The "Buck" Needs To Stop SOMEWHERE!!!

First off, I know that SCEA is an actual different company but when I expereince issues there I dont go 'ah, gosh darn it Sony Computer Entertainment Of AMerica"... I say "Frekanin Sony!!!"
Now this has to deal with a company that Sony allows branding rights to their gaming console. The problem IS NOT with the console but the support. It seems whenever there is a problem; the first thing done is for the PSN support staff to pass the buck (of responsibility) on anyone but themselves. So, I do what they tell me and call Activision, EA, or whatever company is also involved. Can you guess what they tell me?
They tell me to call SCEA, Sony, or PSN support becuase its not their problem and they cant do anything abou it!!! Then Im back with the Sony suport, or PSN, or whichever subsidiary product they send me back to.
THIS HAS GOT TO STOP!!! Its an embarrasment to me as a MULTIPLE Sony product owner. And yes, Iv already went to SCEA forum, Activision forums, EA, etc to say this same thing.
I beleive that none of these entities has ANY form of honor and respect for the name they ALL represent when I speak with them... SONY.
Please forward this problem to ALL and ANY staff who can dig into this and investigate these companies, who are only Sony by branding, and quit letting them ruin the BRAND NAME I choose to trust the most with my electronic needs thru their inability to take responsibility over the network and console using the good name of Sony! "$*!, *!@&, and *@#!$*&" (redacted explitive)
As regular joes, we deserve to have much better treatment for believing in Sony with our hard earned money!!!
Thank you and you can count on this also being faxed into several departments as Iv learned thats the only REAL way to get things happening... as with my Bravia.
Solved!
Go to Solution.

Thank you for your post.

Similar Messages

  • 2 blank page printing in the check need to stop it

    Hi,
    Can any one please give the solution to stop printing the second page in the form. When I'm trying to print the check in the development box  it is printing the check the but it also printing the second blank page which we dont want.
    Any help Reward points given.
    Thanks!

    Hello Venkata.
    There are 2 reasons for the second page to appear:
    1 - the main window doesn't fit the first page
    2 - you have a page-break control comand
    If it's the first option, you should verify the height of the MAIN window, and the size of the paragraphs you are writing. Verify if there is empty lines.
    If it's the second option, the solution it's very easy ... delete that comand.
    If you don't need a second page AT ALL, delete it from smartform (it's a check, so you don't need a second page).
    Best regards.
    Valter Oliveira.

  • I have multiple devices with the same cerificate, once I have a an exception for one, FF denys access to the others. I cannot change the certificates, I need to stop FF blocking them.

    I have multiple devices with the same cerificate, once I have an exception for one, FF denys access to the others. I cannot change the certificates, I need to stop FF blocking them.
    == This happened ==
    Every time Firefox opened
    == I attempt to access a web front end on an IBM SVC device

    You can't use the same certificate more than once.
    See also [[Certificate contains the same serial number as another certificate]]

  • So i was updating my ipod touch (4g) to ios 6 and i needed to stop it in the middle of updating. so i held the home button and the lock button. it turned white and i tried charging it when it died but it went back to usual please help!

    so i was updating my ipod touch (4g) to ios 6 and i needed to stop it in the middle of updating. so i held the home button and the lock button at the same time for it to restart. It started turning on with the apple symbol and then the screen went white. I kept trying to do the same thing but it wouldnt work. Eace time i did that the screen was a different color. I was yellow/white at one point, blue at another time and sometimes the color behind the apple symbol. It got really HOT and i just let it die. When it was dead i put it on a charger. once it got charged up it started turning on with the apple symbol. then it turned white again and then restarted without me touching anything. When it restarted it turned the blue again. i took it off the charger immediantly because i didnt want it getting as hot as it was before. ive tried every way i know how to fix it but not putting it in the computer because i dont want it to ruin the computer. Please help because i really dont want to get a new ipod. Ive read a lot about how to fix it here on apple but there all the same answer and it still doesnt work. Please respond ASAP! thank you! i could really use your help right now!

    First see if placing the iPod in Recovery Mode will allow a restore.
    Next try DFU mode and restore.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    If not successful then time for an appointment at the Genius Bar of an Apple store. You are not alone with this problem.

  • I have a 32 gb ipad air but need to get the songs stored in iTunes on my old iMac onto the ipad air or stored somewhere else. I have over 10000 songs on there which is 30.47 gb so far too much to put on my ipad air. How do I get them off my old iMac which

    I have a 32 gb ipad air but need to get the songs I have stored in iTunes on my old iMac onto the ipad air or stored somewhere else. I have over 10000 songs on there which is 30.47 gb. far too much to put on my ipad air. How do I get them off my old iMac which has no internet connection ? And where do I put them. Any help would be appreciated

    No I don't have another computer. I was thinking initially I would put them on my ipad but since I don't have enough gb maybe I can store them in some cloud thing? Sorry am a bit of a Luddite when it comes to all this. I just need to have them stored someplace and accessible to play when I need to. Thanks for your help.

  • Need to stop my cursor leaving the flash stage area in browser?

    Hi, I need to stop my cursor from moving on certain points on the stage. I'm using a magnifying glass effect but in the browser this only show the glass up to the stage so I need to stop it moving past those points. You can see what I mean if you move the magnify glass to the very left or right here:
    www.zoeglazebrook.co.uk
    this is the code I have for the magnify glass:
    var moveGlass:Number;
    magnifyingGlass.onPress = function() {
        moveGlass = setInterval(startGlass,1);
    function startGlass() {
        magnifyingGlass._x = _root._xmouse;
        magnifyingGlass._y = _root._ymouse;
    magnifyingGlass.onEnterFrame = function(){
         this.largeobject._x = (this._parent.original._x-this._x)*2;
         this.largeobject._y = (this._parent.original._y-this._y)*2;

    kglad wrote:
    var moveGlass:Number;
    magnifyingGlass.onPress = function() {
        moveGlass = setInterval(startGlass,1);
    function startGlass() {
    if(_root._xmouse>magnifyingGlass._width/2&&_root._ymouse>magnifyingGlass._height/2&&_root. _xmouse<Stage. width-magnifyingGlass._height/2){
        magnifyingGlass._x = _root._xmouse;
        magnifyingGlass._y = _root._ymouse;
    magnifyingGlass.onEnterFrame = function(){
         this.largeobject._x = (this._parent.original._x-this._x)*2;
         this.largeobject._y = (this._parent.original._y-this._y)*2;

  • My host name changes every few days, since Xmas adding a macbook its changed 6 times. Do I need to stop this? Does it cause problems with sharing between the iMac and macbook?

    my host name changes every few days, since Xmas adding a macbook its changed 6 times. Do I need to stop this? Does it cause problems with sharing between the iMac and macbook?

    There are several possible causes for this problem.
    1. Two (or more) computers on the local network have the same Bonjour name, such as "X's-MacBook-Pro.local".
    2. You have two simultaneous connections to the same local network: probably Ethernet and Wi-Fi. If applicable, disconnect the Ethernet cable or turn off Wi-Fi.
    3. A Mac wakes from sleep due to network traffic. This is due to a bug in OS X that may only affect some models.
    4. A device that gets its network address from the router wakes from sleep, and the address it was using before has been assigned to another device.
    5. A third-party wireless router has incompatible settings or firmware. In that case, refer to the manufacturer or ISP for support. Restarting the router may help, temporarily.
    6. See also this support article.
    Rename the computer in the Sharing preference pane.

  • Before the selector value reach a Case structure I need to stop it until a push button is pressed. How to do?

    Before the selector value reach a Case structure I need to stop it until a push button is pressed. How to do?

    altenbach wrote:
    UliB wrote:
    simply wire your selector value through a while loop. Stop the loop with your button. After the loop stops, the value will go on to the case structure.
    Hmmmm.....
    Hello altenbach,
    roflol .
    Thank you for the link to 'A Field Guide To LabVIEW Objects - Selfish Loop'. I'll keep that in mind, when answering other questions with while loops.
    Uli

  • HT201077 I need to stop photos from syncing to the ipod touch how

    How can I find the  menu where you can choose what sync's to the ipod touch?  I cannot find it with the "new" set up.  I need to stop the photos from my computer from moving to the ipod touch.

    in iTunes while your iPod is connected - http://support.apple.com/kb/HT1386?viewlocale=en_US&locale=en_US
    LN

  • I'm moderating a competition which will be about 8 hours long. I need to have a video/audio recording of the whole thing incase an answer is contested. We will need to stop recording and access the footage as the day progresses. Any suggestions?

    I'm moderating a competition which will be about 8 hours long. I need to have a video/audio recording of the whole thing in case an answer is contested.
    We will need to stop recording and access the footage as the day progresses. Any suggestions as to how best to accomplish this? I have an iPad and a Macbook Air.
    Many thanks!

    I'm moderating a competition which will be about 8 hours long. I need to have a video/audio recording of the whole thing in case an answer is contested.
    We will need to stop recording and access the footage as the day progresses. Any suggestions as to how best to accomplish this? I have an iPad and a Macbook Air.
    Many thanks!

  • Do I need to stop the dbTier or/and appsTier when ... ?

    Do I need to stop the dbTier or/and appsTier when I run
    perl adpreclone.pl dbTier
    perl adpreclone.pl appsTier
    or when I copy the Source System to the Target System (for the appsTier) ?
    Thanks,
    Paul

    Do I need to stop the dbTier or/and appsTier when I run
    perl adpreclone.pl dbTier
    perl adpreclone.pl appsTierThe database and the database listener should be up and running when you run the above two commands. For the application tier, you can keep it up or shut it down.
    or when I copy the Source System to the Target System (for the appsTier) ?It is recommended you shutdown the application services when you copy the application files. Some operating systems do not allow copying file while it is in use (like Windows).

  • HT1338 just bought a new I-Mac. At start up several updates were needed. The I-movie one stopped and shows an ERROR HAS Occurred. Howevr it does not allow me to update it again. In my purchases it shows as Installed with Error. What should I do?

    just bought a new I-Mac. At start up several updates were needed. The I-movie one stopped and shows an ERROR HAS Occurred. Howevr it does not allow me to update it again. In my purchases it shows as Installed with Error. What should I do?

    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Select "/var/log/install.log" from the file list on the left. If you don't see that list, select
    View ▹ Show Log List
    from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
    If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

  • How do you stop updates on apps once you have selected to update all?  I am limited on how much I can download daily and I need to STOP the updates

    I only have a limited amount to download daily and I need to stop the updates.

    Deletion of apps works as you describe EXCEPT in the case of apps that are pre-loaded as part of the iOS.  Apps that are part of the iOS cannot be deleted by the user.
    To free storage space, try removing unneeded videos, photos, music that take a very large amount of space.

  • When I click on a link, multiple(and by multiple, I mean a ton) blank tabs open. The only way to stop more blank tabs from opening is to close out of firefox completely. Do I have a virus or do I need to change my settings?

    If I click on something to open in a new tab or click on someone's email to open Outlook, instead of doing that, a bunch of blank tabs open. I'm fine with a couple blank tabs, but they keep opening. The only way to stop the tabs from opening is to close out of firefox entirely. When I try to reopen firefox, blank tabs again begin to reopen. You can't close out of them fast enough because they keep opening. To stop opening the blank tabs, you must restart firefox a second time.
    Is this a virus or something wrong with my firefox settings??

    Firefox includes options of how to handle different content types, in your case the mailto links are probably set to "Use Firefox". For details of how to fix this see [[Firefox keeps opening many tabs or windows]], in particular the section "Change the action for a content type".

  • When i try to load certain page, the system crashed and the bottom panel states " stopped" but when I close and open firefox again,it can't and I get this message that says my firefox is still running and to open the browser i need to restart the compu

    while browsing suddenly the system crashed and the bottom panel says " stopped".When closed and re-opened, I got a prompt that says firefox is still running and i have to close to open again or have to restart the computer but it doesn't work
    == This happened ==
    Every time Firefox opened
    == just happened

    You get message "firefox is still running" and computer restart doesn't help you. Try the advice below.
    Make sure Firefox isn't running (end firefox.exe process in Task Manager or restart computer)
    Find your profile folder
    C:\Documents and Settings\USERNAME\Application Data\Mozilla\Firefox\Profiles\xxxxxxxx.default
    find file "parent.lock" in it and delete it (the file is empty, its function is to signify to Firefox whether it's already open or not).
    Then try to open Firefox again. Will it start or not? What will it say?

Maybe you are looking for