The button to turn screen on and off is stuck what can i do to make unstuck

I am having trouble with my ipod the button to turn off and on screen and it is stuck what can i do to fix it

Hi deenabro,
First try resetting your iPod by holding down the sleep and the home button at the same time until the silver apple appears (ignore the red slider bar if it appears). If that does not work, you may need a visit to the Genius bar.....
Cheers,
GB

Similar Messages

My Iphone remains in silent / vibrate mode only. How do I get it to ring. The button is turned on correctly and I have re-set the phone

How do I get it to ring. The button is turned on correctly and I have re-set the phone

If you feel you have been ripped off, you should take the matter up with
the person who sold you the iPhone. Perhaps Amazon can assist since
the iPhone was not correctly described.

HT3180 An Apple TV update was processed (Steps 1 and 2). The Apple TV device then did not indicate it was on. I press the remote button to turn it on and nothing happens. What do I have to do?

An Apple TV update was processed (Steps 1 and 2). The Apple TV device then did not indicate it was on. I press the remote button to turn it on and nothing happens. What is wrong? What do I have to do? I even replace the battery on the remote to insure it was working.

Welcome to the Apple Community Glenn283.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.
(You may already have a micro USB cable if you have a camera or other digital device)

Well I have a new macbook pro and there is a software update available and after i update it, it keeps asking for the same thing to update over and over again! What can be done?

Well I have a new macbook pro and there is a software update available and after i update it, it keeps asking for the same thing to update over and over again! What can be done?

The App Store version sometimes gives problems. As you can't install 10.8.4 from the App Store, download and install the Combo edition > http://support.apple.com/kb/DL1659?viewlocale=en_US&locale=en_US This edition will work and will update OS X to the most recent version, in that case, 10.8.4

I forgot the password of my iphone 5 and it was disable, what can i do to unlock it, without loosing my pictures?

I forgot the password of my iphone 5 and it was disable, what can i do to unlock it, without loosing my pictures?

Hopefully you had it backed up on icloud on or your computer. Try doing a restore by putting your phone in recovery mode then restoring your back up.

The sound on my iphone no longer works, nor do the buttons at the side that turn sound on and off/volume control. But weirdly, you can play music without headphones. Tried restore and jack in and out. No luck... any ideas?

The sound on/off button onthe side of my iPhone no longer works, nor do the volume buttons. All sound has disappeared from the phone apart from the Music which still plays. Have tried th Restore and restart phone plus have plugged and unplugged phone jack. No luck - any idea anyone?

One thing that helped was getting a toothbrush and scrubbing the dock connector on the phone. I scrubbed the connector and used compressed air for about 1/2 hour till the connector looked much cleaner. An Apple employee told me that the pins on the phone had a little corrosion and sand. The problem hasn't gone away completely, but has been significantly reduced. I'm going to hold out until my contract expires after which time I'll switch to an iPhone5 (or newer) or Android phone.

I can't get the volume to work when I watch a you tube video, there's no volume slide under the play button, and my volume control on my I pad won't do anything either, but the volume of all my alarms and sounds works perfect, what can I do??

I can't get the volume to work when I watch a you tube video, there's no volume slide under the play button and my volume control on my I pad don't do anything to help, but yet my volume works perfect on everything else, what can I do???

do u have your ipad doing airplay because that could happen

My screen flickers and is mostly pink, what can I do to fix it?

How can I fix the screen on my iPad? It flickers and is mostly pink.

Yes, similar reservation. Any system which cleans system caches has the risk of doing it the wrong way. There is no right way that I can find that works reliably under any situation short of backing up and recovering only your essential files. And since the wrong way ends up making the system inaccessible, it is better just to work with a working system's backup, than try to meddle with the cache files in the first place.

My ipod touch wont turn on so i plugged it into itunes and a link popped up and it try to restart my ipod and when the process is running it says and error occured (28) what can i do to fix this problem ?

my ipod wont restart and it says error has just occured (28)

Error 23, 28, 29: These errors may indicate a hardware issue with your device. Follow the steps in this article. Also attempt to restore while connected with the white USB Dock Connector cable that shipped with your device, on a known good computer and network to isolate this issue to the device. The MAC address being missing or the IMEI being the default value, (00 499901 064000 0), can also confirm a hardware issue. Out-of-date or incorrectly configured security software can also cause these errors.
Above from:
http://support.apple.com/kb/TS3694#error28

Iphone 3gs quit working. Can't slide button. It was bouncing and then froze. What can I do?

The images started bouncing a little. The phone then froze. I could open it through the camera option, but it would just start bouncing again and lock up. I pressed power and home button to restart it, but no help. I updated it, but no help. In fact, the camera option while locked doesn't even appear now. Any thoughts as to how I can fix this problem? Thank you!

I'm having a same problem, taking my phone to genius bar tonight. Is there any virus going on??

I keep getting a message "iTunes could not back up the iphone because the back up was corrupt ot not compatible with the iPhone. Delete the back up for this phone and try again." What can I do to fix this tried deleting and reinstalling itunes twice.

I have an iPhone 3gs. How do I fix this or delete the back up?

See this Older Discussion... Just read iPhone instead of iPod...
https://discussions.apple.com/message/12542562#12542562

IPhone Display turning itself on and off

Hey Guys,
I'm totally in love with my iPhone 3G but since I got it replaced by Apple (warranty), I discovered that in sleep mode the display randomly turns itself on and off again.
"On" in this case does not mean displaying any content nor the lockscreen, but mysterious black stripes that run vertical.
This occurs every few minutes and is really annoying me.
I tried to completely erase all content and set it up as a new iPhone but the stripes are still there (on 3.1.2) as they were on 3.1.0.
Is there any solution for this or do I have to call Apple Support again?
Greets,
Stefan

If a Restore didn't fix it, it's a hardware problem - contact Apple.

Hello my Mac Air is frozen on the grey screen (with the apple symbol, sleeping mode, restart-and off button), once you turn it on.

hello my Mac Air is frozen on the grey screen (with the apple symbol, sleeping mode, restart-and off button), once you turn it on. I Can`t press any button.My Mouse still works. Battery is charged. Alt-cmd-escape doesn`t work It even after a forced shutting off, the problem is the same.   what should i do? Thank you for your help.

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
     a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 6
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 7
Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 8
This step applies only to older Macs (not current models) that have a logic-board ("PRAM") battery. The battery is distinct from the main battery of a portable. A dead logic-board battery can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions.
Step 9
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested.

My iPhone keeps blinking the apple screen on and off, as though it is turning on, but it goes no further. I've tried the two-button shut down, but nothing is changing. What do I do?

My iPhone keeps blinking the apple screen on and off, as though it is turning on, but it goes no further. I've tried the two-button shut down, but nothing is changing. What do I do?

First try a Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414
3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
Note on Recovery Mode.
You may need to try this More than Once... Be sure to Follow ALL the Steps...
After you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766

TS2771 My Ipod touch displays white lines across the screen. I've turned it on and off but still shows up HELP!!!

My Ipod touch displays white lines across my entire screen. I've turned it on and off and it still hasn't cleared up.HELP!?!

Try the standard fixes:
- Reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPod
If you still have the problem that points to a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

The button to turn screen on and off is stuck what can i do to make unstuck

Similar Messages

Maybe you are looking for