The central system has no logical system name

I am encountering one error message during configuring the Chnage Request Management in solution manager. As follows.
The central system has no logical system name
Message no. SCDT_DIST034
How do i define it?

Hello,
You may define logical system name via Tcode SCC4. Select your client and there is dropbox for Logical System. Click on the dropbox and you may received message "No value.." and ask you if you want to define the new logical system.
Please ensure the rec. logical scheme is : <SID>CLNT<CLNTNO.>
Hope this could help you.
Regards,
AZLY

Similar Messages

Could not access the central system - CUA problem

Hi all,
Please help me with this problem.
Its just a test scenario, when everything will be good here, i have to do the same for Production.
We just did upgrade our R3 system from 4.6 to ECC6.0.
I created CUA on DB1100 ( Dev BW 4.6 ) with two child systems 1) DC1150 ( Dev CRM 4.6)
2) DE1400 ( DEV ECC 6.0 ).
Now everything is working fine between DB1100 and DC1150..
It works like CUA ( DB1100) and child (DC1150) systems as it should be.
But connection between DB1100 and DE1400 is not working fine. When you go to SU01 in DE1400, it does not allow me to change anything. It means connection is there and DB1100 is taking DE1400 as child system but when i am updating any user information or roles in DB1100 it is not updating child system DE1400.
And when i went to tcode SCUA in DE1400 it gave me this error.
"Could not access the central system DB1100".
I dont know whats happening. I did same config in DE1400 as i did in DC1150. DC1150 is working fine but not DE1400.
The most weird thing is that DB1100 is thinking DE1400 as child system and i can not make any changes to DE1400 directly.
please help me with this. What i can do to make this working between DB1100 and DE1400??
i need to do the same in production if it gets passed.
Thanks in Advance.

Hi mala_swa,
seems that you have a problem with the rfc-connections....
Please check in both directions. The connection have to work without problems.
Check SCUL in DB1100 - what is the status of the distributed users? Errors, unconfirmed?
Check idocs in DE1400. Are there some? What is their status?
The most common error is coming from not working rfc-connections. That brings for instance problems while generationg partner profiles, etc. Also the strict naming convention (log. system name=system name in CUA landscape = name of used RFC-connections) has to be considered....
So that are some points, that you could check.
good luck,
Bernhard

How do I get the Weblogic system name in WLS 6.1 sp2 without creating T3Client

Hi Folks,
In Weblogic Server 5.1, I get the weblogic.system.name using the following code:
T3ServicesDef t3services = T3Services.getT3Services();
String systemName t3services.config().getProperty("weblogic.system.name");
What is the counterpart for Weblogic Server 6.1?
Thanks in advance for your help.
Bill

The class doesn't seem to be documented in the normal documentation, but
you can get an overview of the methods by executing
javap weblogic.management.Admin
with weblogic.jar in your classpath.
Hope that helps,
Nils
Bill Lam wrote:
>
Jim,
Can you tell me where I can find documentation for
weblogic.management.Admin?
Thank you.
Bill
"Bill Lam" <[email protected]> wrote:
Jim,
Thanks. I appreciate your help.
Bill
Jim Brown <[email protected]> wrote:
Bill:
The weblogic.server.name property in WLS 5.1 has been replaced by the
property weblogic.Name in WLS 6.X. Although it is possible to retrieve
this value by calling System.getProperty(), I would encourage you to
use
the new JMX services which have replaced our proprietary management
interfaces (T3ServicesDef, et. al.). For example, you could write aJMX
client to read the various properties of ServerMBean. To get started,
here is the link to our WebLogic JMX documentation:
Programming WebLogic JMX Services
<http://e-docs.bea.com/wls/docs61/jmx/index.html>
Please post any follow-up questions about JMX to the
weblogic.developer.interest.management.general_and_jmx newsgroup.
Besides writing a JMX client, you can also take advantage of the
following short-cut for retrieving the server name. The remaining code
for this example can be found in your WebLogic Server samples directory
under: ./wlserver6.1/samples/examples/cluster/rmi/HelloClusterImpl.java
private String getLocation(){
String toReturn = null;
try{
toReturn = weblogic.management.Admin.getServerName();
}catch(Exception e){
System.out.println("HelloClusterImpl failed getLocation");
e.printStackTrace();
if(toReturn==null){
return "";
}else{
return toReturn;
Regards,
Jim Brown
Bill Lam wrote:
Hi Folks,
In Weblogic Server 5.1, I get the weblogic.system.name using the followingcode:
T3ServicesDef t3services = T3Services.getT3Services();
String systemName t3services.config().getProperty("weblogic.system.name");
What is the counterpart for Weblogic Server 6.1?
Thanks in advance for your help.
Bill--
Jim Brown
Developer Relations Engineer
BEA Support
============================
[email protected]

Can the central system and the sender system at different time zone?

We have a control(i.e. central) system which is 6 hours ahead of the sender system.
When processing step "analyse tables in sender system", we get short dumps immediately at control , sender and receiver.
On the sender, the short dump reads:
Runtime Errors         CALL_FUNCTION_SEND_ERROR
Date and Time          01/15/2011 16:09:05
Short text
     " " (I/Oerror)
What happened?
     "CPIC-CALL: 'ThCMSEND' : cmRc=18 thRc=0#Statistics not active "
An error occurred when executing a Remote Function Call.
On the central system the short dump reads:
Runtime Errors         CALL_FUNCTION_REMOTE_ERROR
Date and Time          15.01.2011 22:09:00
Short text
     "Field symbol has not yet been assigned."
On the receiver the short dump reads:
Runtime Errors         GETWA_NOT_ASSIGNED
Date and Time          01/15/2011 22:09:00
Short text
     Field symbol has not yet been assigned.
What happened?
     Error in the ABAP Application Program
The current ABAP program "SAPLCNVTDMS_BW_FUNCTIONS_REM" had to be terminated .
We never get this error before on this step. The only thing I can think of is that the sender and the central system
are at different time zone.
Please share your experience.
Thanks!

Hi,
By looking at the runtime error , the reason of the dump should not be the timestamp diff .
You can create an OSS ticket with SAP for further analysis.
Also, there can be data consistency issues due to time diff .
Cheers
Sandeep

How to find the local system name in remote desktop through oracle

Hi all,
i am useing oralce 9i,D2K (Forms 6i) ,Presently i had a small problem when ever i am useing the application through the remote desktop i can not able to find the local system name .If i am accessing from the local system name then i can get the system name but when the user accessing the application through remote desktop i want to find from which local system he is accessing the remote desktop through the application is there any way to find it .If please let me know .
Thanks in advance
Srini

Hi,
Not sure of what you want.
Have a look at v$session view. Machine column is maybe what you're looking for.
If you want to retrieve the local host executing remote desktop, it's actually not possible natievely, since it's still remote host that is connecting to the database.
Hope it helps.

How to identify the EBS system name?

All,
version : 11.5.10.2
I have a requirement to uniquely identify the ERP system name, hence I found FND_APP_SERVERS table. Is this the right table to use? If so, i have written my query as 'select name from fnd_App_servers where server_type='APPS' '. This query return me multiple rows(ex: node1, node2) as I have a multinode installation. I'm looking for a table which is irrespective of multi-node or anything, it should always give me the name of the EBS system. Please help me
thanks
sen

I have a requirement to uniquely identify the ERP system name, hence I found FND_APP_SERVERS table. Is this the right table to use? If so, i have written my query as 'select name from fnd_App_servers where server_type='APPS' '. This query return me multiple rows(ex: node1, node2) as I have a multinode installation. I'm looking for a table which is irrespective of multi-node or anything, it should always give me the name of the EBS system. Please help meIf you are looking for the Apps URL, please run this query:
SQL> SELECT HOME_URL
FROM ICX_PARAMETERS;http://etrm.oracle.com/pls/trm11510/etrm_pnav.show_object?c_name=ICX_PARAMETERS&c_owner=ICX&c_type=TABLE
Thanks,
Hussein

User locked as ( Globally) locked by system manager in the central system"

Helo
I have an issue with unlocking a user id in Production, when i am trying to unlock a user in production system i am geting the message
"(Globally) locked by system manager in the central system"
could you please tel me how to unlock the user in regular way.
there is no CUA setup in our landscapes ,not sure what is wrong , please assist immediately
regards
jayu

> there is no CUA setup in our landscapes ,not sure what is wrong
No CUA setup but still error shows locked by system manager in the central system.Anyhow try to unlock the user by another method.use tcode ewz5 to unlock the user...let me know whether its working or not
> could you please tel me how to unlock the user in regular way.
http://www.sap-img.com/basis/different-methods-to-lock-or-unlock-sap-users.htm
Regards,
Rafikul

CUA can be used between 2 clients which are in the central system

Hi
Question 1:
In case of CUA, we have the conecept of central system and child systems. From Central system we will be able to administer child system. Buy my question is can we implement CUA with the clients which are also on the central system ?
Question 2:
Normally LDAP is connected to central system and central system inturn will be connected to child systems. But Can we connect Central system and LDAP to the child system at a time ? Is there any situaitons where we will come up with this situations ?
Thanks
Kumar

Hi,
> In case of CUA, we have the conecept of central system and child systems. From Central system we will be able to >administer child system. Buy my question is can we implement CUA with the clients which are also on the central system ?
>
Yes, you can control other clients of the central system through CUA.
> Question 2:
> Normally LDAP is connected to central system and central system inturn will be connected to child systems. But Can we >connect Central system and LDAP to the child system at a time ? Is there any situaitons where we will come up with this >situations ?
If you want to use CUA then your LDAP must be connected to your central system.
Thanks
Sunny

Fetching the business system name during graphical mapping

Hi,
After the receiver determination is done and in interface determination, while executing the interface mapping, i need the business system name for which the
mapping is under progress. This i need during mapping.
Also, i need the configuration scenario name during mapping.
Is there any XI internal variable/system variables which hold these values so that using user defined function they can be accessed and used in graphical mapping ?
In appreciate your input in this regard.
Regards
Ganesh

Hi,
For the configuration name you can map it with a constant and for the sender,receiver services and interfaces you nee to use the UDF as one mentioned below.
Imports com.racs.gpt.*;
public String getMapValue(String a,String b,Container container)
//String a denotes incoming data string |data1|data2|data3|...|dataN.
//String b = lookupID.
//container contains runtime parameters.
AbstractTrace trace;
String headerField;
java.util.Map map;
String result;
trace = container.getTrace();
// get constant map
map = container.getTransformationParameters();
CrossReferenceAPI maprule1 = new CrossReferenceAPI();
result = maprule1.getData(a,b,map);
trace.addWarning("result = " + result);
if (result.equals("$NULL$"))
trace.addWarning("XREF Error. Mapped data for " + a + " not found");
ErrorHandler errHandler = new ErrorHandler();
int lookupID = Integer.parseInt(b);
errHandler.logSQLError(map, lookupID, a, "");
result = "?";
return result;
Regards
Madhu

How to change the SystemID (system name) of the HP StoreOnce Virtual Storage Appliance (VSA)

I can't seem to find a darned way to post a question regarding the HP StoreOnce Virtual Storage Appliance. I want to change the name (SystemID) of a StoreOnce VSA that has already been deployed. The web interface has NO way of changing any value.
The command line interface (through ssh) doesn't seem to have any way to change the SystemID value in any way. I want to change this value so that when I have it join the Active Directory domain it is a meaningful name, and NOT the serial number of the VSA.
I KNOW that I am asking in the wrong place, but I don't know what the proper place is to ask this question.
Unless you have either of the below keep your comments to yourself:
1) a real suggestion on where to post this
2) an answer to my question

Bill, welcome to the forum.
I believe you will receive the help that you need if you start a thread here.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Apogee Ensemble: What are the issues it has with Logic 8?

I've read raving reviews about the Ensemble--one of which describes it as being a huge improvement over a MOTU 828mkII, which I happen to have. At the same time, I've seen some posts in this forum about the issues the Ensemble has with Logic 8. I couldn't find, or understand, what those issues are.
Can someone explain to me what problems I might encounter if I get an Apogee Ensemble? I'd much appreciate it.

Mackie control with Logic 8 is all over the place, i was surprise to see this the Stop Play Rewind and so forth is at fault, the faders works so i have to use the Controls on screen, i take it Apple will soon update the Control-units to work properly with Logic 8, even though L.8 is pretty new, but i find Logic 8 to be very impressive,
Fr. BlayZay.

What is the logical system name used for in R/3?

We have a R/3 server. The production client has a logical system name. What is the logical system name used for?
Tony Tam

Hi Tony
Following Links will help you in understanding the concept
http://benstudycenter.blogspot.com/2008/02/logical-system.html
http://help.sap.com/saphelp_sm32/helpdata/en/78/217dc151ce11d189570000e829fbbd/frameset.htm
http://help.sap.com/saphelp_sm32/helpdata/en/78/217dc151ce11d189570000e829fbbd/frameset.htm
thanks
Bhudev

How to change or rename the logical system name T90CLNT090 IN BI 7

HI Expert's,
i am really digging for the solution of changing or renaming the logical system name technical name T90CLNT090.
in our company we are using ecc5.0 with bi 3.5 and ecc6 with bi 7. In BW 3.5 having a connection with R/3 and the technical name of the myself bw source system(logical system) is T90CLNT090.
In bi 7 also the logical system name is same as T90CLNT090. Because of the same system name(Logical name) it is not active in BI7 and also it's giving error when i am activating the DSO Object as Transfer structure prefix for source system T90CLNT090 is not defined.
because of this i am not able to create the source system between r/3 also.
so how to change this source system name for T90CLNT090.
regards
harikrishna N

Hi,
Pls follow this OSS note : 325525.
Note 325525 - Copying and renaming systems in a BW environment
Summary
Symptom WARNING: THIS NOTE HAS BEEN REPLACED. FOR MORE CURRENT AND MORE COMPREHENSIVE INFORMATION SEE NEW NOTE 886102.
You want to copy and or rename one or more systems (database or client copy). One or more of the systems is a BW system or is connected to a BW system.
Caution: This note only deals with problems that occur in the BW source system connections. Other problems that occur in the BW environment (indexes) are NOT dealt with. See URL http://www.service.sap.com/bw --> Services & Implementation --> System copy & Migration.
Other terms BW, source system, OLTP, database copy, client copy, system infrastructure, transport system, connections, RFC connection, trfc, transfer structure, IDoc, ALE customizing, logical system name, system changeability, renaming systems, system copy
Solution Several scenarios are possible in this environment. Find the scenario relevant to your situation below and execute the steps listed or read the note(s) specified:
Scenario 1) You do not want to copy a system but only want to rename one (changing a logical system name).
           Solution scenario 1): Execute Transaction BDLS both in the client to be renamed and in the connected BWs or BW source systems. To do this, see Notes 121163 and 369758.
           Check the RFC destinations in all connected BWs/BW source systems as described in Note 524554.
           Reactivate all partner agreements that carry the new logical system name after renaming.
Scenario 2) You want to copy the entire system infrastructure connected by the BW source system connections (that means the entire system group) by a database copy. SAP recommends this procedure for copying systems.
           Solution scenario 2):
If you want to rename one or more of the copied systems, then execute Transaction BDLS both in the client you wish to rename and in all the connected BW and BW source systems. See Note 121163.
                    Make sure that an RFC destination exists with the new logical name in every connected BW or BW source system.
                    Reactivate all partner agreements that carry the new logical system name after renaming.
Change the hosts in the appropriate RFC destinations so that they refer to the correct computer. For this, see Note 524554.
Scenario 3) You want to copy a single BW system of the group by database copy.
Scenario 3)a) You only want to exchange the hardware of your system but do not want to rename the system.
                     Solution scenario 3)a): You do not need to execute follow-up work regarding the system connections, except for adjusting the IP address in the RFC destinations of the connected system.
Scenario 3)b) You want to keep the original system of the copy so that you have two systems after copying.
                     Solution scenario 3)b): See Note 184754.
Scenario 4) You want to copy a single source system of the group by database copy.
Scenario 4)a) You only want to exchange the hardware of your system but do not want to rename the system.
                     Solution scenario 4)a): You do not need to execute follow-up work regarding the system connections, except for adjusting the IP address in the RFC destinations of the connected system.
Scenario 4)b) You want to keep the original system of the copy so that you have two systems after copying.
           Solution scenario 4)b): See Note 184322.
Scenario 5) You want to import a client copy in a source system.
           Solution scenario 5): See Note 325470.
Thanks & Regards,
Suchitra.V

Logical system name in SLD for the R3 buss. system is not open for input.??

Dear all,
We are upgrading to PI 7.1 and have a problem in a scenarie where PI is sending IDOC to R3.
The problem is probably related to the fact that it is not possible to write a logical system name in SLD for the R3 system. I can not read the logical system name for the R3 system into the Directory (adapter specific identifier), *because the logical system for the R3 bussines system is not an input file??*. How can i enter the logcal system name so i avoid following error:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_INV_RCV_SERV</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Receiver service cannot be converted into an ALE logical system</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Regards Ugur

There are two ways....
Option 1 : Go to the BS of ur R3 system in Integration Direction. Go to edit mode mode and select Properties -> Adapter Specific attributes - > enter the LS name and save...
Option2 : You can use it from the mapping.... U either hard code/use from source the EDIDC40 section of ur mapping and the in ur IDOC receiver config select the option user
Option ! is the best soln...All the IDOC to that R3 system will go the specified LS...
regards,
Arvind R

IDOC sender: Error in Logical system name?

Hi,
In my current project, the IDOC sender system logical name is P2PCLNT100 but the SLD system name is P2P.
Its an IDOC to proxy scenario. At the receiver system side, the schemeAgencyID is getting populated at P2P and not P2PCLNT100, due to which there is an error on the receiver's side.
Following is already checked:
1. SLD has maintained the proper logical system name for the P2P system
2. The IDOC xml on the XI system has the sender port properly populated as P2PCLNT100
3. I have also debugged the program on the receiver side and fails at a point where it checks the logical system name from the database BBP_BACKEND_DEST.
On the receiver system, the followed error is shown as follows:
- <STANDARD>
<CONTROLLER />
<FAULT_TEXT>An error occured within an XI interface: SLD system P2P is not known Programm: SAPLBBP_BD_MAPPING_SAPXML1; Include: LBBP_BD_MAPPING_SAPXML1F1Y; Line: 96</FAULT_TEXT>
<FAULT_URL />
<FAULT_DETAIL />
</STANDARD>
Thanks in advance for the useful answers.
Sowkhya

Hi,
1. R/3 system's logical system name and SLD business system's logical system name has the same.
Is there a need to have the business system name in SLD to have the same name as R/3 system logical name?? As far as my knowledge goes, business system and logical system need not have the same name. Correct me if in the case IDOC sender scenario is different..
2. SLDCHECK shows following message:
Summary: Connection to SLD does not work
The issue still persists. Will SLDCHECK correct solve the issue?
Regards,
Sowkhya

The central system has no logical system name

Similar Messages

Maybe you are looking for