The best webcam for clarity

Hi everyone
i've been using a cheap webcam for awhile now. I would like to get a new one that is good. Looking for clarity mainly its just for online chatting so frame rate is not a concern. Ive been looking at the NX Ultra.
I would like other ppls input on this as to witch webcam is best.
thx
syferis

Do you happen to have a Firewire Camcorder ?
Also see the bottom this page http://homepage.mac.com/john_kenn/video.html
Although written at the time of Jaguar (iChat 2 demo) it does list some Firewire web Cams you may find in some corners of the market.
Fire-I still brings up a link
What was the iRez Kritter now leads you here with all sorts of prices. (They tend to specialise in Medical Cameras now)
After that it is looking at USB cameras
Ones that are listed as USB 2.0 and therefore more likely to be UVC compliant are the next best bet (UVC is USB Video Class which is now got a driver in the Mac OS since 10.4.9)
This chap has done some comparisons http://www.speedycam.be/webcams.html
The X-Box 360 cam has a focus ring and works on computers that have 10.4.9 and above and USB 2.0 ports (it is UVC compliant).
9:56 PM Wednesday; July 9, 2008

Similar Messages

The best webcam for the Mac Pro?

I have a 23 inch desktop and frankly, I'm upset at the iSight not being made anymore and the people making serious bank off it on ebay and amazon. I tried the agent webcam by liquid digital which is a company in australia, http://agent.liquiddigital.com.au/index.htm
The problem? Too expensive and the video did poor in well lit situations. It also looked grainy. I want a webcam that will look as good if not better than the ones on the Laptops and iMacs. It looks razor sharp at The Apple events when used for iChat demos. I want the same thing at home.

Do you happen to have a Firewire Camcorder ?
Also see the bottom this page http://homepage.mac.com/john_kenn/video.html
Although written at the time of Jaguar (iChat 2 demo) it does list some Firewire web Cams you may find in some corners of the market.
Fire-I still brings up a link
What was the iRez Kritter now leads you here with all sorts of prices. (They tend to specialise in Medical Cameras now)
After that it is looking at USB cameras
Ones that are listed as USB 2.0 and therefore more likely to be UVC compliant are the next best bet (UVC is USB Video Class which is now got a driver in the Mac OS since 10.4.9)
This chap has done some comparisons http://www.speedycam.be/webcams.html
The X-Box 360 cam has a focus ring and works on computers that have 10.4.9 and above and USB 2.0 ports (it is UVC compliant).
9:56 PM Wednesday; July 9, 2008

What is the best webcam for the Mac mini?

I have been reading everywhere and it sounds like the big thing is to find the actual webcam that works well with the Mac Mini. Don't know why Apple wouldn't release their own camera now, can someone enlight me about what webcam should go after?

Heloo,
See if these answer it...
http://www.mac-compatible-web-cam.com/
http://webcam-osx.sourceforge.net/
http://webcam-osx.sourceforge.net/cameras/index.php

What's the best webcam for Mac with tilt/pan/zoom?

I am trying to find a good quality webcam to use for videoconferencing with my Mac (MacBook Air actually). The camera is to be positioned on the 60-inch screen on the wall in our boardroom so the built-in Facetime camera doesn't do the job. It needs to have tilt/pan/zoom (in software). When I started on this search I had no idea such a thing was going to be so hard to find. There is no shortage of such products for Windows but I can't find a single one for the Mac.
There are a lot of webcams that claim to support Mac but on closer investigation not a single one of them (that I've found so far anyhow) provides any conrol features like tilt/pan/zoom - nor even brightness and contrast control for that matter. Maybe I'm looking in the wrong places because it's hard to believe the Mac world really is lacking such products. Can anyone point me in the right direction? Would be much appreciated.

You're most welcome, Julie.
dreamdoc wrote: ... I don't have a cam corder, but that's a great solution ...
If you are still shopping, you might be able to find a compatible used camcorder at a local store that sells used cameras or electronics. One with a failed tape mechanism that otherwise works would likely be very low priced. The same store may also have compact tripods.
Because your MBA is so portable, it is easy to take with you so you can test any camcorder before you buy to be certain it meets your needs.
dreamdoc wrote:... I also appreciate the reminder to close out my inquiry...
Per the Respond to answers tutorial page, you decide when to mark an answer that "solves your question."
I certainly did not intend any reminder. As a user like you, I have not authority to remind or otherwise instruct you about your participation in Discussions. As explained in ¶ 1.11 of Apple Support Communities - Terms of Use, the Apple Hosts would be the ones who would address any concerns with you if necessary.
Have fun shopping!
Message was edited by: EZ Jim
Mac OSX 10.8.5

Is iSight the BEST webcam available for Macs?

Can anyone tell me if iSight is really the best webcam for the Mac? Assuming I find the appropriate 3rd party software to support it, is there a better webcam available?
Also, my Digital Video Camcorder does will not work for this purpose.
Thanks!

Hi Matt:
Interestingly, a number of folks have been asking the same question lately. You may want to review the many posts in this forum. I think they will be quite helpful. As always, if you need anything specfic, let us know!

Best webcam for Mac mini core solo?

What is the best webcam to use for my Mac Mini with an older display - is MacAlly icecam 2 sufficient? and i'm still on 10.4.11. Many thanks for your kind responses.

I've been looking into webcams for my mini and have noticed that some webcams whilst the video works, the sound doesn't. I have an old webcam which my wife uses on our windows box, and I got it working on my mac using the Macam drivers http://webcam-osx.sourceforge.net/ The only problem was that the microphone wasn't supported, a recurring trend!! From my investigations the Logitech Quick Cam Vision Pro for Mac seems to be the best available, but it is a bit expensive £89.99 here in the UK.

Q: Best webcam for Mac SnowLeopard

Can anyone tell me the best WebCam, with Microphone, to use for the LCCS stuff.
Thanks.

I've been looking into webcams for my mini and have noticed that some webcams whilst the video works, the sound doesn't. I have an old webcam which my wife uses on our windows box, and I got it working on my mac using the Macam drivers http://webcam-osx.sourceforge.net/ The only problem was that the microphone wasn't supported, a recurring trend!! From my investigations the Logitech Quick Cam Vision Pro for Mac seems to be the best available, but it is a bit expensive £89.99 here in the UK.

Best webcam for Mac Mini with lion os

WHat is the best webcam to use on most recent mac mini (lion OS)?

I purchased a Logitech HD C910 and it works really well. The non-included software for Mac you have to download is crap, but you don't need it for Skype, iChat, PhotoBooth, Google+ hangouts, etc.
http://www.amazon.com/gp/product/B003M2YT96/ref=oh_o02_s00_i00_details

Is Rh the Best App for Managing 41 manuals, with many pages being the same?

I'd like to automate a labor intensive task that I will soon be assuming. We have 41 install manuals for an automotive accessory that fits 41 different models of vehicles. The current manual is 28 pages with at least 24 pages being identical. The documents are done in Word, along many pictures and drawings. When the document is finished, it is converted to a PDF and sent with the item. The pdf is also made available online for folks who may need the electronic version. When we change one page that is common to all, we have to manually update each Word file and then convert it. As you can imagine, the manuals don't get updated and corrected as often as they should
Since most of the pages are the same, I would like software that can manage changes to these pages and automatically update all manuals. For example, if a change is necessary on page 6 and 34 manuals use this page, I simply change one page and the software "exports" this new page to all affected manuals.
1) Would Rh do this?
2) Would it be the best choice for this task?
3) If Rh is the best choice for this, what is the best approach for beginning this task? Get a book and read or just jump in?
4) I came across a book written by a firm called GooberGuides, is this a good resource? Do you recommend a better one?
5) Does my project require a special technique when setting it up in an app like Rh or is the process fairly intuitive? I don't want to waste time by implementing this incorrectly, only to start over again when I realize there was a better way.
I would be very grateful for any guidance you could provide.
Thank you.
Rodger

I don't think your questions were answered, except for the tool one, which is not the most important one. I would reverse your questions:
Does my project require a special technique? Yes! Single sourcing, which is a methodology for developing modular, reusable information, not a tool. Before you even approach a tool, you must analyze your content, define standards for it, define information types (Google for DITA), and convert it from linear (as your Word documents are) to modular.
I have not seen the GooberGuides book, but I can definitely offer these:
Content Managment for Dynamic Web Delivery - Jo Ann Hackos
DITA 101 - Anne Rockley, Charles Cooper, and Steve Manning
Introduction to DITA: A User Guide to the Darwin Information Typing Architecture - Jennifer Linton & Kylene Bruski
Managing Enterprise Content: A Unified Content Strategy - Anne Rockley
Single Sourcing: Building Modular Documentation- Kurt Ament
Tools - obviously since we're on the Adobe forum, Technical Communication Suite must be acknowledged. But you can accomplish single sourcing with several tools. Check out a brief overview of some at http://www.writersua.com/restools.htm.
Jan Shelton

TA24002 My 500 GB can't verify nor repair. I have photoshop work that I need to recover. I would like to know which erase option would be the best solution for this problem.

My 500 GB can't verify nor repair. I have photoshop work that I need to recover. I would like to know what option would be the best solution for this problem?

You appear to have two issues: 1) a hard drive that is not working properly and 2) files you wish to recover.
Re 1) you need to answer Kappy's questions.
Re 2) does the drive load and can you see your photo files? If so can you copy them to another drive?
Do you not have a backup of the photo files?

I have problems in the initiation of the Encore process when opening presents the following error message : "Encore CS6 Cannot Run in Non-Royalty Serialized".... What is the best solution for this problem ?

Help Me.
What is the best solution for this problem ?

Encore is activated when you activate Premiere Pro... so, as Stan asked, how did you install P-Pro?
Ask for serial number http://forums.adobe.com/thread/1234635 has a FAQ link
-and a fix for Encore http://forums.adobe.com/thread/1421765?tstart=0 in reply #7
-plus more Encore http://helpx.adobe.com/encore/kb/cant-write-image-fie-larger1.html

Pls help putting together the BEST SOLUTION for PP and AE CS4

Hi guys
I was tasked to put together the best machine (machines) for video editing / rendering .. money is not an issue.
My client is a TV broadcasting network and they do lots of videos everyday .. They want to render their work as FAST as possible because sometimes they have tight deadlines and rendering and re rendering (if there are mistakes) has cost them .. so now they're serious about getting the best technology to achieve best rendering time possible, but in a bit of practical sense of course.. i mean there's no sense spending 1000USD or more for a piece of technology that offers under 10 second faster rendering only ..
What they do and want
- edit/put together/ sequence lots of videos constantly, under premiere cs3 (will upgrade to cs4 on the new machine)
- use affter effects for some effects and 3D stuffs.. but not that much.. but increasingly as time goes by and their video editors get more affter effects training..
- needs really really fast rendering!! Right now it takes them typically 1-2 hours to render stuffs, and what to cut this time by half or more..
Existing Setups on work stations:
Intel QuadCore (Q6600, i7, Q9550, Xeon x3220, and the likes)
4GB RAM DDR2 1066mhz
Highend motherboards
GeForce 9500GT , 9800GT, and GTX 260 216sp
GSKILL Falcon 64GB SSD Drive as primary
1TB Western Digital BLACK edition drives for storage
Software:
Windows XP 32 bit
Adobe Premiere Pro CS3 (80% of all their work done here)
AE CS3
etc..
Running NOD32 Antivirus
I am an somewhat of an expert in Hardware and stuff, i build custom PC's machines most of my life but i have limiited knowledge on optimizing hardware for VIDEO EDITING stuffs.. so i turn to you all.
I do understand that w/ video editing CPU is the most important, followed by RAM, and ofcourse by HDD for disc caches and stuff.. and where videocard may come to an advantage as well. and normally i'd suggest the fastest components available . i7 , extreme processors, skulltrail dual quad setups perhaps? RAID 0 SSD Drive? etc.. but I do not know w/c gives the most advantage, and w/c is a waste of money..
I also read about quadro cards offering really big performance improvements using CUDA tech etc..
again im not the expert at this type of requirment.. so i need your advises..
with unlimitted PRACTICAL budget given to me to come up w/ a solution I initially thought a rendering farm would be the solution, but upon reading around it seems there's no rendering farm solution for PP CS4.. just the adobe after effects part.. so i had to go back to the drawing board and suggest really powerful work stations instead..and perhaps have them migrate to 64bit OS for that "extra" performance.. i myself am on win7 64bit and it's looking mighty good.
1) is this the right move?
2) is it still worth it to put together rendering farm for AE renders only? or might as well concentrate funds on the machines/workstations?
Also along the PRACTICALITY LINE, would it be practical to maintain all the existing machines, and instead build a manned RENDERING MACHINE w/ PP and AE (basically desktop or Server if they are faster at rendering w/ the best specs for the purpose etc) where they can just throw the workload to some guy there for rendering? Atleast the editors can continue using the workstations while the rendering machine guy is at work? and even perhaps setup a gigabit lan network where the RENDERING MACHINES can dynamically pull the work load via the network , not needing to transfer the files to the rendering machine first ? etc
as you can see im not only looking for the best machine, but the best STRATEGY for my client.
Good suggestions would be much appreciated.
regards to all

in a nut shell no. if you do not have to "Share" then Avid is pointless Adobe is a far better answer.
Avid solutions still need a computer. The Mojo.Nitris are a joke and Avid no longer provides computers even the Symphany comes with your choice of Apple Mac Pro or HP 800. (Dual Xeon)
there are better "hardware" answers that what Avid sells for Adobe. Decklink, Aja to name a few.
if you have to share then you have no choice. this is the one area Abode does not lead.
renders have to do primarily with 2 things CPU power (Xeon will render faster than single i7)
and Drives. the faster your drive set up the faster the render. Memory does play a part and so does the video card depending on what codec and to what
it also depends on WHAT you are rendering and from what for the HDDs.
without knowing your work flow format and codec its impossible to suggest something.
in terms of rendering
Core i7
Dual Xeon (faster unless still doing DV/HDV thru firewire)
Sonnet raid array
Scott
ADK

SQL Server 2012 - Wat Is The Best Solution For Creating a Read Only Replicated/AlwaysOn Database

Hi there I was wondering if someone may have a best recommendation for the following requirement I have with regards setting up a third database server for reporting?
Current Setup
SQL Server 2012 Enterprise setup at two sites (Site A & Site B).
Configured to use AlwaysOn Availability groups for HA and DR.
Installed on Windows 2012 Servers.
This is all working and failover works fine and no issues. So…
Requirement
A third server needs to be added for the purpose of reporting, to be located on another site (Site C) possibly in another domain. This server needs to have a replicated read only copy of the live database from site A or Site B, whichever is in use. The Site
C reporting database should be as up-to-date to the Site A or Site B database as possible – preferably within a few seconds anyway….
Solution - What I believe are available to me
I believe I can use AlwaysOn and create a ReadOnly replica for the Site C. If so do I assume Site C needs to have the Enterprise version of SQL server i.e. to match Site A & Site B?
Using log shipping which if I am correct means the Site C does not need to be an Enterprise version.
Any help on the best solution for this would be greatly appreciated.
Thanks, Steve

for always on - all nodes should be part of one windows cluster..if there site C is on different domain - I do not think it works.
Logshipping works --as long as the sql on site C is is same or higher version(sql 2012 or above). you can only do read only.
IMHo, if you can make site C in the same domain then, Always is better solution else log shipping
also, if your database has enterprise level features such as - partitonin, data compression -- you cannot restore the database on lower editions- so you need to have enterprise edition.
Hope it Helps!!

What are the best practies for naming symbols (spaces OK,etc.)?

What are the best practices for symbol naming for ease, flexibility, & to avoid "gatchas" down the road?
Does it make any difference if one includes spaces in the names of symbols? Are there any widely followed conventions for naming them like using camelCase or underscores?
Thanks!

Hi Gina D 3333,
Best-practice file-naming conventions for PDF files are the same as for any other file. I found this article on Apple's website that contains some useful pointers to consider when you're naming files that will be used on multiple platforms: OS X: Cross-platform filename best practices and conventions
I hope this helps!
Best,
Sara

What is the best practice for changing view states?

I have a component with two Pie Charts that display
percentages at two specific dates (think start and end values).
But, I have three views: Start Value only, End Value only, or show
Both. I am using a ToggleButtonBar to control the display. What is
the best practice for changing this kind of view state? Right now
(since this code was inherited), the view states are changed in an
ActionScript function which sets the visible and includeInLayout
properties on each Pie Chart based on the selectedIndex of the
ToggleButtonBar, but, this just doesn't seem like the best way to
do this - not very dynamic. I'd like to be able to change the state
based on the name of the selectedItem, in case the order of the
ToggleButtons changes, and since I am storing the name of the
selectedItem for future reference.
Would using States be better? If so, what would be the best
way to implement this?
Thanks.

I would stick with non-states, as I have always heard that
states are more for smaller components that need to change under
certain conditions, like a login screen that changes if the user
needs to register.
That said, if the UI of what you are dealing with is not
overly complex, and if it will not become overly complex, maybe
states is the way to go.
Looking at your code, I don't think you'll save much in terms
of lines of code.

The best webcam for clarity

Similar Messages

Maybe you are looking for