The cable of my L-shaped charger has begun to split

My 15" macbook pro which I bought from the apple store in September of last year has begun to split at the neck. Is this covered in my warranty? How do I go about getting a new one? I bought the computer when living in Ireland but now live in Montreal, Canada. Will that affect anything?

I went in today to get this same issue fixed, only to be told that it was cause by my own doing!
I was furious, I went to speak to another apple employee (not at the genius bar) who agreed me. I even spotted another mac product suffering from the same problem in the store.
I'm not sure what to do now, but this is not what I expect from Apple at all. I payed a lot of money for this laptop and I expect the charger to last longer than a year!..Even if I do use it a lot.
Grr!!!
Any ideas?
Thanks

Similar Messages

  • HT1386 I have iTunes (up to date) and an iPhone 4s. When I connect it using the USB cable it does not appear in the top right corner. Other devices do and also the cable is fine as it charges and the PC sees it as a device. I've looked online and have no

    I'm new to this and I think I typed a long heading!
    Anyway the issue is I have iTunes and just updated it to the latest. I also have various Apple devices however my iPhone won't sync with iTunes. When I connect it using the USB cable it does not appear in the top right corner as does other devices. The cable is fine as it charges and also my PC sees the device. However it does not appear in iTunes so I can't sync music to it.
    I've searched the web but all asume iTunes can see the device.
    Help!?

    Hi David,
    If you are having issues with your iPhone not being recognized by iTunes on your Windows machine, you may find the troubleshooting steps in the following article helpful:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Regards,
    - Brenden

  • Hello. I recently bought an Iphone 5S. I tried to charge it with the original charger that came with the phone and it doesn´t work...The cable is good, I´m charging the phone via my PC. I read many answers posted here but no one helped me. Thanks in

    Hello. I have a new Iphone 5S and the charger taht came with the phone doesn´t charge my Iphone. The cable is good because I´m charging the phone via my PC. I tried every recomendation posted here but none helped me...I live in Argentina and we don´t have local support here, I would´ve ask for a new one but it´s not an option here. Does anyone know what can I do? Thanks in advance. Regards.

    I live in China as well and my iPhone5s is the model A1530 I bougth outside China. I have the same problem as Nikatnight with the iPhone while the iPad Air (wifi only) is working like a charm. It must be definitely something related to the carrier since I was abroad few days ago and everything worked well.
    If you pay attention at the source of your maps, you'll discover they are provided by AutoNavi instead of TomTom and make them appear in chinese with their own border interpretation. Queries are only acceppted in Chinese (p.e. if I type in english "Los Angeles International Airport"  it replies it cannot locate it)
    I suppose everything will be fine when you'll be out of censorship....
    Perhaps iOS  Apple Maps are absolutely useless for expatriate in China.
    Use Google Maps instead
    BTW, I'm surprised how much Apple might prostrate towards hard power Governments.... No matter what, money are always on top!

  • Can I use a "T" shaped charger?

    The charger to my A1370 MacBook Air just recently frayed out.  I'm a bit catious of buying another "L" shaped one, so I'm wondering if a "T" shaped one would be a good subsitute and which model of it to buy.

    First of all, you said "all the air models, except for the newest released a couple of weeks ago, use the MagSafe adapters, not the MagSafe 2."  That is incorrect, as shown here:
    MacBook Air (13-inch, Mid 2012) - Technical Specifications
    This spec shows that last year's MacBook Air also used the MagSafe 2.
    Anyway, that's not important for the OP's question.  What is important is that the new MagSafe 2 ("T" shaped) charger cannot be used with your MacBook Air that had a MagSafe ("L" shaped) charger.
    Apple has documented that in this page:
    http://store.apple.com/us/product/MD592LL/A/apple-45w-magsafe-2-power-adapter-fo r-macbook-air
    ... right in this area:

  • I get a error message "To charge faster, use the cable and device that were provided with this phone" when charging my Samsung Galaxy note 3. I took it to a store last week and they said it has something to do with the last software update.  They tried ch

    I get a error message "To charge faster, use the cable and device that were provided with this phone" when charging my Samsung Galaxy note 3. I took it to a store last week and they said it has something to do with the last software update.  They tried charging it at the store and got the same message. I was given another phone, I still get the same error with the new phone.

    Wowuor, 
    Thank you so much for reaching to us today. I want to make sure that we get the device charging the correct way. There is no physical or liquid damage to the phone or to the power cord correct? Did this error just start to appear as of last week? Please keep us posted. 
    KevinR_VZW
    Follow us on Twitter @VZWSupport

  • HT4061 My iPhone 5 has suddenly stopped charging even though I have used different cables and adaptors. The cables adaptors charge another phone so nothing wrong at that end

    My iPhone 5 has suddenly stopped charging. Have used three different cables and adaptors to no avail. The cables charge other phones so something wrong with the phone only. Need advice on possible solutions?

    Always try
    a reset then
    a restore first with back up then as new ,as required
    If still no improvement visit Apple Store genius bar
    BUT first check there is no debris in charging socket

  • There is a problem with the charging cable that wont let my iPad charge. it is probably the little usb thingy. it does charge when it is out of power, but as soon as it turns on it stops charging. anyone got a fix for it? mail me at simenrognli@hotmail.no

    My chargers little USB port probably is the fail. it lets my ipad charge only when it is completely out of power, but as soon as it turns on, it stops charging. Any tips on what i can do? The charger is new and has worked until today. i cant bring it to the store because it was bought in my neighbour country Sweden. Thanks in advance.

    - Try another cable.
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store. You can still go if your country has Genius Bars
      Apple Retail Store - Genius Bar                 

  • Please is an emergenci!!! I put my iPhone 5 to charge and the cable is not working I tried in other pluggers in the house but nothing I don't know what's wrong and I don't have any more battery

    Hey I plug my iPhone 5 and the charger is not working and I'm freaking out!!! It never hasn't happened and I just have in this moment 4% I all ready tried on pther pluggers on the house and is the charges that doesn't work. What should I do?

    @whimsei,
    Hello and thank you for posting back.  What it sounds like is the cable that connects to the screen from the motherboard has either come loose or has a issue after the fall.
    To fix this it would have to be opened up and the connections checked.  If there is an issue with the cable then it would have to be replaced.  This will require either you opening up the system yourself and checking the connections and tha cable or sending it in for repair.
    Here is the link to the maintenance and service guide.  If you feel comfortable doing the work it will help you.
    HP 2000 Notebook PC Compaq Presario CQ58 Notebook PC
    Maintenance and Service Guide
    If you want to send it in for repair here is how.
    Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    Please let me know how things go.
    Thank you again for posting and have a great day.
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    D5GR
    I work on behalf of HP

  • My daughters ipod 4th gen will no longer charge past 20% and will not connect to a pc in order to back everything up. the cable is working fine, otherwise it would not even charge to the 20%. i have tried the reset to not lose any data and no luck. help!

    my daughters ipod 4th gen will no longer charge past 20% and will not connect to a pc in order to back everything up. the cable is working fine, otherwise it would not even charge to the 20%. i have tried the reset to not lose any data and no luck, home+power for 10-15 seconds. I really would like to not lose everything she has, again, because I can't back it up this time. I have tried charging via a wall outlet and PC and both charge fine, just only to 20%. I am using the cable that came with it so no aftermarket issues there. Please help so I don't have to reset everything again.

    Because once it has charged enough to be powered on as soon as you turn it on it says battery is at 20% and will not charge anymore after that, it just runs for about 5-10 minutes before the battery dies again. The battery cycles discharge/recharge daily and its not on the charger at full charge for more than a couple hours and is never totally dead for more than a couple of hours.

  • "charging is not supported" when using the cable that came with ipod

    I get an error message that "charging is not supported" when plugged in using the only cable that came with my ipod touch. My ipod will charge for 5 minutes then when I check on it, I notice this error on screen and the ipod has stopped charging.  I'm using the same charging method I have always used since I owned this ipod which has been over 2 years now and this only started happening recently. I believe this started when I upgraded to 5.0.1.

    - Look at both partsof the 30 pin dock connector.  Log for bent. mising or corroded contacts of orther abnormalities. The cable could be bad.  Try a new one.
    - Try a reset. Nothings is lost.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.

  • HT201412 Hi I just got the I phone 5S and I can only charge it with the cable that came with it in the box , I have tried using other also original cables that came with my I pad mini or I phone 5 with no luck .

    Does The I phone 5s have a different charging cable ??

    Well, assuming all of the above, Notifications, etc., it just might be time for a visit to the Apple tore genius center for a session with the techs.  See if it is a fault in the hardware or just an iOS reinstall is the answer.
    One more thing you could try, backup so you have a record of content, then restore to factory conditions be an Erase All Contents and Settings.  Then restore from the backup you just made.  That has helped some with WiFi problems, may be it would work with your problems.
    But with that behavior of another app with problems, the geniuses looks like a less stressful thing to do.

  • Iphone 3gs is not charging nor detected by i tunes and computer shows 'One of the USB devices attached to this computer has malfunctioned and windows does not recognize it'

    Hello evi one .. My iphone 3gs is not charging and is not recognised by itunes .whenever i attach my iphone to my computer,it displays a message 'one of the USB devices attached to this computer has malfunctioned and windows does not recognize it ' . :-(  it do charging sometime with charger but does'nt by computer . kindly please tell me the solution .. thanks

    As I said above, some of the new lightning cables have been known to be causing problems for some users.  Have it replaced if at all possible by bringing it into your local Apple Store's Genius Bar.
    B-rock

  • I have a MacBook Pro 13inch 2.4GHz (Intel Core 2 Duo, 4Gb RAM, 250Gb HDD, NVIDIA GeForce 320M graphics, SD card slot, up to 10 hour battery life)bought in October 2010 in the UK. The charger has stopped working. Which model and voltage do I need please?

    I have a MacBook Pro 13inch 2.4GHz (Intel Core 2 Duo, 4Gb RAM, 250Gb HDD, NVIDIA GeForce 320M graphics, SD card slot, up to 10 hour battery life) bought in October 2010. The charger has been playing up for a while now - the light going out but coming back on when I move the cable a bit - faulty connection it seems. It has now stopped working at all.
    Apple UK charge a whopping £65 for a replacement - and the reviews are AWFUL for it!
    I need to know which one I need - 45w, 60w and 80w are listed - can someone tell me please? If I'm going to pay this price I want to make sure I get the right one!
    Also, is a genuine Apple one available on Amazon UK, does anyone know please?
    Any help will be much appreciated.
    Meanwhile my battery is going down.....

    Thanks for that wjosten. Much appreciated.
    I've read here on Apple's site that the 85W version will work, as you say, and that it would run cooler with a 13" Macbook - I have a 13" MBP of course but assume this would be the same with mine. I wonder if running cooler is a good thing (it sounds as if it is) and it would be better for me to get the 85W version than the 60W one?
    Then I have to decide whether to pay the (extortionate as it seems to me, though I may be wrong) £65 from Apple (bearing in mind the rotten reviews here of the Apple product), or risk a cheaper alternative from Amazon UK, at around £20 (also with various rotten reviews)... Any suggestions? Please? :-)

  • HT4623 My iPhone has suddenly stopped working. It now says the battery is dying and to charge it. After charging it for over an hour, there is no change. The power won't come on, and I am left with a blank screen advising me to plug my phone into the char

    My iPhone has suddenly stopped working. It now says the battery is dying and to charge it. After charging it for over an hour, there is no change. The power won't come on, and I am left with a blank screen advising me to plug my phone into the charger.

    Try different USB Cable, try different Charger. Clean iPhone charging port with clean dry toothbrush. If still problem and you have Warranty or AppleCare, make Genius reservation and take iPhone to Apple for resolution. If no coverage, most likely it could be battery or charging port assembly that need replacement.

  • Iphone 5 won't charge unless I wiggle the cable around to fine a spot where it works. It's not the cable/charger as it works perfectly in other iPhone 5's. I haven't even had it a year so it's still under warranty and the phone is in very good condition

    Iphone 5 won't charge unless I wiggle the cable around to fine a spot where it works. It's not the cable/charger as it works perfectly in other iPhone 5's. I haven't even had it a year so it's still under warranty and the phone is in very good condition and has never been abused/dropped etc. I'm taking it into apple tomorrow for an appointment. Has anyone had this problem? if so, what happens? thanks

    I had the same problem and took my iPhone 5 into the Apple store.  What happened was a little embarrassing.  The genius took out a "special tool" (a paper clip) and began digging out an unimaginable amount of lint from the lightning connector port.  After that I was able to connect the cord and charge without any issues. 
    A few days after, I realized that my problems associated with the remote/mic not working on my ear pods might be due to the same issue.  (The volume and action buttons on the ear pods sometimes were not responsive)  I grabbed a paper clip and began digging.  Again, a large wad of lint came out of the headphone port and my ear pods have worked perfectly since. 

Maybe you are looking for

  • Cluster design with subscriber 10.X on VM to exisiting MCS 7835I running with v8.6

    Hi At present CUCM is running with single node MCS 7835I (v8.6) in cluster. Now planning to implement cluster by building subscriber with version 10.X  on VM to existing MCS 7835I which remains as publisher.  Does cluster support dissimilar hardware

  • Using USR table with a datasource

    i have met with a problem recently which is i need to create a datasource which uses the USR table in the SAP server but till now i still cant find a way to do it so i'm hopping that i will be able to get some ans from here. thanks

  • Newbie:what is the time to call release() in the tag class?

    I found the tag will be only instance one times in the jsp server, so the private varable can be access by another request call. there are one release() method in the interface defined, however, I have ever saw any instance to call it explicity, righ

  • Signatures missing from email accounts.

    I have 4 email accounts: 2 gmail and 2 MS Exchange. For all accounts, I had set up signatures. With update 1.4, they got wiped out. Update 1.4.1 seemed to take care of the issue (still had to recreate all of them). Now, they are gone again (as of las

  • CMYK and Gray Color Space Conversion

    Hi All, I have read the Adobe Photoshop CS3 SDK and found Color Space Suite which will color conversion, but i can't able to find sample code. Can anyone guide how to convert color? or any sample? Regards, Selvakumar