The burn with Vista

My burn quility with vista *****, I've tried slowing the speed. Doesn't work. i had the same problem with my XP machine, slowing burn speeds hepled.
Any help.....

Microsoft Windows 8 x64 Home Premium Edition (Build 9200)
Dell Inc. Inspiron 5721
iTunes 11.1.3.8
QuickTime not available
FairPlay 2.5.16
Apple Application Support 2.3.6
iPod Updater Library 11.1f5
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 7.0.0.117
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 002FB7200B6E2500
Current user is not an administrator.
The current local date and time is 2014-01-01 16:14:14.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 11.1.3.8 (x64) is currently running.
iTunesHelper 11.1.3.8 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.3.0),
D:   PLDS DVD+/-RW DU, Rev 
Audio CD in drive.
Found 15 songs on CD, playing time 55:35 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 03:13:47
Track 3, start time 07:40:44
Track 4, start time 11:32:54
Track 5, start time 14:33:34
Track 6, start time 18:24:06
Track 7, start time 22:00:28
Track 8, start time 25:36:27
Track 9, start time 28:47:47
Track 10, start time 32:56:24
Track 11, start time 37:07:54
Track 12, start time 40:11:29
Track 13, start time 45:02:62
Track 14, start time 48:42:65
Track 15, start time 51:56:11
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are:   24.
The drive CDRW speeds are:   24.
The drive DVDR speeds are:   24.
The drive DVDRW speeds are:   24.
The last failed audio CD burn had error code 4310(0x000010d6). It happened on drive D:   PLDS DVD+/-RW DU on CDR media at speed 24X.

Similar Messages

  • SWP works half the time with Vista 64, plus two installs

    Hey all,
     I understand now that SWP only works fully with vista 32 but I do have it working most of the time with vista 64.(only crashed once) My questions are
    1) For some reason on my uninstall folder it shows SWP twice.
    2) When I tried to uninstall one of them its said I was uninstalling part of windows, so I canceled it.
    3) Since its just for vista 32, will running it on vista 64 cause my computers security to be lower than normaL? I mean can a hacker take advantage of the fact that I'm running SWP on vista 64 even though its only made for vista 32.
    Thanks
    Marc
    Message Edited by marchatzi on 10-12-2009 07:35 PM

    Hi Katrina, I am back again.
    Got my Vista-64Bit PC 2 days back. It has been a long 2 days. Today I am trying to get iTunes and my iPod setup, but I am not sure where to go from here.
    I did download iTunes-for Vista 64Bit and installed. Right away it updated to 8.1. No problems. I then copied my entire collection of songs (the same ones from my OLD PC, and managed by iTunes) from the external drive to the NEW C: Drive and to the exactly same named folder.
    Now I don't know how to proceed.
    In the NEW Vista environment, I don't find the same folder structure that was in the old XP PC. The new Vista PC has the following four places with any reference to iTunes and iPOD.
    1. Muisc/iTunes - has 4 files (iTunes Library. iTunes Library Extras, iTunes Library Genius, iTunes Music Library) and i folder (iTunes Music)
    2. C/PKM/iTUnes/iTUnes Music -- this is my creation, and this is where I have all muisc files/tracks etc, was and to be managed by iTunes from this location.
    3. C:/Program Files (X86)/ Apple Software - has 4 files and 3 folders
    4. C:/Program Files (X86)/ iTunes -- has 4 folders and 9 files.
    5. C:/Program Files (X86)/ iPod -- has 1 folder (bin) and 1 file.
    I do NOT see any files with *.itl type extensions.
    I had also exported my Playlists (the file name was music.xml)
    Katrina, where do I go from here? -- need to be able to use the librayr from my old PC, all Ratings from my OLD PC, and my playlists form Old PC, and of course the total libary from the old PC.
    I do have the complete file structures for the OLD PC where iTunes and Apple had saved files and folders - there were three places in addition to my own creation of the location where I ahd saved all the music files. Please let me know if you would like to see the folder structures.
    Thanks.

  • HT203164 I tried my first Windows CD burn with iTunes; the burn fails at different points in the burn with error codes 4450 or 4280.

    I tried my first Windows CD burn with iTunes; the burn fails at different points during the burn, with error codes 4450 or 4280.

    I have the same problem, after years of everything working great. Last time this happened I tried using a different brand of CD and it worked, but I must warn you that now iTunes rejects all three brands I have been trying to use.

  • Cannot see files burned with Vista

    I burned some photos to a DVD using Windows Vista, but I cannot see them in Finder. All I see in Finder is a "Recordable DVD" with nothing in it. If I do "Get Info" I see the following:
    General:
    Kind: Folder
    Size: Zero KB on disk (Zero bytes)
    Name & Extension:
    Untitled DVD.fpbf
    Burning:
    Device: HL-DT-ST DVDRW GSA-S10N
    Media capacity: 4.37 GB
    Content size: 1.3 MB (i.e. the photos are there! somewhere ...)
    Now, "Disk Utility" shows the following info:
    Name : HL-DT-ST DVDRW GSA-S10N
    Type : Disk
    Disk Identifier : disk1
    Media Name : HL-DT-ST DVDRW GSA-S10N Media
    Media Type : DVDROM
    Connection Bus : ATA
    Connection Type : Internal
    Connection ID : Device 0
    Device Tree : /PCI0@0/PATA@1F,1/PRID@0/@0:0
    Locked : Yes
    Writable : No
    Ejectable : Yes
    Mac OS 9 Drivers Installed : No
    DVDROM : Yes
    Optical Media Type : DVD+R
    Device Type : CD-ROM, CD-R, CD-RW, DVD-ROM, DVD-R, DVD-RW, DVD+R, DVD+RW
    Location : Internal
    Total Capacity : 4.4 GB (4,700,372,992 Bytes)
    S.M.A.R.T. Status : Not Supported
    Disk Number : 1
    Partition Number : 0
    Any ideas of how to solve this?
    Thanks!

    I have a similar problem with CD's created with Vista, but if the preferences are set correctly in Vista, compatible CD's and DVD's can be created.
    Following is from Microsoft:
    http://windowshelp.microsoft.com/Windows/en-US/Help/2af64e60-60aa-4d79-ab6c-3a5d b5806cbe1033.mspx
    Understanding the difference between the Live File System and Mastered disc formats
    If you have burned CDs using Windows XP, you are already familiar with the Mastered format. The latest version of Windows offers a new format, called Live File System. Discs that use the Live File System format are often more convenient because you can copy selected files immediately and as often as you want, as if the disc were a floppy disc or USB flash drive. On the other hand, Live File System discs can’t be used in all computers and devices. Use this guide to understand the difference between Live File System and Mastered discs:
    Discs formatted with the Live File System option:
    • Work like a USB flash drive or floppy disk, meaning you can copy files to disc immediately without having to burn them.
    • Are convenient if you want to keep a disc in the burn drive and copy files whenever the need arises.
    • Are only compatible with Windows XP and later versions of Windows.
    Discs formatted with the Mastered option:
    • Don’t copy files immediately, meaning you need to select the entire collection of files that you want to copy to the disc, and then burn them all at once.
    • Are convenient if you want to burn a large collection of files, such as a music CD.
    • Are compatible with older computers and devices such as CD players and DVD players
    Why are there different versions of the Live File System format?
    Each version of the Live File System format is compatible with different operating systems. Depending on which computers you plan to use a disc in, you might need to select a different version of Live File System. If you plan to use your disc on the latest version of Windows, however, you will never need to change the version of Live File System you use. If you need to make discs that are compatible with earlier versions of Windows, use the table below to select the right Live File System version for your needs:
    The following table describes Live File System versions and their appropriate uses.
    Live File System version Best for
    1.02
    This format can be read on Windows 98 as well as many Apple computers. You should use this version if you need to format DVD-RAM or MO (Magneto-optical) discs.
    1.5
    This format is compatible with Windows 2000, Windows XP, and Windows Server 2003. It might not be compatible with Windows 98 or Apple computers.
    2.01
    This format is compatible with Windows XP and Windows Server 2003. It might not compatible with Windows 98, Windows 2000, or Apple computers.
    2.5
    This format is designed for the latest version of Windows and might not be compatible with earlier versions of Windows.

  • Using the IPOD with VISTA

    I have just purchased a new sony vaio, running vista. My older desktop is running xp. I had my IPOD and iTunes working just fine with this existing desktop. I just installed iTunes on the new laptop, and now want to use the iPod with this laptop. I attached it and attempted to sync, that the iPod is using an existing library, and wants to delete it and then use the new library. However, since the old library is on the old PC, it is not able to do this. It then says sync is complete, but none of my music is found on the new laptop. HELP.....

    When you connected the iPod to your new laptop with the empty iTunes did you press "Erase and Sync"? This syncing does not transfer content from the iPod to iTunes, it transfers from iTunes to the iPod. If you linked to an empty iTunes it will have erased the original contents of your iPod and with nothing to sync will have left it blank.
    Connect your iPod back to your desktop computer and it will sync the existing library back onto it again. If you want to connect and use an iPod on more than one computer you need to change the update preference in the iPod Summary tab to "Manually manage music and videos" and click Apply. The content of iTunes and the iPod are not syncronised in this mode so the two can be different. You can directly access the content of the iPod and play it through iTunes and you can drag and drop whatever you want to the iPod from either library:
    Using iPod with Multiple computers
    Managing content manually on iPod
    Syncing Music to iPod
    Something else to be aware of when using an iPod in manual mode is that the "Do Not Disconnect" message will remain on the display until you physically eject the device: Safely Disconnect IPod

  • W500: using the switchable graphics with vista ultimate without the power manager software?

    seriously, invest in a new hitachi travelstar 320gb for 49 bucks from that tiger place online and a usb hard drive caddy, pop in your free clonezilla cd and your rescue and recovery problems will be over!
    after reading all the problems with that software i figured my data was too valuble to get caught in that mess so for under 75 bucks problem solved and i rid my w500 of that bloatware. even cheaper then ordering the recovery disks from lenovo.
    working on getting rid of the rest of the useless software now.
    hey question, how do you use the switchable graphics on the w500 with vista ultimate without the power manager software? if you can thats next!!
    Moderator note: Question added to subject line for clarity.
    Message Edited by Agotthelf on 28-04-2009 08:45 AM

    That's because you are asking a T500/W500 question in the Thinkvantage forum. Anyway, the answer to your question is in this thread.
    ATI recently started packaging their switchable graphics driver together with their regular Catalyst. So downloading their latest driver Catalyst 9.4 from the ATI/AMD site and then modifying it with the Mobility Modder will allow you to use switchable graphics without the power manager. The little problem is just that the released version of the Mobility Modder stopped working with Catalyst 9.2 and you are on your own getting a modified Modder  working on 9.4, see here.
    So I decided not to make more work for myself staying on a modded Catalyst 9.1 and for the time being living without switchable graphics.
    T500: Vista 32, 2.8GHz, 4GB RAM, 15.4" 1680x1050, 500GB 7200rpm, ATI Radeon HD3650 + Intel 4500MHD. T42: XP, 1.7GHz, 2GB RAM, 14.1" 1024x768, 250GB PATA, ATI Radeon 7500.

  • Easy Transfer Music or Burn Media (Vista)

    Getting new PC's with Vista. The announcement makes no mention of what the best way to move the music should be. Easy transfer or just Burn CD's or DVD's and place into iTunes once downloaded on the machines with vista. Any advice from those who have already done this.
    Thanks

    Search the fourm, or just Google for it. This gets posted 10 - 50 times a day.

  • Airport Express problems with Vista

    I have read on here that people are running the express with Vista an I am not sure how? I loaded the disk and everything come up but the Airport setup assistant. When I open the Airport asmin utility it is blank. I am not sure how to get this up and running any help is appriciated.

    I have the exact same problem trying to connect my Airport Express to my Vista laptop. I managed to get around it by using the Admin Utility, choosing "Other..." and then entering the router IP (for me 10.0.1.1) and password "public".
    However after I have enabled WPA2 Security the connection does not work that good. After a short while throughput is degraded and then it drops the connection completely.
    Is Airport Express supposed to work with Vista or what am I doing wrong?
    HP Pavillion Vista   Other OS  

  • Illustrator CS3 not compatible with Vista

    I downloaded the trial version of Illustrator CS3 because my previous program - Freehand, is not compatible with Vista. The Adobe site stated that Illustrator was capable of importing and editing Freehand files so I gave it a try.
    Well, it does import the files with only a few minor font issues. BUT, when you try to SAVE or EXPORT it returns the error message: "can't save illustration". In other words, you can import, work, design, etc. but when it comes time to save or export your work, you can't. So the program is completely worthless.
    Adobe should have made this bug or conflict clear before releasing the product with Vista compatibility and stating that it could import Freehand 9 files. What good is importing the files if you can't save them after making the changes?
    I would caution anybody to wait until there is a patch or at least try the trial version before spending a lot of time and money on a program, only to find you can not save or export your work!

    >I finished editing a project in 2.0 and installed CS3 to finish. Now when I try to render the project it crashes and then I when I restart all of my media is unlinked so I relink save, crash, repeat forever. I guess I need to reinstll 2.0 this CS crap isn't working for me.
    I had a similar problem. I started a 60-minute documentary under Premiere 6.5 and finished it in Pro 2.0. Nightmares!
    I thus recommend starting and finishing each project in one version. I also recommend that when you get a version of Premiere running well on a particular system and you want to upgrade, you build an entirely new system and upgrade on THAT sys. Keep the old system because you have possibly scores or hundreds of hours into getting it to work perfectly. Sell these old systems off as turn-key systems to editors that are less experienced and don't need the power (yet). I have been doing this and it works out well. I am also developing a chain of trainees who will someday be able to COMPLETELY TAKE OVER MY EDITING POST AND THUS RELEASE ME FROM THIS HELL (so I can go back to producing and directing).
    James

  • Migrate from XP to new machine with Vista

    Could someone please describe how to do this?
    I have backed up the catalogue on an external drive, and installed LR onto the new machine.
    However,searching on here there is advice to copy the preview and thumbs files,which I cannot find.
    Also my presets etc, where should i copy them to? On the xp machine ther are in user name/app data/Lightroom
    o the new machine there is no lightroom folder in username/app data.
    Really confused please help!
    Phil

    Ok Guys (and gals)
    All seems to be well ;-)
    I made sure that my images were in the same directories..a little easier because the are on an external drive...however the drive was recognised as G and not H. So after some fiddling in the admin tools to rename it, all was ok.
    The thing that was puzzling me is that the directories in username/application data/lightroom (where the presets etc are stored in XP) have changed in Vista.
    As others said they are now User name/application data/Roaming/lightroom...but the files are not created until after you first launch LR.
    So I copied the previews folder and catalogue from My Pictures in XP to username/pictures in Vista, which seems to be the default location.
    Then clicking the catalogue file opens LR with that catalogue.
    There are no user presets as yet,but once LR has been started the file location is username/app data/roaming/lightroom/presets.
    Copy all the presets there.
    Then I went through the other files and ensured that I copied any other usefull info,such as preferences,metadata presets, export presets,from the existing folders into the new.
    All i had to do then was re set up my id plate, export presets and go through all the options to make sure all was well.
    The only issue is that I have one directory on my hard drive that is not recognised. Some images were on D,on a partitioned hard drive (C and D). Now I have one drive C.
    But the catalogue still has the folder and the previews so its no hastle just to browse to the new location to fix it.
    So yaaaay! Now just the ballache with Vista (I hope not)
    One final note...called LR tech support for help and was told an email would be sent with the full info what to do. After quite some hours no mail....another call revealed no case id and nothing recorded. Hmmmmm...
    Thanks all who replied and hope this helps others
    Phil

  • Ipod touch and itunes not working with vista?

    I bought a 32gb ipod touch(2nd gen) today and so far it's been nothing but a massive headache for hours. I've had an ipod video(30gb) for three years now and it's always been perfect, hasn't give me an ounce of trouble.
    I get home, checked that I had the current itunes version, and then plugged in my ipod touch. I immediately got an itunes error saying that the apple mobile support device was out of date, and I had to re-install itunes. I did that but it still didn't work, it wouldn't recognize my ipod touch. I deleted all my itunes and apple folders and restarted(and uninstalled). Now my ipod still won't recognize when i plug it in on my desktop, it gives me an intunes error saying something like " your ipod touch cannot work because you dont have the 64bit version blah blah ". Which is ridiculous because I'm on windows vista 64bit, and the version of itunes I got was the 64 bit, i checked it three times and even re-downloaded/installed it.
    I tried my second desktop which is on windows XP and it wouldn't recognize my ipod touch either. Then finally I took out my laptop which is windows XP, and plugged in my ipod touch. My ipod touch works fine on my laptop, but not on my other two desktops.
    I need for it to work on my main desktop(the one with vista) because it has all my music.
    So any ideas as to why this is happening? and how to fix it.

    Hi,
    What is the name of the iTunes installer file you used? Try downloading and installing the iTunes again from the iTunes64Setup.exe file located here: http://support.apple.com/downloads/iTunes8_1_1_for_Windows__64_bit
    If the issue persists, verify the usbaapl64.sys driver is being used by following the steps under *Verify iPhone Driver/Service Installation* in this article: http://support.apple.com/kb/TS1495
    If the issue is not resolved after installing iTunes from the iTunes64Setup.exe file and the correct driver is being used, reconfigure or disable the security software on the PC and reinstall iTunes.
    -Jason

  • Y530 with Vista want to go XP

    I just got a new Y530 64bit with vista
    Any problems putting Xp on it?  beside the One key not workign will the drivers all be there?

    The computer with Vista Business should come with XP recovery disks with all drivers on them.
    Keith
    Formerly 600E 2645, T30 2366, X31 2673, T40 2373, T41 2379, T42 2373, T42 2379, T60 1952, T61p 8889, T61p 8891
    Currently T420 4177-CTO, T430 2347-A54, T430 2349-L64, T430 2347-UN9, T430 2342-CTR, Ideapad K1, H520S 2561-1LU

  • How to burn with DVDSP

    Hi chaps, you may have spotted my other post outlining my problems, I have still not resolved the burning with Toast problems but as an alternative I thought I'd try burning in DVDSP however when I hit the 'burn' icon a message appears " Formatting successful formatting finished" what am I doing wrong (forgive my ignorance, I have been handed this project and know very little about DVDSP) Regards and have good weekends Roger

    you may have spotted my other post outlining my problems,< </div>
    Negative, not a clue.
    A project that DVDSP interprets as already burned wither has no elements or has, in fact, been burned.
    Try saving your project under a new name or making a duplicate of it at the Finder level. You want to maintain it s assets but you want to discard or at disassociate its MPEG and PAR files. You can do that a couple of different ways but the easiest might be to find them and place them in a trash before you launch DVDSP or, if you don't like that idea, copy the MPEG and other DVD encodes to a another drive and discard the originals.
    bogiesan

  • SAPGUI Disconnects with Vista VPN

    Dear experts,
    I have the following problem, I'm using the saplogon 710 and build 1016365.
    I'm connecting our server using Windows XP with Windows VPN every thing is fine and it rarely (if ever) disconnects.
    However if I use Windows Vista with the same setup. After approximately 30 seconds of inactivity I get the following error.
    Connection to partner broken : 192.168.13.13:sapdp00 broken
    WSAECONNABORTED Software caused connection abort.
    Deatiled description is
    UZD: Connection to partner broken : 192.168.13.13:sapdp00 broken
    Time                    
    Component          NI (Network Interface)
    Release               710
    Version               39
    Module               nixxi.cpp
    Line                    4854
    Method               NiRead: P=192.168.13.13:3200; L=0.0.0.0:50734
    Returncode          -6
    System Call          recv
    Error No               10053
    Error Text               WSAECONNABORTED Software caused connection abort.
    Counter               1
    I'm sure the problem is related to Vista VPN, I can connect fine with Windows XP but get the error with Vista using a dual boot computer. And I tried 3 different computers all experience the same problem with Vista
    Please Help.

    Thanks for the "push" in the correct direction..
    in internet I found this link which was a bit confusing to me to be honest but as understand there was a change of functionality in vista from XP I decided the give WinPcap application a try
    http://social.msdn.microsoft.com/Forums/en-US/windowssdk/thread/3afd5789-7d71-427c-8be5-2e7239c70c9e
    After about 10 mins of inactivity testing I confirmed it was working. I'll update if the situation changes but so far it works like a charm.
    Many thanks,

  • HT1473 I have iTunes on my Dell Vista 64 bit and while trying to burn a book to cd it keeps telling me to insert a blank cd when I have done that already.  What do I need to do to get it to recognize a blank cd and continue with the burn?

    I have iTunes on my Dell Vista 64 bit and while trying to burn a book to cd it keeps telling me to insert a blank cd when I have done that already.  What do I need to do to get it to recognize a blank cd and continue with the burn?

    Microsoft Windows 8 x64 Home Premium Edition (Build 9200)
    Dell Inc. Inspiron 5721
    iTunes 11.1.3.8
    QuickTime not available
    FairPlay 2.5.16
    Apple Application Support 2.3.6
    iPod Updater Library 11.1f5
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 7.0.0.117
    Apple Mobile Device Driver 1.64.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 002FB7200B6E2500
    Current user is not an administrator.
    The current local date and time is 2014-01-01 16:14:14.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    **** External Plug-ins Information ****
    No external plug-ins installed.
    iPodService 11.1.3.8 (x64) is currently running.
    iTunesHelper 11.1.3.8 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    **** CD/DVD Drive Tests ****
    No drivers in LowerFilters.
    UpperFilters: GEARAspiWDM (2.2.3.0),
    D:   PLDS DVD+/-RW DU, Rev 
    Audio CD in drive.
    Found 15 songs on CD, playing time 55:35 on Audio CD.
    Track 1, start time 00:02:00
    Track 2, start time 03:13:47
    Track 3, start time 07:40:44
    Track 4, start time 11:32:54
    Track 5, start time 14:33:34
    Track 6, start time 18:24:06
    Track 7, start time 22:00:28
    Track 8, start time 25:36:27
    Track 9, start time 28:47:47
    Track 10, start time 32:56:24
    Track 11, start time 37:07:54
    Track 12, start time 40:11:29
    Track 13, start time 45:02:62
    Track 14, start time 48:42:65
    Track 15, start time 51:56:11
    Audio CD reading succeeded.
    Get drive speed succeeded.
    The drive CDR speeds are:   24.
    The drive CDRW speeds are:   24.
    The drive DVDR speeds are:   24.
    The drive DVDRW speeds are:   24.
    The last failed audio CD burn had error code 4310(0x000010d6). It happened on drive D:   PLDS DVD+/-RW DU on CDR media at speed 24X.

Maybe you are looking for