The bluetooth is incompatible
The bluetooth is incompatible with the nokia c6 I want transfer my contacts
You can't transfer contacts via Bluetooth.
Sync the contacts from the Nokia to your computer, then sync the contacts on the computer to your iPhone.
The iPhone is designed to be synced with a contact manager on your computer.
Similar Messages
-
Is there any way to get a log of the bluetooth devices my Iphone has been connected to? I recenly had my Bluetooth Jabra stolen from my car and now a simliar one is on Craigslist. I'd like to give my connection log to the police before I go and see if my Iphone recognizes the device in question. Any way to get any type of bluetooth device connection log out of my iphone?
Your contacts should still be on whatever program you sync your iphone to (i.e. Outlook, address book).
The iphone is not a stand alone device. It is designed to be synced with a computer. If you have not been syncing with a compatible program, then you are out of luck. Your contacts are not included in the back-up because it is meant to be synced with your computer.
"Although iTunes backs up most of your iPhone and iPod touch settings, downloaded applications, and other information (Contacts, calendars, notes, images in the Camera Roll), your audio, video, and photo content are not included in the backup."
http://support.apple.com/kb/HT1414 -
The Bluetooth low energy protocol is not backward compatible with classic Bluetooth protocol.
My iPhone 4s can not find my sonny in-dash player. However my iPhone 3GS does it. Very disappointed with this.
Any idea how it can be fixed??????Hello,
You are correct, Blue tooth low engergy, BTLE.(only) devices are not backward compatible with Classic bluetooth and cannot connect.
However the Apple 4S and above have Bluetooth 4.0 support.. Hardware wise it has bothClassic Bluetooth, like the 3GS, as well as Bluetooth Low Energy. There is no good reason why your 4s cannot communicate to your Sony in-dash player using the Classic bluetooth that resides in the 4S.
I know that this does not answer the why it does not work, but it should work. Do you have to somehow re-pair the new phone up to the player? Not knowing the model of the Sony it is hard to investigate.
And I hate to ask but are you sure that the Bluetooth radio is on in the phone?
JT -
How do I upload the contacts from my iPhone 5S to the Bluetooth device on my Toyota RAV4? The car manual says to consult the phone's Bluetooth instruction manual, but I don't have a manual for that.
That is very strange... I wonder if it has something to do with the firmware or some sort of error. I haven't ran into this but at the shop I work at I've ran into several firmware errors on iPhone 4 all the way through the 5s. Maybe its something as simple as putting a different part of the code into iTunes... I know you can something of this extent. I would look up error 1669, I know you have tried a number of things but look it up on the forum and see what fixes are available so that you may be able to restore it properly without all this garbage you are running into. Just a thought for you.
-
The first day I got it, it was fine. Then when I woke up the next day which was less than 12 hours after hooking it up, it wouldn't connect..it let me type a couple of characters to my password, but then literally stopped. My trackpad has yet to have any issues whatsoever. Even during the keyboard malfunctioning it's been fine. In order to get the keyboard to work, I have to log into the guest account, let it be discovered, then pair it. It as now happened on 4 different days, more times than that, though. I've only had it for just over a week. I don't think there's a problem with the computer just because the trackpad is fine. The keyboard blinks that little green light when it's having this issue, too. As you know, it's normally off. Today I tried to log in for the first time and it did the same thing as the first day. It let me type a few characters, then stopped and wouldn't connect. This time, though, when I went into the guest account to let it be discovered it wouldn't let me type the numeric code to pair it. I had to hold down my power button to restart it because I was logged in on another user and it wouldn't let me restart it the normal way without typing the admin username/password...which I obviously couldn't do seeing as how I didn't have a keyboard. Does anyone else think this is a faulty keyboard I need to return? Or is this unfortunately how it works...or what? Help please...
I was at the Apple Store that week 5 times for a messed up phone that they replaced with a total of 4 replacement phones because of different issues the ones they gave me had and driving there that much almost made me say screw it to the iPhone...now I buy this very expensive iMac spending 2 grand and this happens....I'm so mad I am thinking of just returning it and giving up on Apple altogether which Idon't WANT to do...but with all I've dealt with in a 2 week period with the iPhone and now this...oh and I bought a $100 cell phone case I had to replace because it wasn't working correctly. So you see, I am beyond frustartee over Apple.....if anyone could help I'd greatly appreciate it. With all of my problems I've had, you'd think they want to do more than apologize for my inconvenience. Even the techs that helped me said it was ridiculous I've had so many issues and now I'm just adding to the list..Try this:
Go to System Preferences - Bluetooth. Delete the keyboard from the list of devices by pressing the "-" button. Take the batteries out of the keyboard and reinsert them. In Bluetooth Preferences press the '+" button to add the new device. If the keyboard begins to pair, click the word "pair" and type in the passcode. Press return. The keyboard is now paired.
If the mouse is not pairing, try this: shut down the computer completely, unplug any USB mice, then turn off the power to the bluetooth mouse. ONce the computer starts up again, wait for the pop-up looking for a mouse. Turn on the power to the bluetooth mouse. It should work normally now. -
when bluetooth headset is connected to iphone,I can't hear iphone ringing aloud when I have a call or a text. Do i really have to wear the bluetooth headset all the time in my ear to know when I have a call or a message? Why it doesnt ring through iphone but it rings through the bluetooth headsets?
In other phones, you can hear the phone ringing and if it was connected to bluetooth, you could pick up the call from the bluetooth headset.
Here with iphone, if its connected to bluetooth headset, it only rings through the headset, which means that if you dont have the headset in the ear all the time, you cannot know that you have an incoming call or message.
Any ideas - solutions - comments please?I'm having the same problem. I had a plantronics 975 (which I lost, sadly). When connected, the ringer would always be routed through the bluetooth and the iPhone's external speaker. When in silent mode, the iPhone would only vibrate, but I could still hear the ringer in the bluetooth.
I just bought a new Plantronics Voyager+. Now when it's connected, all sounds are routed to the earpiece - including the taps, etc. The iPhone's speaker doesn't ring at all, unless the bluetooth is disconnected or powered off. I'd really like to be able to hear both, like I was before. This is an iPhone 3G running iOS 4 (latest version, not sure what it is exactly). Haven't updated software/firmware in between bluetooths, just changed the earpiece. -
How to prolong the bluetooth timeout session on ipad and iphone
how to prolong the bluetooth timeout session on ipad and iphone?
I understannd that the standard timeout setting is 3 mins. what if I want to prolong the connection duration, how should I do?
thanksTo my knowledge, there is no "time out" on a device. A mouse, KB, etc will go into a low power mode after a short period of non-use.
Barry -
can we get apple to make a fix to download that would enable the bluetooth file sharing with any deivce? i would like to to stay with Apple iphone but if they dont improve the lack of features.. i will move on and I know im not the only person to think like this.
regards
gavin_pThere is not "fix" to be provided, Apple made a decision to not include the file sharing profile.
You are welcome to provide feedback, but after six years, I would not hold your breath.
Feedback can be left here: http://www.apple.com/feedback/iphone.html -
How I got the Bluetooth Magic mouse and Aluminum keyboard to work in XP
NOTE: The following steps fixed my issue. I thought I would share what worked for me but I really don't ever visit these discussion groups. I used a combination of Sysinternal tools to isolate what was causing my issue and rectified it.
I couldn't for the life of me get the bluetooth magic mouse and keyboard working in a bootcamp'd windows xp. Here are the steps that I performed to finally get it to work. The assumptions are that you are running a clean XP build with SP3 and all windows updates installed.
1. Using a USB mouse and keyboard. Insert the OS X install disc into the drive and run through the bootcamp drivers install. (These steps are outlined at Page 12 in the Apple Boot Camp Installation Guide: http://manuals.info.apple.com/en/bootcampinstall-setup.pdf). Let the installers run per apple instructions in the bootcamp installation guide. At the end it will want to reboot. Reboot the system.
2. After the system reboots login and run the Apple Software Update utility to update from bootcamp 3.1 to 3.2. It will run through a bunch of installers and ask to reboot at the end. Reboot.
3. After the system reboots login and go to start=>run and type "services.msc" to bring up the services control panel.
4. Double-click the "Bluetooth Support Service" to open the properties.
5. Go to the "log on" tab and look to see what is set. If it is set to "NT Authority\LocalService" then click above it to change to "Local System account." Then click "OK." It will tell you the changes won't take effect until the service is restarted. No worries.
6. You will be back in the main services control panel. Make sure the "Bluetooth Support Service" is highlighted and look up to the left and select "restart the service."
7. Close all the open windows and then go to start=>run and type "control panel" and hit enter.
8. Double-click the "Bluetooth devices" control panel applet and follow the Apple instructions provided on Page 18 of the guide referred to earlier. Start with the mouse first. Stop when done with the mouse and don't continue on to the keyboard yet.
9. At this point my mouse was "installed" but did not show "connected" in the bluetooth devices applet. I then highlighted the mouse and clicked the "properties" button down to the right.
10. Once in the properties of the mouse I selected the "services" tab. My issue before making the switch to "Local System" account for the Bluetooth services was then when I tried to click the check box to enable "Drivers for keyboard, mice, etc (HID)" I would get an "access denied" error. Now that the switch has been made you should be able to click that check box without error. Click OK after enabling.
11. You will suddenly see systray (lower right of the screen where the clock is) saying that new hardware has been detected and enabled. Once this is all done you will see "connected" below the device in the Bluetooth applet. Give your mouse a go. It should be working now. Sweet!
12. Follow the steps in the Apple guide for your keyboard. This should work too now. Sweet!
Best of luck.It depends on how far it is and how thick your walls are. If there plasterboard partitions and only 10 feet apart then probably.
If you have a mobile phone with bluetooth, then try sending the computer a picture of file from similar distances to that you intend using the keyboard, if it works then a bluetooth keyboard and mouse should. -
System sounds through the Bluetooth headset while listening to audio
Not sure if anyone had this issue, I have read a few about cars and bluetooth connections but no mention of system sounds not operating.
I was using Motorola S9 bluetooth headset and the music was fine, but after I returned home I noticed that I had missed several text and some email notifications. The sounds operated correctly without the headset connected so, my only guess is would it be related to the Bluetooth operation?
Thanks, Joe.
Post relates to: Pre p100eww (Sprint)Could this be patched in the 2.0 release? I can't wait til christmas; no really, I hope they don't take that long to release the update.
-
I saw an advertisement in a car magazine for an app that would provide gauge read outs available for download from the app store. So I went to the app store, found the app, downloaded and installed it. I then purchased the Bluetooth OBD hardware adapter required to transmit the data from the car to the phone. The adapter has to be configured for the app to communicate with it. This is an apple approved app. But everything I've read says that apple will not allow iPhone owners to make any adjustments to their Bluetooth addresses. And that iPhone only provides Bluetooth connectivity to basic head sets speakers and audio formats through the car stereos ( but no audio streaming).
Bottom line, apple approved app and hardware that can't be configured unless I perform a jailbreak? I don't want to JB the phone but it seems that apple has left me with no other options. I've already invested time and money on this software and hardware. Their must be a legitimate way to use this apple approved software. Does anyone know how to adjust/configure bluetooth settings/addresses?Generally, if you have to enter a code for bluetooth, your iPhone will ask you to enter a 4 digit code when pairing. Check the instructions for the device you are trying to pair with your iPhone. The instructions should give you the code in the pairing instructions, if a code is required.
-
How do you use the bluetooth VIs with a Microsoft Bluetooth Driver?
How do you use the LabVIEW Bluetooth VIs with the Microsoft Bluetooth driver? I have been trying with no such luck.
I want to use 2 computers to talk to each other using the bluetooth VIs. Eventually, I think we would like a PDA/phone to talk to a custom built electronics board with Bluetooth. But for now, I would just like 2 computers to talk and then eventually talk to our own device.
One is a desktop w/ the Belkin F8T012 USB adapter. It installs fine with the Belkin driver (but I know I need to use the Microsoft Driver in order to use the LabVIEW VIs, but I have tried to get Windows to install its own but it says it is a BCM92045DG-Flash. It says it cannot install it because it cannot find the necessary hardware. I thought this USB adapter was on the approved Bluetooth devices list? What else should I try? Another Bluetooth USB adapter?
The other computer is a Dell Latitude 820. It has a built in Bluetooth module which I believe is the Dell 350 Bluetooth Module. On this machine I have been able to setup a COM port with a bluetooth device (blood glucose meter). It came with a serial port interface which we modifed to go through a bluetooth interface. It comes up as COM40. We have been able to communicate to it using their program originally designed to talk through a serial port. But we would like to use the Bluetooth VIs in LabVIEW. I can't even use the Discover VI. Perhaps it is not using the Microsoft Driver as well. Do I just uninstall the driver and then try to have Windows install its own driver? Do you have any other recommendations?
Thanks,
JaviHi Javi,
This sounds like an issue with Windows and your specific Bluetooth devices. As you mentioned, the LV Bluetooth VI's do require that the devices use the Windows drivers. Take a look at this link for specific requirements for using Bluetooth with LabVIEW. Also, you can take a look at our Developer Zone tutorial on designing Bluetooth applications a found here. Regarding your device drivers, sometimes it is as easy as uninstalling the driver and then letting Windows discover the device and fine its own driver. You could check out the Microsoft Knowledgebase for more information. Thanks and have a great day!
Stephen S.
National Instruments
1 Test is worth 1000 expert opinions -
Hi
I have an IPad mini WiFi (not cellular) and an IPhone 5. I use the bluetooth connection between both devices when on the road. I downloaded a navigation system on my IPad using GPS positioning. Is the Bluetooth connection working to use GPS positioning on the IPad using IPhone 5 as the hotspot?
Thanks for your input
Felix013try a RESET ALL SETTINGS
-
I have the new IPad and can't connect via bluetooth to any of my apple devices (IPhone 4s and appleTV) neither from my new IPhone 4s. When I turn the Bluetooth on, both devices keep in searching mode... I don't know what to do now... Please help... I can't pair any device because they can't find whitin themselves.
Wmorlac wrote:
I have the new IPad and can't connect via bluetooth to any of my apple devices...
Correct... See Supported Bluetooth Profiles Here...
http://support.apple.com/kb/HT3647
Suggest you check the User Guides of your Devices to find the Method of what you are trying to do -
Is there a way to put the bluetooth icon on the homepage?
I pair my iphone with my car when I'm driving. Is there a way to put the bluetooth icon on the homepage so I don't have to go through settings to turn the bluetooth on and off?
I don't like to leave the bluetooth on all the time because it drains the battery, but it's kinda a pain to have to go through settings everytime I want to use this feature.
On my last cell phone I could assign a "hot key" to automatically turn the bluetooth on and off. I really liked that. This bluetooth system seems a little dated to me.No not yet, hopfully soon.
Maybe you are looking for
-
friends... i have designed a form z_pm_common..which i have copied from standard.pm_common. i have made some changes to the layout. now at the header i have a field : DURATION OF JOB :&AFVGD-ARBEI& &AFVGD-ARBEH& AFVGD-ARBEI IS WORK DURATION.I.E 6.3
-
My VI has a state machine configuration. What I need to do is in a few states I have user dialogs present whihc tell the user what to do. Now what I want to do is to have a dialog where if the user hits the space bar the process execution moves to th
-
How to create subfolder under /userhome
Hi, I have a requirement where the user should have a subfolder under the foldre (userhome). When ever a user is created this subfolder should be created. Like Favorites, Personal Documents etc.. i need some other folder like "Temp" under the userhom
-
I like using Appleworks 6 word processing. (I have Appleworks 6.2.9) I also like using TextEdit. With TextEdit, spelling of words is corrected as I type. How can you do this with Appleworks 6? Or is Appleworks no longer part of OS X? Thank you.
-
After PDK Update J2EE will not start
Hello, I have just updated the .Net Runtime on our portal to version 2.5 The system was working fine but after I restarted the portal it will not come back up again. The developer trace is show below. Does anyone have any ideas? Not sure if the .Net