The camera cannot be turned on or cannot be turned off even though I pressed the ON/OFF(Power) button.
Solved!
Go to Solution.
There are many reasons this problem can happen:
Make sure the battery is charging.
If you press the ON/OFF(Power)button too quickly, the camera may not be turned on.
If it is still not turning on or off, press and hold the ON/OFF(Power) button for at least 7 seconds.
Similar Messages
-
A pop up appeared and it doesn't disappeared even though I press the "ok" of the pop up and it doesn't let me do anything else. I can't even turn it off. What can I do?
This isn't the solution, but I would just let it run out of battery.
It would turn off on its own then just start charging it again
Hope this helped
-Griffin -
While uploading my I phone 5, I came to rescue e-mail step and I am stuck there I can not move forward even though I press the next button
annestenvad wrote:
I'm not able to run a test myself, right? I'm definitely going back to the repair store tomorrow!
Wrong! Check out KB Article: Intel-based Macs: Using Apple Hardware Test
Personally, I would not be running no test. Apple has a 90 day warranty on all their repairs. Return your computer to the repair shop but this time.......
When it’s time to pick up your computer from the repair shop:
*** Before you leave the repair shop, make sure you have the repair tech(s) power the comp up and demonstrate that it is indeed working & repaired properly too your satisfaction.*** -
When the ipod is ct isonnected to the mac itunes gives the message that there is an update to the os availible, when i click on update the message comes back that i tunes is up to date even though it was the update os button that was pressed, it is doing the same with my iphone, does anyone know where the conflic
The lates iTunes (10.5) requires Mac OS 10.5.8 or higher. You appear to be running 10.4.X. You will need to upgrade your Mac OS.
Stedman -
When I try to update my apps, I keep getting the message that there is a problem with my billing information even though this is the billing information I have always used in purchasing my apps. What do I do?
You probably need to confirm the security code of your CC. Log into your account an input this, even if it's already there.
-
How do i turn off iTunes match, it won't turn off even though it says it's off?
how do i turn off iTunes match, it won't turn off even though it says it's off?
On what device and why, exactly, do you think iTunes Match is not turned off?
-
hi i was watching a tv series on my iPad3 thru the app VIKI when it suddenly froze. I tried to turn it off by pressing the sleep/awake and the home button but it would not go.
Try reset a few more times.
Hold the Sleep and Home button down for about 10 second until you see the Apple logo. -
After typing a iMessage it won't send even though I press the send button
Whenever I type in iMessage and press the send button the message will not send
You did not say if the Send Button is greyed out but try this - Go to Settings>Messages>Show Subject Field>Off.
-
Ipod backlight doesn't turn off even though i hold the menu for 3 seconds
PLEAASER HELP
You need to get to the iPod menu and locate the "Settings". Select this and find & select "Backlight Timer", scroll & select "2" or "5 seconds".
If you want to shut down the ipod, hold the play/ pause button until the ipod shuts off, (usually a few seconds). -
I am used to firefox restoring my previous session if I get a computer crash or the computer reboots when MS Update runs. But this computer always starts a new session. Why? I have the option checked to restore previous session under General tab "Show my windows and tabs from last time".
I suspect this is because when FF launches I am not using the :default: session but I pick from a list.
If this is the case, how to I make my picked session the default one?
It is very annoying not having FF recover all my previously opened tabs. Other computers that I have these feature works fineHi phg728
see in the next link cor-el's / Chosen Solution :
https://support.mozilla.org/en-US/questions/937679
thank you -
I tried to rename a file, it gave me an error message (can't remember the number - 43??) and then the file disappeared from the original folder. When I do a search, the file comes up under the new name, but it does not show a path, and even though preview shows the contents, I can't open the document (Powerpoint) and I can't move the document. I tried "Copy" and paste but it doesn't work. I tried "Share" with Airdrop and iChat, but the file is inaccessible. When i try to rename the file, it says the filename is too long.
When I try to open it, it says the alias is not good, and asks if I want to fix the alias. I'm afraid to do that and lose all access to this document.
Right now, it feels like a ghost document - it is on the computer intact, but it is in an undisclosed location and inaccessible.
Please help!!I was able to resolve this by repairing permissions, even though no permissions error was listed specifically for that file.
I could also have recovered it through Time Machine, but I'm interested in knowing how not to have this happen again!
I was afraid of rebooting and possibly losing track even of the ghost.
I did not try EasyFind - I'll keep that in mind next time.
Thanks for all the comments. -
My mac will not recognise the camera on my iphone so i cannot move my photo's
my mac will not recognise the camera on my iphone so i cannot move my photo's. it has worked fine in the past. i recently moved itunes to an external hard drive and that will still connect for music etc. but the phone does not show up in finder at all the mac just keeps beeping and saying no camera found any ideas please?
Hi Sylvia's iMac,
Welcome to the Apple Support Communities!
It sounds like you need to reset the administrator password on your computer. Please follow the instructions in the attached article for information on how to complete this process. The article has instructions for Snow Leopard (10.6) and earlier, but there is also a link within the article for assistance in Lion (10.7) or later.
OS X: Changing or resetting an account password (Snow Leopard and earlier) - Apple Support
Cheers,
Joe -
I have an external hard drive that I would like to pre-make a new folder before I import photos into it. Even though I added the new folder app to by toolbar, it is not highlighted and I cannot use it. It will only let me create new folders if I upload to iPhoto. That is not where I want to store everything. So I need to figure out how to turn on or activate New Folder on my toolbar for all possible downloading options.
If it's a drive that you've previously used with a PC, just double-check the format - click the drive once on the desktop to highlight it, and click cmd-i (the command key and the i key together) to see the Info window. That will tell you, under Format, how it's formatted.
If it's "NTFS", that's the current Windows format. You can read but not write to it with a Mac. If you want full read/write access, you should look into Paragon NTFS, which allows you to do both. Note that some features of te Mac (Time Machine, for example) will only work with Mac-formatted drives.
Matt -
I cannot update or install updates on itunes. It says that the location for that file does not exist. I cant even uninstall itunes as the same error message comes up.
Hi vindog60,
Thank you for using Apple Support Communities.
To troubleshoot this issue where you get an installation error with iTunes on your Windows PC, please follow the steps in the article linked to below.
Issues installing iTunes for Windows - Apple Support
Cheers,
Alex H. -
Since installing the latest version of iTunes all my music files cannot be edited, and I cannot import new music files into iTunes. The messages says I do not have enough access privileges even though I am the administrator of the system. If anyone can help me sort this out I would be really grateful. I have checked the read and write privileges for all the iTunes folders and it all seems in order so I can't understand it.
In general, I am getting really frustrated with Apple. They seem to be getting ever more controlling in their approach to their consumers. I need to edit music file information as I am a dj. And why can't I import music, unless I buy it from iTunes? Most of all, why can't I use the devices I paid a lot of money for in the way I want to use them, and not be forced to coerced to use apple's fee paying services (iCloud, iTunes).
I have used apple computers since the early 1990's, but in the last year I have gotten rid of my iPhone and my iPad and replaced them with Android devices. Much better and much less control. Perhaps it is time to switch from Apple altogether.Hi
Read this About Disk Utility's Repair Disk Permissions feature
and OS X Mavericks: If you don’t have the correct permissions to open a file or folder
Does this help?
Jim
Maybe you are looking for
-
HELP! Illustrator CC Stained Glass effect issue
Hello. I'm relatively new to Illustrator. I'm designing a pair of shorts and have come across a problem. I'm using the stained glass effect to give the shorts a reptile look over a gradient green to black 90 degrees. When I select the stained glass e
-
New Line in data file for sql loader
Hi all, I have a requirement to load a data file in which some of the rows are in new line as given in following example. If i put a '\n' character in control file, then it will load only those records which have newline in them ignoring non new line
-
Dear all experts, I am new to ABAP. Can anybody please tell, how to use the exceptions in function module ? and if any exception happens, then how to link some messages to that exceptions? I will also like to know, how to create those messages ? <b>
-
Can I use a pictures file name as a title?
I have several master pages with 2 up, 6 up 9 up image boxes with a text box directly underneath. The file name of the pics are also the title of the picture. Can I drag a pic into the box and have the name of that file come up in the text box? Prefe
-
I am in the middle of the trial version of Contribute 3 and I am unable to edit forms that were previously done in Microsoft Frontpage. The error message I get is 'You cannot perform this action in this region of the page' . Macromedia support did no