The Button "Catalog is not visible in overview component

Dear all,
I set my type of process order to access a external catalog supplier (OCI) as the maintenance orders. But when I go to process order -> Overview component, I don't see the button "Catalog". There is specific something to do for process order ????
I don't understand. I do it for the project (PS) and Order (PM/CS), it's ok. But I don't manage to process order.
Thanks a lot for your help.
Regards.
Lionel

Go to Table T588M through SM30
Press position at the bottom.
there give module pool as MP000000 and screen number as 2000. the cursor will stop at that table, double click on that table.
The table should be as follows:-
Module Pool          MP000000
Standard screen      2000
Alternative screen   3000
Now check
002     P0000-ENDDA     End Date,
It would be hidden.
make it as standard and save now it will work.
Hope this helped you.
Regards,
SAPUUSER

Similar Messages

When preview my ibook on IPAD the text on the edge of the text box is not visible. How do I fix that?

When I preview my ibod created in Ibook Author on my IPAD some of the text on the edge of the text box is not visible. How do I fix that?

Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

HT201363 How can I make an Apple ID without credit card if the "none" tab is not visible to me?

How can I make an Apple ID without credit card if the "none" tab is not visible to me?
Help me out please

Hello, aligt9p.
Thank you for visiting Apple Support Communities.
To create an Apple ID without a credit card, there is a specific series of steps that have to be processed in order to allow the payment to be set as none on creation of the account.
Creating an iTunes Store, App Store, iBooks Store, and Mac App Store account without a credit card
http://support.apple.com/kb/HT2534
Why can’t I select None when I edit my payment information?
http://support.apple.com/kb/TS5366
If the specific steps have not been processed, a credit or debit card will be required to complete the setup the account.
However, it can be removed and payment method changed to none as long as there is not an outstanding balance.
iTunes Store: Changing account information
http://support.apple.com/kb/ht1918
Cheers,
Jason H.

HT201320 Re: I compose in yahoo using safari but the attachment icon is not visible, I compose in yahoo using safari but the attachment icon is not visible

i compose email using yahoo thru safari and the attachment icon is not visible
from apple ONLINE HELP they told me yahoo version is different than the ipad version??????????
then today they told me not to go thru safari but use the yahoo email app
tried that as well and still no icon of attachment is seen.
PLS CAN SOMEONE HELP AS TO HOW DOES ONE SEE THE ICON FOR ATTACHMENT....as even the apple store guys are unable to help

Iam trying to attach normal files

In webdynpro abap , the ui layout is not visible. please read query fully

hi , in webdynpro abap , the UI Layout is not visible.
I did some settings .
1) in SICF t-code , i actvate the all services realted to http . i dont know which services properly need to webdynpro ui layout.
after activating those services, ui elements are coming . but when i am tryin to drag ui elemetns in to UILayout , it showing some error message. I am not able to drag ui elemetns to ui layout.
Please tell how to solve this problem.
1) if the solution is regarding ip address in host file, please guide me in depth step by step.
2) if the solution is realted to browser settings , please guide me in depth each step by step for settings in browser .

Hi sujana,
I had a similar problem..
if u hav a look at ur url you will come to know the following things:
<schema>://<host>.<domain>.<extension>:<port>/sap/bc/webdynpro/<namespace>/<application name>
the same url can be traced in SICF.
Also u need to add the server ip/domain name in the advanced tab in lan settings so that it does go through the proxy..
You can check the following link: http://help.sap.com/saphelp_nw04s/helpdata/EN/8c/780741375cf16fe10000000a1550b0/content.htm
Best Regards,
navin fernandes.

After downloading a file, the downloads window pops up, but is always empty. the downloaded files are not visible.

After downloading a file, the Downloads window pops up but it is always empty. The files downloaded are not visible on this window. In order to access them, they must be sought out via windows explorer. Any ideas? Thanks.

Be sure Options > Privacy > "Remember download history" is checked.
*[https://support.mozilla.com/en-US/kb/Options%20window%20-%20Privacy%20panel Options window-Privacy panel]
If you want to retain download history, do not clear Download History when using Clear Recent History or "Clear history when Firefox closes" > Settings
*[https://support.mozilla.com/en-US/kb/Clear%20Recent%20History Clear Recent History]
*Clear history when Firefox closes: [https://support.mozilla.com/en-US/kb/Options%20window%20-%20Privacy%20panel Options window-Privacy panel]
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You need to update some plug-ins:
*Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

The method clone() from the type Object is not visible

Hi,
This is my 1st post here for a few years, i have just returned to java.
I am working through a java gaming book, and the "The method clone() from the type Object is not visible" appears, preventing the program from running. I understand "clone" as making a new copy of an object, allowing multiple different copies to be made.
The error occurs here
public Object clone() {
        // use reflection to create the correct subclass
        Constructor constructor = getClass().getConstructors()[0];
        try {
            return constructor.newInstance(new Object[] {
                (Animation)left.clone(),
                (Animation)right.clone(),
                (Animation)deadLeft.clone(),
                (Animation)deadRight.clone()
        catch (Exception ex) {
            // should never happen
            ex.printStackTrace();
            return null;
    }The whole code for this class is here
package tilegame.sprites;
import java.lang.reflect.Constructor;
import graphics.*;
    A Creature is a Sprite that is affected by gravity and can
    die. It has four Animations: moving left, moving right,
    dying on the left, and dying on the right.
public abstract class Creature extends Sprite {
        Amount of time to go from STATE_DYING to STATE_DEAD.
    private static final int DIE_TIME = 1000;
    public static final int STATE_NORMAL = 0;
    public static final int STATE_DYING = 1;
    public static final int STATE_DEAD = 2;
    private Animation left;
    private Animation right;
    private Animation deadLeft;
    private Animation deadRight;
    private int state;
    private long stateTime;
        Creates a new Creature with the specified Animations.
    public Creature(Animation left, Animation right,
        Animation deadLeft, Animation deadRight)
        super(right);
        this.left = left;
        this.right = right;
        this.deadLeft = deadLeft;
        this.deadRight = deadRight;
        state = STATE_NORMAL;
    public Object clone() {
        // use reflection to create the correct subclass
        Constructor constructor = getClass().getConstructors()[0];
        try {
            return constructor.newInstance(new Object[] {
                (Animation)left.clone(),
                (Animation)right.clone(),
                (Animation)deadLeft.clone(),
                (Animation)deadRight.clone()
        catch (Exception ex) {
            // should never happen
            ex.printStackTrace();
            return null;
        Gets the maximum speed of this Creature.
    public float getMaxSpeed() {
        return 0;
        Wakes up the creature when the Creature first appears
        on screen. Normally, the creature starts moving left.
    public void wakeUp() {
        if (getState() == STATE_NORMAL && getVelocityX() == 0) {
            setVelocityX(-getMaxSpeed());
        Gets the state of this Creature. The state is either
        STATE_NORMAL, STATE_DYING, or STATE_DEAD.
    public int getState() {
        return state;
        Sets the state of this Creature to STATE_NORMAL,
        STATE_DYING, or STATE_DEAD.
    public void setState(int state) {
        if (this.state != state) {
            this.state = state;
            stateTime = 0;
            if (state == STATE_DYING) {
                setVelocityX(0);
                setVelocityY(0);
        Checks if this creature is alive.
    public boolean isAlive() {
        return (state == STATE_NORMAL);
        Checks if this creature is flying.
    public boolean isFlying() {
        return false;
        Called before update() if the creature collided with a
        tile horizontally.
    public void collideHorizontal() {
        setVelocityX(-getVelocityX());
        Called before update() if the creature collided with a
        tile vertically.
    public void collideVertical() {
        setVelocityY(0);
        Updates the animaton for this creature.
    public void update(long elapsedTime) {
        // select the correct Animation
        Animation newAnim = anim;
        if (getVelocityX() < 0) {
            newAnim = left;
        else if (getVelocityX() > 0) {
            newAnim = right;
        if (state == STATE_DYING && newAnim == left) {
            newAnim = deadLeft;
        else if (state == STATE_DYING && newAnim == right) {
            newAnim = deadRight;
        // update the Animation
        if (anim != newAnim) {
            anim = newAnim;
            anim.start();
        else {
            anim.update(elapsedTime);
        // update to "dead" state
        stateTime += elapsedTime;
        if (state == STATE_DYING && stateTime >= DIE_TIME) {
            setState(STATE_DEAD);
}Any advice? Is it "protected"? Is the code out-of-date?
thankyou,
Lance 28

Lance28 wrote:
Any advice? Is it "protected"? Is the code out-of-date?Welcome to the wonderful world of Cloneable. In answer to your first question: Object's clone() method is protected.
A quote from Josh Bloch's "Effective Java" (Item 10):
"A class that implements Cloneable is expected to provide a properly functioning public clone() method. It is not, in general, possible to do so unless +all+ of the class's superclasses provide a well-behaved clone implementation, whether public or protected."
One way to check that would be to see if super.clone() works. Their method uses reflection to try and construct a valid Creature, but it relies on Animation's clone() method, which itself may be faulty. Bloch suggests the following pattern:public Object clone() throws CloneNotSupportedException {
   ThisClass copy = (ThisClass) super.clone();
   // do any additional initialization required...
   return copy
if that doesn't work, you +may+ be out of luck.
Another thing to note is that Object's clone() method returns a +shallow+ copy of the original object. If it contains any data structures (eg, Collections or arrays) that point to other objects, you may find that your cloned object is now sharing those with the original.
Good luck.

Hi. The buttons and wheel of my iPod 4th generation do not work. The hold button resets the iPod, and the shuffle shake works. The music plays by shuffling but I can't access albums etc due to the buttons and wheel not working.

Hi. The buttons and wheel of my iPod 4th generation do not work. The hold button resets the iPod, and the shuffle shake works. The music plays by shuffling but I can't access albums etc due to the buttons and wheel not working.

Did you restore from backup?
Next would be to restore to factory settings/new iPod since maybe you have some corruption in the backup

In Logic Pro or Pro X Meta Events don't work correctly; for example inserting Stop Playback number 52 in a specific position the playhead stops wrongly several ticks before. Then the button play does not start.

In Logic, Pro or Pro X Meta Events don't work correctly; for example inserting Stop Playback number 52 in a specific position the playhead stops wrongly several ticks before. Then the button play does not start.

Curious if what your describing is similar to issue 4 which starts around 9:15 in video...
https://youtu.be/q93jdOhi4Oc
If so this started for me, or at least I noticed it for the first time in LPX 10.1.1. What version of logic are you running?
I've recently found that this issue also affects note timing on instrument tracks that use the "External Instrument" plugin.

Link or buttons often are not visible on some pages although I can find them by moving the cursor around in the area I expect the link to be (as in a "Checkout now" button).

This happens mainly on pages from commercial sites. For example, my online banking site. Most of page displays, but often critical stuff like an approval button is invisible even tho the link is there. I have been on the phone with a person at a commercial site who also uses Firefox and that person could see everything on the page. What settings should I check?

I have been baffled by this same problem for almost a month now. The biggest puzzlement for me was that it was occurring on internet pages whether I was using Firefox or IE 6.0. This made me think it was something in my settings but for the life of me I couldn't figure out the setting nor find any answer on the internet.... until today!
Try this page and see if it corrects your problem:
http://en.kioskea.net/faq/60-white-background-s-problem-in-web-pages
It is the high-contrast setting under Accessibility Options from Control Panel. Make sure that the High-Contrast is NOT checked.
Hope this helps!

Custom View not visible in Overview page as AB unless "Reset to Default"

Hi Experts,
I am facing a strange issue here.
I enhanced the component TPMOE and created a custom view ZTRADESPENDEXCEPTION in it.
Now i have added this view as assignment block in all 6 configuration available for the overview page.
I have redefined the DETACH_STATIC_OVW_VIEWS and REATTACH_STATIC_OVW_VIEWS.
The issue i am facing is that my view assignment block is not visible to the user unless he/she goes to the personalization of the overview page and hits "Reset to Default". Once this is done, later on users can change there personalizations and everything works fine.
Now i am not sure i can go and tell all end users to go to personalization of the TPMOE overview page and click on "Reset to Default".
Is there any other way i can show my view to the end users?
I have done this on the lines of overview page layout changing when you select product planning basis while creating Trade Promotions.
Thanks and Regards
Gaurav Kumar Raghav

Hi Amar,
My coding is given below.
In DETACH_STATIC_OVW_VIEWS, the coding is:
Call Super Method
ls_viewid-view_id = '<My View Name>'.
Append ls_viewid to rt_view_id
In REATTACH_STATIC_OVW_VIEWS, the coding is:
Call Super Method
if <flag> = 'X'.
ls_viewid-view_id = '<My View Name>'.
Append ls_viewid to rt_return.
endif.
In debug mode, the coding get executed correctly and my view is returned for attachement.
For each user, the first time, i need to say "Reset to Default".
After that it works fine, my view is displayed.
Is the program "BSP_DLC_DELETE_PERSONALIZATION" a good solution to my problem?
Thanks and Regards
Gaurav Kumar Raghav

Task outcome button in Infopath not visible to users having contribute access

Hi,
I have followed the article to add an additional button:
http://thinketg.com/approve-or-reject-what-about-a-third-option-in-sharepoint-2010-approval-workflows/
The site was earlier in 2010, and now migrated to 2013. But the workflow is working fine.
The additional button in InfoPath is visible to users having full control, but not getting visible to users having contribute access.
Setting permission to full control in site is showing the button, but I cannot change the permission of users.
How to fix this?
Thanks

hi,
in SharePoint 2013 there is another level of permission.
Edit
Enables users to manage lists.
Contribute permissions, plus:
Manage Lists
Can you check with this weather you are able to see button.
Enables users to manage lists.
Contribute permissions, plus:
Manage Lists
Whenever you see a reply and if you think is helpful,Vote As Helpful! And whenever you see a reply being an answer to the question of the thread, click Mark As Answer

I have iMovie 11 version 9.0.04. When I try to burn a movie on a dvd the button ''share ''does not open the idvd window. I do not find idvd in my computer

I want to burn on a dvd some videos I have on Quick time player version 10.1 and on imovie version 9.0.04. On the tutorial it said ,with imovie, to select a video, clic the button share, the idvd button, and the idvd will open automatically, but idvd does not open. My computer said that I have a 6.0.4 idvd version but I do not find it in my applications list. I tried to download the next versions but is said that it is not possible. How can I burn my videos on dvd-r?

I want to burn on a dvd some videos I have on Quick time player version 10.1 and on imovie version 9.0.04. On the tutorial it said ,with imovie, to select a video, clic the button share, the idvd button, and the idvd will open automatically, but idvd does not open. My computer said that I have a 6.0.4 idvd version but I do not find it in my applications list. I tried to download the next versions but is said that it is not possible. How can I burn my videos on dvd-r?

Details button on iView not visible..Please guide :)

Hello All,
Am working on a CRM iView. As in other EP iViews, am not able to view the Details icon which appears in the right corner of iView tray.
I have set the properties like Add to Favorites, Refresh which would be visible (context menu) in the above mentioned icon.
How can I enable this icon?
Awaiitng Reply.
Thanks & Warm Regards,
Ritu

Hi Karin,
Thank you for your reply and I found a way out of this.....but its not exactly what i am looking for
in an iView, when you view the properties, you get propeties like iView Tray along with other properties which when enabled are visible/accessing as context menu in the Options icon (which is along with the Collapse icon) but inspite of enabling it, when you preview it, it is not visible. you need to attach it to a page to view its Tray options.
so by doing this i got my solution but what i wanted to know that there are ways that inspite of doing what i mentioned above, i can still hide it.
I think there was a WebLog on this but dont remember now.
Please do let me know ur suggestions for the same......
Awaiting Reply.
Thanks & Warm Regards,
Ritu

Photos shown in the Package Contents are not visible in iPhoto.

I am using iPhoto '08 (7.1.5 (378)) and have suddenly found that the last 3 years worth of photos are not displayed in iPhoto while they are still visible in the Package Contents (using Finder). The folders (with event and image content) for 2012 through part 2009 are in Originals, Modified and Data but do not get picked up by the iPhoto application. I have backups upto April 2011 i.e. no backups for a considerable number of photos since April 2011.
I have searched previous discussions whereupon I have tried using the re-build option in iPhoto Library Manager (it re-builds with the photos missing) and all the re-build options available when launching iPhoto with the Option+Command keys pressed (with seemingly very little activity).
Has anyone had this problem? Have I missed a relevant discussion? Does anyone know how I can re-instate my missing photos and events in iPhoto?
Thank you in anticipation.
Martin

When you repaired the libary did you check the option ot recover orphane3d photos in the iPhoto Library folder along with rebuilding the database file and repairing file permissions and?
If that doesn't help the try the following:
Starting over from scratch with new library
Start over with a new library and import the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from your original library as follows:
1. Open the library package like this.
2. Launch iPhoto with the Option key held down and, when asked, select the option to create a new library.
3. Drag the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from the open iPhoto Library package into the open iPhoto window.
This will create a new library with the same Events (but not necessarily the same Event names) as the original library but will not keep the metadata, albums, books slideshows and other projects.
Note: your current library will be left untouched for further attempts at a fix if so desired.
OT

The Button "Catalog is not visible in overview component

Similar Messages

Maybe you are looking for