The change in model is not reflected to view

Hi,
I am using JDeveloper 10.1.3.3 with ADF Faces and ADFBC. I have Order and Orderline tables, related EO's and related VO and Viewlinks. When I test the model with AppModule Tester everthing works as expected. On the view part there is an ADF Form for Order VO and ADF Table for Orderline VO. In orderline there is a quantity field(af:inputText with autosubmit = true;) when it's changed the linetotal field is updated and ordertotal field is updated too. This logic is implemented in entity objects implementation. On the jsf page the change to linetotal field is reflected to view but the change to ordertotal field is not. linetotal and ordertotal fields both has Partial Triggers on quantity field.
On remove of orderline record I also update the ordertotal field and in this case the change is reflected to view. This should be a very simple issue. Any help is appreciated.
Best Regards,
Salim

Maybe you should run the code in an eventhandler for the event 'changed' of purchase order ?

Similar Messages

Changes to subtasks are not reflected in the summary task

I use Project Professional 2013.
Changes to subtasks are not reflected in the summary tasks. This includes both work and actual work as well as % complete. The tasks are all auto scheduled. Is there a setting that I need to change?

The only way I know to make that happen is if calculate project after every edit is disabled (See Options, Schedule tab).
Does this happen in all project files, for other PCs near you and do you have SP1 installed for Project 2013?
Rod Gill
Author of the one and only Project VBA Book
www.project-systems.co.nz

Changes to Query not reflected in views

We want to use various views off of a 'master' query to publish in our portal. I was working on the assumption that an advantage of the views was that if a change needed to be made it could be made in the query and then all the views off of that query would reflect the change. However I have discovered that some changes made in the query do not get reflected in the views. For example if I change the scaling on a key figure, this change does not get reflected in the views. In one case, as a test, I modified a formula in the query and also changed the scaling. The view reflected the modified calculation but did not reflect the new scale.
Does anyone know how to force these type of changes or is there documentation that at least list those changes made to the query that will not get reflected in the views?
Any help would be appreciated.
Stan Pickford

Hi Stan,
in general: Everything which belongs to the query view object won't be overwritten by query changes.
What belongs to the query view object? Basically everything you can change during execution of a query (Dynamic filters, Drill-Down-State, Properties of characteristics, structure elements (keyfigures) and Query-View).
What does not belong the query-view object: Definition of structure elements, Navigation space (characteristics available during runtime), Static filters.
Heike

"The attached ipod model is not supported by this applicatio

HELP! I installed my ipod nano and it all worked fine, got a few songs on it. So i downloaded some more, ripped a CD i had and did nothing particularly life changing. Going back into i-tunes it all went a bit funny and came up with a message saying "Cannot read ipod please reset to factory settings" So i went into ipod updater (the version that was on the CD that came WITH the ipod) and was told "The attached ipod model is not supported by this application" so i went onto the apple website and downloaded the latest version of the ipod program, tried again and the same message appeared: "The attached ipod model is not supported by this application" any ideas?!?!?!

Well let's assume you already have Ituenes 5.01 than if you can see the Nano as a mounted drive in My Computer I would recommend reformatting the Nano with FAT32 from there. Than try running Ipod updater again. Sorry I can't think of anything else right now, try searching around or see if someone comes to you on of your many forms. That's another reason not to double post those that are trying to help you don't know what else has already been suggested.

The UML Package model could not be resolved - SOLVED

I am using Perforce with JDeveloper 10.1.3.2.0. I have imported a project into Perforce on one machine, then 'p4 sync -f' on another machine. I then created a new application on this machine and added the projects to it. Now, when I try to open a diagram in package 'model', it gives this message:
The UML Package model could not be resolved
The element may have been moved or deleted from the file system, or the Model path, source path or classpath may be incomplete. This error can also occur when the element was found, but errors in its definition prevented it from being loaded. Examine the error stack for further information on the exact cause.
It also looks as if certain other files in the other projects are missing - it looks like a problem with the Perforce extension to me, or is it because I do it wrong?
Message was edited by:
jandersen

It gets stranger and stranger, I think.
As I told, I imported the project into Perforce, to a directory called /dtl/admintools, and found that I could still open all files - I did find that one file was missing (/dtl/adminstools/sysadm/SysAdm.jws), so I added it to Perforce. I then removed everything under /dtl/admintools and sync-ed it out from Perforce on the same machine - it still worked fine.
I then went to my home computer and did the same thing (over a VPN) and checked that I had received all the files, which I had. I then tried to open /dtl/admintools/sysadm/Model/model/model/SysAdmDiagram.oxd_bc4j, which contains entity- and view objects - this give the error message. I can see all the objects listed in the structure list, but if I try to open any of them, I get the same message. There are no error messages other than the one that pops up.
Both my workplace computer and my home one are AMD 64 machines running Gentoo Linux and it's the same version of JDeveloper too.

Do the Mac minis support using AirPlay and all of its functions? I thought I saw a comment yesterday that suggested the Mac mini (particularly the late 2012 models) does not support AirPlay. Thank you.

Do the Mac minis support using AirPlay and all of its functions? I thought I saw a comment yesterday that suggested the Mac mini (particularly the late 2012 models) does not support AirPlay. Thank you.

Hello,
AirPlay Mirroring
Requires a second-generation Apple TV or later. Supports the following Mac models:
iMac (Mid 2011 or newer)
Mac mini (Mid 2011 or newer)
MacBook Air (Mid 2011 or newer)
MacBook Pro (Early 2011 or newer)
http://support.apple.com/kb/HT5444

The attached iPod model is not supported by this application

I just bought a 20G color iPod. I spoke w/ the Apple tech support & I needed service pack 2. I downloaded it. I didn't have a USB 2.0 port then I installed one. I downloaded the latest Apple updater software 2005-06-26 then I tried the even later version 2005-09-06. When I go into updater, it says it is "initializing" and then says "the attached iPod model is not supported by this application." Reformat and restore are both grayed out. iPod doesn't show up in iTunes and doesn't transfer my library. I just got back from the Apple Store and the suppossed "genius" said the iPod is fine and it is my computer. WHAT is wrong with my computer?

Brad,
you ought a little bit more descriptive! What Version of iTunes are you using? Check the software version of your iPod (if it even has one yet) under Settings-About. Your iTunes and iPod software have to be compatible. If you're running 4.9 you need 2005-06-26. Close iTunes and leave it alone. Deinstall all iPod related software, clean the registry if you want (I don't think this is so much necessary for the iPod software). Then install 2005-06-26 again on your computer first!! Don't connect the iPod. After having installed it, open the Updater, then connect. Before you do that and since you don't have any music on the iPod reset it to factory settings under Settings-Reset all settings. Or at least reset it with pushing Menue and the center knob at once. Many possibilities I know, but either one will work...after that it will remain seen by iTunes and you're a lucky guy (hopefully).
Best regards
Roman

I have added an iPhone 4 to my household and the wifi in our home no longer works for my iPhone 4S or the new iPhone 4. Both will connect to the wifi, but we are not able to view anything i.e. google just runs circles, app store just runs loading, gps on

I have added an iPhone 4 to my household and the wifi in our home no longer works for my iPhone 4S or the new iPhone 4. Both will connect to the wifi, but we are not able to view anything i.e. google just runs circles, app store just runs loading, gps on maps not found just runs? I have check all wifi issues with ATT&T, Verizon network all believe that it is the phones? I am confused as my 4S worked fine before adding the 4 to the mix....any thoughts are hits to what to do

Have you rebooted your home router?

PS 2013 - Changing the formula in custom field not reflected in the report columns

Hi,
The company where I work have a Sharepoint environment / EPM 2013 with about seven hundred registered projects.
We have a customer demand where it is necessary to change the formula of one of the custom fields of the environment. This field is used in some management reports made in Reporting Services and accessed by the entire board. The report uses as a source
'MSP_EpmProject_UserView' view.
The change in formula was simple, but we found that the change will not be reflected in the reports when the user saves the project in Sharepoint or publish the schedule associated with the Project.
I believe this is the expected behavior of the EPM, but I wonder if there is some other way than through the PSI, to publish all environmental projects.
Best regards,
Armando Machado Gonçalves - Sharepoint / EPM 2013

Hello,
That is expected, it will not update until the project is open and republished. No automatic way to do this without automating project pro. Publishing all projects via the PSI wont cause the plan to recalculate, the plans will need to be opened.
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS

Changes to password are not reflected immediately in the application

Hi All,
If I change the password either from the console or through the application
itself, the change are not reflected immediately. They are reflected when I
shutdown both the admin server and managed server and bring them up. I think
the previous password is cached somewhere. If so, how to refresh it. When I
am changing the programatically ie using
User.changeCredential(oldPassword,newPassword);
I am refreshing the realm by using RealmMBean.refresh() . But it is not
working. Right now i am using default file realm. Can anyone tell what i
am missing here
Thanks in advance
Suresh

Suresh,
If your custom user extends DefaultUserImpl then you can update the password
in that instance within the method User.changeCredential(...) as
Construct the userinfo object with the old password
Authenticate the user against the realm with the userinfo -- returns the
customuser
customuser.setCredential( ** new passsword**) (setCredential method of
DefaultUserImpl)
update the file/database
Hope this works.
-- Sunny
"Suresh Done" <[email protected]> wrote in message
news:3b4a4d7e$[email protected]..
Hi All,
If I change the password either from the console or through theapplication
itself, the change are not reflected immediately. They are reflected whenI
shutdown both the admin server and managed server and bring them up. Ithink
the previous password is cached somewhere. If so, how to refresh it. WhenI
am changing the programatically ie using
User.changeCredential(oldPassword,newPassword);
I am refreshing the realm by using RealmMBean.refresh() . But it is not
working. Right now i am using default file realm. Can anyone tell what i
am missing here
Thanks in advance
Suresh

Changing .include structure does not reflect in the original Table.

Hi Experts,
I have a .include structure by name SDOKLO_INC referenced for table SRMTST07.
As a part of unicode conversion, I have to Uncheck the Text Lang check box of Datalement SDOK_MSLAN. Hence I opened the structure of SDOKLO_INC and did the changes.
As the structure is included in the table SRMTST07, it should reflect in the table also.
But that is not getting reflected.
Even I have properly activated using SE14 --> Adjust and Activate Table.
Could you please throw some light..
Thanks & Best Regards
LRaghunahth

Hi,
This seems strange.
As data element is activated, it should be reflected whereever it has been referenced.
Can you please double check whether the data element is active with latest changes?

Changes in local storage not reflecting in the mail client

I am trying to make changes to INBOX file in the local machine in the profile folder and trying to see if the changes are seen when the thunderbird mail client is open. But I am not seeing any changes. Where the same with SENT file is seen.
What could be the reason? what prevents me from seeing those changes?
I am using Ubuntu 13.10 OS, Thunderbird 26.4.0 version. Mail settings are POP.

HI Aditya ,
This is reference to the question you have been answering on SDN. I hope I do not cause inconvenience to ou by emailing you on your personal email id.
Please be so kind as to help me out .Your guidance seemed to be leading to a solution.
According to your last reply I have confirmed the following
1. Select Layout is not present in Test/ Integration environemtn
2. Codes in all includes of program between DEV and Test environments are exact
3. Here is the code I have used in displaying my ALV
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      I_CALLBACK_PROGRAM     = GV_REPID
      IT_FIELDCAT            = LT_FIELDCAT
      I_CALLBACK_TOP_OF_PAGE = 'TOP-OF-PAGE'
     I_SAVE                 = 'A'
    TABLES
      T_OUTTAB               = I_OUTPUT[]
    EXCEPTIONS
      PROGRAM_ERROR          = 1
      OTHERS                 = 2.
Can you guide me as to where the default layout is being set up ?
Thank you so much for your help.
Regards,
Inesha

Metadata changes in Lightroom are not reflected in Premiere Pro C

Hello everyone. I am having trouble with my current workflow. I am shooting RAW with a Canon 7d using Magic Lantern. I use raw2cdng to transform the mlv(raw) files to cdng. I then use lightroom to color correct my DNG files. I use lightroom to save the new metadata info to my files. Those changes that I make are reflected in file explorer, but when I import the files to Premiere Pro using the MediaBrowser the color corrections that I made in lightroom are not being shown. What am I doing wrong? Why is Premiere Pro not reading my metadata info correctly? I appreciate all of your help.

Changes to custom VO not reflecting

Hello All,
I created a new VO which extends standard. I did a jpximport. First time it worked. But now when I make changes to the VO files, the changes, query and new attributes, are not reflecting on the OA page. The page is picking the old version. Saw the details through About Page. Apache was bounced a couple of times still no use.
Can anybody tell me if I'm missing out anything here ?
Thanks.

You can also use functional administrator responsibility.
--Shiv

Changes after transport are not reflecting in QA and Production

Hi All,
We changed two table settings in developemnt system table names are ALMBCADM & ALMBCDATA.
We modified the table technical settings as "buffering allowed but de-activated". After we transported the change requested in QA Prod enviornment ,the changes are not getting reflected in the systems. Technical settings in both the systems are still showing as "Buffering is switched off". What could could be the reason behind this???????
Regards,
Prashant

Hi Ashok,
I have checked the CR from SE01 from objects tab , and found these entries-:
Program ID          Object Type             Object Name
LIMU                               TABT              ALMBCADM
LIMU                               TABT              ALMBCDATA
Which I suppose is correct.
Please advise.
Regards,
Prashant

The change in model is not reflected to view

Similar Messages

Maybe you are looking for