The bottom row of my key board keys are not working

Try Holdong down your Power button and home button to hard reset your phone. (this will not wipe anything, It just restarts your phone.)

Similar Messages

The g, h and backspace on my keyboard are not working even after replacing with a new one.

The g, h and backspace on my keyboard are not working even after replacing with a new one. I have also updated my BIOS still d same. Please help me ASAP.
...am waiting for a QIUCK RESPONSE

How does a usb keyboard attached externally work?
You might try a "hard reset" where you remove battery and AC charger, hold down power button 20-30 seconds and then reassemble and turn on. Reset BIOS (F10) to default settings, too.

I upgraded to the 4.3.5, and half my apps are not working. how do i get back to 4.3.3?

i upgraded to the 4.3.5, and half my apps are not working. how do i get back to 4.3.3? all my best and regular apps are not working and i need them! so how do i down grade

There is no legitimate (Apple supported) way to downgrad an iOS on a device. Have you tried downloading/installing a new (free) app. That works for many users with that problem.

All the links to download DREAMWEAVER CS3 Creative Suite are not working. How can I download the file ? I have a serial number of a purchased software.

All the links to download DREAMWEAVER CS3 Creative Suite are not working. How can I download the file ? I have a serial number of a purchased software.

They work just fine. whatever issues you have are specific, but without proper system info, browser info and other details nobody can even begin to guess.
Mylenium

The bottom row of my keyboard on my laptop isnt working

the bottom row of my keyboard isn't working...HELP!

Is the problem with the on-screen keyboard or an external bluetooth connected keyboard?
Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
 Cheers, Tom

Not Start up, Key board and Mouse not WORKING

I have Pavilion G7-2017us Notebook and it has Windows 7 operation system. Symptom: Start the computer, go through to the windowns log-in page, but Keyboard and mouse are frozen, not WORKING. Can't log in.
force Poweroff computer and use ESC, F9 can go to system diagnose page, keyboard and mouse are WORKING now. Tried "Start-up test",
Processor Check,Memory Test, Hard Disk SMART Check are Passed. Only Hard Disk Short DST is failed. Failure ID : GLMP00-69B7NV-MFPX1G-60SJ03
So Start-up test is FAILED. Tried "System Tune-up", Processor Check,Hard Disk SMART Check are Passed. Only Hard Disk Short DST is failed.
Failure ID : GLMP00-69B7NV-MFPX1G-60SJ03.So System Tune-up Is FAILED. Tried "Hard Disk Test", Hard Disk SMART Check is Passed and Only Hard Disk Short DST is failed.Failure ID : GLMP00-69B7NV-MFPX1G-60SJ03.
So Hard Disk Test Is FAILED. When I performed above test, keyboard and mouse were WORKING properly. Tried Safe mode, but can not log-in because keyboard and mouse are not working at that time. I cared about documents and was able to copy some files to external harddisk under DOS command interface. But right now I can not adjust
this laptop back to normal DOS from safe mode log-in. When I started up it. it goes through to log-in page in Safe mode. Also F11 is not
working because I did not make system recovery point and it can not be recoveried. Please help me for this issue. Thank you very much.

Thank you, Visruth. When you said the failure ID indicates failling or failed HDD, do you mean that the old HDD is bad and probably all the data on it will be lost ? Yes, in order to salvage data from the old HDD, I have tried to buy an external enclosure and take that harddrive out to make an external hard drive. Connect it through USB , but the new laptop can not recognize it and I can see this external hard drive shown in the device manager, but I can not see more detailed information of that drive. Click it and it asks that do you want to format that drive? So I would like to salvage data from the old HDD. I have been able to enter into DOS command in the old laptop and copied all data on my desktop in C drive. But right now I have forced this old laptop to run into safe mode, which I think maybe I have a chance. But keyboard and mouse are still frozen at log-in page. I do not know how to get back to DOS command as I did before. If I can go back to DOS command, I may use DOS Xcopy to copy out all my data in the old HDD to new external drive. Would you please show me how to get back to DOS command from safe mode log in? I have tried F8, F9. no success. Another way I am thinking is that to take the old HDD as an external drive, connect to a new laptop, change that new laptop's start up sequence, put the USB external drive start up as the first choice. I really do not know why my keyboard and mouse in the old laoptop do not work at some time (log-in page). Please let me know your advice. Thank you very much.

Virtual key board functionality is not working in Fire Fox but works in IE/Chrome.

Hi Team,
In home page,Virtual key board functionality has been implemented and working fine in IE and Chrome but not in Fire Fox(all versions)
The value typed in first field(ex.12345) is getting appended in the second fiied value when we type abcd in second field like 12345abcd

Hi All,
Observed that //window.document.keyboard.SetVariable("out_ti.text", sendTextVKB);// is not working in fire fox and hence old value itself is avil.
Do we have any other option to get the above funcationality(setVariable)
Pls help me

Some keys on keyboard are not working

Laptop: HP DM4 2070us
just recently, some of my keys are not responding or working when i press on them. I have not spilled or dropped my laptop but suddenly, my backspace, various numbers, and various f1 to f12 will not respond when i try to use them. it is very troublesome not being able to use my backspace bar and it is bugging me! i tried scanning my laptop for viruses but nothing was found. Im not sure if it could be a circuit problem or something but i need to fix it asap because i need my laptop for class. Please help me if anyone knows what may be the problem!!
Thank you!

Hi
You have a couple of options as I see it please try these steps given below might help you to fix your issue.
1) Go to Device Manager and uninstall the click on + symbol next to Keyboard then uninstall the standard keyboard then restart your unit and check.
2) Go to HP website and update the Bios on the unit.
3) Click start type Command Prompt check if all the numbers & alphabets works fine in this screen if not you might have to replace the keyboard.
If your notebook is still under warranty, contact HP and arrange to have the part replaced.
If you are out of warranty and would like a guide on replacing the part yourself, please let me know.
Let us know how it goes!
*Although I am an HP employee, I am speaking for myself and not for HP.
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

The keyboard and track pad on my macbook are not working at all!!

I have a macbook , The problem is that the keyboard and the trackpad isn't working at all but the laptop is runnig fine and i can use external USB keyboard
Any help .... :@

Hey Stu,
Same here. First I was under iOS 8.0.0, brand new 6 plus. Reminders had the same problem: I can't add any task and can't add a new page, can't change the name of the blank page I have in front of me, my reminders are not synced with the computer.
The only thing I can do is clic on the alarm icon (half-hidden) and when I do it's also blank and I can't add anything, Siri can't either.
I tried updating to iOS 8.0.2, I tried turning on off the phone, turing on/off the sync with iCloud, restarting the app... Nothing worked.
I added a screen shot of both the only screens I can see (in french, but "Nouvelle liste" means "New list" and "Programmé" means "Scheduled" so you should recognise the screens).

The instrument inputs on my Apogee Duet 1 are not working and the device isn't appearing in Maestro 2.

The microphone inputs and the audio are working, but not always as they originally did. I consistently updated the drivers and have uninstalled and reinstalled the program several times. I had been having a similar issue with the microphone inputs and after a few reinstalls get them to work, but I'm not having any luck doing the same for the instruments inputs.

Hi Gen,
I'd be happy to elaborate and thanks so much for responding. The problem I had with the mic inputs in the past is similar to what's going on with the instrument inputs now. The mic inputs would work for a bit and then randomly stop. I'd go into the Apogee preferences in Logic and try to reset stuff, turn phantom power on and off, and play with the pre-amp levels which sometimes would work but often times not. The big difference between what happened with the mics and what's happening with the instrument inputs is that I could always get a read/level on the mics even though I couldn't hear them, but with the instrument inputs I'm getting nothing. Other than this, the mic inputs have worked as they should.
There have been two issues with the audio not working like it originally did. The main issue is that about 90% of the time I can control the output levels (whether in Logic, on the web, or in iTunes) using either the volume controls on my MacBook Pro or the dial on the Apogee. Occasionally, the Apogee will take over and I can only adjust the volume using the its dial. Normally, if I unplug and plug it back in this "fixes" it.
The other weird thing the audio is doing that just started happening and doesn't happen very often is that I'll go to watch something on YouTube, Vimeo, etc and the audio only comes out of the left channel. I'll mute the audio from my computer and/or using the Apogee's dial and I'll unplug and plug it back in, but normally I just have to deal until it fixes itself.
Here's a best guess timeline for when problems started showing up:
- The mic input issues have been on and off for about two and a half years.
- The audio output issue has been kind of off and on for a few years but became a more regular occurrence about     2 months ago and I believe it was after a reinstall that it started
- The left channel isolation started about a little more than month ago, probably around the same time as the audio
output and probably has something to do with the reinstall
** I'm really unsure how long ago the instrument output problem started because I hadn't been using them for             quite some time. I think they were working correctly 7-8 months ago and I noticed the problem about 2-3
    months back. I tried fiddling around with it for about a month before a reinstalled the drivers around 2 months
    ago
I hope that answers your questions adequately and I really hope you'll be able to help. Let me know if there is any more information you need. I should be much quicker to reply moving forward as I was away for most of last week and the beginning of this week.
Thank you,
Adam

Have just reinstalled Acrobat Pro XI and the Fit and shrink to page size options are not working - Any ideas?

When printing to a laser device my Acrobat Pro XI all of a sudden was not shrinking oversized pages to fit on paper. The Fit and Shrink to page options did not work. Could still output file reduced by using the percentage box but wondered if anyone else has encountered this problem before? Reinstalled Acrobat but problem still there.

I suddenly have started having this same problem. Anyone have an answer?

Key Board command Enter not working

Hello all,
I have a requierement
After a user has entered in the required search data, the user must click the search button to activate the search.
the search function should be enter enabled (user can use "enter" button on keyboard).
How can we achieve this in webdynpro view.

Hi Shilpi Agarwal,
                You can give the ONENTER action for your input fields where you enter the data and call the button event
                from that action as below.
method ONACTIONENTER .
data lr_event type ref to cl_wd_custom_event.
wd_this->onactionbuttonclick( " This method is the one created for your button click
wdevent = lr_event
   endmethod.

The bottom row of icons on my screen are frozen iPhone 4

I

Hi lynfromsydney,
The resource below will explain some steps to try if the touchscreen on your iPhone is unresponsive:
If the screen on your iPhone, iPad, or iPod touch doesn't respond to touch - Apple Support
https://support.apple.com/en-us/HT201406
Have a good weekend,
- Judy

Very sick Macbook Pro OS v 10.6.8 - initially running slow so I tried backing up to Time Machine and reloading the OS but the install disk failed. I was able to recover from the Time Machine back up but many applications are not working properly. Help!

I am also no longer able to back up using Time Machine (backups fail), can't access iPhoto (which was a problem before attempting to reload OS) and I suspect other apps are no longer working. The computer is however running faster in Safari and Mail...any suggestions would be greatly appreciated.

If there are any files you can transfer to a regular storage drive do that first and then disconenct all drives.
Hold c boot off the 10.6.8 disk and use Disk Utility to Erase with Zero option the hard drive, takes some time, let it complete as it's mapping off any bad or failing sectors.
Then install 10.6. log in and update to 10.6.8 (important!)
Now use Migration Assistant to transfer over just your user files, we need to rescue those first out of TimeMachine's EVIL clutches, once you've got that, transfer them to the regular storage drive and disconnect.
Note: if your 10.6 disk fails, call Apple for a replacement, you need the machine specific version, the 10.6.3 retial doesn't have iLife and only works for machines pre 10.6.3 release, not afterwards. Factory installed 10.6.4 machines and afterwards need machine specific disks.
Then either:
Log into the admin/first set up user on the machine and delete the Migrated user, then reboot and use Migration assistant again to TM everything this time
Or
Just install all your programs again from fresh sources.
If your TM drive is really hosed, then you'll need Data Rescue $99 to read the TM files directly and transfer the results to another regular storage drive (not the first one just in case), then pick through the debris and locate your files and transfer them to another drive.
I don't like TimeMachine, but for newbies it's better than nothing.
(I prefer cloning my entire OS X parititon instead, I can access it from any computer (Linux, Mac or PC) and I also can boot my Mac from it. I use Carbon Copy Cloner, but that's for later once your all better. )

The brightness button i.e. f2 and f3 are not working.

I tried everything I could but am not able to adjust the brightness of my laptop (i.e. HP 250 G2 Notebook). Please help me.
This question was solved.
View Solution.

Your model is not supported by HP for 32 bit operating systems.
See if these generic Intel drivers work...
Install this first and reboot.
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=20775&lang=eng
Install this second and reboot.
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23713
If this does not remedy the problem, you will have to install a supported operating system.

Keyboard keys are not working at startup

when i start my laptop the keys of keyboard are not working except the movement key and numeric enter key.
but when i turn of the narrator keys are starts working excepts some (such as: right control, function keys in some way,i.e.
wi-fi, volume,brightness & other are not working ) everytime.even it wake up from stand by mode.
function keys are work in genrel way i.e. F1 to F12.what can I do to resolve this.

hi ,
follow this steps please ,
1. Right click on My Computer Icon > Properties > Device manager (on the left side)
2. find the Keyboard > Right click on it > CHeck for updates
3. Make sure that you installed the right Driver for Your Keyboard proided from HP official website
if these didn't help
try using another OS (replace your Win version)
** for experts only : you can use UBUNTU live disk to check the Keyboard without uninstalling you win version
if changing the OS didn't help
now it's one of two things
1. there is a problem with your BIOS
2. there is a HW problem
and in both cases i don't recommend you to start solving it yourself
Updating the BIOS is very sesitive operation and also the HW problems
so please look for the nearest HP support center to your city
and make sure that they will solve your Problem
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Mark Th. Antonio
Faculty Of Engineering Alexandria University

The bottom row of my key board keys are not working

Similar Messages

Maybe you are looking for