The built in feedback addon doesn't work.
I was attempting to provide feedback about significant lag while switching tabs (4.0b6 on Fedora 13). However, once I'd added my comment and attempt to submit it, I recieved the following error message:
Forbidden (403)
CSRF verification failed. Request aborted.
More information is available with DEBUG=True.
If you are able to connect without VPN, open this and report this issue, under description briefly explain about your VPN setup like what software or program are you using.
Similar Messages
-
Pages load fine. When scrolling down, the video tears and becomes completely illegible. Refreshing the page fixes it until I scroll down further. Also, the built-in feedback page won't let me submit once I've filled it out. I had none of these problems with FF4 Betas 10-up, until RC1. And it's bad enough to make FF unusable. I've upgraded my video driver; no help. Any suggestions?
I have downloaded several Music videos and TV shows, they will not display on my ITunes on my PC. They work fine on my IPod, but they won't play on my PC windows XP. The audio works fine, but not the video. Does anyone have an answer?
-
Getting rpm values from the fans on the MSI NEO2-FIR motherboard doesn't work
I currently have 6 Noctua NF-S12-1200 120mm fans spinning in my computer but i am unable to get rpm values from them except the cpu-fan. It doesn't work to get a readout from the others with either, BIOS, Dual Core Center or Speedfan. Regarding Speedfan is it true it don't support the SuperIO Chip on the Neo2, the FINTEK F71882F? It's not currently listed in their supported temperature sensors list.
So whats the problem? Shouldn't atleast DualCore Center atleast show the rpm's from the other chassis fans?
Or the fans don't support sensor readings?
Thanks!Quote from: Jack on 13-October-10, 00:15:36
Well, there is nothing that can be done about. SysFAN 1 & 4 support sensor readings, #2,#3 and #5 don't. You can also see that in BIOS Setup. #1 are the only ones that show up there (H/W Monitor section). This is not a malfunction or a bug. You have to live with no fan sensor readings or be creative about the wiring.
The problem is that i use the UNLA cables from Noctua which half the speed of the NF-S12 fans i run with. And it blocks the rpm readouts in Speedfan and BIOS.
http://www.noctua.at/main.php?show=productview&products_id=5&lng=en
Strange thing is that the CPU fan reads fine with the ULNA cable attached but the SYSFANS will not read the rpm with the ULNA cables.
What is wrong? -
I am from Brazil, and i have an iphone 5. Since it was purchased the 3G/4G data signal doesn't work. I made contact with people in Apple from Brazil and they told me I had to ask for your support to unlock the 3G/4G data signal. How do I have to proceed to unlock this feature in my iphone?
I would appreciate if you can help me.
Thanks!Greetings alex.bonifacio! I'm very sorry that you're having connection problems with your iPhone 5. While would love to help in any way I can, the device must at least be on an active line of service with Verizon Wireless in order for me to be able to make any changes. I must therefore urge you to contact your local wireless carrier for your equipment options. Good luck and thanks!
DionM_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!! -
Hello everybody,
I would like to copy all the songs from one Ipod into another. All the songs are into my Itunes account, I tried to drag and drop the songs from the old Ipod to the new one but it doesn't work. Is there a way to do it ?
I share one Itunes account with other people from my family and one person would like to keep the same songs on the new Ipod as the ones which were on the old one.
Thanks in advance for your answer.
YanHello Chris,
Thanks for your answer. I was hoping for an easier answer. Too bad there is no drag and drop solution, it would have been much easier.
Thanks for answering so fast.
Bye.
Yan -
How do i copy content from one hard rive to another through my macbook air? the copy and paste option doesn't work
It's because of the extension of the hard drive is a Windows extension ( most likely MSDOS or Ex-FAT), meaning you can only read but not write. If there are no important files (or you can copy the whole thing to your computer/mac) you can just reformat the hard drive and change the extension to NTFS (readable and writable on both windows and mac) or Mac OS Extended (readable and writable on Mac, readable on windows).
Go to DISK UTILITY
Choose the Hard Disk you intended
ERASE
You can choose either
(I personally prefer this one, you know just in case) -
My new iPad air is asking for a pass code. I have only just finished restoring it via iTunes from my ipad2 and I didn't set one. The one I used before doesn't work. What can I do?
http://support.apple.com/kb/HT1212
-
The geo-fence in Reminders doesn't work on my 4S since ios7.
The geo-fence in Reminders doesn't work on my 4S since ios7. Any reminders I put in as remind me at a location do not work. Location services are turned on. Maps work fine & show my location. Reminders are turned on in location services & I see the symbol for the geo-fence in settings, but not at the top of my home screen. This always worked fine with ios6.
Try swiping down with two fingers. This solved my problem.
-
I´d like to export my iphotos "macbook pro". Everything worked fine when I installed impression for iphoto but when I installed impression 2 now I can´t export my photos. I´ve restarted the computer but still it doesn´t work.
Please can sombody help me with that?
Thank youAre you running Snow Leopard or Lion? Your info says Snow Leopard. If it's lion then:
In Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
Then you can locate the folders mentioned. -
Hello, I just got an iPhone 4S and it seems that the bluetooth function in it doesn't work. I tried few times to pair it to other non Apple phones but it never worked. Does anyone has an idea how to solve the problem? Tks.
This is not a feature of iPhone, iPad or iOS.
Bluetooth is supported for stereo headsets/speakers, handsfree telephone
devices/headsets, some keyboards, some peer-to-peer apps from the
app store and internet tethering where provided by the carrier.
Other than this it will not connect to a phone/computer/device. (thanks to ckuan for the wording) -
Hi, can someone please tell me why the spell check in pages doesn't work. I went to preferences and enabled this auto spell checker and have set the language to british english. But still it doesn't work while it works perfectly in TextEdit.
Inspector > Text > More > Language
Only applies to selected text, like making it a particular font.
It is not a setting that sticks. If you continue to paste in text from elsewhere particularly the Internet it will have a different or None language set to it. You need to select it and make it B.E.
Peter -
After update my iPad 2 with IOS 6.0.1 the botton mute and sound + doesn't work...any solution for this??? Thanks
There are numerous reports of this issue happening on iPhones. It may be a glitch that will need a new update. Some find that a full shut-down and restart fixes that problem, but not always.
-
I just downlouded the latest version of the Muse CC and it doesn't work well, it freezes all the time, in particular with the tools. Example the selection tool doesn't wor at all. Is there any solution for this problem?
Hi!
I restarted the computer, but the same issue happens again. When I move my mouse over some object or tool, it doesn’t come active at all (only some of the tools works) When I try to change “site properties”, I can’t choose tablet or phone mode or even I can’t select the checkboxes, only thing what I can do is change the numbers (high and width) . After all the main problem is that I can’t select some of the items or functions by mouse, but only by the keyboard. -
I bought an external hard drive for backups to use with Time Machine, but however when I try to connect it with the other windows laptop it doesn't work ? intact it doesn't work on any other device except my MAC ?
Do not worry about it.
Time Machine needs that your external drive is formatted in HFS+, or better known as "Mac OS Extended (Journaled)". This filesystem is used by Apple on Macs and Windows cannot read or write drives formatted with this filesystem, being this the reason why all your devices do not read the external drive except your Mac.
You can only use your external drive to make Time Machine drives. If you store anything different, you may damage the Time Machine structure, so it is better not to use it as a drive to store other data. Instead, get another external drive to do it or create a second partition on the external drive formatted in FAT32 by using Disk Utility > http://pondini.org/OSX/DU3.html FAT32 can be read by Windows PCs -
I have an iPod 4th gen and the bottom part of it doesn't work where the space, .?123, and the go buttons are not working I droped it yesterday but it started doing this an hour ago I can slide to get in but it's stops working after that someone tell me how I fix this
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
Why can't I be able to search for a location in the HTC app?
So, it shows weather for my current locations just fine, but when I search for a specific location it won't find it! The only time it shows weather is when its your current location. And it finds a few areas, such as Anchorage, Alaska. But I would li
-
We just bought two ThinkPad laptops, a refurbed x201 with Win7 and a used x200 with Win8.1. I installed AccessHelp on the x201 but it won't install on the x200 under 8.1. Are any downloadable user manuals available for the x200? Or can AccessHelp be
-
Set List URL in event reciever
Hello All, I want to set list url in event reciever element.xml file. Please to resolve this problem. Thanks.
-
Tab canvas + post-forms-commit + form_trigger_failure
Hi all, There is a tab canvas with eight tab pages in my forms. In the post-forms-commit form-level trigger there are controls based on some conditions before executing the processes. When the conditions in the controls are not met then a stop alert
-
Possible to use interval partitions to drop old partitions?
Interval partitions can add new partitions and I can do a range by date. This is helpful. However, lets say I have alot of tables in my database and I need to keep data for different lengths of time in different tables. Can I set something in the int