"The built-in network interface could not be found"

I'm trying to do a new setup of time machine on my wife's macbook air running 10.5.6 to a hard disk connected via USB. When I try to configure Time Machine (previously unconfigured) to use the disk I get the error "Time Machine could not be configured. The built-in network interface could not be found."
A quick google found only fixes for hackintoshes adding .kext's which I'm not going to try. Any suggestions.

Never mind, the fix is,
1. from the finder menu GO to /Library/Preferences/SystemConfiguration
2. copy the file NetworkInterfaces.plist to your deskop as a backup
3. Delete the file NetworkInterfaces.plist in /Library/Preferences/SystemConfiguration. You will need to authenticate as an administrative user.
4. Reboot.
5. Now you should be able to configure Time Machine to use the disk

Similar Messages

Time capsule error: Time Machine could not be configured. The built-in network interface could not be found.

Trying to install a new time capsule. I get access to the time capsule via Finder and I am able to surf the web. When trying to chose backup disk, it allows me to chose the Time Capsule from the list and type my password. I then get the following error message:Time Machine could not be configured. The built-in network interface could not be found.
What now?

iblastoff wrote:
glad im not the only one with this issue...
i've been able to do one single time machine back up. tried to backup today and i am getting the "time machine could not be configured. the built-in network interface blah blah blah" crap.
Besides this "me, too" complaint with no information, what have you done about it?
Have you tried this: http://support.apple.com/kb/HT3275#5
What is your backup destination?
What sort of Mac do you have (please update your profile)?

Time Machine could not be configured. The built-in network interface could

Time Machine could not be configured. The built-in network interface could not be found.
This is driving me crazy just suddenly happened, any ideas?, have tried the network interface.plist thing without success.

iblastoff wrote:
glad im not the only one with this issue...
i've been able to do one single time machine back up. tried to backup today and i am getting the "time machine could not be configured. the built-in network interface blah blah blah" crap.
Besides this "me, too" complaint with no information, what have you done about it?
Have you tried this: http://support.apple.com/kb/HT3275#5
What is your backup destination?
What sort of Mac do you have (please update your profile)?

The Image viewer flash element could not be found

The image viewer flash element could not be found. What
should I do? Any plug in exists or is it mistake in program? Help
me, please. Thx Joe

Hi,
The issue here is the mapping of the interface to the service in question, and usually points to a possible mistype or rename of something within your service architecture.
You need to make sure your namespace and service name here match your service name itself.
For detailed information, you could refer to:
https://haddicus.wordpress.com/2011/06/06/service-attribute-value-not-found-wcf-services/
http://stackoverflow.com/questions/9557221/the-type-restservice-weddingservice-provided-as-the-service-attribute-value-i
Regards

network path could not be found. Check your spelling or try a different path.

Hi everyone,
I am having problems with Office programs not saving on a network drive. It is displaying this error: <network path> could not be found. Check your spelling or try a different path.
This happens on subfolders only, so if I try saving a file to the root folder, it works. But as soon as I want to save it to a subfolder this happens.
In this sub folder I can find .TMP file and an empty, 0kb Word/Exel file with that name. If I do the save process again, it only asks me to replace the file and save is done no problem. Shared folder is on SBS 2011 and client computers are running Windows
7. It happens to any version of Office (2007, 2010 and 2013).
Can you help me out guys?
Thank you
Vlastimir Sindelic

We are facing the same exact problem but let me give more details to our issue that we are facing. Few users of ours use to access a shared drive (mapped on their computers) and open any file without any problem. Now, when they
try to open a file they are getting the error message "u:\shared\file.ext cannot be found. Check your spelling, or try a different path". After doing some investigation it seems that this error is really saying that someone has the file open. Users
got this error message only if the file is opened by another user. They will be able to open it as soon as the other user closes it. It's suppose to give a notification of "read only" rather than giving this error message "file name" cannot
be found. Check your spelling, or try a different path".
If we manually browse to the path and open the file which is already opened by another user we get the error message we expect to see "read only" message. It's just that when we go from a mapped path the error is "u:\shared\file.ext
cannot be found. Check your spelling, or try a different path" which is not a true error. This is related to office we have already tested that out but have not been able to fix. Please advise.

I cannot log into facebook. I get the following message: 404 Error - Not Found The resource you have requested could not be found on the server. There are many possible reasons for this. Either the file does not exist, there is an error in your request,

I am not able to go to the facebook site. www.facebook.com is not working. I get the following error message. 404 Error - Not Found
The resource you have requested could not be found on the server. There are many possible reasons for this. Either the file does not exist, there is an error in your request, or the file is not accessible in the requested directory. Please verify that:
* You have used the proper case; requests ARE case-sensitive!
* You have entered the URL correctly. (i.e. proper directory/filename)
* You used the FULL URL. (i.e. proper file type: .html, .gif , .jpg, etc.)
* You use a tilde (~) before user directories. (i.e. www.furcen.org/~jurann/ )
* The user/file still exists on this server.
I also get redirected to "Busca Google" when typing www.facebook.com in the address bar.
== URL of affected sites ==
http://facebook.com; buscagoogle.com

I have the same problem and it does not have to do with firefox. Do you have any idea how to fix it through?

Does anyone have a cure for the following error running on Windows, "The procedure entry point sqlite3_wal_checkpoint could not be found located in the dynamic link library SQLite.dll.

Does anyone have a cure for the following error running on Windows, "The procedure entry point sqlite3_wal_checkpoint could not be found located in the dynamic link library SQLite.dll.

I have searched my computer for that file SQlite3.dll and also file QTCF.dll and I cannot find either one when I search my whole computer for it. I cannot fix this! I deleted Itunes and every time I try to download it, it goes through all this download till the end when it says that iTunes.exe-entry point now found and that Procedure entry point message comes up. HELP! This is driving me crazy. How can I get itunes to work again when I can't find the danged .dll file to remove, move or rename!?!?!??

How can I bulk delete songs from the playlist, if original file could not be found.

I deleted the original files from the Library iTines. The songs are still in the playlist. How can I bulk delete songs from the playlist, if original file could not be found. Thank.

Take a look at my FindTracks script. Download it and test it out on a few tracks first. Use the No option first time around to manually confirm each path that it wants to fix so you can see how it works. When you're happy it does what you want select a larger group of tracks to process automatically.
tt2

PRCD-1120 : The resource for database dwhpd1 could not be found.

OEL 5.1
11.1.0.6 Oracle database RAC
11gR2 Grid
Hi,
I have installed 11gR2 grid with ASM and restored/recoverd a 11gR1 database. The 1st node is up using asm but when I check with svrctl I get errors :
[oracle@avgrac01 admin]$ /u01/app/11.2.0/grid/bin/srvctl status database -d dwhpd1
PRCD-1120 : The resource for database dwhpd1 could not be found.
PRCR-1001 : Resource ora.dwhpd1.db does not exist
I have read that it's something to do with SCAN and the remote listeners.
Please can someone point me in a direction/document/help, please

798188 wrote:
OEL 5.1
11.1.0.6 Oracle database RAC
11gR2 Grid
Hi,
I have installed 11gR2 grid with ASM and restored/recoverd a 11gR1 database. The 1st node is up using asm but when I check with svrctl I get errors :
[oracle@avgrac01 admin]$ /u01/app/11.2.0/grid/bin/srvctl status database -d dwhpd1
PRCD-1120 : The resource for database dwhpd1 could not be found.
PRCR-1001 : Resource ora.dwhpd1.db does not exist
I have read that it's something to do with SCAN and the remote listeners.
Please can someone point me in a direction/document/help, pleaseHi,
This error means database is not registered in OCR
If the database was not registered in the OCR, after restoring the database you must manually add the database in the OCR (add database and instances)
http://download.oracle.com/docs/cd/E11882_01/rac.112/e16795/srvctladmin.htm#RACAD5011
http://download.oracle.com/docs/cd/E11882_01/rac.112/e16795/srvctladmin.htm#i1008526
About integrate 11.1 with SCAN 11.2 you must use note below:
How to integrate a 10g/11gR1 RAC database with 11gR2 clusterware (SCAN) [ID 1058646.1]
Hope this helps,
Levi Pereira

Why i receive errors: "The procedure entry point longjmp could not be found in the dynamic link lib. orauts.dll" and "Error ORA-12560"

Hello,
"C:\app\xps\product\11.2.0\dbhome_1" where is my installation of database oracle enterprise 11g; I use Windows 7 Pro.
I have in System PATH : C:\app\xps\product\11.2.0\dbhome_1\bin
I have in HKEY_LOCAL_MACHINE > SOFTWARE > ORACLE > SYSMAN > OracleDBConsoleorcl : "ORACLE_HOME" value "C:\app\xps\product\11.2.0\dbhome_1"
When i execute "sqlplus / as sysdba" command, i receive error: "The procedure entry point longjmp could not be found in the dynamic link lib. orauts.dll" and "Error ORA-12560"
If i execute
set ORACLE_HOME=C:\app\xps\product\11.2.0\dbhome_1
C:\>set PATH=%ORACLE_HOME%\bin;%PATH%
sqlplus "/ as sysdba"
I don't receive Error.
Why?

You don't mention which specific version of the operating system that you are using - Windows XP, Vista, or 7 and whether you're using a 32-bit or 64-bit version.
FWIW, kernell32.dll is a Windows system-level module, so it's possible that you have some corruption in your Windows installation which is preventing FM from launching.
Also, 2Gb of RAM is a bit lean for FM.

"The page you have requested could not be found. (404)"

Used iWeb to create a website. Personal domain. Was working fine. Made a minor change to the copy on the site and republished. Now I get the message "The page you have requested could not be found. (404)" on every page of the website.
What's going on?

Made a minor change to the copy on the site and republished.
You probably changed something in the url which breaks your link. For help you need to provide your personal url so someone can see what the exact problem is.
I assume your site is this?
http://web.me.com/rdhaynes

The specified user domainname\user1 could not be found;

hi,
am writing script for adding the users into site collec admin group.till last week this code was working fine. but from yesday onwards, am getting this error. this user already exists in the farm and AD. etc...
thanks to Simon Doy,. i took refer.from his code:
http://blog.ithinksharepoint.com/2014/05/30/powershell-script-add-user-as-site-collection-admin-to-all-sites-in-web-application/
Add-PSSnapIn Microsoft.SharePoint.PowerShell -ErrorAction SilentlyContinue
$MasterUsernames = "in\userB#in\userC#in\userA;
$UsersNamesArray= $MasterUsernames.Split('#')
$siteCollection = Get-SPSite "http://srvr1:123/sites/engg/"
Write-Host "Setting up user $MasterUsernames as site collection admin for $siteCollection.Title " -ForegroundColor White;
   foreach($singleUserName in $UsersNamesArray)
         #$userToBeMadeSiteCollectionAdmin = $siteCollection.RootWeb.EnsureUser($Username);
         $userToBeMadeSiteCollectionAdmin = $siteCollection.RootWeb.EnsureUser($singleUserName);
         if($userToBeMadeSiteCollectionAdmin.IsSiteAdmin -ne $true)
                   Write-Host "$singleUserName is not site admin"
                  #pause
                   $userToBeMadeSiteCollectionAdmin.IsSiteAdmin = $true;
                   $userToBeMadeSiteCollectionAdmin.Update();
                  Write-Host "User is now site collection admin for $siteCollection" -ForegroundColor Green;
       else
            Write-Host "User is already site collection admin for $siteCollection" -ForegroundColor DarkYellow;
Write-Host "Current Site Collection Admins for site: " $siteCollection.Url " " $siteCollection.RootWeb.SiteAdministrators;
can anyone pls point me why am getting this error suddenly.this is working code and am getting this error only for a particular user.
am getting this error.
Exception calling "EnsureUser" with "1" argument(s): "The specified user domainname\userA;
could not be found."
At C:\powerscripts\AddUsers_SiteCollecAdmin.ps1:20 char:10
+          $userToBeMadeSiteCollectionAdmin = $siteCollection.RootWeb.EnsureUser($ ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : NotSpecified: (:) [], MethodInvocationException
    + FullyQualifiedErrorId : SPException

Hi Sadomovalex,
am using Windows Claims only, not FBA.the issue started only 2 days back. it was working fine till last week.
note: i was creating site collections with dedicated content db through powershell and adding metadata , contents types, doc libs, association etc etc kind of jobs. After end user found some bugs in my site collec .we thought of dropping the site collec
and db and recreate it again. this was repepated multiple times. 2 days back i was performing this - recreatng the same sitecollec and content db - [ after deletion ] it recreated. and end user came to me for adding few members as sitecollec
admin.s since this is a routine task, i wrote this powershell.

The dependency 'BusinessObjects.Enterprise.Sdk' could not be found.

Hi,
Can anyone help me solve this problem, its my first time using crystal reports
i have installed VS 2003 and Crystal report XI professional Edition, i am trying to run the system but it is complaining about the BusinessObjects.Enterprise.Sdk not found, I read from another post where they say crystal report XI comes with BOE sdk so i dont have to install it separately, so i was advised by someone to reinstall Crystal report but it didnt solve my problem.
i also have another error "The dependency 'CrystalDecisions.Enterprise.PluginManager' could not be found." which im assuming its caused by the sdk error.
Does anyone have an idea how to solve this problem?

Hello,
The Professional editions of Crystal Reports XI (v11.0) and Crystal Reports XIR2 (v11.5) are not development level products. This means your VS IDE didn't get updated to stand alone versions of the various Crystal assemblies. I would expect that the Crystal references in your VS2003 application are v9.1.5000 because CR XI/XR2 Professional doesn't update your IDE.
If you're trying to develop an application that interacts with a BusinessObjects Enterprise (BOE) system then you need to install the BOE .NET SDK onto your development machine. The BOE .NET SDK (for CR XI (v11.0) and CR XIR2 (v11.5)) has to be installed from the Enterprise installer media. It can not be downloaded.
You can install the BOE .NET SDK using the u201CServer Installu201D path after launching the BOE installer. Just choose Server Install u2013 you will need your BOE keycode. Next choose Custom install. You'll be presented with a drop down list for the Enterprise components. Deselect everything and then look for the Developer Components option. You may have to drill down into one of the levels to find it. Under Developer Components you'll see the BusinessObjects Enterprise .NET SDK. Select it to install to the development machine. This should allow you to work with the Enterprise .NET SDK.
When you are ready to deploy your .NET application you will also need to install the .NET SDK onto the Web application server (assuming it's not also your Enterprise server). This is because we are not fully managed by the .NET Framework.
Sincerely,
Dan Kelleher

All songs on networked folder "could not be found", though not moved

Last night my computer froze while iTunes was in the process of running the script "Put This In That".
This morning I rebooted my computer by having to hold down the power button and then restarting.
Ever since all this iTunes cannot find ANY of my 80GBs of music.
Here is my situation:
- MacBook Pro; iTunes database/xml file resides in it's default location in my music folder.
- Network Attached Storage device (a DNS-323) holds over 80 GB music in a folder named "iTunes 081102", all of which was being managed by iTunes just fine up til this morning. The "iTunes Music folder location" is set to point to "Volume_1:iTunes 081102:", which is the location of the above folder on the Network Attached Storage. This is the way it was set yesterday, and the way it is still set today.
When I try to play any song I get the standard message "The song... could not be used because the original file could not be found. Would you like to locate it?"
I actually tried to this once, hoping like some other software I use that it would use this as a guide to find everything else, but no such luck.
If I go to "Get Info" for a song and go the Summary tab, under "Where:" all it says is "Not available".
The thing is NOTHING HAS MOVED. Everything is in the EXACT SAME LOCATION as it's always been.
So how do I tell iTunes to "go fetch"?
Is this an issue because I'm using iTunes on a laptop, and for half of my day the files aren't available?
I don't want to reimport, because then I will loose all my ratings and meta-data.

Last night my computer froze while iTunes was in the process of running the script "Put This In That".
This morning I rebooted my computer by having to hold down the power button and then restarting.
Ever since all this iTunes cannot find ANY of my 80GBs of music.
Here is my situation:
- MacBook Pro; iTunes database/xml file resides in it's default location in my music folder.
- Network Attached Storage device (a DNS-323) holds over 80 GB music in a folder named "iTunes 081102", all of which was being managed by iTunes just fine up til this morning. The "iTunes Music folder location" is set to point to "Volume_1:iTunes 081102:", which is the location of the above folder on the Network Attached Storage. This is the way it was set yesterday, and the way it is still set today.
When I try to play any song I get the standard message "The song... could not be used because the original file could not be found. Would you like to locate it?"
I actually tried to this once, hoping like some other software I use that it would use this as a guide to find everything else, but no such luck.
If I go to "Get Info" for a song and go the Summary tab, under "Where:" all it says is "Not available".
The thing is NOTHING HAS MOVED. Everything is in the EXACT SAME LOCATION as it's always been.
So how do I tell iTunes to "go fetch"?
Is this an issue because I'm using iTunes on a laptop, and for half of my day the files aren't available?
I don't want to reimport, because then I will loose all my ratings and meta-data.

How to solve Error SPSite - The Web application at address could not be found

Hello,
I am trying to find out the internal name of a custom SharePoint list columns, for this I have used following code snippet in my
console application but getting below error. The site I am accessing is a public SharePoint web site. This code is working
well with my local host site and i am able to get the internal names of any list columns but don't understand why this is failing with
public SharePoint site
For avoiding this issue I have done following steps:
1.Rebuild the application
2.changed the platform target as "Any CPU"
3.Visual studio and this public site is working in my admin account, but still I am getting the error!
I use visual studio 2010 and SharePoint 2010
please note the error I am getting
Error : The Web application at https://public.sp.a5-group.com/ could not be found. Verify that you have typed the URL correctly.
If the URL should be serving existing content, the system administrator may need to add a new request URL mapping to the intended application
Code Snippet
static void Main(string[] args)
using (SPSite Site = new SPSite("https://public.sp.a5-group.com/"))
using (SPWeb web = Site.RootWeb)
SPList splst = web.Lists["ListCard"];
foreach (var field in splst.Fields)
bool isHidden = splst.Fields[field.ToString()].Hidden;
if (!isHidden)
string internalName = splst.Fields[field.ToString()].InternalName; //This will give you the internal column name.
Console.WriteLine(internalName);
Console.ReadLine();

I thin you need to have sharepoint installed on same computer and URL should be working on this computer.
If this URL WEB APP is in your IISsite try to create disableloopbackcheck registry which should be help
When you use the fully qualified domain name (FQDN) or a custom host header to browse a local Web site that is hosted on a computer that is running Microsoft Internet Information Services (IIS) 5.1 or a later version, you may receive an error
message
http://support.microsoft.com/kb/896861

"The built-in network interface could not be found"

Similar Messages

Maybe you are looking for