The Case Of The Disappearing Airport Express

All went well until I tried to update software to my Airport Express (AE). After the update I cannot find my AE no matter what I try. Multiple scans lead to the same end result.....nothing. Prior to the update the AE was discoverable with no problem. Any help appreciated.

Aquatic999,
Few things to try:
Shut down the Express for 5-10 minutes and power up again.
Restart your computer.
If you are trying to "see" the Extreme via wireless, use an ethernet cable between your computer and the Express.
If you still cannot find the device, you will need to do a hard reset by holding in the reset button until the amber light blinks rapidly.
Last resort is pulling the power on the Express, hold in the reset button and CONTINUE to hold it in while you power it back up. Release the reset button after approximately 10 seconds.

Similar Messages

  • Will I be able to extend a dual band network from a Time Capsule 2nd generation with the new Airport Express on both bands?

    My Time Capsule 2nd generation is the main accesspoint in my house. It resides on the second floor in our living room. On the first floor in our kitchen I have an fairly new Airport Express that extends my network on the 5 GHz band and allows me to stream music via Airplay. I had to choose 5 GHz since the 2,4 GHz band is interfered when using the microwave oven. However, we have a rather old house with loads of metal in the concrete walls and therefore the 2,4 GHz signal from the second floor proivded by the Time Capsule is hardly available on the first floor. Since all our iDevices (iPhones and iPods) operate at the 2,4 GHz band we sometimes don't have a proper wi-fi connection. I had tried before with another (older) Airport Express that only operated at the 2,4 Ghz band, but I could get a proper connection between the Time Capsule and the Airport Express. Therefore I think it would be the best solution if the new Airport Express would provide both bands simultaneously.
    If I replace my existing Airport Express with the new one, will I be able to extend my network on both bands?

    It sounds like you may have configured your Time Capsule to use a separate name for the 5 GHz network and then setup the Express to extend that specific band.
    In order to extend both bands, the Time Capsule setup will need to be changed so that both bands are using the same name. In other words, you would uncheck the option for the 5 Ghz name.
    Then, setup the new Express to extend the Time Capsule network.
    This is the only way that they Express can extend both bands. It cannot extend both bands if you have assigned a separate name to the 5 GHz network since you will be forced to choose either the 5 GHz band or the 2.4 GHz band for the Express to extend.
    How the microwave oven will affect this is not known. This will one of those things that you have to try in your home to know if it will work well, so it might be a good idea to understand the store's return policy before you buy....in case things do not work out as hoped.

  • How do I install a new airport express and link a second airport express to extend the network of the first airport express?

    I currently have a linksys wireless router attached to the Internet.  I have an A1264 Airport Express connected by Ethernet to the linksys router.  I have two network names, one for each wireless network.
    I purchased a new A1392 Airport Express to replace the linksys router and join to the A1264 Airport Express, and I want to have one network name as a result.
    How do I do this?  I realize that I have to reconfigure the A1264 device so that it is an extension of the A1392 device.

    You have a fairly complicated set up, so I suggest that it would make sense to tackle things in stages, testing each stage as  you go, before proceding to the next stage.
    Stage 1 would be setting up the A1392 first to the cable modem, and then making sure that everything is working correctly on the A1392 Express
    Stage 2 would be adding the Netgear switch and testing each port with a laptop connected via Ethernet to make sure that everything is operational on the switch
    Stage 3 would be connecting the A1264 Express and testing to make sure that it is extending the network correctly
    Stage 4 would be adding other Ethernet devices to the Netgear switch and testing each one at a time before adding the next device. There is some question about whether an iOS device can print to an Ethernet connected printer....even if the printer is AirPrint compatible. You may need to connect the HP using wireless...not Ethernet....to gain full AirPrint functionality, or use another application that will allow printing like Printopia or Print Central using the Ethernet connection on the HP.
    Stage 5 would be adding the printer to the A1264 AirPort Express.
    You do not mention how the printer will connect to the A1264 Express, but I assume that it will be USB from your description.  Most printers will work, but you really will not know if your printer will work until you try.
    Remember that only printing will be supported at the USB port of the Express. If you have an all-in-one type device, scan, maintenance, and other advanced features will not be operational whent the device is connected to the AirPort Express.
    If you want to print from an iOS device like an iPad or iPhone, plan to add additonal software like Printopia or Print Central to possibly allow this function. There are no guarantees here as far as the iOS devices.

  • Hi..I have an AirPort Extreme base connected to my DSL Modem and has been working fine. But I recently bought another DSL modem along with the latest Airport Express. With this one however I can't get it to connect to the Internet. Any suggestions?

    Hi..I have an AirPort Extreme base connected to my DSL Modem and has been working fine. But I recently bought another DSL modem along with the latest Airport Express. With this one however I can't get it to connect to the Internet. The light on the Express is flashing green though. Does it mean I have to re-set the settings on Airport Utility? I.e. the old settings haven't been cleared yet. Any suggestions?

    Let's see if I can get this straight.
    You have an Airport Extreme base station that is set to "Create a wireless network" and you have the box checked for "allow this network to be extended"....
    Then you have an Airport Express that is set to "Extend a wireless network" which you selected the name of your network in the box...
    Correct?
    See this Apple document:
    http://support.apple.com/kb/HT4259?viewlocale=en_US&locale=en_US
    The wireless unit on the right of the diagram can be either of the newer Apple base stations.
    Extreme, Express, Time Capsule

  • Trying to connect my wired PC to the wireless airport express via the wireless router.

    Trying to connect my wired PC to the wireless airport express via the wireless router.  TP-link wired/wireless router.  Ultimate goal is to send music from iTunes on PC to wireless router, then to airport, then to reciever.  The amber light is blinking.  Thanks in advance for the help!

    If I'm understanding right your need and your computer has wired access to your network/router, all you have to do is give your AX wireless or wired access to your network too.
    Wired should be easier.  Just use a network cable to connect to the router.  Power up the AX and look for it on AirPort Utility, do so without changing any of your computer settings.  If it's visible, then on iTunes your AX should be visible on the AirPlay icon at the bottom-right corner.
    If you want to connect your AX to your router wirelessly I would suggest to reset your AX settings by pressing and holding for a few secs the reset button next to all the ports.  Once it is reset, using your computer try to look for the wireless network it'll be creating, it should be something like Apple Network 4341eb.  Join that network and, using the AirPort Utility, configure your AX as a network client.  Go to Wireless > Wireless Mode: Join a wireless network.
    Select your router wireless network from the drop-down menu, select the appropriate security and type in your password.  Click update.
    It'll restart and automatically join your network.  Have your computer join back your router network and, again, in iTunes bottom right you should be able to see the AX speakers.
    Let me know if this worked.
    Jorge...

  • So does the Apple Airport Express take the place of the "Charter" modem and router we already have in our house?

    We purchased the Apple Airport Express and in our home have 2 iPads, 2 iPhones, 1 iPod, 1 MacBook, and two *D* computers and a Brother printer along with Apple TV and a projector.
    1. How do we get them all to mirror the content of the various devices onto the TV or the projector?
    2. Can we now unplug the *Ch* equipment from our cable source and plug in the airport express?
    Putting all the pieces together is just a little beyond us at this moment. Maybe it will click with a little help. Thanks!
    "Stuck" in Montgomery

    I'm pretty sure you will find that the Airport Express will not work with your router unless it's an Airport Extreme Base Station.
    You can do two things with the Airport Express. You can connect it by USB or Ethernet cable to a device like a printer that does not have wireless capability and provide a wireless connection to your router provided the two devices will "talk" to each other.
    You can connect it to a Mac to provide audio streaming wirelessly.
    You may be able to use it with your projector provided it has its own wireless capability, but I don't know if an Airport Express will stream video. Same for your TV.
    In fact for your home I'm not sure the AEX would be of much use except to connect to your Mac in order to stream audio to another wireless device in your home. But only if you can get the AEX to work with your router or replace the router with an AEBS (which you could only do if your current router is a discrete device connected to your Charter cable modem.)

  • In my iPhone  wifi screen the setup airport express is  not visible  how I turn it visible in my wifi page

    I'm not see in my iPhone 4s in the wifi the setup airport express the only see the wifi connections and ask to join network  I don't see the setup screen how I charge this in the wifi options

    To administer the AirPort Express, you need to install the iOS version of the AirPort Utility. You can get it via the App Store app on your iPhone.

  • HT4259 I have the old airport express but my iPad 3 is not able to connect to it even with the app downloaded. What can I do?

    I have the old airport express but my iPad 3 is not able to connect to it even with the app downloaded. What can I do?

    Use a windows computer.. or ask a friend to bring a windows laptop and use the 5.6 version windows utility.

  • Using my Actiontec modem's wifi, it doesn't find my new airport express.  When I use the new airport express network I created error message says ip address is wrong.  Help setting this new airport express up

    Using my Actiontec modem's wifi, it doesn't find my new airport express.  Using the new airport express network I just set up it says the ip address is invalid.  What can I do to overcome this blinking amber light and error messages?

    You need to begin by configuring the AEX to Join an existing network (Bridge Mode.) You can then connect to it using Wi-Fi, but the AEX will not extend your existing network.
    If you can connect the AEX to your existing router using Ethernet, then you could use it to Create a new network. Otherwise, if you want to extend your existing network you will need to get a Wireless Access Point - WAP - from a non-Apple product like D-Link.

  • Using both the printer and AirTunes on the same Airport Express

    Can I use the same AirPort Express to print wirelessly and have AirTunes hooked up to it also. Or would I have to get a separate AirPort for each use.

    Yes. There may be a hiccup due to bandwidth use if you print while streaming. But the answer is still yes.
    Welcome to Apple Discussions!

  • I am trying to install a second airport express to extend my network. When I use the aiport utility it does not see the second airport express.

    I am trying to install a second airport express to extend my network. When I use the aiport utility it does not see the second airport express.

    Suggest that you perform a Factory Default Reset as follows:
    Pull the Express from power
    Wait a few moments
    Hold in the reset button and keep holding it an additonal 8-10 seconds while you plug the Express back in to power
    Release the reset button and allow 40-45 seconds for the Express to restart
    Apple's instructions to do what you want are here:
    It will often help to temporarily connect an Ethernet cable from your Mac to the AirPort Express for the setup. Once the Express is configured, you can disconnect the Ethernet cable and move the Express to the desired location.
    http://support.apple.com/kb/HT4259
    Although an AirPort Extreme is shown as the extending device in the example, the setup for an AirPort Express is exactly the same

  • I have the airport express as router can I buy the new airport express and use my old airport to extend my net?

    I have the airport express as router can I buy the new airport express and extend my net?

    Things can get confusing pretty quickly since there are 3 different versions of the AirPort Express.
    If by "old", you mean you have Model No A1084 or A1088 AirPort Express (look at the label on the side of the device for the Model No), it cannot be used with the "Extend a wireless network" feature of other newer Apple routers.
    If your AirPort Extreme is "square" shaped with rounded corners, then the "old" AirPort Express will not work with your AirPort Extreme using the "Extend a wireless network" settings.
    You could use a "previous version" AirPort Express, Model No A1264 to "Extend", or the "new" AirPort Express, Model No A1392, for that purpose.
    If your AirPort Extreme is a simultaneous dual band product, then the "new" Express would be able to "extend" both bands.  The "previous" AirPort Express (Model A1264) would be able to extend only one band, since it is not a dual band device.

  • My Iphone will not accept the Apple airport express as the Wi fi network so I can facetime, how do I fix?

    My Iphone (I have a 4s and 3G) will not accept the apple airport express as the wi fi network so that I can face time. How do I resolve this?

    What are the exact specifications of the wireless network you've created? (If you're not sure, open Airport Utility on your computer and check the Radio Mode in the Wireless tab). Bear in mind:
    - iPhones earlier than the iPhone 4 cannot connect to an "n-only" network - they need b/g compatibility.
    - No iPhone can connect to a 5GHz network (Compatibility mode will also fix this).
    Matt

  • I can´t connect the internet - airport express + windows xp pack3

    I have a problem to connect the internet in my computer (system Windows XP Pack 3) using Air Port Express. My roommate has a mac pc and everything was easy, but in my case it was not. I tried to use the “Airport setup assistant for windows” and nothing, I tried to update my wireless drivers and nothing. I tried to configure the wireless by hand, because it was not able to find automatically the airport base station. But, maybe I´m using incorrect IP and gateway values. I don´t know what else I can do to solve my problem. Sometimes, the internet symbol is on (when I configure ip value by hand), but when I open firefox or internet explorer … it is not connected.
    Oh… please, help-me!
    Thanks.
    p.s. PC = Acer Aspire 5315, 802.11b/g wlan

    I have the same problem. My iMac talks to the Airport Express with no problem, but my PC Laptop (running Windows 7) appears to connect but I can't use the internet - same issue as the first post in this discussion. I'd love to hear from someone who can help. Apple doesn't seem to be able to provide support on this one...

  • Can the new AirPort Express Base Stations be daisy-chained?

    I have to create a wireless network over a considerably large space (an entire museum), and was previously under the impression that I could endlessly extend the signal from my AirPort Extreme using a series of AirPort Expresses.  In fact, the Apple Store Business Team led me to believe this.  I have purchased five Expresses (three of which are the new Base Stations, one is the slightly earlier version (801.11n), and one is older (801.11g). 
    I am now aware that I cannot simply "extend" the network more than once, and that with older models you had to use WDS to relay the network to remote AirPort Expresses.  But can even this be done with the new base stations?  Airport Utility 6.0 seems to provide much less functionality than the ealier versions.  I still have one macbook with Airport 5.x, thankfully, although it still doesn't make it clear how to change the Express into a WDS relay.
    I never would have bought these products if it was clear that you could only really extend the network by 50 feet in any direction.  Hopefully, this isn't the case.
    Thanks,
    -mf

    Thanks, Shawn, although I'd looked at that article before and I still have the same questions:
    - It says "WDS is designed for 802.11g, and shouldn’t be used for 802.11n devices. Wi-Fi base stations may include AirPort Extreme (802.11g) and AirPort Express (802.11g)."  Is this truly prohibitive, or just a suggestion?
    - It also includes steps such as "From WDS Mode, select WDS remote."  I see no such options in AirPort Utility 6.0, nor can I find them in version 5.6.  Am I missing something, or do the hardware upgrades (to 'n') mean that Apple software won't support WDS at all anymore?
    -Mike

Maybe you are looking for