The case of the mysterious hidden content - second hand iMac

Dear people with more knowledge than me... (i.e. dear everyone...)
I have recently purchased a second hand intel iMac (late 2006 model) to replace my trusty (but noisy) Powermac G4 Mirror Door Drive. It was purchased 'wiped' with a fresh install of Lion.
I used Carbon Copy Cloner to create a backup of my old hard drive (or at least the 60GB partition of it that I was using - I had Tiger installed on it) and then used the Migration Assistant to re-create an image of Zion in the wide expanses of the new promised land (250GB capacity).
All seemed to go well (but time consuming - it took several days to port everything to/from my USB external hard-drive). A few days later, when I checked About this mac I was shocked to discover that I only had 5GB of storage remaining.
I did a little poking about and realised I had left a couple of user profiles hanging around during my pre-Migration Assistant faffing. These duplicated much of what I had later migrated over more comprehensively, so I deleted these additional user profiles and this freed up a further 58GB or so.
My system information now tells me that I have
249.2 GB Capacity
63.69 GB Available
185.5 GB Used
The used component consists of:
Audio 137.47 GB
Movies 7.03 GB
Photos 9.74 GB
Apps 3.34 GB
Backups 0
Other 27.94 GB
However, when I go through all my available files and folders using the Finder, the grand total of space that I have used comes to around 88GB:
My home folder (the only user profile I didn't delete) 42.98 GB
Desktop 4.09 GB (I know, I know, clean your room...)
Applications 2.31 GB
Documents 2.8 MB (yes MB)
Movies 0
Music 38.59 GB
Photos 385 KB (yes KB)
Total ± 80GB
Leaving aside for a moment the fact that the disk partition I Migrated over was only 60GB in total (?!), where on earth are the other 97.5 GB of files, and how can I see/delete them to free up drive space I thought I had...?
...I imagine that the audio, movies etc., that are unaccounted for actually belong(ed) to the previous owner of the iMac. What I don't know how to do is see/access/delete them to free up disk space. There are no additional users other than my own account that I can see. That's not to say they are not there.
What can I do?
Thank you in anticipation of any help or advice.
v

verdelay wrote:
the (hidden) folder _CCC Archives takes up a whopping 107 GB, much of which consists of multiple copies of the same audio files (due to poor file management and copies of copies, I think..). I'm now looking for a utility that will be able to locate and list duplicate files so I can verify that the _CCC Archives folder files are replicated elsewhere.
I use CCC, but not the "archive" feature (since my main backups are made with Time Machine). 
According to it's Help, that folder contains the backup copies of files that had been changed on the "source" drive. 
But this large folder is on your internal HD, right?  Here's what I think happened:
When you made the original CCC clone from your old Mac, you selected the option to "archive" the copies of things that had been changed.  For some period of time, it did that.
Later, when you used Migration Assistant, it copied all those old files from the clone (via the Other files and folders on <HD name> option) back on to your new internal HD.
So yes, the files there should be prior versions of things on your system.
There are various options to have CCC manage those files.  You can assign a certain size to it, and it will delete the oldest files when necessary to make room for new ones;  or "prune" files after a specified number of days, etc.
Click Help in the CCC menubar, then CCC help, then review the Backup and archiving settings section:

Similar Messages

  • The Case of the Disappearing Clones

    Ok, here's a new one for me.
    I was cloning a cloud edge, and examining my work. The History palette was blocking my view, so I moved it. Instead, it jumped to the palette bar. Brought it back and tried to move it again. Same thing. Huh? I opened it for the third time, carefully clicked on the top of the History  and this time it moved off the edge of the image. But look! The clones have disappeared from the image, but they are still present in the palette! I ran back and forth up History and nothing. There they are in History, there they aren't on the image. Not a big deal, redo the clones. Looks better than before anyway, but still, where are the first ones?
    (Yeah, I know. Dual monitors and all that. But consider if I have dual monitors, this puzzle never would have appeared! Or would they?)
    Win7 64, CS5 with all the patches.
    Oh, and Happy New Year.

    Thanks for getting back Noel.With a name like yours, tis the season!
    Last first. Nothing wrong with dual monitors except for my cramped desk space. I probably will change that as soon as any of my potential clients actually materializes. Been quite slow!
    So far as screen shots and such, it would have been nice had I anticipated this event, but there it was and I had to write down what I could recall as to the steps leading up to the event. Saving it would lose history so I proceeded rather slowly to try and glean whatever I could.
    Now, a variation on this occurred about an hour later. This time I was using the Burn Dodge tool. I flattened the file first, then proceeded to use the tool, and suddenly noticed that nothing happened when a went backwards through history, as if I didn't actually burn anything. The setting for the brush looked ok, and then I noticed that the file is no longer flattened! WTF! I was deliberate in doing so, and even if I went back to before flattening in History, flattened should be visible and available as I drop down through History. According to History, I never flattened it. This could also be the case in the first instance. I thought I had flattened it but it wasn't. I assumed I didn't flatten.
    At this point, I have to consider that a prefs reset is adviseable, but before doing that, I really want to see if I can replicate either event. So far, no dice.
    I checked the History setup to see if non-linear History was checked and it isn't. But it sure seems like it is.
    One unusual condition is that last night, before going out for New Years, I saved my work but left PS running with the file open. So, this morning, I proceeded to do the little detail work on the open file as I intended to run some test prints.
    That's when it all started.
    Note: as I am writing this, I'm also checking out the app. I just tried to open PS. The icon in the tray showed PS is not running, but I cannot open it. The executable doesn't run. I've seen this before in Win7 and I usually open Task Manager and shut down the program. I see this on any number of programs, like even Fire Fox. But this time I noticed two versions of PS running. I didn't think this was possible. One shows a large memory component 670,000k, the other  about 6,000k. Huh? I shut down the smaller one and get a message that this is an illegal action, but it shuts down anyway.(That notice lasted only seconds and went away.)  I try again, I again see the second version in Processes, the same 6000k memory size. Now it shuts down with no notice. I know I saved the file and did tell PS to exit, so I shut down both instances of PS. Now it opens correctly.
    I'm of a mind that there is some corruption going on.The fact that programs won't close when I exit does bother me. ( I'd hate to think about reinstalling the whole shootin' match!)  What I will do is enable the History log. and see if I can capture any information.

  • My macbook 13 inch late 2007 model got soaked in wine I bought a pro to replace it , I want to use my hard drive on it as an external , I already purchased the case , now the motherboard I understand gets bad but not the hard drive , right?

    my macbook 13 inch late 2007 model got soaked in wine I bought a pro to replace it , I want to use my hard drive froom the old one on the macbook pro and use it as an external , I already purchased the case , now the motherboard I understand gets bad but not the hard drive , right? but everything else still is in there right. ? 
    I got my case from owc computing
    thye used a cloner last time I got the hard drive from them , but the apple had to be working. and now it's just not going to turn on wine is sticky forget about
    no worries I enjoyed it for 6 years could have gone longer I have all this extra gig ram memory, and a new digital drive for ith had broke
    all I want it my hard drive available at owc and make it a usb drive and acc3sss my stutt ? thansk any ideas and also on how I could sell or use the parts I can salvage,    and yay my new pro ix 17 inches silver sleek full ms office i life and i work. included 389 awesome price , no need for new this does awesome . rather than buying an optical drive for 200.00 I got a new computer to me and better for a lot less.          
    I am gratefful , just please help on the hard drive question as external ,
    thanks
    just didnt want to make this sound like a sob sitiuation and also inspire others what can be done.
    and I then will be able to upgrade to Snow Leopard and i life 2011.

    Well as I suspected I love OWC company I pulled out the mac hard drive , they offered me a Macdrive  free trial program to check your drive on PC Windows and yesSSSSSSSSSSSSSSSSSSSSSSSS it all there nothing lost
    woohooooo , thank you but nothing is dead, when you have faith , this was a prayer answered big time I wanted a pro so much and I get to use my 500  plust 250 plus 120 GB drives all of them
    ladies and gentlemen and I get to keep the 2 GB in from my macbook 13 inch and sell all the parts
    yipeee
    thanks for the support, now the case is Solved. !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

  • Deleted iPhoto and now I can't reinstall it -I'm using a second hand iMac so not using the Apple ID used to register it

    I had trouble updating iPhoto so I uninstalled it but now I can't reinstall it. I'm using a second hand iMac so I'm not using the Apple ID that was used to first register it. When I go to the App Store and try to download iPhoto it just says (accept) I click this but nothing happens ?
    Please help 

    Maybe you need to register the computer with Apple:
    Register Your Apple Product
    Your Support Profile for Registered Purchases

  • HT3255 Do the cases for the Macbook 13.3' air 2011 model fit the Macbook 13.3' air 2008 model?

    I recently purchased a MacBook Air 13.3' late 2008 model. I am looking for a case. Do the cases for the 2011 still fit the 2008 model?

    Generally speaking yes, but check the manufacturer's website to be sure.
    I like these:
    http://www.speckproducts.com/macbook-cases/macbook-air/pixelsleeve-for-macbook-a ir.html

  • Where can I buy an ipad2 case with the same design as the case for the original ipad?

    I thought the case for the original ipad was great, but it doesn't quite fit the ipad2.  Is there somewhere I can find a case with that same design, but fitted for the ipad2?

    www.amazon.com
    Search for "iPad 2 Case"

  • G'day, i am trying to type into an adobe document using the typewriter function. However everytime after i type the text vanishes. It is almost as if the text is white and vanishes into the background. However this is not the case as the works are not vis

    G'day,
    I need some help, i am trying to type into an adobe document using the typewriter function.
    However every time after i type the text vanishes. It is almost as if the text is white and vanishes into the background.
    This is not the case as the works are not visible regardless of the background color.
    The text box remains available and can be edited if clicked on, also if i double click on it the typed words become visible and editable, however once i close the box i cannot see them on the screen.
    I would appreciate any help i can get, i cant seem to do anything using properties or view.
    Thanks 
    Tiernan

    Hi Sara,
    See response to your questions below:
    1.     Are you running into this issue in a specific PDF, or in all of them?
    A.     All of them
    2.     What version of Acrobat are you using (and, are you on Mac OS or Windows?).
    A.     Using Acrobat 10.0\Acrobat on Windows
    3.     If you look at the text properties on the Tools panel (under Format), what color is the text swatch?
    A.     Test swatch for the text is black
    4.     What happens if you change the text color?
    A.     Nothing.
    I look forward to hearing back from you.

  • Hi all i have recently bought a second hand imac but didnt recieve the administrator passwords any suggestions?

    hi all i have recently bought a second hand imac but didnt recieve the administrator passwords any suggestions?

    If you can't get the discs, call Apple with the serial # and ask for them. They should send them to you for a reasonable charge.

  • After editing a RAW photo in PE13 (my External Editor) sent from Apple's iPhoto, I can not reimport the edited photo bank into my iPhoto library. The "Import to Library" command is greyed out. This was not the case before the latest PE13 RAW update versio

    After editing a RAW photo in PE13 (my External Editor) originally sent from Apple's iPhoto, I can not reimport the edited photo back into my iPhoto library. The
    "Import to Library" command is greyed out. This was not the case until the latest PE13 update (Camera Raw Version 8.7.1.311). What needs to be done
    to reimport edited photos back into my iPhoto library? Ideas?

    Launch PSE Expert Mode and go to:
    Photoshop Elements Editor >> Preferences >> Saving Files (tab)
    Set the drop-down dialog
    On First Save : Save Over Current File
    Click OK.
    When you have finished editing in PSE use Cmd+S to save (not Save As)

  • Why should u not leave the case on the ipod while it is charging?

    Why should u not leave the case on the ipod while it is charging?

    Because charging the iPod battery generates heat which may become excessive if the iPod is left in a case. If you don't allow the heat to escape, then you risk damage to the iPod.

  • Mac App Store -- why can't I 'gift' Mac Apps? Gifting specific apps in the iTunes store is easy. This is not the case on the Apple Mac App Store.

    Why can't I 'gift' Mac Apps? Gifting specific apps in the iTunes store is easy. This is not the case on the Apple Mac App Store.

    An alternative is to purchase an iTunes gift card that can be redeemed for apps in the Mac App Store.
    Buy Apple Gift Cards, iTunes Gift Cards & iPhone Gift Cards - Apple Store (U.S.)
    iTunes Store: How to redeem a code
    You can provide feedback to Apple >  Apple - iTunes - Feedback

  • Installation on a second hand imac

    Hi
    I bought a second hand IMac G4 a couple of days ago, I am having trouble installing the disc set up as it requires a password. Can anyone help me or do i have to go through the channels of contacting the seller. The seller seems to believe that there should not be a password. Help!!!!!!!
    Kelle

    kelle.simons
    See the post by R-C-R and the others. If the disc you have IS the grey install disk for your machine you should be able to install it without the direct use of a password. If it is some other disk for OSX not so.
    It is not clear if you are trying to install the correct way. That is to boot up the machine holding down the c key. That boots from the disk and a sort of desktop comes up, you make some menu choices and wait a while as the OS on the disk is installed. You then install third party apps and configure wireless or such.
    The above pre-supposes you can get the install disk for OSX into the machine and you don't say if you can even boot up to the desktop without the disk and so allow yourself to insert the thing. Can you? If you can that means the former owner's OS install and maybe some other things of theirs are in there and the wise move would be to clear the HD and start from fresh. That involves more than you directly ask for.
    There is a way to get a disk into the machine (other things being well) even if you cannot get to the normal desktop. That involves the use of a 'Single User' start up and a couple of command line entries. 'Single User' start up has it's risks especially for a novice, but I did use it recently to get a disk into a Mac and boot from it to install the OS as you want to do, when a builder had cut the house power and nothing else was working. In that instance we had no worries about the existing user data and configurations so chose to re-install keeping the same settings and only replaced the system proper
    Tell us more and we can help. Remember what Roam said about an Open Firmware Password. That would stop you getting to a Single User start up.
    Your last post asked about a 'newer disk'. The first answer is yes. Get Panther but first be sure you have a functioning machine with a functioning OS before you spend money on an UPGRADE.

  • I baught second hand iMac and having trouble to reset to factory setting Help pls

    I baught second hand iMac and having trouble to reset to factory setting Help pls

    The previous owner left a Recovery HD partition on the drive. You cannot use it because it will only install a version of OS X that is tied to that persons Apple ID. You cannot use his/her Apple ID nor reinstall his/her copy of OS X. You must start, literally, from scratch.
    You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mavericks if your computer meets the requirements.
         Snow Leopard General Requirements
           1. Mac computer with an Intel processor
           2. 1GB of memory
           3. 5GB of available disk space
           4. DVD drive for installation
           5. Some features require a compatible Internet service provider;
               fees may apply.
           6. Some features require Apple’s iCloud services; fees and
               terms apply.
    Clean Install of Snow Leopard
    Be sure to make a backup first because the following procedure will erase
    the drive and everything on it.
         1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
             with your computer.  Insert the disc into the optical drive and restart the computer.
             After the chime press and hold down the  "C" key.  Release the key when you see
             a small spinning gear appear below the dark gray Apple logo.
         2. After the installer loads select your language and click on the Continue
             button. When the menu bar appears select Disk Utility from the Utilities menu.
             After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
             size.)  Click on the Partition tab in the DU main window.  Set the number of
             partitions to one (1) from the Partitions drop down menu, click on Options button
             and select GUID, click on OK, then set the format type to MacOS Extended
             (Journaled, if supported), then click on the Apply button.
         3. When the formatting has completed quit DU and return to the installer.  Proceed
             with the OS X installation and follow the directions included with the installer.
         4. When the installation has completed your computer will Restart into the Setup
             Assistant. Be sure you configure your initial admin account with the exact same
             username and password that you used on your old drive. After you finish Setup
             Assistant will complete the installation after which you will be running a fresh
             install of OS X.  You can now begin the update process by opening Software
             Update and installing all recommended updates to bring your installation current.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.

  • Hi i did buy second hand imac. 10.6.8  there is not iphoto. what iphoto is right to dawnload for use?

    hi i did buy second hand imac. 10.6.8  there is not iphoto. what iphoto is right to download for use?

    You can get iPhoto/iLife '11 so the newest one.

  • If one buys pages , can i download it and run it on my desktop AND my laptop or do I have to buy it twice? its only me using one machine at any one time. (Have recently purchased a second hand iMac and secondhand Mac book pro 17")

    If one buys pages , can i download it and run it on my desktop AND my laptop or do I have to buy it twice? its only me using one machine at any one time. (Have recently purchased a second hand iMac and secondhand Mac book pro 17")

    I have a couple or dozen or so excel spread shheets that I use origionally created in M/s Excel v.5.0 ( yup some time ago although have run and updated them on office 2007  perfectly etc.  AND numerous word files that I refer to. I have also run these files using Open Office on a small 13" mac Book Pro. successfully.
       I have now decided to change my personal use computers > macs.
    Ok, so in summary then i think you kind guys are saying:
    (1) That if i buy Pages & Numbers or even iworks which is Apple's suite of such programs i believe, then I can download and Run these apps /programs on each my personal  mac computers whether they be my second hand Imac or second hand 17" mac book pro. ( basically i have purchased these so that I am converting to the "Apple Side" and can use the Imac desktop while at home and Mac book pro when out and about) , under the one purchase and one licence.
    (2) The decision as to whether to Buy M/s Office for Mac v Pages & Numbers or the iworks suite is that if I have lots of MACROs in my existing files written in M/soft that it would be better to go for M/s Office for Mac. I understand that Macros are the automated thingys ?? I have formulae obviously inthe fairly simple spread sheets but not aware of any macros. So I guess that means ~ I could purchase either product by the sounds of it. yes? Are there any other obvious things i need to consider?
    Other INFO:
    Also, I have snow leopard on one system and Maveric ( pretty impresive!) on the other. i am slightly reluctant to upgrade the snow leopard o/s as I would have to upgrade the paralles software and probably Windows software as well in order to run an old Kitchen, drawing program that I use occaisionally. I know that one should be able to partition / and Boot camp but I really don't want to do that. I feel at this stage its not worth payingtoi up grade all these bits of software for something I rarely use. But I am open to anyones comments / views.
    Thanks.

Maybe you are looking for

  • 'No' symbol on start-up, disk utility not recognizing internal drive

    Need a little assistance. Two days ago I was using the Macbook and it froze. Restarted and I was hit with the international no symbol. I've also gotten the blinking file folder at times when I've tried the holding down of various buttons on start-up.

  • Purchased Acrobat X Pro Mac in Italian - Want English as main language

    Haven't gone through the process yet but can I select English as the language? I'm worried because I just went through this process with Microsoft Offce and it didn't work. Had to uninstall Italian versin of Office, download trial version in english,

  • Problem with the ALV after sending the mail

    Good Morning Experts I have a small issue with the ALV. I have a program, which has to sent email. In My program initially I am displaying basic list in the alv and user can navigate to secondary list also, by clicking on a contract number in the bas

  • ECC 6.0 - EHP4 - Client Import

    Dear Experts, This is a reimplementation project. Previous company has installed & configured ECC 6.0 - DEV/QAS systems (ABAP stack only). Now, we want a fresh installation of DEV/QAS servers with ECC 6.0 - EHP4. The management wants to restore all t

  • How to create users for B2B console in SOA Suite 11g?

    Hi, I have installed SOA Suite 11g and created a new user in weblogic server and assigned groups Deployers, Monitors & Operators. On trying to login(http://hostname:port/b2bconsole) using this new user, im not able to login and the below error is log