The best Quality for HTPC

Hello from Spain:
I am looking for the best MSI card to reproduce DVD. Is very important for me the quality 2D and the quality TV Out. For example: is better the RX9800 pro or the fx5900xt?
thanks for your advice, and sorry for my english!
AMD xp 2800@3000
Gygabite GA 7n400pro2
Two SATA seagate barracuda 80 G
1 Gig Twinmos memory
Antec Truepower 480

You'll get an extensive comparison of the AAC and MP3 formats and bit rates benchmarked against CD format at this link: Planet of Sound - Quality of AAC audio and MP3

Similar Messages

The best quality for ripping a song

hi,
i have some old cds that i would like to rip and upload to my ipod touch.
but what's the rate for ripping songs from cds that would give me the best quality of the songs.
thanks.
ps. now i use 192 bps, but sound quality doesn't seem too good.

You'll get an extensive comparison of the AAC and MP3 formats and bit rates benchmarked against CD format at this link: Planet of Sound - Quality of AAC audio and MP3

To get the best Quality for YouTube?

Hi there.
I have a question.
Which settings do I have to have in the media encoder in pro cs3, to get the best quality in a YouTube video?

I found this discussion from almost a year ago:
Drogba, "My YouTube video looks blurry using Adobe Media Encoder" #, 20 Oct 2007 10:32 am
...but the suggestions discussed there didn't help me, so I'm hoping someone reading this thread has other ideas. YouTube's PixelDestroyer® and VideoFracker® technology does an effective job of making my good footage look like it was shot through a thin film of mashed potatoes.
The H.264 codec seems to have ruination as its primary purpose. And the iPod and flv settings aren't much better. Heck, even if I export to mpeg (either keeping the native 720 x 480 resolution or shrinking to 320 x 240) my produced mpegs look great -- but once YouTube gets hold of them, they look like
dreck.
Sure, Vimeo or WhateverOtherTube service may have better quality, but when someone wants to search for a video, there's only one site that anyone thinks of going to. That's why Google bought them.

Need serious help about understanding settings on photoshop for the best quality- please reply is you know a lot about this.

Ideally I'd like to speak to someone from the UK as I feel I can't write out everything I want to say because it's too confusing and it isn't just one question.
I need help with setting photoshop so the images are the best quality on screen and for websites and printing and how I can change that etc I've heard different things and I just need some clarification and advice.
Obviously I'm sure some of you wont want to give personal details out that's fine but I'm generally just in need of some advice, let me know if you can help:)

I don't change any settings. For 1X web images I always use Save for Web. PS remembers which web settings you used the last time. This doesn't effect other files or formats.
Image optimization — Web Fundamentals
Improving Images for Hi-Res Retina Displays
A guide for creating a better retina web - Ivo Mynttinen / User Interface Designer
Serving Hi-Res images only to High Density Displays with PHP
Retina Images
Seriously, you can drive yourself crazy with all this Retina display stuff. I don't see much upside to it except for very special situations.
Nancy O.

I recently purchased a MacBook Pro with Retina. Which adapter do I purchase to connect it to a Samsung TV for the best quality?

I recently purchased a MacBook Pro with Retina. Which adapter do I purchase to connect it to a Samsung TV for the best quality? Thanks.

Doesn't matter. All HDMI cables should work, some are considered better than others, I had a $5 ebay cable work just as good as a $20 monster HDMI cable.

What's the best quality export for a 720 X 480 size, 24fps mp4 file?

Whats the best quality export for a 720 X 480 size, 24fps mp4 file?
This movie trailer will be sent to a distributer overseas.
The export I been resorting to lately is MPEG 2 DV High Quality as oppose to anything HDTV because it just shrinks the picture, obviously lol
Do I have anymore options besides Mpeg 2: NTSC DV High Quality?

Lagarith is a codec that you install separately. A very brief Search would have given you that info.
You can access the Lagarith option (once installed) using the Microsoft AVI format, and selecting Lagarith under Video Codec in the Video tab.

Why is the finished DVD so low quality despite having chosen best quality for Pal. Compared to Pro Show Gold its rubbish !

I am VERY disapointed with the quality of a finished DVD. As a proffesional weddig photographer the program quality is just not proffesional in quality. Compared to Pro Show Gold by Photodex which unfortunately is not available in MAC format. Can anyone offer advice and proove me wrong for deciding on MAC over PC !
I have chosen the best quality and burnt using Toast 11

Hi Nigel.
nigelfromlewes wrote:
What can I add other than I followed the instruction to the letter and have purchased a suggested
Application Toast11 .
You can add plenty (and probably remove a bit as well ). As you recompose your question(s), keep in mind:
the respondents on this site are just users helping other users. Apple sponsors the site (for its own ends) but does not participate in any of the discussions or provide any compensation of any kind to any participants.
whining and threatening (typically: "Lightroom is looking better and better", but your "proove me wrong for deciding on MAC over PC !" is up there) lower your chance of receiving helpful advice.
no one here knows what you are trying to do, what you have done, what the result was, how that differed from what you expected, or anything about your current software and hardware set-up other than what you tell us. Being pointed and specific is a very good way to help us help you.
What were you trying to do?
What specific steps did you take to achieve it?
How did the result differ from what you expected?
What steps have you taken to achieve a different outcome?
Did that work?
What hardware and software are you using?

NEED THE BEST QUALITY QUICKTIME MOVIE FOR DVD! THANKS FOR ANY ADVICE.

I just finished a three minute piece that will be shown on DVD and projected to a sixteen foot screen. I usually just output a self-contained quicktime movie with current settings and then compress with bitvice. While I'm happy with those results, because of the size of this screening, I'm curious whether there might be better options for output to quicktime, such as uncompressed, etc?
I've also heard that I could output as a Jpeg, or a PNG file, but I'd love some advice on what works best and the workflow, as I need to get this done fast and can't really afford the time to experiment.
Any advice would be HUGELY appreciated. THANKS1

I usually just output a self-contained quicktime movie with current settings and then compress with bitvice.
That will provide the best quality ... the quality won't improve over what you had in FCP. Depending on your source media type(s), you may have had a better quality export IF you had edited and rendered with another setting.
-DH

What is the best workflow procedure for importing DV SP 16x9 footage into FCP7 and then exporting the best quality 16x9 to standard DVD so that it looks great (or at least good) on a 50" Samsung LCD TV ?????? Please help! anybody?? Thanks!

We are using a Sony HDV-Z7U camera for acquisition. We recently recorded an event using the camera's non HD capabilities. We set the camera to record "DV SP" 16x9 settings on both Mini-DV tape and CF card.
To import the DV SP footage into FCP7 we chose the "DV NTSC anamorphic" setting in the log and transfer settings window. After a successful transfer from the CF card (the CF card held approximately 83 minutes) we checked the size of the file and found it to be 16 Gigs! Why so big? An 83 miniDV tape shot in SD should easily fit on a standard 4.7 gig MPEG2 DVD.
We need to burn DVDs of this show - we sent it to compressor and got horrible quality.
What is the best setting to use in FCP7's log and transfer settings window to import DV SP 16x9 standard def. footage and what is the best method for exporting for outputting this footage to DVD that preserves the original quality of the DV SP footage?? Anyone? Many thanks

> Why so big? An 83 miniDV tape shot in SD should easily fit on a standard 4.7 gig MPEG2 DVD.
No it doesn't. DV is 13GB per hour.
In any case, a Video DVD uses the MPEG 2 codec, not DV.
>What is the best setting to use in FCP7's log and transfer settings window to import DV SP 16x9 standard def.
DV NTSC anamorphic.
>what is the best method for exporting for outputting this footage to DVD...
Use the Compressor DVD preset "Best Quality 90 mins".
>...that preserves the original quality of the DV SP footage?
Not going to happen, you are compressing by a factor of 1:4. Shooting as HDV would have given you better quality material to start with. DV is at the bottom end of the scale.

Exporting the film in best quality for further editing

I am about to finish a 52-minute long documentary in Final Cu Express. I've been editing in HD, using Apple Intermediate Codec1080i50.
Part of the project files and render files are in an external G-Raid and other part are on my Macbook pro hard drive, Since I will be traveling, I would like to be careful and minimize the risk of something happening either to the G-Raid or to my Mac, therefore, I want to export the film as it is, although in the future I still might need to work on it - do some more final editing and definitely do the subtitles in DVD Pro (currently I don't have the DVD Pro). My question is whether I should be using export - quick time movie or quick time conversion - and what the settings would be for the best quality product that could be used in documentary film screenings and possibly shown on TV? Or how should I go about saving the project? Right now the project file only has references to the files, right, not the files themselves and if something happens I might lose it all...
Thanks for the help!

QuickTime Movie. Forget the render filed, they seldom reconnect properly; it's usually better just to re-render. Keep your G-RAID and make sure it is backed up together with your project.

What's the best setting for a best shades quality?

Hi!
I would like to know what are the best codec and the best setting for a video with 1920x1080 of resolution.
I've tried them all but nothing because the shades...are not shades.
I want a video that is like a uncompressed video but lighter. Same quality, same shades.
I've tried with Canopus Lossless but the video is darker and huge (7 min for >17 gb),
then with Canopus HQ, same quality but a little bit lighter (6 gb),
I've tried with all of codecs and settings but I haven't found what I want.
Who can help me for the best settings for the best shades?
Thanks so much.
P.S: Sorry for my english!

I used the PNG codec but the video is too big.
New Question: I've tried to encode the video with Canopus HQ but to 720p and now the video is more lighter, I wanted to upload it on YouTube but is not compatible with the standards.
If I encode this video by changeing the codec to Microsoft Avi uncompressed, can I have the same quality and the same weight?

Suggestions about the best tool for quality check for an ADF application

Hi All,
I need a few suggestions about the best tool for quality check in our ADF applicaiton.
ours is a small size WebCenter Portal application which neither uses any task flows nor consumes any portlets.
It has many jspx pages that use ADF components like table etc, consume web services using web service clients, and has some java classes.
We have come across below option to implement the code quality tools.
1. Jdeveloper inbuilt Staus option in View tab
2. PMD extension for Jdeveloper
3. Red Samurai
Few more suggestions or best practices would be really helpful.
Thanks,
Usha

Some general ADF / Webcenter coding standards -
http://umeshagarwal24.blogspot.com/2012/06/adf-coding-standards-check-points.html
You can use JAudit as well as mentioned in the blog.

I'm going to save my old Hi8 tapes on a hard disk using final cut pro x, to save it for the future. But how shall I export it, and in what will be the best quality to save it in?

I'm going to save my old Hi8 tapes on a hard disk using final cut pro x, to save it for the future. But how shall I export it, and in what will be the best quality to save it in?

Hi Carsten...good luck with your project.. I had just about as many Video8 & Hi8 tapes as
you that I digitized and eventually brought into FCPX..took me many months not weeks
to do so,BTW, as each tape was 60-90 minutes in lenght...and many hundreds of
gigab ytes of storage ( uncompressed AVI files)..it's tedious work unless you plan to farm
it out to a processing house...also regarding eventual storage format...remember
Hi8 is 400 lines or about 540X480 in todays resoultion metrics..you can't make hi-def out
of source that starts out as 400 lines...in my case I rewrapped the avi files into .mov
containers and imported the mov files into FCPX where I got rid of the hundreds of
minutes of Colorado mountain landscapes to get to that one minute shot of the kids
on horseback ( late 80's for most of my archives)..so its a job..scouring thru 30X90 min
of source to not miss those precious memories takes diligence and hard work but its worth
it; eventually I encode the uncompressed video I want to save in H.264 format Staandard
Def not HiDef

Exporting for the best quality

I am making a highlight tape of my children with some music. What is the best way to export the sequence for DVD with the best quality? DO I export it using the "Quicktime" option and make it a "Self contained movie" or do I uncheck this box? (There is no chapter markers in my film).
Thanks

You should export as QuickTime Movie. Don't use QuickTime Conversion.
Also, if FCE and iDVD are on the same computer, you don't have to make a Self-Contained movie. Uncheck the box and your export will go much faster, with no loss of quality.
In iDVD Preferences, check the box for "Best Quality"

I've imported a giant cd collection for my work in wav format for the best quality audio using iTunes version 11.1.1. I need to transfer this library to our Music workstation using iTunes 11.0.1. That workstation version of iTunes can't be upgraded for

I've imported a giant cd collection for my boss in wav format for the best quality audio using iTunes version 11.1.1. I need to transfer this library to our Music workstation using iTunes 11.0.1. That workstation version of iTunes can't be upgraded for compatability reasons with other software using iTunes. When I try to transfer the library I lose all of the CD metadata and end up with only track names. Is there a way to transfer everything along with the metadata?

Not easily. WAV format does not store tag information in the file. Realize both AIFF (equivalent to WAV) and Apple Lossless (full quality but smaller files) do, so WAV was unfortunately the worst format to chose.
If you have to go with what you have you will have to explore exporting the library as .xml, moving it and the files to the other computer, then rebuilding a lower version library with the two sets. I am not sure if you can do it with the library.xml file that already exists or if it too differs according to version. You may end up having to export the files as a playlist. You will, of course, lose artwork too, though you can try fetching it from the iTunes Store later.
Some of what you need to do is outlined in these articles though you have the added limitation that you are not building a library of the same version. (It really is a piity you choose WAV, otherwise you could have simply added the ripped files and most of the data would have traveled with them.)
https://discussions.apple.com/message/20401436 - turingtest2 11/2012 post on rebuilding empty/corrupt library after upgrade/crash from previous iTunes library file.
iTunes: How to re-create your iTunes library and playlists - http://support.apple.com/kb/ht1451

The best Quality for HTPC

Similar Messages

Maybe you are looking for