The BW Total Stock Not Matching with ECC5 Total stock as on 31-08-2007

Hello Masters and learned Gurus,
As per the Analysis, I could find that in ECC5 the Stock as on 31.08.2007 is showing 13 for the Material 16901 where the Issues Total is added to the Stock on 31.08.2007 and finally it is showing the result as on 31.08.2007 19 in BW.
So, In BW these values are not reflecting as the values available in ECC5.
And also i found that the data to the cube is populating from Transactional ODS through APD ( Analysis Process Designer ).
Please help me in this regards.

Similar Messages

Totals in BEx query not matching with actual total

Hi,
We have one report in BI, the total for few columns (Given by BI system i.e system generated) for the values of the key figures is not matching with actual total of that values...
I am confused to see, how sap BI can do the totaling mistake...
Please suggest and help....
Thanks,
Nitika

Hi
Please check following things
1. Check key figure aggregation properties, how it is defined, it might have been defined as Avg, Last,first value or it might using exceptional aggregates.
2. Double check your process of validation between cube and bex report for totals.
Thanks
Raghu.

The creditors report is not matching with the G/L account

Hi Gurus,
The creditors report is not matching with the G/L account ,where i can go and find out the differences ?
Please give me advice,
I will assign points
Thanks&Regards,
Kumar

Hi Kumar,
There could be three reasons.
1. You may have more than one recon accounts for different vendor groups. So, you need to select all the GL accounts when reconcile with Vendor balances.
2. You may have some special GL transactions, which may post to different reconciliation accounts. Please check Special GL transactions (Down payments so on)
3. Your vendor recon accounts may be changed after some postings. Please check. If changed, you need to select these GLs also for reconciliation with vendor balances.
Hope this will help you. If not clear please reply, I will explain you.
Pl. assign points if useful.
Thanks

I have been trying to update my cc info and for some reason it has kept saying that the cc info does not match with the bank so the transcation failed every time I was trying to download something even when it's free but my cc got charged $1.- each time.

I have been trying to update my cc info but for some reason it has kept saying the cc info did not match with the bank info so the transaction failed every time I made an attempt to download something even it was free. However, I saw my cc online got charged $1.00 everything I was trying to update my cc info ...why?

Im wondering why my post hasn't been answered yet. I did file a report with the BBB and I had a rude representative from Verizon call me named Steve. He said I can file all of the reports I want and I will just keep getting calls from him. I can understand why my phone couldn't be replaced because of the small crack. I guess I have to eat that one (but it sucks because the lollipop update is what caused the problems) but what about all of the data overage I had to pay for for trying to fix this phone because of a lollipop update. I dont think it is fair to have to pay that as well. In addition, because I have an east coast phone number but live on the west coast, I cannot have tech support after 8pm. Verizon has cut this off. Im very dissatisfied and I have been a customer of Verizon for 13 years. Im hoping for a response this time.

The Company Codes do not match with cost/profit center.

We are using custom designed ZIBIZA_DOC_POST transaction code for uploading text files to company code 0303
I am getting the following error.
The Company Codes do not match with cost/profit center.
what configuration do i need to do to resolve the following issue.
Any help will be appreciated
waiting for your reply.
Regards
Lakshman

I have checked in ks13 and se 16 everthing is fine still iam facing the same problem.
i am explaning the question in more detailed manner
Hi
We are using custom designed ZIBIZA_DOC_POST transaction code for uploading text files to company code 0303. We are able to upload the data using the above transaction code for the G/L account 24221030 (Non-Guaranteed Accommodation Balance sheet account) profit centre FXXX.
Where as for G/l account 41141010 (Handling cost a/c profit and loss account) profit center FXXX, I am unable to upload the same data, it shows the following error.
The Company Codes do not match with cost/profit center.
Where as for the same G/l accounts in company code 0311 it is getting uploaded correctly for the above two accounts i.e.
24221030 (Non-Guaranteed Accommodation Balance sheet account) with different profit center G730
41141010 (Handling cost a/c profit and loss account) with different profit center G730
We are not getting the above error in the company code 0311.
Any help will be appreciated.
Thanks & Regards
Lakshman

Need to reset Airport Extreme password, but the instructions provided by Apple and the support community do not match with what I get in my computer.

I have followed the directions given on the Apple support pages and the ones provided in this community, but they do not match with what I get from the Airport Utility. According to the dorections, after starting a soft restart on the Airport Extreme, I should select the network from the menu bar item (which I suppose is the symbol for wi fi). Then it says to open the Airport Utility and select the Airport Base Station, ok up to now. But the instructions say that after selecting the base station to "click Continue". In my Airport Utility, which is the latest version, there is no Contimue. When I select the Base Station I get a bubble with information on the base and an "Edit" button. By clicking on this button, I am able to get a new window with info on the Base, inlcuding password, but I never get the window which says that the device has been reset. I need help, as I have bought a second Apple computer and need the password to set the wifi preferences, and I forgot the password for the Airport Extreme.

You're doing everything right. The problem is that the Apple Knowledge Base article is outdated and the screenshots do not correspond to the new version of AirPort Utility.
If all you need to do is find the password for the Extreme, you can do that by following this procedure. Use the Mac that is already configured to connect to your Extreme's network.
You can retrieve your existing wireless network password from a Mac you normally use on that network. Your wireless network password is stored in your Mac's Keychain.
You must first have an Administrator account on a Mac that you use with that AirPort Base Station, one that is used to connect to your AirPort network.
On that Mac, open the Utilities folder. Find Keychain Access and launch it.
In the search field at the upper right, type Airport. All the Keychain entries for your base station will appear there, as well as other entries.
Look at the column "Kind". The entry you want to select will be labeled "AirPort network password" (not "AirPort base station password" or anything else).
If you are trying to recover the AirPort Base Station password then the entry you want to select will be labeled "AirPort base station password" not "AirPort network password".
Double-click that, and in the window that appears check the box for "Show password".
You will get the following window:
In the Password field type your Mac's Administrator password - the same one you used to log in to that Mac.
Then, click Allow, and your wireless network password will appear in the "Show password" field:
Make note of it.
Close the window, then quit Keychain Access.

EBS Closing balance not matching with opening balance.

Hi,
The Scenario: The first file for EBS is uploaded. The Second file opening balance did not match with the first files closing balance.
As per my understanding the system throws an information message that FB729 that the closing balance did not match with the opening balance. The docuemnts also gets posted
Question: If the bank sends the corrected file after uploading the first error statement how will we update the corrected account statement with appropriate opening balace.
Thanks,
Raja.

Hi Taro,
             Thanks for your reply. Infact Initially I was of the same opinion that if there is inconsistency in the closing and opening balance SAP would not process the statement. Thanks for your investigation the sysytem is behaving differently for different formats.
               The SAP note 947857 only deals with a particular scenario where there is no inconsistency between closing balance and opening balance but the error comes up.
               I will try to explain why I am asking about a functionality which updates the opening and closing balances of a statement based on our past experiences:
                If we receive a wrong statement with wrong opening balance from the bank it would take us two weeks to convince the bank about the wrong opening balance and subsequently bank sending the corrected account statement. If the FB729 message is an error message then there is no option but to wait till two weeks to upload the next statements.
               So I want SAP to upload the wrong statement and the subsequent statements as they come form bank. To correct the opening and closing balances i want to check if there is some statndard functionality which can do this. Rather than Table update as you suggested I would prefer a custom program for this functionality if standard does not allow.
                If the difference between closing and opening balance is due to a missing statement then SAP has suggested a note "SAP Note 1025077 - Problem with uploading out-of-sequence BAI2 bank statement" which actually allows the out of sequence statements to be uploaded.
                 Finally I would prefer the option of the wrong statements to be uploaded into SAP in the order they have come from the bank and subsequent corrections to the statements as approved by the bank.
Thanks,
Raja.

Asset Balances Are Not Matching with General Ledger

HI,
After Doing asset year ending,balance carry forward,,,the Asset balances are not matching with the General ledger.what is the reason?
Kindly help me in this regard...it is very urgent.
Thanks
Sap Guru

Please run ABST2 for the relevant company code to reconcile FI and AA.
then check this out through ABST.
Regards
Velumani

Fund center reports Assigned values are not matching with ledger balances.

Thanks for your Support. We have activated funds management in May-2009. And deactivated one or two times. Now the status is active.
Now we are taking reports the assigned values are not matching with gl ledger balances.
1. We need to update records for April- May.
2. Records in between deactivated and activate time.
Please suggest updating fund centers and commitments.
Regards

hi ELI
i have checked the follwoing secnarios
1. funds management deactivated.
2. one document posted with amount10000
3. funds management activated.
4. we have executed FMN0
here no document is selected after execution.
Please suggest what are the activities we need to do if i am wrong...
Regards

GL balances are not matching with Fixed assets ledger

Hi,
Please suggest me regarding this...
The issues is:when the legacy balances are uploaded in to sap there was the mistake.3 assets were entered twice(once in asset class 1250 & once in asset class 1300).It causes the GL balances are not matching with Fixed Asset balances(GL is less than FA).so now the client is asking to make manual entry by removing the recconcilation account settings and post manual entry then keep the reconcilation account as usual.They wanted to reverse the accumulated depreciation for the above 3 duplicated asssets for year 2007 & 2008.
How can i achieve the below:
1.GL balance was not equal (i.e lower) to FA ledger even at the time of go live(FI is lesser than FA)
2.For this i need to post one manual entry in FI-GL with the GO-LIVE date.is it possible? suggest me how to post?
3.After that i need to reverse the accumulated depreciation for the above 3 duplicated assets.how can i do this?
4.After that i need to remove the above 3 duplicated assets,how can i?
Please help me by giving your thoughts regarding this
Thanks
Sap Guru

Hi,
It is possible to post the adjustment entry from go live date provided you open the posting periods for the pervious year. (However this approach is not recommended for the following reasons - you have closed the books and must have published the results to local authorities. Adjustment now in the past year can cause some trouble from auditors etc. Secondly you are adjusting the GL balance for the last year, so you will have to complete the period end and year end closing for GL balances. So avoid kindly it)
For your problem - Go to transaction code OASV and post adjustment entry for the current period. Also check if your field status of assets contain field for shutdown of assets. If not change your field status accordingly. Once adjustment is done you shutdown the asset so that it does not post depreciation in future depreciation runs. (this will cater to your need of eliminating the assets. If you retire the asset then you will have to deal with gain or loss on retirement of an asset. If you can accommodate this entry, then you can use this figure in the final adjustment entry.)
Or Go to transaction code OAMK and set the recon account to post the adjustment entry.
Reversal of depreciation is not possible in SAP. So the only way to reverse the accumulated depreciation is by changing the recon account or using OASV, and passing adjustment entry.
regards
Thomas

Asset Balances not matching with G.L accounts

hi,
we some issue in asset accounting, the asset balances is not matching with g.l accounts, there are some amount which is updated in asset but it is not updated in G.Laccounts,
how to match the asset balances with g.l accounts , when i run the ABST2 it showing the difference amount , how to adjust this amount in the G.l account
Regards,
Balu.K

Hi,
You need to pass some manual entries through OASV.
Values appear in asset reports are coming from AS91.
Entries passed through OASV are update in gl accounts.
Before passing the entries please check the values.
Hope this will clear.
Regards,
Sankar

GL account balance not matching with the total stock value

Hi,
The GL account balance is not matching with the total stock value in report RM07MBSTfor stock in transit, Can anyone please let me know, where should, I look into to verify the reason for difference.
Quick response will be appreciated.
Thanks & Regards

I am able to solve this issue. My client has a customized report, which helped me to look into the details of stock in tranisit account. Stock in transit account actually include PPV and TPV alongwith standard cost.

Why the doc total amount is not matched with the total item line amount?

Hi,
Recently when i try to update something in sales order via my add-on, i got an error said u201CThere is a difference between the document total and its components. [ORDR.DocTotal][line: 0] Iu201D Then i checked the sales order in SAP B1, I found the document total amount was not matched with the item line total amount. Actually the item line is quite simple, there is only one item line with qty 1. How comes the document total could be different with the amount from item line? I know the document total amount is a read-only field which is calculated automatically by SAP. This is really weird for us, we don't know how this happened.
Has anyone experienced similar situation like mine and how this happens?
Thanks,
Lan

I am having this same issue and I have additional information.
I am on ver. 8.8 PL 16.
Periodically (mulitiple times a week), when a Sales Order is created, the Doc Total amount is -zero- when there are clearly items that have a price associated with them. This causes an error when Adding the document. Sometimes, I can just change the quantity of one of the items, which forces the Doc Total to update. Most of the time this does not work, though. I end up having to restart the SAP client and then everything begins to work as it should.
This behavior is occuring on mulitple machines in our office.
Earlier in this thread, Rahul mentioned that they currency rounding was turned off and that this could be part of the problem. In fact, we were having issues with Currency Rounding and did turn it off not long ago. Rahul, can you explain better what you meant by "give the proper amount so that you can overcome the error..."
Randy Davis
Denver, CO
Edited by: Randy Davis on May 16, 2011 2:01 PM

The number of details is not matching with the total count.

Hi all, again stuck with the code.
There is a form where i have to populate all the details of few tables in excel & there is a report where i have to make count of all these details.
The problem here is the number of details that is populated in excel is not matching with the count in report, both have to match. There some problem in code, please help me in matching it.
The below is the 5 tables with the columns below.
Tables are ENQACEDTL, ENQACEHDR, ENQACMDTL, ENQACMHDR, ENQACSPEC:
The Names mentioned below the table's name are Column Names:
ENQACEDTL
ENQACEHDR
ENQACMDTL
ENQACMHDR
ENQACSPEC
ENQNO
ENQNO
ENQNO
ENQNO
ENQNO
ENQAMDNO
ENQAMDNO
ENQAMDNO
ENQAMDNO
ENQAMDNO
ENGREF
ENGREF
QTY
OFFREF
MINSL
ITEM
EPREPBY
ITEM
BRANCH
EINSL
FRAME
DEPT
RATING
DEPT
MTEMP
TECOLD
ENGREFTDT
ENCLIP
MKTREF
ETEMP
THE BELOW IS THE SELECT STATEMENT CODE FOR POPULATING DATA IN EXCEL:
SELECT ENQACEDTL.ENQNO, ENQACEDTL.ENQAMDNO, ......... (....ALL COLUMNS)
FROM ENQACMHDR,ENQACMDTL,ENQACEHDR,ENQACEDTL,ENQACSPEC
WHERE
ENQACMHDR.ENQNO=ENQACMDTL.ENQNO AND
ENQACMHDR.ENQNO=ENQACSPEC.ENQNO AND
ENQACMHDR.ENQAMDNO=ENQACSPEC.ENQAMDNO AND
ENQACEHDR.ENQNO=ENQACSPEC.ENQNO AND
ENQACEHDR.ENQAMDNO=ENQACSPEC.ENQAMDNO AND
ENQACMHDR.ENQAMDNO=ENQACMDTL.ENQAMDNO AND
ENQACMHDR.ENQNO=ENQACEHDR.ENQNO AND
ENQACMHDR.ENQAMDNO=ENQACEHDR.ENQAMDNO AND
ENQACEHDR.ENGREF=ENQACEDTL.ENGREF AND
ENQACMDTL.ITEM=ENQACEDTL.ITEM AND
ENQACMHDR.DEPT=:PROC_DEPT AND
ENQACEHDR.ENGREFDT BETWEEN :FROMDATE AND :TODATE
ORDER BY ENQACMHDR.ENQNO,ENQACMHDR.ENQAMDNO;
THE BELOW IS THE SELECT STATEMENT CODE FOR COUNT OF DETAILS IN REPORT:
SELECT ALL ACENQ.ENQACEHDR.DEPT, COUNT(ACENQ.ENQACEHDR.ENQNO) COUNT
FROM ACENQ.ENQACEDTL, ACENQ.ENQACEHDR
WHERE (ACENQ.ENQACEDTL.ENGREF=ACENQ.ENQACEHDR.ENGREF)
AND ENQACEHDR.LOCKE=1 AND
ENQACEHDR.ENGREFDT BETWEEN :P_STDATE AND :P_ENDDATE
GROUP BY ENQACEHDR.DEPT;
There is problem in join condition of 1st code that is in the "SELECT STATEMENT CODE FOR POPULATING DATA IN EXCEL":
Please help me to sort out this problem..
Thank You.
Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
Oracle Forms & Reports Builder 6i.

As Karthick points out, we cannot help if we cannot see your correct table structures (create table statements) and some example data and expected output (insert statements would be helpful). You're telling us there's a problem, but we cannot see what the problem is as you've not shown it. Just saying your query is not working is like me telling you my car is not working, but not telling you what the symptoms are. You wouldn't know where to start in fixing it.
Why are you using Oracle 9.2.0.1 ? Not only has that version been unsupported for about a decade, but 9.2.0.7 was the first version of 9i that was considered 'stable' as versions prior to that were considered buggy. So you're using an old, unsupported and buggy version of oracle. Seriously, you need to consider upgrading to a supported version, preferably at least the latest 11g version.
And what has oracle Forms and Reports got to do with the issue?
And please explain how you are getting your data out of Excel and presenting it to Oracle to be able to query against it. Excel does not have "tables", so your question is completely unclear how you are querying the data from Excel.

AW01N- Total of write up not matching with total of indivudual transaction

Hi,
While viewing any Asset via AW01N, the total of Write up transaction is not matching with the total of individual transactions displayed in same screen.(It displays only last transaction value in total of write up transcation)
We applied OSS note No. 762128 still the problem exists.
Please inform me if anybody has resolved this before.
Thanks
Prasad

Hi,
Please note that the determination of the costs behaves differently in
the itemization and in the cost component split.
In the itemization, each item is rounded separately, while in the cost
component split first the individual items will be added up and then the
value will be rounded. The differences can be avoided by increasing the
lot sizes.
Please review sap note 168238, which explains the systems behaviour
and check the solution.
To avoid the occurrance of this problem you should
- always cost the header material again if an ingoing component with
changed values is being costed.
- also cost all materials again following a price calculation for a
particular period.
Please do not forget:
The itemization view only displayed the itemization on that level,
while the cost component view will display the cost component split
from all levels.
Please review sap note 889474. Sap note 66900 also explain why
small differences arise between the itemization and the cost component
split.
I hope helps,
Regards,
MLM

The BW Total Stock Not Matching with ECC5 Total stock as on 31-08-2007

Similar Messages

Maybe you are looking for