.y(g.java)
         at com.sunopsis.dwg.cmd.e.run(e.java)
         at java.lang.Thread.run(Thread.java:595)
    Topology Configuration:
    com.sunopsis.jdbc.driver.xml.SnpsXmlDriver
    jdbc:snps:xml?f=D:\ODI\hjyemp.xml&d=D:\ODI\hjyemp.dtd&s=HJYEMP&dod=yes
    Anyone can tell me why ODI sometimes execute error and sometimes right?
    He
    tks

    Hi MS,
    We have checked the HANA DB connection with report ADBC_TEST_CONNECTION in T code SE38. We are getting the below
    Connection <connection name> Successfully opened
    Connection <connection name> closed
    Kindly advise us on this.
    Thanks
    Arun R

  • The following error occured while searching for on-premises exchange server

    I've previously posted this under the Exchange Forums - Exchange Server 2010
    I look after a company where I installed a new DELL server last year, The server is running Windows Small Business Server 2011 which we installed. Exchange 2010 was installed as part of the Windows Small Business Server 2011 installation. At the time we
    did not configure Exchange because they use external POP accounts for email. Eventually they wanted to move over to Exchange
    When we created the user accounts using Windows SBS Console, it created a local mailbox for each user
    No problems - [email protected]
    Since late last year every time I create a new user within SBS Console, it errors creating the mailbox
    Add a user account and assign a user role
    Getting "Unexpected error occurred" when Setting up an e-mail account for user
    Looking at the error "Unexpected error occurred" & MessagingManagement "Unexpected error occured"
    The user account is created ok just no e-mail address is created for the user
    I never thought much about this at the time as we weren't using Exchange email accounts. I decided to have a look at this issue over weekend
    When I try to open Microsoft Exchange Management Console I'm getting "Initialization failed"
    The following error occurred when searching for the On-Premises Exchange server
    When I try to open Microsoft Exchange Management Shell, I get a similar error
    I've download & run EMTShooter which just identifies there is an error & gives me the same error
    I've installed & re-installed WinRM IIS Extensions
    I've checked all the settings in IIS, Default Web Site, PowerShell, Modules & Paths...
    Still cannot connect to Exchange
    I've trawled through the internet for two days checking & testing every solution but no luck
    I've checked every setting against another Windows SBS 2011 Server we've installed & works
    I cannot find a difference
    Can someone help me or point me in the right direction?
    Peter Ralphs

    Thanks for the reply Larry
    I've added more detail about the error, this server is exactly how I initially installed it. This was a clean install not a migration so Exchange was a new installation. I have not applied any service packs as I did not want to confuse matters
    or compound the issue. I was wondering whether to install Server 2008 Service Pack 1 & the Exchange Service Packs. I will check the event logs & report back with what I find.
    Here's the original error I was getting when opening Exchange Management Console
    Initialization failed
    The following error ocurred while searching for the on-premises Exchange server:
    [server.myd.local] Connecting to remote server failed with the following error message : The WinRM client cannot process the request. It cannot determine the content type of the HTTP response from the destination computer. The content type is absent or invalid.
    For more information, see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError $true -CurrentVersion 'Version 14.1 (Build 218.15)
    I got similar error when trying to access the Exchange Management Shell
    VERBOSE: Connecting to SERVER.myd.local
    [server.myd.local] Connecting to remote server failed with the following error message : The WinRM client cannot process the request. It cannot determine the content type of the HTTP response from the destination computer. The content type is absent or invalid.
    For more information, see the about_Remote_Troubleshooting Help topic.
        + CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [],                          
    PSRemotingTransportException
        + FullyQualifiedErrorId : PSSessionOpenFailed
    When I opened the Exchange Management Console this week, the error had changed slightly
    Initialization failed
    The following error ocurred while searching for the on-premises Exchange server:
    [server.myd.local] Connecting to remote server failed with the following error message : The WinRM client received an HTTP server error status (500), but the remote service did not include any other information about the cause of the failure. For more information,
    see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError $true -CurrentVersion 'Version 14.1 (Build 218.15)
    I could only run Exbpa from a command prompt (obviously no access from Exchange Management Console)
    This is the result of the Health Check Scan
    Organization: First Organization
    Default Global Address List Changed
    The 'msExchQueryFilter' attribute of the default Global Address List 'Default Global Address List' has been changed. Default: '(Alias -ne $null -and (ObjectClass -eq 'user' -or ObjectClass -eq 'contact' -or ObjectClass -eq 'msExchSystemMailbox' -or ObjectClass
    -eq 'msExchDynamicDistributionList' -or ObjectClass -eq 'group' -or ObjectClass - eq 'publicFolder'))'. Current: '((Alias -ne $null) -and (((ObjectClass -eq 'user') -or (ObjectClass -eq 'contact') -or (ObjectClass -eq 'msExchSystemMailbox') -or (ObjectClass
    -eq 'msExchDynamicDistributionList') -or (ObjectClass -eq 'group') -or (ObjectClass -eq 'publicFolder'))))'.
    Admin Group: Exchange Administrative Group (FYDIBOHF23SPDLT)
    The default public folder database is remote
    The default public folder database for mailbox database 'Mailbox Database' on server SERVER isn't local. Public folder database: CN=Public Folder Database 1529293969,CN=Databases,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=First
    Organization,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=myd,DC=local.
    Server: SERVER
    Disk timeout changed
    Disk timeout on server SERVER.myd.local is not set at the default of 10 seconds. This is normal if third-party storage software is installed. Current timeout value is 160 seconds.
    Client RPC binding found
    The 'Rpc_Binding_Order' is set on server SERVER.myd.local. It is possible that either the Exchange or Outlook client is installed on the server. Current registry value: ncalrpc,ncacn_ip_tcp.
    One thing I've noticed from the start is that the error occurs when it is "searching" for the Exchange Server, it then goes on to name the server [server.myd.local] it knows it's there but cannot access it ?
    Another thing I've noticed is that it always refers to the "remote server" this server is Windows SBS 2011, it's the Domain Controller, DHCP Server, DNS Server & Exchange Server all in the same box
    I also noticed that the Health Check stated that "The default public folder database is remote"
    Has this something to do with it ?
    Regards
    Peter

Maybe you are looking for

  • Panel's Iterator Range Size issue/bug

    I have a panel that is displaying Departments. I have the attributes for that Departments VO dropped on the panel as textboxes with a navigation bar (based on the Departments VO) that allows you to navigate through the departments one by one. I also

  • ITunes dead after System Restore

    I can no longer launch iTunes, and this has nothing to do with spyware. Sequence of Events: 1) Last Thursday, I purchased a new track from itms (Iggy Pop - Candy - it's good, check it out). 2) Upon trying to play the track, I was presented with the m

  • Can't allocate 2GB in JNI?

    Hi, I've got an application that uses JNI to allocate lots of memory. I was surprised to learn that my process maxes out at about 1900 MB (I would expect to get arbitrarily close to 2048 MB on a 32-bit windows platform). I don't think it's fragmentat

  • Echoing entered field in master pages/headers

    I'm creating a form that needs to have some data entered on the first page (a patient name) which then gets echoed to all of the subsequent pages on the form in case the pages get separated. I have two master pages: one for the first page, with the c

  • Print with only script.

    I use do not to make the print button can, i print with only script. Is this possibility?? if this is possibility, please informs the method to me...