The built in dictionaries I had downloaded before won't load after the ios8 update.

When I had tried to define a word through the built in dictionaries on my iPad, nothing appeared as a definition. I went to the manage option to see if I needed to download the dictionaries again, but the dictionaries that I've already installed had these circles on the right that refused to fill up... i.e. They wouldn't load. I've tried downloading the other dictionaries I hadn't downloaded before to see if it was the overall downloading proble but nope, those download hella fine so... Help??????

They'll be more updates. Try the rese belowt and if that doesn't work be sure to leave feedback to Apple.
Press and hold both the home and power buttons 10-15 seconds till the Apple logo appears. Release both buttons. Wait 15-20 seconds till your iPad starts on it's own.
http://www.apple.com/feedback/

Similar Messages

  • Iphoto won't load after the Mac 10.8.02

    keeps saying fix and I fix and then it says fix and I fix and it closes then tells me to fix.............AGH!!!!!!

    You realise that we can't see your machine and haven't a clue what you're talking about, right? You need to explain what the problem is. It also helps if you tell us the version of iPhoto you have and any error messages you get.

  • I had downloaded and installed one of those automatic Windows update and now whenever I try to open my Firefox I get an error message, "Platform version 6.0.2 is not compatible with minVersion 6.0.1 maxVersion 6.0.1

    I had downloaded and installed one of those automatic Windows update and now whenever I try to open my Firefox I get an error message, "Platform version 6.0.2 is not compatible with minVersion >6.0.1 maxVersion <6.0.1

    If you use ZoneAlarm Extreme Security then try to disable Virtualization.
    Do a clean reinstall and delete the Firefox program folder.
    * http://kb.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update
    *[[/questions/869812]]
    *[[/questions/869951]]

  • HT201413 I purchased an album online with my ipad2 directly from the artists website.  I received an email containing the link to allow me to download it.  I tapped on the link and the MSG came up saying Safari is unable to download file.  Any ideas?

    I purchased an album online with my ipad2 directly from the artists website.  I received an email containing the link to allow me to download it.  I tapped on the link and the MSG came up saying Safari is unable to download file.  I have downloaded apps before with no problems.  This is the first music download I have purchased on my ipad2.  Maybe it has something to do with the security on the email I received from the artist containing the download.  I have the latest iTunes OS and apple iPad 2. O.S.  Any ideas on what to do?

    You can't download music via Safari on the iPad - you will need to download it on your computer, add it to your computer's iTunes, and then sync it to the iPad.

  • Hi have just purchased iphone 4s . my itunes on my mac is currently 10.4 . 10.5 is needed for the new iphone but when i download it and click on install the itunes about still says 10.4 . have tried to update through itunes but it says there is no softwar

    hi have just purchased iphone 4s . my itunes on my mac is currently 10.4 . 10.5 is needed for the new iphone but when i download it and click on install the itunes about still says 10.4 . have tried to update through itunes but it says there is no software available for me . please help . mr frustrated

    If your computer is running an OS X prior to Snow Leopard 10.6,
    the answer (if it is an Intel-based Mac; not old PowerPC model)
    would be to buy the retail Snow Leopard 10.6 DVD from Apple
    for about $20, and install it. Then update that to 10.6.8 by using
    the installed Snow Leopard online to get Combo Update v1.1 for
    Snow Leopard 10.6.8. After that is installed & updated, run the
    system's Software Update again, to see what else is available to
    that system.
    Later systems can then be looked into at Mac App Store, once
    the computer is running Snow Leopard 10.6.8.
    And if your computer is a Power PC (G4/G5, etc) and has no
    Core2Duo kind of CPU -- See "About this Mac" in apple menu
    to disclose the general info about your Mac. Also you can see
    even more by clicking on "More Info" when looking in there...
    If it isn't an Intel-based Mac, it can't run a system past 10.5.8.
    Hopefully this helps.
    Good luck & happy computing!

  • I had to reset my IPhone 5 after the new IOS update because I was not getting phone calls. Now I no longer have the microphone on my keyboard for emails or text messages. Any suggestions on where to go to fix this?

    I had to reset my IPhone 5 after the new IOS 7.2 update because phone calls were not coming through. Now I no longer have the microsphone on the bottom of my key pad to do voice texts.

    Can any one tell me how to put it back on there?

  • My macbook won't let me download the new version of itunes and my ipod won't sync without the new version of itunes

    My macbook won't let me download the new version of itunes and my ipod won't sync without the new version of itunes. Please help!!!

    Are you running Snow Leopard or later?
    Upgrading to Snow Leopard
    You must purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
         Snow Leopard General Requirements
           1. Mac computer with an Intel processor
           2. 1GB of memory
           3. 5GB of available disk space
           4. DVD drive for installation
           5. Some features require a compatible Internet service provider;
               fees may apply.
           6. Some features require Apple’s MobileMe service; fees and
               terms apply.

  • I had a hard disc failure and had to reload Design suite 6 from disc.  The program is now telling me I have 7 days to register the product or it will quit working.  The serial number is already registered.  It won't connect to the adobe site from the popu

    I had a hard disc failure and had to reload Design suite 6 from disc.  The program is now telling me I have 7 days to register the product or it will quit working.  The serial number is already registered.  It won't connect to the adobe site from the popup screen that comes up telling me I only have 7 days to register.  What do I do?

    Go to the Help menu in Photoshop and choose Activate. It should open a wizard allowing you to do this.
    If that fails, Contact Customer Care after clicking on one of the activation links. The more information you give them, the easier it will be for them to help you.
    Gene

  • I've downloaded and installed Lightroom 6. The icon is on my desktop, but it won't open. The older version is still there also, and it works like normal.

    I've downloaded and installed Lightroom 6. The icon is on my desktop, but it won't open. The older version is still there also, and it works like normal. How do I fix this.

    Hi Alian,
    Please try to follow the steps given in the article.
    http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
    Regards,
    Sumit Singh

  • HT6114 I tried to download this to my macbook but when I click on it in the app "purchases" section, it says download but won't allow me to download it. Why?

    I tried to download this to my macbook but when I click on it in the app "purchases" section, it says download but won't allow me to download it. Why?

    What is it exactly that you're trying to download?
    Do you have the URL we can check for you?

  • Library Update rqstd on Aperture 3.2; now won't open get msg "error opening data base for the library "~/Pictures/Aperture Library.aplibrary"   TIme machine won't load backup "error code -8003"

    Aperture working on OS 10.6.8 then Library Update rqstd on Aperture 3.2; said yes;
    now Aperture won't open,  get msg "error opening data base for the library "~/Pictures/Aperture Library.aplibrary"  
    TIme machine won't load backup "error code -8003"
    Tried reloading Aperture 3.2 but get same result.

    You’re running an outdated copy of Safari on your Desktop. That won’t work.
    In the Finder, select
    Go ▹ Applications
    from the menu bar, or press the key combination shift-command-A to open the Applications folder. Check that the Safari application is in that folder. If it is, use it, and delete the copy on your Desktop. Never move or copy built-in applications.
    If you've deleted Safari from the Applications folder, back up all data, then reinstall OS X. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.

  • IMac makes a loud beep on start up, won't load past the blue screen and the black ticking dial appears every few seconds in centre of screen.

    Urgent help!
    Out of the blue my mac lost the mouse cursor even though it had connection so I rebooted only for the mac to make a loud beep on start up then get stuck at the blue loading screen. It won't load past the blue screen. I've tried to reboot holding down the shift key but no change. I've also shut down, unplugged the main for 15 seconds, re plug and wait 5 seconds before starting up again but no change. Does anyone have any suggestions?
    PS: I'm not too sure which systems I am running without being able to check in about this mac. I bought my imac in January or February 2011 if that helps.

    The power on self-test resides in the ROM of the computer. This test runs whenever the computer is turned on after being fully shut down (the power-on self-test does not run if the computer is only restarted).
    If a fault is detected during the test, you will not hear a normal startup chime. Instead, the system will beep as explained below. If you experience one of these beeps, you may call your Apple Authorized Service Provider for additional troubleshooting assistance.
    1 beep = no RAM installed
    2 beeps = incompatible RAM types
    3 beeps = no good banks
    4 beeps = no good boot images in the boot ROM (and/or bad sys config block)
    5 beeps = processor is not usable
    http://support.apple.com/kb/HT1547

  • My computer won't load pass the grey start up screen

        MacBook pro won't load pass the grey start up screen?

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    Step 1
    The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.   
    There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
         a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
    b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    Sometimes a boot failure can be resolved by resetting the NVRAM.
    Step 3
    If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
    Step 4
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
    Step 5
    Boot in safe mode. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 5.
    If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
    If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 6
    Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
    Step 7
    Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 8
    Repeat Step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
    Step 9
    This step applies only to older Macs (not current models) that have a logic-board ("PRAM") battery. Both desktop and portable Macs used to have such a battery. The logic-board battery is separate from the main battery of a portable. A dead logic-board battery can cause a boot failure. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
    Step 10
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested. If you can't get to an Apple Store, go to another authorized service provider.

  • My laptop won't load past the main blue screen

    Hi, I went to restore my laptop to a previous point, it did the usual things, it switched it's self off to then restart again but won't load past the main blue windows 7 home premium page, it it keeps flickering as well, I've tried switching on and off and taking the battery out, nothing works, never had this happen before :-S

    Hello again, sorry that the steps that I we have attempted have not resolved the issue. I have a tool that you can try. It's called the HP Support Assistant. If you have any computer issues, the Support Assistant will find them and give you solutions to the issues or resolve them for you. Please click on the link that I have provided.   http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-110990-1&cc=us&dlc=en&lc=en...
    Thanks again.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • When I try to connect to a link I receive the message "Search bookmarks and history" and FF won't connect to the link requested

    When I try to connect to a link I receive the message "Search bookmarks and history" and FF won't connect to the link requested. VER FF 3.6.6. Windows7; 64 bit.

    I have currently FF 3.6.8 running under Windows XP 32 bit. I am using Multiproxy Switch ver 1.33 add-on to switch between multiple proxies.
    My FF starting page is http://www.google.com/ncr . When I start Firefox and the actually configured proxy is unreachable, I get the usual message that the page cannot be opened ("Try again"). Then I switch to another proxy or to direct connection. Normally the desired page (google) opens. But in case I switch the proxy before the error message appears, this grayed message "Search Bookmarks and History" appears instead of the URL in the URL input field and I have to retype the URL.
    Remark: I would really like to have this function "Searching Bookmarks and History" available in Firefox, because I often do this kind of search and need 4 clicks to get there (Bookmarks-Organize Bookmarks-Bookmarks Menu-and then input my search criteria).

Maybe you are looking for