The best way for creating Knowledge Management
Hi
I'm kind of new with Oracle portal, and I want to create some nevigator tree (kind of the menu appereance), each submenu is a topic which shows the realated text - troubleshooting about this topic
I was looking and read the tutorials and I could find how to do it.
I really appriciate if you can help me
Thanks
Hi,
I have tried something similar, but in HTML. I has to create a HTML Knowledge Management Intranet with a Navigator tree on the left frame that listed the topics - the user would click on the topic & would be shown a problem & the troubleshooting steps in the frame on the right. We decided to use HTML so that any of the Support Staff could update / maintain it at a later stage with minimum effort & training.
You could try to use some kind of a JavaScript tree - the best I have seen is this :-
http://www.softcomplex.com/products/tigra_tree_menu/
I haven't checked it out on Portal - but, ultimately everything gets translated to HTML & I am sure it would work.
Good Luck,
Sandeep
Similar Messages
-
My Mum( a pensioner) is wanting to purchase both an iPhone and iPad. What is the best way for her to manage her data /calls/txt etc. obviously the cost needs to be as low as possible. Currently does not have WiFi but uses dongle
My Mum( a pensioner) is wanting to purchase both an iPhone and iPad. What is the best way for her to manage her data /calls/txt etc. obviously the cost needs to be as low as possible. Currently does not have WiFi but uses dongle
-
Which is the best way for creating video placeholders in AE?
I should create some video placeholder for AE animation, but I am not sure which is the best approach to do that.
I found some tutorials on the web where is explained how to create basic placeholders in AE, but I want to do something better.
Could I create some placeholder even in Photoshop? And after that to import this psd files into AE.
I saw some intersting placeholders on Videohive but I don't know how to create something similar?
Any help?
Regards!Any layer may be replaced with new footage by simply selecting the layer you want to replace in the composition, then selecting the new footage in the project panel, then holding down the Alt/Option key and dragging the new footage to the composition.
If you want to automate the process of replacing footage you'll have to use a script.
If you want to use a project as a template then simply copy the template file in it's folder and paste it into a folder that contains the same structure as the template. IOW, the folders should look like this:
Template Project
>template.aep
>Footage
New project
>copiedtemplate.aep
>Footage
Your footage has to have the same filename as the original template project.
You can also save an AE project as a template (aet) project. That's what they are doing on siges like Video Hive. The template isn't easily overwritten so it maintains the work. Then you simply add your footage using the first technique that I talked about. -
Which is the best way to create a connection object
hi,
Eventhough i am not new to java I just wanted to know that which is the best way for creating sql connection object.
Is it using the DriverManager.getConnection(..,..,..) or using a datasource and getting the connection.
Which is more efficient or Is there any other way to create sql connection which is even more better.
thanks in advance.
pradeepbhargavAFAIK all connections, DataSource ones included are created by calling the DriverManager. A DataSource is a factory for Connection objects (from JavaDocs)
If you're talking about managing connections then it depends on the application. A DataSource is great for apps that can support many clients or are multi-threaded, but may require a JNDI implementation to get to it.
If however you have an single threaded app that hits the database in a serial fashion, then DataSource is probably an overkill.
Dave -
What is the best way to create a SSRS 2005 Line Chart Report for a 12 month period?
I'm looking for advice on how to create a SQL Server 2005 query and line chart report for SSRS 2005.
I need to display the peak number of patients assigned to a medical practice each month for a 12 month period based on the end-user selecting a
single month and year.
I've previously created a report that displays all patients assigned to the practice for any single month but I’m looking for advice on how to
how to produce a resultset that shows the peak number of patients each month for a 12 month period. I thought about creating a query that returns the peak count for each month (based on my previously created report which displays all patients assigned to the
practice for any single month) and then use a UNION statement to join all 12 months but I'm sure that isn't the most efficient way to do this. The other challenge with this approach (twelve resultsets combined via a UNION) is that the end-user needs to be
able to select any month and year for the parameter and the report needs to display the 12 month period based on the month selected (the month selected would be the last month of the 12 month period).
For the report I’ve previously created that displays all patients assigned to the practice for any single month, the WHERE statement filters the
resultset on two fields:
Start Date - The date the patient was assigned to the practice. This field is never null or blank.
End Date - The date the patient left the practice. This field can be null or blank as active patients assigned to the practice do not have an End Date. When the patient
leaves the practice, the date the patient left is populated in this field.
Using these two fields I can return all patients assigned to the practice during Nov 2012 by looking for patients that meet the following criteria:
start date prior to 11/30/2012 (using the last day of the month selected ensures patients added mid-month would be included)
AND
end date is null or blank (indicates the patient is active) OR the end date is between 11/1/2012 -11/30/2012 (returns patients that leave during the month
selected)
Regarding the query I need to create for the report that displays the peak count each month for 12 months, I'm looking for advice on
how to count patients for each month the patient is assigned to the practice if the patient has been assigned for several months (which applies to most patients). Examples are:
John Doe has a start date of 6/01/2012 and an End Date of 10/07/2012
Sally Doe has a start date of 8/4/2012 and no End Date (the patient is still active)
Jimmy Doe has a start of 7/3/2012 and an End Date of 9/2/2012
Given these examples how would I include John Doe in the peak monthly count each month for May - October, Sally Doe in the peak monthly count for
August - December and Jimmy Doe in the peak monthly count for July – Sept if the end-user running the report selected December 2012 as the parameter?
Given the example above and the fact I'm creating a line chart I think the best way to create this report would be a resultset that looks like
this:
Patient Name
Months Assigned
John Doe
June 2012
John Doe
July012
John Doe
Aug 2012
John Doe
Sept 2012
John Doe
Oct 2012
Sally Doe
Aug 2012
Sally Doe
Sept 2012
Sally Doe
Oct 2012
Sally Doe
Nov 2012
Sally Doe
Dec 2012
Jimmy Doe
July 2012
Jimmy Doe
Aug 2012
Jimmy Doe
Sept 2012
From the resultset above I could create another resultset that would count\group on month and year to return the peak count for each month:
June 2012 - 1
July 2012 – 2
Aug 2012 - 3
Sept 2012 - 3
Oct 2012 - 2
Nov 2012 - 1
Dec 2012 - 1
The resultset that displays the peak count for each month would be used to create the line chart (month would be the X axis and the count would
be the y axis).
Does this sound like the best approach?
If so, any advice on how to create the resultset that lists each patient and each month they were assigned to the practice would be greatly appreciated.
I do not have permissions to create SPs or Functions within the database but I can create temp tables.
I know how to create the peak monthly count query (derived from the query that lists each patient and month assigned) as well as the line chart.
Any advice or help is greatly appreciated.Thanks for the replies. I reviewed them shortly after they were submitted but I'm also working on other projects at the same time (hence the delayed reply).
Building a time table and doing a cross join to my original resultset gave me the desired resultset of the months assigned between dates. What I can't figure out now is how to filter months I don't want.
Doing a cross join between my original resultset that had two dates:
08/27/2010
10/24/2011
and a calendar table that has 24 rows (each month for a two year period)
my new resultset looks like this:
I need to filter the rows in yellow as the months assigned for stage 3 that started on 8/27/2010 should stop when the patient was assigned to stage 4 on 10/24/2011.
You'll notice that Jan - Sept 2011 isn't listed for Stage 4 assigned on 10/24/2011 as I included a filter in the WHERE clause that states
the Months Assigned value must be greater than or equal to the date assigned value.
Any advice would be appreciated. -
What is the best way to create shared variable for multiple Real time (PXI) to GUI PC? I have 16 Nos of PXI system in network and 1 nos of GUI PC. I want to send command to all the PXI system with using single variable from GUI PC(Like Start Data acquisition, Stop data Acquisition) and I also want data from each PXI system to GUI PC display purpose. Can anybody suggest me best performance system configuration. Where to create variable?(Host PC or at individual PXI system).
Dear Ravens,
I want to control real-time application from host(Command from GUI PC to PXI).Host PC should have access to all 16 sets PXI's variable. During communication failure with PXI, Host will stop data display for particular station.
Ravens Fan wrote:
Either. For the best performance, you need to determine what that means. Is it more important for each PXI machine to have access to the shared variable, or for the host PC to have access to all 16 sets of variables? If you have slowdown or issue with the network communication, what kinds of problems would it cause for each machine?
You want to located the shared variable library on whatever machine is more critical. That is probably each PXI machine, but only you know your application.
Ravens Fan wrote:
Either. For the best performance, you need to determine what that means. Is it more important for each PXI machine to have access to the shared variable, or for the host PC to have access to all 16 sets of variables? If you have slowdown or issue with the network communication, what kinds of problems would it cause for each machine?
You want to located the shared variable library on whatever machine is more critical. That is probably each PXI machine, but only you know your application. -
What is the best way to create the layout for a single page website in Adobe Muse?
I was wondering the best way to create the layout for a single page website in Adobe Muse. Does anyone have any suggestions?
I know how to create a website but will that help me create a single page website? Below I will leave a demo of what I want. I want it to only have one page but multiple sections. What is the easiest way to create a single page website like the demo below?
Demo Website -
What is the best way to create space for a Yosemite download?
What are the best ways to create space for the download of Yosemite. I can't install it as I don't have enough space.
Did you empty Trash? Very important!
How much space do you have available? Click in the HDD icon on the desktop, COMMAND+I.
Also try a Safe Boot:
http://support.apple.com/kb/HT1564?viewlocale=en_US
That will temporarily create some additional space.
Ciao. -
What is the best way to create the correct space for baseball jersey names and numbers? along with making sure they are the right size for large printing.
Buying more hard drive space is a very valid option, here. Editing takes up lots of room, you should never discount the idea of adding more when you need it.
Another possibility is exporting to MXF OP1a using the AVC-I codec. It's not lossless, but it is Master quality. Plus the file size is a LOT smaller, so it may suit your needs. -
What is the best way to create a Scheduler app for ALL mobile devices?
I've used indesign to make apps before, (more like interactive/digital publications) and now I'm trying to make a scheduling app. What's the best way for me to accomplish this since it's a little more intricate? Indesign + DPS?? Any other recommendations?
Skipping InDesign & using HTML5/something such as Appcelerator's Titanium would be your best bet.
If you're set on using DPS, however, you'll need to make multiple multi-folio apps, single issue apps aren't supported iPhone or Android. DPS folios are also not responsive, although in some cases renditions will scale to support different devices. -
What is the best way to create a database schema from XML
What is the best way to create a database schema from XML?
i have a complex XML file that I want to create a database from and consistently import new XML files of the same schema type. Currently I have started off by mapping the XSD into Excel and using Mysql for Excel to push into MySQL.
There must be a more .net microsoft solution for this but I cannot locate the topic and tools by searching. What are the best tools and way to manage this?
Taking my C# furtherHi Saythj,
When mentioning "a database schema from XML", do you mean the
XML Schema Collections? If that is what you mean, when trying to import XML files of the same schema type, you may take the below approach.
Create an XML Schema Collection basing on your complex XML, you can find
many generating tools online to do that.
Create a Table with the above created schema typed XML column as below.
CREATE TABLE youTable( Col1 int, Col2 xml (yourXMLSchemaCollection))
Load your XML files and try to insert the xml content into the table above from C# or some other approaches. The XMLs that can't pass the validation fail inserting into that table.
If you have any question, feel free to let me know.
Eric Zhang
TechNet Community Support -
What is the best way to create 10000 users in ECC system
Dear all,
what is the best way to create 10,000 users in ECC 6 system.
As of my knowledge we can create with SECATT, but I don't know the procedure to use this.
please guide me...
Regards,
RaajaHi Raaja,
If you search in SDN or on google for eCATT tutorial, you will get all the info you need to learn to create them.
For 10000 users I would suggest the following
1. eCATT to create user ID's (include all the info like passwords, user groups in here).
2. eCATT to make the role assignment. Use SU10 to record the assignment to the users you created with the first script as it gives you more flexibility
If you have the data you need then you should be able to run both steps in 1 work day (dependent on system performance).
Edited by: Alex Ayers on Jan 25, 2009 11:16 AM -
WHAT IS THE BEST WAY TO CREATE AN XSD FILE (TO BE USED BY SOAP ADAPTER)
Dear friends
I have a simple scenario.
OUTBOUND DATA --> SOAP ADAPTER --> ( XI ) --> RFC ADAPTER --> INBOUND DATA
The XML file that I got from mapping area of IR (Design) is as follows
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_NAME_SOURCE xmlns:ns0="http://test3.com">
<FIRSTNAME>DAVE</FIRSTNAME>
<LASTNAME>SMITH</LASTNAME>
</ns0:MT_NAME_SOURCE>
If you notice, there are only 2 fields.
I need to create an XSD file and import it as an external object, which I can use for SOAP Adapter.
Which is the best way to create it.
Also, I need to know if there is any step by step of sending a message from XML SPY. I have downloaded this software, but am not able to undertand how to use this.
Hope to hear from any experts on this forum.
Thanks in advance
RamHi Ram,
See the below blog..
It shows how to send SOAP message using XML Spy.
It also shows how to generate wsdl.
/people/siva.maranani/blog/2005/09/03/invoke-webservices-using-sapxi
Regards,
Sumit -
What is the best way to create business documents in CRM
Hi All,
What is the best way to create business documents like contract, sales order, debit memo etc in CRM ? Unlike R3 we can't use our good old BDC with recording. Moreover for most of them although there are Business Object but no BAPI to creation so what is the way ? I found in SDN there are two MAGIC Function module CRMXIF_ORDER_SAVE. Do I need to that alawys ?
Is it nees to via IDoc and cannot be done just by calling from ABAP program ? The input parameter of the FM is a complex deep structure.
Please help.Ashim,
Try looking at the program:
CRM_TEST_ORDER_MAINTAIN
I think that should help you figure out the parameters.
Good luck,
Stephen -
What is the best way to create a read more/collapse text box on the homepage of a site?
What is the best way to create a read more/collapse text box on the homepage of a site?
I figured this out by using a lightbox. I set the trigger at the top of the box, hid all initially and added a close button. In the box that would have linked to the first thumbnail for the lightbox, I added a text box that said "read more"
Maybe you are looking for
-
I have for the past three and a half hours have been trying to redeem my itunes gift card. It is for $25.00 and I need to purchase a book. My card is unreadable....The first letters and numbers are fine but the middle....looks like four numbers/lette
-
Inventory data load from Inventory Cube to another Copy Cube
Hello Experts, I am trying to load Inventory data from the Inventory cube(say YCINV) to a copy cube say YCOPY_CINV(copy of Inventory cube), but the results appear inconsistant when I compare the reports on these 2 cubes. I am trying to populate a fi
-
Are there any DVD copiers and Video- iPod converters out there?
I want something other than DVD Decrpyter and Videora, because they aren't working for me. Anything else?
-
Remove an End Node(leaf) in an XML Document
I have an object type node, where each one was one object type node, which can contain one object type node etc. I need to remove the last item, and return the new xml document see the example, any ideas? <menuItem id="itemID" graphic="" name="test01
-
Can anybody explain to me what this plist is set to do:
<?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>BonjourNetwork</key> <dict>