The center speaker plays the subwoofer, and vice-versa
I bought today a A500 set but the the center speaker plays the subwoofer, and vice-versa. I have a realtek HD audio sound card, what can I be doing wrong?
I have the some problem with t600. Subwoofer plays front rignt and front right plays subwoofer. Can anyone can help me?
Similar Messages
-
My ipad does not communicate with my iphone on one of my email accounts and will not remove deleted emails that are done on the iphone and vice versa, what setting needs to be changed?
It's my understanding that an iPhone can only sync with one computer. You need to choose one computer. Sounds like it syncs at work, but not at home. If you want to just sync it at home, then you have to make sure the home computer has all the info that you want on it, like music etc. Then you have to deauthorize the work computer for it to sync at home. When you connect it will ask if you want to set up as a new iPhone or restore from backup. If you don't have a backup on the home computer then either way you will be wiped clean. So any photos, contacts, notes etc you have will be erased. You would need to backup or copy your photos from your iPhone. When you connect it to your home computer, it will give you that popup message to open your iPhone files. Then you can copy those photos and save them onto your computer and sync them back in through iTunes.
For your contacts, do you use any type of address book? If so you'll want to back that up and then transfer to your home computer. For notes, you can just email those to yourself and then save that email. I use MobileMe so the contacts issue is easily resolved. -
I'm having difficulty syncing my iCal between my home computer and iPhone. New entries from my home are not syncing with the phone and vice-versa. I didn't have any problems with this before until the latest phone update. Any suggestions?
It could be that the existing wire in your appartment is not clean enough to provision DSL only. When combined with the phone possibly it has a higher line voltage and worked before. Now that the line is to be provisioned without phone service it may be giving them trouble that did not show before they came out and ran the new line test. So a new jack dedecated for your DSL line may require a new wire be run to your appartment. Also the account for internet only used to require direct billing to a credit card or something else. This was a number of years ago. Most accounts are linked to a phone number, and without a voice number it adds to the confusion.
If you are getting the voice and everything turned on as before, then I am at a loss for words. -
Keyboard - when I press the z key the y character appears on the screen and vica versa.
I upgraded the software on by Q10 yesterday and now have a problem with the z and y characters. Any ideas how to fix this?
Solved!
Go to Solution.Isn't it a keyboard layout setting?
Like a shift between AZERTY and QWERTY for example. Check in the language input section of the preferences and see if you can find a solution there.
Kepp us posted
Please don't forget to mark as "solved" if your question is replied and to "like" a useful reply to your post ;-) -
My iMac does not see the windows machines on the network (and vice versa)
I'm runningOS X 10.8.2 on my iMac which attachs to the office network using Wi-Fi.
It's on the right network (it's not attaching to the Wi-Fi router in the bulding next door) - I've checked the SSID and it's also being issued the right IP address by the router.
I can ping the Windows machines and they can ping my iMac. The issue is that I simply CANNOT share files back and forth.
At seemingly randoms times, I can, and I have File Sharing enabled in Sharing (remember, and RANDOM times I CAN see the Windows machines and they can see the iMac...BUT, it's random).
Thoughts?zahidfh, Welcome to the discussion area!
More than likely your area has very significant RF interference in channels 1-6. The interference is making those channels unusable by you.
KB 58543, AirPort: Potential sources of interference
Also, is this a forum where Apple technicians reply to queries??
Take a moment to read the "Help & Terms of Use" for this area and you will discover that this area is a user-to-user discussion area. There is no guarantee that anyone from Apple will ever read any of these threads.
I was unable to find any area where I could post a direct help request regarding this!
That is because one does not exist. If you want to communicate with Apple about a problem or issue you must call them. -
Any help?
You may already have one. E-mail servers provide support for POP or IMAP, and sometimes both. How you access the account depends on how you set it up on your device. You'll need to check with your e-mail provider and see if they support accessing your account via IMAP. If they do, you'll need to re-create the account on both the Mac and the iPhone to use the IMAP settings instead of the POP settings. (Note that when you delete a POP account, all e-mail in the In box will be deleted. Move any e-mail you don't want to lose into an "On My Mac" mailbox on the Mac beforehand.)
Also, if you have set the iPhone to sync e-mail messages in iTunes, turn that off. You won't need that with IMAP. -
My "volume up" button also turns off the ipod and vice versa? help!
I got my ipod touch 2g about a week or 2 ago, everything worked fine until today. After coming back from lunch, i sat down in my office and turned on my touch and quickly noticed the volume went up by itself for no reason. i turned it off and on a couple of times but the problem persists. So i reset the ipod, turned it off and on a couple more times, reset the setting and even software restored it. It didn't work. Now both my power and volume up button does the same thing -- turns the ipod off and volume up at the same time. so when i press the power or volume up button, the volume goes up, and the ipod turns off as soon as i let go of it.
I just upgraded to 3.0 couple days ago, i dont' know if thats the problem but as of the ipod its in a 99% mint condition and the buttons dont feel to be broken at all. I even downgraded to 2.2.1 to see if that would solve the problem, and it didnt.
thanks alot for the help.I am also almost having this same exact problem. The only difference for me though is that if I completely power off the touch it won't power on again until I plug it in. The battery isn't dead, it just won't power on until the sync cord is plugged in to the computer or I put the touch on my Ihome's dock. Other than that my up volume acts just like the power button. It all started shortly after I installed 3.0. I have restored, let the battery die, and reset but it still does the same thing. I've only had it a few months, but it's still under warranty so I guess I'm gonna hafta see what the "geniuses" think.
-
Cannot play swf made on a Mac on the PC and vice versa
Hi,
I have some avi files that I need to turn into swf. When I convert them to flv files using adobe media converter on the PC then put them into flash and export as swf files, they look good on the pc but will not show on the mac (just white box). Conversley when I make swf files on the Mac (using the FLV files from the PC) they look OK on the mac but do not work on the PC? Any ideas how to fix this?
ThanksMight be a strange internal referencing problem (delimiters differ on Mac and PC) Embedding flvs in the swf causes many problems with audiosynch etc. If your videofiles are longer than 1 minute you should go for the streaming option
File>Import>Video>Load external Video via Playback-component -
This has been happening on and off for the past couple of months.
When I type a scentence that either begins or ends with any kind of punctuation, the punctuation jumps to the opposite side of the text.
ie. What's New? becomes ?What's New
Sometimes closing photoshop works to fix it, sometimes restarting my computer works, and sometimes it just stops on its own.
I end up having to creeate the punctuation in a seperate text layer and my layers end up a little messy.
I'm using Photoshop CS6. Any advice would be greatly appreciated!I seem to have solved the problem, fingers crossed, but thank you for helping!
I'll post what I did here in case anyone happens upon this thread with the same problem.
Go to Edit > Preferences > Type - make sure 'Middle Eastern' is selected
If it's not selected, select it and restart photoshop. If it is selected, close preferences and move to the next step.
Go to Type > Lauguage Options - Select Middle Eastern Features
Go to your Paragraph Panel, and make sure this is selected:
That seems to be working for me. -
could someone help
Without buying a new phone you can test this. Unplug the phone that has the combination button. If its a cordless phone base station with multiple handsets, make sure you unplug those as well. Then use a regular phone plugged in to do test calls (if you dont have one you could maybe borrow one for a couple minutes from a friend, family, or neighbor).
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan -
null
Post relates to: Treo 680 (AT&T)Hello and thank you for using the Palm Help Forums!
It's more like naming the partnership. By "naming" your device is doesn't do anything harmful. If you name it Pat's Treo, when syncing it tot he computer, hotsync will say "Syncing with Pat's Treo." You can name your device Fido for all it matters.
Post relates to: Treo 800w (Sprint) -
HT4557 When I set my airplay onscreen code it disables the password and vice versa
When trying to sync my Apple TV with my Mac...in trying to set the onscreen code the pass is nulled and when setting password the onscreen code is nulled.
Hi,
Normally if a Mac boots to a desktop screen with an option to enter a 4 or 6 digit code, then the machine has been locked by Find My Mac (an iCloud service).
The only way to have this unlocked is either type in the 4 or 6 digit code that was set up on the iCloud webpage when locking the mac or take the machine to an Apple Store or authorized service provider to have them unlock the machine but they will need to verify that your account locked the machine etc.
-Dib. -
How can i sync email deletions on my iPhone and iMac, and vice versa?
My email provider is Sky in the UK. While i am able to receive the same emails on both devices (imac and iphone) simultaneously, if I delete one on the iphone, it is not deleted on the iMac, and vice versa. I don't want to have to delete emails twice, once on each machine, but rather only once on one machine (and then that email would automatically disappear from the inbox of the other machine).
Is this possible? My sky account is IMAP on the Iphone, but POP on the IMAC. I tried changing it to IMAP on the iMac, but then i couldn't received email messages in MAIL on the iMac so reverted it back to a POP account.
Any advice appreciated. Spent way too many hours today trying to figure this out.
Thanks,
Joeif it were imap on both, you'd be able to delete an email from one device and it would remove it from the other. they can't have different protocols and still sync with each other
-
A520 Speaker is only playing sound on the subwoofer and 2 other speakers
My A520 Speaker is only playing sound on the subwoofer and 2 other speakers i tried every thing I could, but cant seem to find the problem (win 8.1)
I checked on Creative's support site and search for A520 and this is what I found http://support.creative.com/kb/ShowA...aspx?sid=64705
I think because your source is stereo that's why you are only hearing sound from 2 speakers and the subwoofer. You will need to enable virtual surround in your sound card to be able to get all the speakers playing I think.
You can do a speaker test by going to sound, playback devices and click on configure to test the channels in Windows. -
iTunes has this song by Luiz Gonzaga Jr (Palavras) that plays as the song that follows (A Felicidade Bate A Sua Porta) and vice versa, and i thought Palavras would sound like the other: so isn't this a mis-labled song situation?
Maybe you are looking for
-
Adobe Air 3.7 Runtime issue
Application Overview: The application is a digital book in which the user has a set of tools like pen, eraser, highlight and so on... The user can create annotations using the tools on top of the digital book and can save the annotations created to u
-
I have researched this, read the iMovie help, and still cannot figure this out. I want to split an event. When I follow the instructions all it does is duplicate the entire event. I am selecting the portion I want split...I go to File>Split event bef
-
Adjust page margins when printing from websites
I'm trying to print a page from the internet that contains a picture and text. When I click on "printer friendly" the page comes out with text on the right side cut off.
-
CL_ABAP_TYPEDESCR
If I create a user defined type with reference to a DDIC object I can obtain the list of fields in the user defined type and the obsolute name which contains the user defined type by calling method describe_by_data of class cl_abap_structdescr at run
-
I purchased Lightroom 5, loaded it on my Mac, and updated to version 5.6. I then tried importing photos from my Sony DSC-RX100iii. Unfortunately it only imports JPEG files but no RAW files. What is the problem and how do I fix it?