The canvas is not showing up at all.
I'm using CS6 and have everything running as usual. I make a new file, normal size of my art and everything, but the canvas (background) does not show up. So I think.. "Huh, that's odd."
I also have navigator open since I use full screen. So as I draw strokes, I see them appearing in the navigator, but I cannot see the canvas. All I see is the colour of grey. Although the canvas is certainly there, since I can make visible strokes, it seems as if it were transparent, except I hadn't done anything with the image to start. Are there any solutions to this?
Thanks!
I can’t see my images and only get a black screen (or strange pattern).
Mylenium
Similar Messages
-
Some Devices are not showing up at all in the Discovery reports
Hi all,
The first time I ran the CS device discovery I got 50 reachable devices. I scheduled the Device Discovery to be run every week. I added more subnets to the discovery but unfortunately the last discovery shows only 31 devices from the first discovered devices (50). I checked the DCR and there is only 44 devices out of the 50!
My question is:
Should not the scheduled Device Discovery discovers all devices -the previously discovered ones and the new ones-?
Why the rest of the devices are not showing up at all in the discovery reports (neither reachable nor unreachable) although all of them are pingable and responding to the snmpwalk tool from the CWLMS server.
Your kindly respond is highly appreciated.
Thanks in advance.I ran the discovery again with the same settings after enabling debugging and I checked the following log files:
1. in the ngdiscovery.log I found a lot of errors all about Duplicate IpAddress example:
ERROR [DeviceManager : EvalTask-DiscoveryThreadPool-06 addNewDevice] : Duplicate IpAddress (127.0.0.51) found in addNewDevice().Device 1 ip = 10.8.113.29 , id1 = 127.0.0.51*F1COR.xyz.com*.1.3.6.1.4.1.9.1.283, Device 2 ip = 10.8.113.106 , id2 = 127.0.0.51*LCD.xyz.com*.1.3.6.1.4.1.9.1.283
ERROR [DeviceManager : EvalTask-DiscoveryThreadPool-08 updateDevice] : Duplicate IpAddress (127.0.0.51) found in updateDevice().Device 1 ip = 10.8.113.93 , id1 = 127.0.0.51*UDS.xyz.com*.1.3.6.1.4.1.9.1.283, Device 2 ip = 10.8.113.73 , id2 = 127.0.0.51*F2COR.xyz.com*.1.3.6.1.4.1.9.1.283
ERROR [DeviceManager : EvalTask-DiscoveryThreadPool-09 addNewDevice] : Duplicate IpAddress (10.8.113.42) found in addNewDevice().Device 1 ip = 10.8.113.42 , id1 = null, Device 2 ip = 10.8.113.86 , id2 = 10.8.118.251*OPS.xyz.sa*.1.3.6.1.4.1.9.1.501
2. in the CSDiscovery.log:
Error while changing the permission of the file C:\PROGRA~1\CSCOpx\objects\csdiscovery\1348\DiscoveryStatusObj
I checked the file and the casusers has a Modify permission
My Question is:
1. what is the meaning of those output exactly?
2. If CWLMS found duplicatedd IP address how it works in terms of (ignoring, updating existing devices, Adding the new devices, ... etc)
Many thanks for your help. -
Hi, I have a new iPad air, all of the photos from the cloud are not showing up. What do I need to do to get all my photos from the cloud onto my new iPad air? Thanks!!
Reset your device: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)
-
Recently, U2 music appeared on my ipod without my requesting it or wanting it. I was able to delete all of the songs except for one. How do I delete the last one from my ipod? The song does not show up in iTunes when I plug my ipod into the computer. The version installed on my ipod is 7.1.2(11D257).
Hi donfrommars,
Welcome to the Apple Support Communities!
Please use the following article for information and instruction on deleting the U2 album from your devices and account.
Remove iTunes gift album "Songs of Innocence" from your iTunes music library and purchases
Have a great day,
Joe -
Calculate result as average in the report not showing average for all
Hello,
I have a calculated key figure in the query where its result should show average. I have made a setting for this calculated key figure as:
1. Calculations tab: Calculate result as "average" and calculate single value as "nothing defined"
2. Aggreagation tab: exception aggregation: Total and reference char: []
Now coming to report, BEX it showing correct average for all cells but when i run it in portal few values it is showing correct average but for few it is showing as blank. I exported this to excel then cell shows blank but cell has some values in the custom format and display values when i change the format to general from "format cells" option.
Please help me in resolving the issue- why portal not showing value for all.
Thanks,
VijayaSAP note solved the purpose.
Thanks & Regards,
Vijaya -
Sometimes when I copy a CD into iTunes all of the songs do not show y up in one album, but mutiple albums, all with the same name. Is there an easy way to get all of the songs into one album.
Generally adding a common album artist will fix things.
tt2 -
Hello,
I have a problem with my iPhone. The default wallpapers are not showing up. All I see is a black screen. Can someone tell me what has to be done?Go to the Home screen with one press of the home button. Then double press the Home button. When the Dock raises, tap and hold one of the app icons untill they all start jiggling and a red X appears. Tap the red X on the video app to quit the app.
-
It shows the log sequence not found error while all the log seqences exist?
Why the database shows the log sequence not found error while all the log seqences exist?
SQL> select*from v$log_history;
RECID STAMP THREAD# SEQUENCE# FIRST_CHANGE# FIRST_TIM NEXT_CHANGE#
RESETLOGS_CHANGE# RESETLOGS
1 657328345 1 1 519368 13-JUN-08 543434
519368 13-JUN-08
2 657370849 1 2 543434 13-JUN-08 567705
519368 13-JUN-08
3 657373012 1 3 567705 14-JUN-08 570408
519368 13-JUN-08
RECID STAMP THREAD# SEQUENCE# FIRST_CHANGE# FIRST_TIM NEXT_CHANGE#
RESETLOGS_CHANGE# RESETLOGS
4 657373039 1 4 570408 14-JUN-08 570464
519368 13-JUN-08
5 657374623 1 5 570464 14-JUN-08 573505
519368 13-JUN-08
6 657375015 1 6 573505 14-JUN-08 573856
519368 13-JUN-08
RECID STAMP THREAD# SEQUENCE# FIRST_CHANGE# FIRST_TIM NEXT_CHANGE#
RESETLOGS_CHANGE# RESETLOGS
7 657376537 1 1 570465 14-JUN-08 573543
570465 14-JUN-08
8 657377084 1 2 573543 14-JUN-08 575109
570465 14-JUN-08
9 657377094 1 3 575109 14-JUN-08 575114
570465 14-JUN-08
RECID STAMP THREAD# SEQUENCE# FIRST_CHANGE# FIRST_TIM NEXT_CHANGE#
RESETLOGS_CHANGE# RESETLOGS
10 657377103 1 4 575114 14-JUN-08 575121
570465 14-JUN-08
11 657377106 1 5 575121 14-JUN-08 575123
570465 14-JUN-08
11 rows selected.
RMAN> flashback database to sequence=10 thread=1;
Starting flashback at 14-JUN-08
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=155 devtype=DISK
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of flashback command at 06/14/2008 13:03:15
RMAN-20206: log sequence not found in the repositoryApart from the output being hardly readable (please refer to the FAQ in the right upper hand corner how to post output), I don't see any sequence 10.
You seem to mistake the column recid for the sequence column.
The sequences are listed in -not surprisingly- the sequence# column.
Sybrand Bakker
Senior Oracle DBA -
I did all the following step to enable the dictation on my ipad3 but the icon is not showing on my keyboard. can I get some help
Dictation is not available on the iPad 2 (your profile says iPad 2)
-
When I select a title or lower thirds and try to enter text by double clicking on it I cannot enter any text at all. Also the text area box does not show up at all where you can enter text also.
It's a bit hit and miss, Walter. Sometimes the box to enter text shows up straight away in the inspector under "text". Other times, although you click "text" in the inspector, there's nowhere to actually write anything.... then what you have to do is move the trackbar over the Title Box until you see the text boxes in the main Viewer. In the Viewer, double click a text box.... you can enter text there, but it's a bit flaky, but when you've clicked in it, you'll find that under "Text" in the inspector, the box for inputting text has magically appeared!
I'm not sure if anyone else has this trouble, but it is a bit of a pain! -
I purchased songs from iTunes Radio on my iPhone, but now the only place they will show up is in the iTunes Store app on my phone, even after syncing to my computer a million times, the songs do not show up in my library or anywhere else. My phone is not syncing properly, I wanted to add another playlist to it that I created on my Mac. I pluged in my phone and made sure the playlist I wanted to add was checked to be on my phone when I synced.
The playlist I wanted to add was "Country." It is clearly checked. I also wanted to add the "Recently Added" playlist, which I also checked before sycing. Currently, my phone only has the "Purchased" playlist and my "All Songs" playlist on it. When I hit sync, iTunes added another playlist automatically added another playlist to the list above and checked it. It was titled "ALL SONGS 1" and had ten fewer songs in it than the playlist I had created, "ALL SONGS" had. This playlist, however does not show up on my phone after syncing, nor does "Country" or "Recently Added." (Every time I sync, another playlist is created as "ALL SONGS 2, 3, 4, etc.") One of the songs (I have not, yet checked the other songs) that I purchased from within iTunes Radio shows up in the "ALL SONGS 1" on this screen:
But does not show up anywhere else. This playlist does not show up anywhere but the two screens above. The ALL SONGS 1 or 2 playlists do not show up here:
When I search for those song in my library, it shows that I do not have them:
But if I go to the iTunes store, I get the play button and not the price of the song:
This is what things look like from my phone's side of things:
"Summertime Sadness," one of the songs I bought from iTunes Radio, does not show up in the iTunes store under purchased "All" or "Not on This iPhone"
But, it does show up under "Recent Purchases"
Also, this is what playlists are on my phone after syncing a million times:
Only what was on there before I started any of this. "Summertime Sadness" and the other songs I bought from inside iTunes Radio, do not show up in either of these playlists. Please, help me.Hi Petrafin,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
You can download your purchases directly to your computer.
Downloading past purchases from the iTunes Store, App Store, and iBooks Store
http://support.apple.com/kb/HT2519
Cheers,
- Judy -
I have my PC on, then plug in my iPad (which is on) and open iTunes. The iPad does not show up in the sidebar. How do you get it to show up so that I can select the iPad and then configure the sync settings in each of the settings panes....hoping that these actually show up.
In the manual it says "log in to your computer user account before connecting iPad". I am the only user of this PC...does this mean some other user account. I am confused. I need "baby steps" to tell me how to do all this....very senior and just learning about this wonderful machine. I will very much appreciate your help.If you are the only user on your computer you probably don't have multiple user accounts set up and can disregard that. If you are using iTunes 11 go to View>Show Sidebar. Now see if your iPad appears under Devices on the left side when you connect it. If it does, click on the name of your iPad on the left side and your iTunes sync settings options will appear in folders with tabbed headings to the right.
If it doesn't appear on the left side, follow the troubleshooting steps shown in this article: http://support.apple.com/kb/TS1538. -
HT4759 change do not show up on all my divices like contacts
change do not show up on all my divices like contacts
Are you saying that changes to your contacts are not syncing to your other devices? If so, you need to make sure that the contacts you are changing belong to the iCloud account. To do this, open the contacts app on your device and tap Groups. Do you have any non-iCloud accounts listed, such as On My iPhone, Gmail, Yahoo or an exchange account?
Also go to Settings>Mail,Contacts,Calendars>Default Account (in the Contacts section). Do you have the Default Account setting there, and if so, what is selected as your default account. -
Why is my website not showing up AT ALL in Google?
I uploaded my website at the beginning of this week and it's working OK, but not showing up at all in Google. It is not so much an SEO question, because even if I google the exact website, it still doesn't show.
I have no idea what I did wrong, but I assume it's a meta data issue. What should I have filled out in the HTML for <head> box? It's blank now.
Thanks!!!You didn't do anything wrong most likely. It takes time to get indexed. Could be months depending on how your site is optimized, your content and traffic you generate to it.
-
Accordion not showing up at all in IE6
I have a standard accordion set up at
www.taradeal.com/pow.html
and it works fine in Safari and Firefox, but does not show up at
all in IE6 (the initial load of the text bits flashes up, but the
Spry re-work of the code seem to fail). I'm using Spry 1.6.1,
freshly updated for DW CS3.
The accordion display a standard RSS XML.
Here's some code:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01
Transitional//EN">
<html>
<head>
<meta content="text/html; charset=iso-8859-1"
http-equiv="Content-Type">
<link rel="alternate" type="application/rss+xml"
title="RSS" href="pow-rss.xml">
<script src="SpryAssets-xpath.js"
type="text/javascript"></script>
<script src="SpryAssets-SpryData.js"
type="text/javascript"></script>
<script src="SpryAssets-SpryAccordion.js"
type="text/javascript"></script>
<script type="text/javascript">
<!--
var powrss = new Spry.Data.XMLDataSet("pow-rss.xml",
"rss/channel/item",{sortOnLoad:"pubDate",sortOrderOnLoad:"descending"});
powrss.setColumnType("pubDate", "date");
powrss.setColumnType("description", "html");
//-->
</script>
<link href="SpryAssets-SpryAccordion.css" rel="stylesheet"
type="text/css">
</head>
<body>
... some table code
<div id="poems" spry:region="powrss" align="left">
<div id="Accordion1" class="Accordion" tabindex="0" >
<div class="AccordionPanel" spry:repeat="powrss">
<div class="AccordionPanelTab">{title}</div>
<div
class="AccordionPanelContent">{description}</div>
</div>
</div>
<script type="text/javascript">
<!--
var Accordion1 = new Spry.Widget.Accordion("Accordion1", {
useFixedPanelHeights: false });
//-->
</script>
</div>
...some more simple display, and a Google tracker
</body>
</html>
Thanks for any pointers on what's wrong.
-danWell, it seems to be a bug in the handling of the XML file
contents. I fixed it by changing the code in SpryData.js to force a
"manual" parse of the XML code. Not a good solution, but I don't
know the codebase well enough to find the root of the problem. I
know that the firstChild.nodeValue is "Object required" but I can't
figure out who sets that and why. Maybe no ActiveX object?
http://www.taradeal.com/pow2.html
still broken in IE6 if you want to check it
http://www.taradeal.com/pow.html
uses changed code and dynamic-data accordion works
Spry.Data.XMLDataSet.prototype.xhRequestProcessor =
function(xhRequest)
// XMLDataSet uses the responseXML from the xhRequest
var resp = xhRequest.responseXML;
var manualParseRequired = true; /*** DC for IE6 **/
Maybe you are looking for
-
Hey all, I'm going to be getting a mac mini for xmas and I'm not sure of the best way to network my internet connection. At the moment I have orange broadband unlimited and this is connected to my pc via a phone line > thomson usb modem and a usb por
-
How to execute a 'Find' in all Methods of a component
Hi, I have a really basic question about the usability of Web Dynpro. Is there any kind of <b>Search function</b>, as the binocular icon provide in the Class Builder or Function Builder. This is an absolute requirement in any Development tool. I just
-
Create PDF from scanner using 8 and 10.5 or 10.6
Just curious what the solution is for Mac Acrobat when trying to create a pdf from your scanner. I understand the Mac OS 10.5 + 10.6 changed it's twain support. Once or twice I've create a pdf from a epson 1660 perfection scanner using Mac OS 10.4 U
-
"Can you please help me? I don't know what to do! It says that "There were problems downloading a purchased item" what should i do? (It isn't internet)!!! Thanks!
-
I keep loosing calendar history, what am I doing wrong
I got my iPad and iPhone around February and have noticed a few times that the calendar history vanishes. At the moment I only have the last two months. Where has the rest gone? Do I need to change something in my settings? Can I get it back? Help ap