The Black Dream by C.333

The Black Dream by C.333
Hello everyone, my name is Ermanno but my nik is Corsaronero333.
I was invited to post here my next job
of course, forgive my English, I use a translator
For me, this forum is new and correct me if I wrong
Thanks for your cooperation

The work continues, and today I made a window to see the Raid 0 of ssd Kingston Hyperix 3K

Similar Messages

The impossible dream?

I have what appears to be an impossible dream. I want to go real-time firewire to a DVD burner and get a clean artifact-free copy of my project. I have yet to see a DVD-authoring software (and I've tried a few including pro mastering services) that gives me as good a picture as I get by (a)going firewire to my Sony DSR-11 DVCAM deck and then (b) going out to a consumer-level DVD recorder via S-VIDEO!!!
Because every DVD recorder adds another setup via firewire it bleaches my picture out. The s-video at least preserves the blacks.
This has been about the most frustrating thing I've encountered. Spend all this dough on equipment and be unable to simply burn a clean DVD of your project through firewire.
I don't really even have to have a menu. I produce unnarrated nature DVDs of one-hour length and would really like them to just play when inserted. I've sold quite a few of these over the years--and all with a tacky consumer-grade title menu (never had a complaint but it looks awful).
There must be a better way. Is the MPAA behind all of this nonsense?

Thanks for the responses. Believe me I would love to produce a good looking DVD using authoring software. I just haven't found anything that equaled (to date) what I get using that wacky workflow of mine. Did another test since I last posted using bitvice 1.8 with the "DV Color Correction" box unchecked (not the default setting) and I must say it looked much better (the first test was way too bright and looked overexposed--but the audio was killer!). I can see where some skillful tweaking could produce aceptable results--especially in the blacks.
This bitvice test was the first authoring software I've tried in years and I really had my hopes up (it's obvious Compressor is still frustrating people because I see unhappy users regularly complaining about picture quality on that forum). I admittedly may still be traumatized by my experience four years ago trying to use Compressor, other softwares, and two different service agencies to master our four titles for DVD release from our DVCPRO master tapes. The result was a strange shimmery "overlay" effect, blocky artifacting during cross dissolves, trees turned to mush, etc. Believe me the s-video from DVCAM to Sony DVD burner, tacky menu page and all, got the job done WAY better than anything else and in desperation my wife and I used it and we have had consistent praise for our picture quality these past four years.
I'll read the suggested article and try the tips suggested. Is there a good Compression/DVD authoring tutorial or book anyone could recommend?

How can I print with the black and white cartridge only?

I am trying to print using the black and white cartridge only because magenta is out of ink but I'm getting the following error message in HP Photosmart C7200 series print dialog:
The printer is out of ink.
The following ink cartridges are empty: Magenta. Replace these ink cartridges to resume printing.
How can I print with the black and white cartridge only?
Mac OSX 10.7.3
HP Photosmart C7280 (7200 series)
This question was solved.
View Solution.

I am absolutely disgusted by this; clearly a scam from HP to make more money by selling extra ink cartridges!! I will make sure to never buy any products from the shoddy rip off merchants at HP ever again!!
You should be ashamed!!

HT201412 Iphone 4s is frozen on the black apple logo screen. have tried to hard power off but it will not turn on. Have connected to computer but device it is not recognizing the device so can't do an itunes update. any suggestions?

My phone is frozen and I can not get it to "Wake up"
Stuck on the black apple logo screen. And my computer and itunes are not responding when I plug it in.
Any ideas?

try doing a restart / reset first
http://support.apple.com/kb/ht1430
if this doesn't work
You can try the step here in this link.
http://support.apple.com/kb/ht1808
when you're stuck on the apple logo, the operating iOS doesn't load so itunes could not detect the device

There is a problem on my mac mini. I install windows7 in my mac then i cancelled the installation did not finish..after that i saw the black screen on my monitor..

There is a problem on my mac mini. I install windows7 in my mac then i cancelled the installation did not finish..after that i saw the black screen on my monitor untill now the monitor is black..

It maybe trying to boot from the incomplete install.
Try starting your Mac while holding down the Option key, it should then list all the available boot drives including the Mac OS X one. Boot from the Mac one and then you can wipe the damaged PC one or set the Mac to stay booting in to OS X.

I am going to sell my second generation ipod touch, so i resetted it to factory defaults. It said it would take up to an hour, and i patiently waited. But when the black and white loading bar completed, the ipod went to the black screen with an apple logo

I am going to sell my second generation ipod touch, so i resetted it to factory defaults. It said it would take up to an hour, and i patiently waited. But when the black and white loading bar completed, the ipod went to the black screen with an apple logo on it. Sounds about right, right? But now, there is a processing circle on top of the logo, but the circle spins once, and stops at about halfway to the bottom. It just stays there, and about every half to one hour it becomes a white screen and starts all over again. (not the loading bar part, just the circle). I've tried holding the power and the home button, and it works, but it just goes back to the circle screen with the apple logo. HELP PLEASE?

Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

When i try to turn ipod touch on it stays on the black screen with the apple and nothing else happens. whats wrong?

okay so just as i was typing this the problem resolved itself, but when i went to charge my ipod i noticed ot stayed on the black screen with the apple for a good 10 minutes, so i pressed buttons furiously (!!) and the screen went white and then back on to the screen with apple again. this contiinued for a good 4 tries then eventually went on to my lock screen (which is the very beautiful dom howard not that you know who that is and i dont even know any of you so i dont know why im typing all of this out but i really enjoy typing it's an incredibly exciting past time of mine but unfortunately i havent used capital letters) just wondering if it will happen again

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I booted up this morning to find my voice over feature active. A black bar was at the lower left corner of my screen. When I began to click on the users in my login window it would not respond. All that I saw was the black bar saying authentication busy.

I booted up this morning to find my voice over feature active. A black bar was at the lower left corner of my screen. When I began to click on the users in my login window it would not respond. All that I saw was the black bar saying authentication busy. I was not able to restart, I was not able to switch users, I was not able to shut down. I decided to manually shut down my Mac. when it booted back up I was looking at the disk utility screen. When I clicked on repair or race it indicated that my hard drive had already been arranged. I was looking at completely formatted drive and I was having to either restore from Time Machine or reinstall lion. I had a back up but why did this happen?

A possible workaround could be to have the horizontal scroll bar visible all the time.
<pre><nowiki>body { overflow-x: scroll !important; }</nowiki></pre>
* Stylish: https://addons.mozilla.org/firefox/addon/stylish/

My ipod 5th gen ios 7.0.6 crashed and keeps going from the apple logo, going to a black screen, back to the apple logo, then back to the black screen and so on. Furthermore, my laptop doesn't recognise that the iPod is connected. What do I do?

My ipod 5th gen ios 7.0.6 crashed and keeps going from the apple logo, going to a black screen, back to the apple logo, then back to the black screen and so on. Furthermore, my laptop doesn't recognise that the iPod is connected. What do I do?
Please help me out as this is very irritating. This has been happening for the last 20-30 minutes. It had roughly half battery left.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

HT4061 ipod 4th generation stuck on start up screen, won't do anything (the black screen with the silverish apple). Help?

This morning, i tried turning on my ipod (4th generation) and it is stuck at the black start upp screen (the screen that has the siverish apple when you have first turned on your device). It has been stuck like this for about a half an hour now, and I'm not sure what to do. This would be the second time in at least three months I have had problems with it (around December it went into recovery mode and i had to reset it to the factory settings). Is there anyway I can handle this at home, or do i have to go into an apple store to have this fixed? Also, I plugged it into my computer and it didnt show up in itunes like it did last time. Thanks! (I'm pretty sure its the IOS 6 because i have not updated it since then).

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Whenever i go to open a picture message in full view the black loading screen just comes up with no picture? (verizon iphone 5)

I have a 32gig iphone 5 on verizon and whenever i go to open a picture message the black screen that says loading just comes up and i can't view the picture... any help? PLEASE!

Try using the wall charger to charge your iPhone. Some USB ports do not enough power to charge your phone, or at the very least, it will take a much longer time than a wall charger.
You will find that after having it plugged into the wall for 10min, it will have enough power to indicate that the battery is now charging.
Save your money from buying a battery for your next iPhone :-)

Where and How can I get the Black Lenovo Login Screen for Windows 7 for X120e?

Hello,
I just installed Windows 7 on a SSD on my X120e. It is a fresh install and I really liked the Black Login Screen that my Lenovo X120e that came on the regular drive. Is there a way to download this screen and make my login screen back to this screen?
Thanks.!

qubilist wrote:
I just installed Windows 7 on a SSD on my X120e. It is a fresh install and I really liked the Black Login Screen that my Lenovo X120e that came on the regular drive. Is there a way to download this screen and make my login screen back to this screen?
Create Recovery Discs from your HDD, then load them onto the SSD.
Hope that helps,
John
ThinkPad T450s [ i7-5600U | 8GB | 1TB SSD | Full HD IPS | 802.11ac | BT | Webcam | FR | Win8.1Pro64 ]

What is new for the Lumia 620 in the black update

What is new for the Lumia 620 in the black update ?

It seems Lumia 620 doesn't benefit the "double tap to wake", other than that all announced apps and features will be available. I advise to check also some great beta apps from Nokia Beta Labs, kudos to the guys developing these.

How to print Adobe Forms without the black/gray backgrounds in the side columns

How can we print Adobe Forms without the black/gray backgrounds in the side columns? We are wasting a lot of ink printing out these forms and would like to have simply black ilnes to distinguish columns and black lettering, but no background colors. Any help would be appreciated. Thanks.

I am not positive what you are printing from but I am thinking it is from the View Responses tab with a response row selected and then shown in "Detail View" and that the column of field names has a dark grey background...
To change the color of the column headers select the row of headers (do this by clicking on the first dark grey header field and then scroll to the last one and shift+click on the last one), then in the "Text" tools change the text color to Black and the Fill color to white:
(Selected the header cells)
Changed the text/font color to black and the fill color to white
Now you can see the detail view does not have the dark grey.
Thanks,
Josh

I have a model 1,1 Mac Book in the black case. How can I transfer about 30 GB of stuff to a MacBook Pro running Yosemite? Can't do a Thunderbolt transfer. The Seagate backup drive I bought doesn't support 10.5.8. Thank you.

How do I transfer 30 GB of stuff, mostly text documents, bookmarks and a few hundred photos from a MacBook model 1,1 in the black case, purchased in (2007?) running Leopard 10.5.8 with a 667 bus, 2 GB, 256 GB to a MBP 13" Retina running Yosemite 10.10.1? Using Migrate is out. Discovered after I bought it that the Seagate Plus Backup for Mac does not work with 10.5.8. OnetoOne recommends backing up my data before I do that, which seems like a good idea. Have a 801.11 n Time Capsule that also isn't working so that is not presently an option. Thank you.

The Seagate backup drive I bought doesn't support 10.5.8
The only reason I can see for that is it's formatted NTFS, which would likely be Read Only in 10.5.x, if you can reformat it MacOS extended, which would erase everything on it now, then that should work for your purposes.

The Black Dream by C.333

Similar Messages

Maybe you are looking for