The budget amount is not sufficient for release

Dear All,
Fund Management: Error. when posting budgeting document with transaction code  FMBB and FMBBC, I am getting error massage " The budget amount is not sufficient for release.
Message no. FMKU083
The budget amount is not sufficient for release
Diagnosis
The Eligible released budget is greater than the Eligible consumable budget for FM account assignment QPCP/Q001/QP-ADMINEXPENSES/QPIL.
Please note that the absolute value of the amount is specified. Even if the actual amount is negative, the comparison will always be made with the positive value.
Total released budget  = Release Budget to be posted by the current document +  Release Budget already in the Database.
Total budget  = Budget to be posted by the current document +  Budget already in the Database.
u2022     (Absolute) Total Eligible released budget  = 200,000.00
u2022     (Absolute) Total Eligible consumable budget  = 0.00
Important remark concerning the release on period:
The document to be created includes the amount on the period. But  the check  "Release against Budget" will nevertheless involve the amounts of the whole fiscal year.
Example:
Released budget on period 10 = 100
Budget on period 10 = 600
So, unreleased budget on period 10 = 500
But as:
Total Release Budget over the fiscal year =  980
and Total Budget  over the fiscal year =  1000
980 + 500 > 1000 so the release cannot be done. An error message FMKU083 is displayed and the values in the long text are:
(Absolute) Total released budget  = 1480
(Absolute) Total budget  = 1000
System Response
Processing stops. The error is displayed in the application log.
Procedure
There are two options for further processing:
u2022     You can post a further amount to be included in the Eligible budget.
u2022     You can decrease the amount of Eligible released budget to be posted.
Do the Needful,
hope for the best solution..
Regards,
LC..

Hi Waman Shirwaicar
I have applied the below Notes,
Note 1092634 Budget Release: error FMKU 083
Note 1328037 FMMPRELE: error FMKU083
Total released budget = Release Budget to be posted by the current document + Release Budget already in the Database.
Total budget = Budget to be posted by the current document + Budget already in the Database.
u2022     (Absolute) Total Eligible released budget = 200,000.00
u2022     (Absolute) Total Eligible consumable budget = 0.00
Important remark concerning the release on period:
The document to be created includes the amount on the period. But the check "Release against Budget" will nevertheless involve the amounts of the whole fiscal year.
but still getting the " The budget amount is not sufficient for release"
I have configured Control ledger "9H",  in settings for availability control ledger
and unable to do Configuration for "9I"   define fitter settings for budget values -->Define Consumable budget & Define budget values as consumed amounts.
error: FM budget value do not enter ledger "9I" as consumed amounts.
and the difference between Control ledgers "9H & 9I" need solution for configuration of Control Ledger "9I".
do the needful.
your early action highly solicited.
hope for the solution.
Regards,
Lucky Pandu.

Similar Messages

  • Error Message FF747  -The tax amount must not be greater than the tax base

    Hello,
    We are attempting to post an import vendor invoice through transaction    FB60 for Israel company code . Since the tax charged by the vendor is not fixed every time , we are entering the tax amount in the    FB60 screen manually , without selecting 'calculate tax'.The amount of tax is greater than the amount of expense as per the real business scenario. For example amount of expense is 100, amount of tax is 200 and the total amount charged by the vendor is 300 .However when we simulate the posting we get an error - The tax amount must not be greater than the tax base-Message no. FF747
    We tried putting a very high percentage in the tax code also but it didn't help
    We would like to go ahead with this posting. Could you pl throw light on the same . ? Is there any way (OSS note ) or a work around which can resolve the issue ?
    Best Regards
    Amit  Kulkarni

    Hello
    This may be  a work around in other cases , but since we want the amount to be updated in the BSET table for further VAT reports , we would like  this to be posted along with the expense item

  • Quantity contract not relevant for release

    Hi all,
    I am working on quantity contracts. After creating a contract, I'm trying to create a release order with reference to the contract. When I fill in the contract nr and the release partner Sap gives me the following message: contract 400****** is not relevant for release, authorization check.
    Any suggestions?
    Thx

    Hi,
    In order type VOV8, there is a filed Check partner authorization under Contract.
    If it is No check, then no need to give the customer number while you release the contract.
    Here you can specify whether the check is to be performed against the partners in the contract. If you do not want the check to be performed, leave the field blank.
    Regards
    M. Lakshmi Narasimhan

  • I am trying to download a free trial of photoshop for my macbook pro and it says there is an error and that the requirements for the new version is not supported for the mac I have. I have looked at the list of requirements but have no idea how to tell wh

    I am trying to download a free trial of photoshop for my macbook pro and it says there is an error and that the requirements for the new version is not supported for the mac I have. I have looked at the list of requirements but have no idea how to tell what I do and do not have?

    Apple Menu --> About this Mac.
    Mylenium

  • Issue when installing SQL Server Express 2012 - "The requested control is not valid for this service" + "Could not find the database engine startup handle"

    Good morning,
    I'm experiencing the following issue when installing Microsoft SQL Server Express 2012 (with tools, SQLEXPRWT_x86_ENU.exe) on the laptop of my company;
    Installation goes plain until around the end of the progress bar, it stops on the setup of
    SqlEngineDBStartConfigAction_install_configrc_Cpu32
    giving 7-8 times, even pressing "Cancel", the message "The requested control is not valid for this service";
    After this, I receive one last message ""Could not find the database engine startup handle", then installation ends with failures, in particular the Database Engine and the Server Replication failed to be installed.
    I've put in my SkyDrive the error log I received after the install;
    I'm at full disposal if you need further information,
    thank you in advance
    Best regards
    Francesco

    Well, i just ran into this issue and the problem was lack of admin rights. It was my company's laptop so got the setup initiated by my company's IT team with admin rights. However, the upon completion of setup, i go the same error messages as stated above: 
    SqlEngineDBStartConfigAction_install_configrc_Cpu32
    giving 7-8 times, even pressing "Cancel", the message "The requested control is not valid for this service";
    After this, I receive one last message ""Could not find the database engine startup handle", then installation ends with failures, in particular the Database Engine and the Server Replication failed to be installed.
    Also, if you open SQL Server Configuration, the status of the service is "Change Pending" and you would not be able to set the startup login type to Local Service/System/Network.
    Then, I just got my account added as Local Admin and then tried to start the service and was able to.
    However, I am not sure whether same was the case for you.
    Please mark the answer as helpful if i have answered your query. Thanks and Regards, Kartar Rana

  • Error "The serial number is not valid for this product" | Creative Suite

    HI together,
    I'm very annoyed about the fact that I payed for Adobe Creative Suite Production Premium 5 (EDU version) and now I'm not able to use it on my new Mac. The Support team (Chat) from Adobe told me several times that the product/serial or whatever was canceled but this doesn't help me to get the product working and I won't pay again for this software. So what's the reason for cancellation? I can't see reasons for this and I don't understand why Support team can't help me. Already found Error "The serial number is not valid for this product" | Creative Suite but this doesn't helped me.
    Regards
    René

    Maybe this is also useful... They told me I canceld this by myself which is not the truth. I had a Windows machine and used Creative Cloud as well but I only canceld the Cloud, not my Serial Number for Production Premium...
    So who is able to reactivate my Serial Number so that I'm able to use my product?
    info: Thank you for your patience.
    While you wait, you can try our community forums where experts are available 24 hours a day, 7 days a week.
      info:  We are still assisting other customers, thank you for your patience. You can also try our community forums, available 24 hours a day, 7 days a week.
      info:  We are still assisting other customers, thank you for your patience. You can also try our community forums, available 24 hours a day, 7 days a week.
      info:  We are still assisting other customers, thank you for your patience. You can also try our community forums, available 24 hours a day, 7 days a week.
      info:  We are still assisting other customers, thank you for your patience. You can also try our community forums, available 24 hours a day, 7 days a week.
      info:  We are still assisting other customers, thank you for your patience. You can also try our community forums, available 24 hours a day, 7 days a week.
      info:  We are still assisting other customers, thank you for your patience. You can also try our community forums, available 24 hours a day, 7 days a week.
      info: You are now chatting with Richa.
      Richa: Hello! Welcome to Adobe Customer Service.
      Richa: Sorry for any inconvenience this has caused
      Richa: May I get the serial number?
      Richa: Are we still connected?
      Richa: We have not heard from you for some time.  Do you wish to continue to chat?
      Richa: Are we still connected?
      Rene Pardon: hi
      Rene Pardon: for sure
      Rene Pardon: sorry, i took so much time for your answer that i decided to do anything else at this time
      Rene Pardon: <Deleted >
      Rene Pardon: i registered for the education version of production premium 5
      info: Your chat transcript will be sent to r*@*.de at the end of your chat.
      Richa: ok let me check
      Richa: please wait
      Richa: Thanks for your patinece
      Rene Pardon: do you also need my "authorization code" for this product?
      Richa: I need to transfer the chat to
      Richa: tech rteam
      Richa: please wait
      Rene Pardon: ok
      Richa: I am sorry
      Richa: But I will not be able to transfer the chat
      Rene Pardon: is there a phone number i can call?
      Richa: As the serial number is canceldd
      Richa: and we do apologise
      Rene Pardon: why was it canceled?
      Richa: but there is no phone support for this product
      Rene Pardon: i don't understand because i payed a lot for this
      Richa: Its showing canceled
      Rene Pardon: so what are the options?
      Rene Pardon: i need this product right now and i payed for it so why can't i use it?
      Rene Pardon: Your file '2015-03-30_Personalausweis_*.pdf' was successfully uploaded.
      Rene Pardon: as you can see, i'm the person who payed for this software
      Richa: I am sorry I just checked it
      Richa: it is canceled thats why you are getting invalid error
      Rene Pardon: yeah, that's what i see but i dont understan. why was it canceled? who is responsible for this mistake? it doesn't help me to tell me what i already see i need a solution to use the product
      Richa: I am sorry Rene
      Richa: But its showing canceld
      Richa: so cant help you with that
      Richa: I wish I could help you, but my hands are tied
      Rene Pardon: that's what you told me several times so who can help me?
      Rene Pardon: i'm very annoyed about this fact that i can't use the software i payed for and noone is able to help me getting this working
      Rene Pardon: so please tell me who is able to help me
      Richa: You need to place a new order?
      Rene Pardon: no, i won't pay AGAIN for this software i want a solution to use my already payed product
      Rene Pardon: please get someone in your team who can help me
      Richa: I am sorry Rene..
      Richa: But unfortunately my team can not help you on this.. as the sersil is expired
      Richa: I mean canceled
      Richa: Sorry but we can not help Rene..
      Rene Pardon: BUT WHY CAN'T YOU TELL ME WHY IT WAS CANCELED?
      Rene Pardon: Help me understanding...
      Rene Pardon: You're wasting my time!
      Richa: I am sorry
      Richa: I found the reason for cacnellation
      Richa: and its canceldd
      Richa: because you requested to cancel.  in year 2013
      Richa: On 30th april 2013
      Rene Pardon: but i only canceled the creative cloud, not my creative suite
      Richa: so we have refund and canceled it
      Richa: Its showing for this oserial?
      Rene Pardon: one moment
      Rene Pardon: i log into my account
      Rene Pardon: Your file 'Bildschirmfoto 2015-04-09 um 13.31.53.png' was successfully uploaded.
      Rene Pardon: As you can see the product is displayed as "non-canceled"
      Rene Pardon: I also bought the Createive Cloud during my time I had a Windows machine and this was the one i canceled - or I expected only this to get canceled
      Richa: I am sorry but the refund was given and requested for this
      Rene Pardon: There was only a refund for the Creative Cloud but not for the Creative Suite i bought
      Rene Pardon: And why should I need a serial number for the Creative Cloud?
      Rene Pardon: Please reactivate my Serial Number so that I'm able to use my product
      Richa: I can not do that?
      Rene Pardon: But i guess someone in your Team can
    Richa: can not help you

  • The method getBean() is not valid for metadata object /ex/model/remittance/client/common/bc4j.xcfg

    Hi,
    I am getting bellow error when i am running my application. I am using JDeveloper 11.1.2.3
    <Nov 6, 2013 9:52:57 AM AST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
    <Nov 6, 2013 9:52:57 AM AST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
    <BC4JConfigLifeCycleCallBack> <contextInitialized> MDS-01702: The method getBean() is not valid for metadata object /ex/model/remittance/client/common/bc4j.xcfg - it is allowed on only bean metadata objects.
    oracle.mds.exception.MDSRuntimeException: MDS-01702: The method getBean() is not valid for metadata object /ex/model/remittance/client/common/bc4j.xcfg - it is allowed on only bean metadata objects.
      at oracle.mds.core.MetadataObject.getBean(MetadataObject.java:327)
      at oracle.adf.share.jndi.MDSBackingStore.getMOBean(MDSBackingStore.java:558)
      at oracle.bc4j.mbean.RuntimeMXBeanImpl.init(RuntimeMXBeanImpl.java:120)
      at oracle.bc4j.mbean.RuntimeMXBeanImpl.<init>(RuntimeMXBeanImpl.java:110)
      at oracle.bc4j.mbean.RuntimeMXBeanImpl.<init>(RuntimeMXBeanImpl.java:101)
      at oracle.bc4j.mbean.BC4JConfigLifeCycleCallBack.contextInitialized(BC4JConfigLifeCycleCallBack.java:114)
      at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:481)
      at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
      at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
      at weblogic.servlet.internal.EventsManager.notifyContextCreatedEvent(EventsManager.java:181)
      at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1872)
      at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3153)
      at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1508)
      at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)
      at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
      at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
      at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
      at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
      at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
      at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
      at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
      at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
      at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
      at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:636)
      at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
      at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:205)
      at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
      at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
      at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
      at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
      at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
      at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
      at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
      at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
      at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
      at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
      at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
      at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
      at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
      at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
      at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
      at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    <Nov 6, 2013 9:53:11 AM AST> <Notice> <LoggingService> <BEA-320400> <The log file C:\Users\maroof\AppData\Roaming\JDeveloper\system11.1.2.3.39.62.76.1\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log will be rotated. Reop
    I seen oracle docs solution
    MDS-01702: The method getBean() is not valid for metadata object {0} - it is allowed on only bean metadata objects.
    Cause: An attempt was made to access the metadata object using the bean API but the metadata object was not a bean metadata object. The schema for the root element may not have been registered with MDS, or the beans were not available on the classpath.
    Action: Regenerate the beans from the schema definitions and ensure that the correct versions are on the classpath. Check that the schemas are registered with the MDS instance.
    Level: 1
    Type: ERROR
    Impact: Configuration
    But i am not getting what i do in my application for removing this error.
    Maroof

    Do you use MDS in your application?
    It's possible that you see a leftover of an earlier deployment.
    Do you get the same error if you only start the integrated server (application server navigator->integrated server->debug or run)?
    IF you don't get it when you only start the server without running your application, the problem is somewhere in your app. If you get the error it's probably an old deployment or a configuration error of your server. In this case stop jdev, rename the DefaultDomain folder C:\Users\maroof\AppData\Roaming\JDeveloper\system11.1.2.3.39.62.76.1\DefaultDomain tp C:\Users\maroof\AppData\Roaming\JDeveloper\system11.1.2.3.39.62.76.1\xxxDefaultDomain and start jdev again. Then use hte application server navigator to create a new integrated server (you should see this option as the DefaultDomain folder is not present) and once the new integrated server is created test again.
    Timo

  • SPA3000 F/W 3.1.20(GW) last digit repetition within the dial plan is not working for gateway 0-4

    H/W: SPA3000
    F/W: 3.1.20(GW)
    Problem: The last digit repetition within the dial plan is not working for gateway 0-4.
    Line 1 Dial Plan: (****|<#,xx.<:@gw1>|1747xxxxxxxx.<:@gw1>)
    Dial "17474743246#" which works for gw1.
    Dial "#17474743246" which also works for gw1.
    Dial "17474743246" which doesn't work and actually goes through VoIP 1 but not gw1.
    It results in I have to specify a fixed number of digits for gw0-gw4 in the dial plan or it won't works. This could be very difficult for international calls.
    Is there any way to specify Interdigit Short Timer with <:@gw0>?
    BTW, it's strange that I have to include (****) in the dial plan to enter IVR. Without it I can't even hear any sound coming from gw1 (SIPphone). Maybe the SPA needs a factory reset. The test dial plan might look like,
    S:4,(****|*xxx.|[2-9]|xxxxx|*0<:@gw1>|1747xxxxxxx<:@gw1>|1408xxxxxxx<:@gw0>|xxxxxxxxxxxxxxxxxxxx.!)
    The last barring sequence "xxxxxxxxxxxxxxxxxxxx!" is to make sure the Interdigit Short Timer works after the last digit dialed otherwise the number will be transmitted immediately which is not preferred.

    IMHO , if there's a need for you to include *** on the dial plan to enter the IVR menu there might be a need to reset the unit.
    I believe that you can set the interdigit timer by including that on the dial plan ie: xxxxS0 just like on a hotline, i just never had a chance to try including that syntax when invoking gw0 on the dial plan , but i guess you may give it a try.

  • Iphone 5 I do not go out or do not appear in upgrede AirPlay for ios 7.0.4 safari browser is not smooth and too long kept out the phrase "safari can not search for too many repetitions search"

    iphone 5 I do not go out or do not appear in upgrede AirPlay for ios 7.0.4 safari browser is not smooth and too long kept out the phrase "safari can not search for too many repetitions search"

    AphexTwin wrote:
    - no Apple input?
    Of course not.  Didn't you bother to read the TOU of this forum?  This is a USER TO USER technical support forum.  Apple doesn't post here.

  • The requested action is not supported for this object. [message 131-171]

    Hi,
    One user is having the below error message appear when she attempts to print remittances. This has only started happening since yesterday and all other documents are still printing.
    "The requested action is not supported for this object. [message 131-171]"
    Any ideas what could be the problem?
    Regards,
    Mohan

    Hi Johnson,
    I have not tried your suggestion till now as I am waiting for the database copy from my client.
    Just a quick question, As I already mentioned earlier and I also keep getting the issues from the users reporting that the user's get this error only if they print 'remittance advise reports' has multiple invoices.
    The report prints fine if it has single invoice even if it is a check payment.
    Will your suggestions address this as well?
    Regards,
    Mohan

  • The connection was denied because the user account is not authorized for remote login

    Using Terminal Server 2008 not able to get non administrator users to login to the remote desktop. Have tried from Windows server 2008 and from Windows servers 2003. Get error login in "The connection was denied because the user account is not authorized for remote login" from Windows Server 2008. Error "The requested session access is denied" from Windows Server 2000.

    Is that seriously the only way to do this? Doesn't this render the "Allow log on through Terminal Services" GP Setting useless?
    I would like to know this answer, as well.  I have created a new AD group for my assistant admins called "Domain Admins (limited)".  I have added this group to the GP setting "Allow log on through Terminal Services", but the
    assistant admins cannot log in through RDP.  It 'feels like' this is all I would need to do.
    Craig
    Found some good info
    here. There are really two things required for a user to connect to a server via RDP. You can configure one of them via Group Policy but not the other.
    1) Allow log on through Terminal Services can be configured through Group Policy, no problem.
    2) Permissions on the RDP-listener must also be granted.  If your user is a member of the local Administrators group or the local Remote Desktop Users group then this is handled.  If you are trying to utilize a new, custom group (as I am),
    then there isn't a way to do this via group policy (that I have found).
    EDIT: Found the answer.  I am creating a blog post to outline the steps.  They aren't hard, but they're not self-explanatory.  It deals with the Restricted Groups mentioned above, but it's still automate-able using Group Policy so that you
    don't have to touch each computer.  I think the above poster (Andrey Ganev) got it right, but
    I had trouble deciphering his instructions.
    Here is my blog post that walks through this entire process, step-by-step.

  • The value 1 is not allowed for the field variace key

    Hi experts,
               When i was creating material master i was getting the status message as "the value 1 is not allowed for the field variance key" , but its stopping there its not moving out of that screen and creating the material record. When i see this field in the material master configuration its an optional field. Can you give me suggestions, where it can go wrong.
    Thanks & Regards,
    Ravi.

    Hi
    Can u tell me the field name . I cant get that field ref key. In which view does it come.
    Reg
    Raja

  • The tax amount must not be greater than the tax base

    Hi Experts,
    User is trying to "Relase to Account" in t-code VF01 he is getting an error message The tax amount must not be greater than the tax base.
    During Debuging i found the error is raised in Function module      RV_ACCOUNTING_DOCUMENT_CREATE
    Message raised is
    Message Class : FF
    Message number: 747
    Mesage "The tax amount must not be greater than the tax base"
    Request to through some lights on this issue.
    Reagrds
    Sree

    Hi,
    did you check SAPNET notes with "VF01" and the message class/number as search terms. There are some notes dealing with this case eg 872449, and 184985.
    Best regards, Christian

  • I'm trying to reinstall photoshop CS5 in a new laptop but i have an "The serial number is not valid for this product" error

    I'm trying to reinstall photoshop CS5 in a new laptop (pc) but i have an "The serial number is not valid for this product" error.
    I have deactivated photoshop in the old computer.
    The old laptop have photoshop installed with the DVD but the new laptop don't have DVD so i downloaded cs5 from Download CS5 products. ¿Maybe doing this is an error?

    the installation files work the same whether from a  disc or download, but there are other ways to mismatch a serial and installer.
    Error "The serial number is not valid for this product" | Creative Suite

  • When i try to install my newly bought CS5 it says"The serial number is not valid for this produkt" what to do???

    When i try to install my newly bought CS5 it says"The serial number is not valid for this produkt" what to do???
    / Jojja

    Oh my, I hope so too but its pretty common on these types of sites - even eBay sellers do it. Its all about the way they word it. Some sellers are very crafty in the way they word their ads misleading the buyer into thinking they're getting a legitimate and licensed product when it's actually not. Be careful in any future products you buy on these kinds of sites.
    My advice is to quickly write an email to the seller and demand to know what you just bought - Be VERY specific and thorough with your questions - for example on ebay  I bought a computer that had CS5 installed on it (but it didn't come with the install disks)  This particular seller installed CS5 or 6 as well as the Microsoft Suites on all of his used pc's. So before I bid, I sent an email to him asking if it included the product codes for the CS5 because I intended to register it for Adobe support. He advised me that he bought bulk licenses for all his software, he told me exactly where the product codes were on a document and they were in fact legit.
    Also check the return policy of the Site (not the seller) sometimes they offer a little protection to their customers. Be sure to contact their support department and their Fraud department if it turns out you were scammed. And definitely give negative feedback to the seller.
    One more thing, you should  also check with the Adobe licensing support department. In fact, do this FIRST - so that you're sure the code is no good. Sometimes the product codes have expiration dates (though I've never heard of it happening to entire suite) If this is the case they will issue you a new code free of charge.
    Good Luck. I really hope it all works out for you.

Maybe you are looking for

  • Have to "Set up Bluetooth Device" for wireless trackpad and keyboard almost every day

    Almost every day when I turn on my MacBook Air in my home office, my Apple wireless keyboard and trackpad do not automatically reconnect. They used to connect just fine when I was in the viscinity, but now (for the past 6 months or so) I almost alway

  • How do I get my anote data back

    I lost my Awesome App with all my data from my IPhone

  • Alv data upload and delete in database table

    hi .    i have done data save in date base but not update and delete..writen this code.. form save_data.   CALL METHOD cont_editalvgd->check_changed_data.   IF lt_display EQ it_city.     MESSAGE s002(00) WITH 'No data changed'.   ELSE.     CLEAR: gd_

  • File Content Conversion ( avoid fields in conversion)

    Hi all                     An IDoc to File scenario , I am doing file content conversion in receiver File adapter. my message type for file  2 HEADER each having its own substructure Like    1header                    fieldA                         

  • Fill-in PDF forms and save with no error messages. How?

    I've saved a Reader Extended PDF enabling form fill-in and save, but users report error saying, "WITHOUT THE OWNER PASSWORD YOU DO NOT HAVE PERMISSION TO SAVE THIS DOCUMENT." What do I need to do enable them to fill-in and save with no errors?