The best place to find pictures for backround scenes

The best  placeto find pictures for backround scenes

Apple hosts a bunch of mailing lists, one of which is for Quartz Composer devs. I read the list occasionally but have never really had the time to become proficient with QC.
Start here for general info about Apple's mailing lists:   http://lists.apple.com/
Then click the "Lists hosted on this site" link to see all the various lists. You'll have to subscribe to quartzcomposer-dev in order to post your questions to the list.
The list is intended for technical discussions related to development and not really for job solicitation. But the usual folks on the list seem relatively friendly for the most part so I expect if you asked nicely and took any negotiations off-line that you wouldn't receive any flak.
Steve

Similar Messages

  • Where is the best place to find Widgets?

    Obviously there are lots and lots of different widgets out there, some free, most not. Where is the best place to find a good package of them that won't cost me an arm and leg?

    Personally, I'd recommend my site, but I'm a little biased
    However, Adobe just launched a new directory that lists many of the widgets available, no matter who develops them. You can go to MuseWidgets.com to see the directory and search and find one that does what you're looking for.

  • Where is the best place to get support for iPhoto?

    Hello,
    I have an issue that is listed here, in regards to iPhoto being very very slow, this is something that started to happen a while ago and I have been all over trying to find something to resolve this issue.
    6000+ Images, it used to work fine but now it will not Quit, it just hangs. You can send some images via email then it will crash. I have tried all sorts of suggestions from various forums etc, but nothing. Clearing Cache's etc, nothing seems to help.
    Is there any place I can get help from, or should I go directly to Apple for some suggestions?

    William,
    You have come to the right place -iPhoto forum. It's the best place I know to get the help you need from knowledgeable iPhoto users.
    When you say that iPhoto runs slow and quits, that sounds like a memory problem. How much free space do you have on your boot drive? The OS needs about by 15% free and clear disk space to use as virtual memory. An iPhoto library of 6000 can put a real drain on the system.
    Apple recommends closing down other applications if you are getting sluggish response from iPhoto to free up memory.
    Working in iPhoto you can also speed things up dramatically if you close all the rolls in the library source window, except the one you want to work with.
    If you got the zoom set to give you big displays in that source window then minimize the zoom in the organize mode. I photo creates fasting loading thumbnails for browsing through your library. If the zoom is set all the way up, iPhoto has to load the full size file in the library for viewing in the source window. If it has to load all your photos full size in the source window you will get slow response and iPhoto is apt to quit on you
    Peter

  • What is the best way to organize pictures for huge library?

    Hello.
    I have lost 3 evenings of work the last week after the corruption of the iPhoto database. I lose my temper now . it was not the first time. but I’m ready to take long term action to improve the situation.
    I have now around 15.000 pics & something like 15 Go of data. That means I have to use an external drive to store them all. Each team the connection between the external HD & my iBook is lost, not often but can happen, the database is bugged. Of course I gonna have more and more pictures in the future, I took 5.000 Go of pictures back from Australia.
    My question is very general, what is the best way to handle this kind of database size?
    Okay, now I know that I should bake-up the Library6.iPhoto file. What else?
    Could I archive my rolls on CDs (well I should do it anyway) & delete the rolls from the database afterwards? What about the photo album? Is it possible to restore the pictures from the CDs to the hard drive?
    I have read that I should create several libraries. That could be a solution. Is it possible to split the current one? I could import the pictures in a new library, but in this case I will lose the comments field.
    I would really appreciate if you could send me your feedback about handling this size of library. Thanks in advance.

    Arnaud:
    There's is a way you can have your library on your boot drive and keep the "source" files on the external. It's using iPhoto in it's alias mode. There are pluses and minuses to this system. The pluses are that you can have a very large library. I have 18,000+ photos in my alias library. The iPhoto Library folder on my boot drive is only 1.7MB while the source files on my external HD take up 27G.
    The minuses are 1: if the external HD is not mounted then you can only view the thumbnail files and any full sized files that have been edited (the edited version is saved to the iPhoto Library folder). Any operation that requires moving a thumbnail or using the full sized version can't be run. 2: if you delete a photo from your library the "source" file does not get deleted. You'll have to do that via the Finder. 3: When you add new files it's best if you put them in their own folder with the other source folders and then import. If you try to put them in another folder it you'll have to import them manually instead of just dragging the entire new folder into iPhoto to create a new roll.
    I've created some Tutorials to help users convert and use this type of library. It's not for everyone but may hold some pluses for your situation.
    Do you Twango?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've written an Automator workflow application, iPhoto dB file backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
    G5 Dual Core 2GHz, 2G RAM, 250G HD; G4 Dual 1Ghz, 1.5G RAM, 80G HD,   Mac OS X (10.4.8)   QT 7.1.3, 22 LCD, 200 & 160G FW HDs, Canon S400, i850 & LIDE 50, Epson R200

  • Where is the best place to put music for itunes

    I have just downloaded Itunes
    I have a lot of music I want to add to the Itunes Program
    Where do I store the music I have in the Windows 7 there is a folder called music
    do I place all the folders into this (Music Folder)
    and then have Itunes find the music folder and add them into the program
    Is the best way to do it.
    Over time I will add more songs do I just keep placing them into the music folder and have Itunes fiund the new songs and add?
    I need your assistance
    THanks
    Mike

    iTunes will not find files, you need to add them to your library.
    launch iTunes, go preferences > advanced and verify the copy files ... when adding and keep ... organized options are checkmarked.
    next, look inside the iTunes folder for a subfolder called automatically add to iTunes. drop your music files in there. when iTunes has finished adding the files to your library, you may delete the original files.

  • Where is the best place to find iSync / Entourage HELP ?

    Can anyone pease point me to the best best place for Entourage help - I am having trouble with SyncServices from 11.2.3
    Thanks
    I have a million duplications and no way of removing them !

    You should probably start here, at the most comprehensive Entourage-related site on the web:
    http://www.entourage.mvps.org

  • Where is the Best place to find new and good iPhone Apps?

    Hey Everyone!
    I wanted to get your opinion on what are the best sites or places to find iPhone Apps.
    J.J.

    I have been looking around at a lot of app sites lately.... and although appshopper is ok, I think the BEST site is:
    http://www.FreshApps.com
    I find myself going there a couple of times a day finding the new apps! That is my 2 cents.
    Message was edited by: jjmancini

  • Where's the best place to find Quartz Composer experts? (looking for a developer)

    I'm looking for a Quartz Composer developer who is 1) interested in working with an artist and 2) can give me a quote for a specific project I am developing.

    Apple hosts a bunch of mailing lists, one of which is for Quartz Composer devs. I read the list occasionally but have never really had the time to become proficient with QC.
    Start here for general info about Apple's mailing lists:   http://lists.apple.com/
    Then click the "Lists hosted on this site" link to see all the various lists. You'll have to subscribe to quartzcomposer-dev in order to post your questions to the list.
    The list is intended for technical discussions related to development and not really for job solicitation. But the usual folks on the list seem relatively friendly for the most part so I expect if you asked nicely and took any negotiations off-line that you wouldn't receive any flak.
    Steve

  • One of the Best places to Find Extended help for you Droid Maxx

    I Went to the Motorola's Help page and found whale full of stuff for all kinds of Issues and just plain help on learning the ins & outs on my Droid Maxx  b33
    http://goo.gl/3mmC7O
    Duplicate content - please see:
    https://community.verizonwireless.com/message/1052367#1052367
    Message was edited by: Admin Moderator

    Interesting post, I enjoyed it.
    However, keep in mind, Arch is not Fedora. It is not Red-Hat-esque, not newbie-friendly, nor will it ever aim to be so.
    http://wiki.archlinux.org/index.php/The_Arch_Way
    The way Arch does things is different in that it strives to use the most elegant and simple methodology. Note that simple does not mean "user-friendly", it means just that, simple. System configuration is left entirely up to the user. There are no GUI configuration tools; system resource controls are handled through configuration files and from the command line. This is unlikely to change.
    What you may see as unfinished or raw, is actually the way Arch devs and users prefer the system to be, so your assumption that Arch has not reached version 1.0 is not quite accurate in this sense.
    "It is what you make it." In other words, you build it, but it won't hold your hand along the way.
    Take advantage of the excellent documentation in the wiki (especially the beginner's guide) and the community. When you adopt the Arch way of doing things, I am sure your C+ rating will go up, as you will have gained the knowledge of how truly elegant and powerful Arch can be.
    Welcome to Arch!

  • Where is the best place to find Mac G3 B & W monitor help?

    I have a G3/350 rev. 2 Motherboard running OS 9.2.2 and an Apple 17" studio CRT monitor
    The machine is working fine except I have been through 3 CRT monitors over the past year. I could use some reliable guidance as I attempt to troubleshoot this issue.

    In addition to the total number of hours of previous usage, the internal components of CRT displays can age, even when they sit unused for long periods of time.  The ambient temperature range of the location where stored can hasten this process.  Your (3) CRT displays sound as if they fell victim to flyback transformer failure, which typically occurs when the insulation on the windings degrades and allows arcing to occur.  As for the surge protector, if there were a reasonably strong voltage spike on the electrical lines to your home that the surge protector had to absorb, any further protection capability would have been zapped.  With no LED lit to indicate protection, a damaged surge protector may continue to function as a power strip.  If a voltage spike had damaged your displays, I think it would also be likely that other connected devices would have been affected, like the computer.  If the power cord had an internal open-circuit defect, the display wouldn't function at all.  If the cord had an internal short-circuit, it would trip the circuit breaker on the surge protector (if it has one) or in the panel in your home. Good quality surge protectors protect each receptacle on the strip, so it's preferable to connect the computer, display, and peripherals individually to it. That's why I'd never use the adjacent power connection on the computer's power supply for the display.
    "I picked up another studio monitor from a friend to try. It has rarely been used and is in mint condition..works perfectly on her G3/350 B&W. I have reservations about hooking it up to my machine before I am sure I won't  hose this one as well."
    Unless this is a long-term loan, I don't know what you'd be able to determine by temporarily connecting your friend's display, since you got at least (3) months of service life out of the other 17" Studio Display. If I were going to loan an older Studio display in mint condition/perfect working order to someone who had experienced your problem, I'd accept the possibility that my display might also become damaged.  With that in mind, I suppose that your friend would be understanding, if her display met the same fate as your others.
    If you decide you'd like to purchase a new, widescreen display, I think I'd change my previously-written suggestion for a graphics card upgrade, to finding a slightly newer/used G4 with an AGP graphics card slot. This would broaden the selection of compatible upgrade graphics cards, if one were needed to support the 16:9 aspect ratio of the new display.  At some point, spending $$ on a 12 year-old B&W G3 isn't a good investment, when the same amount of money could provide the benefits of updated technology.

  • What is the best place to find a Mac developer online?

    I'm a private individual in need of a Cocoa developer to complete a small, specialized project. I can afford to pay the going rate.
    Thanks.
    -Shan

    There are certainly lots of good developers in this forum. The terms of use explicitly prohibit advertising goods or services, but I don't see anything about seeking services. Could be wrong about that and expect to draw fire almost immediately if so. I don't think a link to your website or other personal contact info belongs in a message but would be ok in your Public Profile.
    If it turns out your notice isn't welcome in this forum, I would suggest one of the many other OS/X developer forums on the web. Just take the time to read some of the threads to assess the level and quality of the advice that's given. Atm I don't know of any boards exclusively devoted to OS/X developer employment, but there must be some, so Google for those too.
    Btw, your previous threads got my attention, since Universal Access technology is one of my interest areas (not too long ago I was tasked with making a suite of Windows business apps compatible with JAWS, and learned about some of amazing software available at that time). However the interface you described was beyond anything I'm competent to do on the Mac, so all I could do was hope for your success. I'm especially interested in the research going on into ways to operate a computer directly from brain activity sensors and I'm sure that's going to be the future of the kind of work you want to do.
    I wish you every possible success!!

  • HT204266 Hi, what is the best way to find Apps for certain projects i need? i am looking for an App that hold files for projects that i look after?

    I am looking for a App that i can store projetcs in, and use on site when i need to show a client! i need it to show notes pdf drawings ect? how do i search this?
    Thanks
    Mike

    I am looking for a App that i can store projetcs in, and use on site when i need to show a client! i need it to show notes pdf drawings ect? how do i search this?
    Thanks
    Mike

  • Best place to find more plugins??

    hi everyone
    Where is the best place to find more plugins to add to those already with Logic?
    The effects with logic are very good but id like to add to those now.
    Is there a big range of plugins like the vst's for cubase?
    Thanks
    Andy

    Hey Andy,
    There is just as large a collection of plugins for Logic (these come in the AU or Audio Units format) as for Cubase. Anywhere you can buy recording equipment should be selling plugins too. Some free plugins (but not very useful most of the time) can be found on places like www.digitalfishphones.com or www.airwindows.com . The guy that owns AirWindows seems to basically do code copies of plugins. He's got some great free plugins. . . one of which I often use on vocals. he also has some paid plugins that are far cheaper than the competition ($60 vs. $500 for a tape emulation plugin for instance) that are VERY good.
    If you're looking to buy plugins, go to www.sweetwater.com . . . or really any large pro audio retailer, but sweetwater's a good place to start. If I knew more of what you were looking for I could help guide you a bit better.
    Also, if you have an ilok key you can download demos of many paid plugins and give them a test drive.

  • What is the best place to store salts

    Hi,
    I'm using a combination of flex ,CF and MS SQL
    Where is the best place to store salts for user passwords?

    Hi,
    Table is good if "constant" might change so you can create APEX form to maintain those.
    You could also use package specification just for constants e.g.
    CREATE OR REPLACE
    PACKAGE MY_GLOBALS
    AS
      g_const_1 CONSTANT DATE := TRUNC(SYSDATE) + 365;
      g_const _2 CONSTANT VARCHAR2(30) := 'somestring';
    END;
    Then you can refer those in procedures, functions and APEX processes like (package_name.constant_name) MY_GLOBALS.g_const_1.
    Regards,
    Jari

  • Where is the best place for suggestiong requesting features?

    Where is the best place for suggesting/requesting features?
    If something like this already exists, please let me know.
    I often wish when I select a word to right click and choose dictionary to to find out the meaning of the word. Currently I have to copy, go to a dictionary web page, paste and search. And I spent a lot of time for that. I'm not that technically oriented to suggest how this can be achieved but just as an idea, may be Mozilla can partner with dictionary web sites by making a plug ins or include a dictionary with Firefox itself

    I am sure there are Extensions that do this.
    DictionarySearch - https://addons.mozilla.org/en-US/firefox/addon/68/
    Add-on search for Dictionary - https://addons.mozilla.org/en-US/firefox/search/?q=dictionary&cat=all&lver=any&pid=1&sort=&pp=20&lup=&advanced=
    Feedback - http://hendrix.mozilla.org/

Maybe you are looking for

  • How to re-order pages in Pages 5.0.1?

    I just upgraded to Pages 5.0.1 but am not pleased. The simplicity of re-ordering pages within a document or copy-pasting pages between documents is gone, or so it seems. Can anybody give me directions how to tackle this? Otherwise I'll have to downgr

  • Ambiguous error messages ??

    Hi, I'm having a problem trying to implement a progressMonitor for my application, and have used the classes provided in the Java Tutorial, i'm getting the following error messages: "Visual.java": Error #: 304 : reference to Timer is ambiguous; both

  • Deactivate ps elements 9

    how do i deactivate my ps elements 9 from my pc and to activated on a new desk top computer? thankyou

  • Field labels left-justified

    Hello, What is the easiest way to make all field labels left-justified instead of right-justified? I want to change this only for a certain business role, but for all views if possible. Thanks in advance Roland

  • Help needed with Audigy Value! Please he

    I just bought the sound blaster audigy value sound card so after disabling the onboard sound, i installed the card and the softwares and drivers. What happened was that the speakers were only making sounds from the woofer and the front center speaker