The '\' character, hexadecimal value 0x5C, cannot be included in a name. Line 1, position 29.

Hi,
Please guide i sve username="kpsoft/mahemd". It has write suceesfully but when try to read, this error raised "The '\' character, hexadecimal value 0x5C, cannot be included in a name. Line 1, position 29.". Please guide me.

Hi,
I suggest you provide more information(likethe code) for further research.
If the question is not relate to SharePoint, you can post it to a suitable Forum, you will get more help and confirmed answers from there.
Best Regards
Dennis Guo
TechNet Community Support

Similar Messages

Sharepoint 2007 list error - The '}' character, hexadecimal value 0x7D, cannot be included in a name. Line 1, position 440.

Hi Everyone,
We have a sharepoint 2007 deployment which in general has been fine since it was built.
Version is 12.0.0.6421 (MOSS 2007 SP2 (KB953334 & KB953338))
on a Windows 2003 R2 SP2 server.
We created a list a while back to store information for our servers but for some reason it now has an error.
the symptoms are:
1) Navigating to the list and choosing any view (a few custom views), we can see the data fine
2) Creating new items or modifying existing items brings up:
An unexpected error has occurred.
3) Trying to access the list settings brings up:
An unexpected error has occurred.
4) Using "view all site content" and clicking on the list brings up:
The '}' character, hexadecimal value 0x7D, cannot be included in a name. Line 1, position 440.
I've attempted to search for the error online but the error doesn't bring back anything specific to Sharepoint.
My gut feeling is either a corruption of the list or a user has entered an invalid character in one of the list entries, but I cannot amend the list in any way.
Ordinarily I would advise the user to re-create the list and enter the information from scratch, however this list contains alot of information and is crucial to the server teams documentation.
Does anyone have any ideas on where I should be focusing my search efforts? I did check the logs and couldn't see any obvious entries for this list.
Any assistance would be greatly appreciated.
Cheers,
Carl

Posted this a few weeks back - would appreciate any suggestions?
Thanks,
Carl

Error while running Configuration Wizard in SharePoint 2013: Exception in RefreshCache. Exception message :The '?' character, hexadecimal value 0x43A0, cannot be included in a name. Line 1, position 5694.

Hi Friends,
I was trying to run configuration wizard in SharePoint 2013 Central Administration and I got below error:
Exception in RefreshCache. Exception message :The '?' character, hexadecimal value 0x43A0, cannot be included in a name. Line 1, position 5694.
Yesterday my SharePoint server was running fine and today when I try to update a SharePoint solution (wsp) I got same error. Even if I try to do any operation
in Central administration like adding new WSP, Updating WSP , I get same error.
Does any one have any Idea?
Regards
Gireesh Painuly

Posted this a few weeks back - would appreciate any suggestions?
Thanks,
Carl

Name cannot begin with the '\"' character, hexadecimal value 0x22

I am trying to create Calculated Column in SharePoint Document Library using Client Object Model.
However getting following error while executing FieldSchema:
Name cannot begin with the '\"' character, hexadecimal value 0x22
Code:
var calculated = "Calculated";
var displayName = "Effective Date";
var internalName = "Effective Date";
var formula = "=IF(ISBLANK(Col_DocumentEffectiveDate),\"\",TEXT(Col_DocumentEffectiveDate,\"DD-Mmm-YYYY\"))";
List lib = clientContext.Web.Lists.GetByTitle(docLibName);
clientContext.Load(lib);
clientContext.ExecuteQuery();
string fieldSchema = "<Field Type=\"" + calculated + "\" DisplayName=\"" + displayName + "\" Name=\"" +internalName+ "\" Formula=\"" + formula + "\"
/>";
lib.Fields.AddFieldAsXml(fieldSchema, true, AddFieldOptions.AddFieldInternalNameHint);
clientContext.ExecuteQuery();
Code does't work if i replace quotation marks("\) in Formula with """
Could someone help with issue?

Hi,
I suggest you take the code below which works in my environment to do the test again:
ClientContext clientContext = new ClientContext("http://sp/");
List list = clientContext.Web.Lists.GetByTitle("List2");
FieldCollection fields = list.Fields;
clientContext.Load(fields);
clientContext.ExecuteQuery();
var displayName = "Cal2";
var formula = "=IF(ISBLANK([Created]), \"\" , TEXT([Created], \"DD-Mmm-YYYY\"))";
var fieldSchema = "<Field Type='Calculated' DisplayName='" + displayName + "' ResultType='Text'><Formula>" + formula + "</Formula></Field>";
fields.AddFieldAsXml(fieldSchema, true, AddFieldOptions.DefaultValue);
clientContext.ExecuteQuery();
Feel free to reply if the issue still exists.
Best regards
Patrick Liang
TechNet Community Support

XmlException on ExecuteQuery - Name cannot begin with the ' ' character, hexadecimal value 0x20. Line 78, position 36.

I'm getting XmlException when trying to call ExecuteQuery of the ClientContext.
I'm getting this no matter what I'm trying to load and no matter what site I'm trying to connect to.
This happens when connecting to Office365 site (tried multiple tenants and site collections).
What's strange I'm getting this on one PC (Windows Server 2008 R2 without SharePoint installed), but not on another VM (Windows Server 2012 with SharePoint 2013 installed).
This used to work on both in the past.
Could it be that one of the windows updates broke it?
Just for reference the test code is very simple and I'm calling it from a console app (same result on .NET 4.0, 4.5 and 4.5.1):
static void ConnectTest(string username, string password, string url)
SecureString securePassword = new SecureString();
foreach (char c in password)
securePassword.AppendChar(c);
SharePointOnlineCredentials onlineCredentials = new SharePointOnlineCredentials(username, securePassword);
using (ClientContext clientContext = new ClientContext(url))
clientContext.Credentials = onlineCredentials;
Web site = clientContext.Web;
clientContext.Load(site);
clientContext.ExecuteQuery();

I faced with this exeption becouse of OpenDNS.
You can try the following:
1. Use another DNS server. (prefered solution)
or
2. Add the following in C:\Windows\System32\drivers\etc\hosts:
157.56.58.43 msoid.YourSharePointName.onmicrosoft.com
(157.56.58.43 it's a one of msoid.onmicrosoft.com ips you can resolve it yourself)
for example if you SharePoint online url is org1.sharepoint.com you should add in hosts:
157.56.58.43 msoid.org1.onmicrosoft.com

The project file could not be loaded. name cannot begin with the '3' character hexadecimal value

Hi, I get this error when I want to create a custom project (from Autodesk 3ds Max SDK 2014). I really dont understand the error, I dont use any '3' character in my project name

Hi MegaJuzwa，
Based on your description, it seems that it is not the VS IDE usage issue, am I right? If so, I'm afriad that it is not the correct forum for this issue.
>>Autodesk 3ds Max SDK 2014
It seems that it is the third party tool, if so, sorry for that it is really is out of support range of VS General forum. But I found that it also has his own support site. I suggest you post this issue to this forum:
http://forums.autodesk.com/t5/3ds-max/ct-p/area-c1
I also found the simliar thread in above site:
http://forums.autodesk.com/t5/programming/getting-started-problems/td-p/4265618
If I have misunderstood this issue, please feel free to let me know.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Using PL/SQL Block how do you check if the character string value is aA-zZ

I have a pl/sql block that I prompt the user for password and I load the string into an array and interrogate each index(entry) to see if it is "aA-zZ".
How can I check if the value entered is Alpha.
I need to do the same for number and Special character. Please advise. Thanks

Thanks to All of you. The desired solution to verify complex password that enforces desired security policies. An example that I am using is the following:
IF NOT (regexp_like(sz_complex_pw,'[[:digit:]]') AND regexp_like(sz_complex_pw,'[[:alpha:]]') AND regexp_like(sz_complex_pw,'[[:punct:]]') AND regexp_like(sz_complex_pw,'[[:upper:]]'))
THEN
--dbms_output.put_line('Password is not complex...');
RAISE sz_err_pw_complex; -- Complex Password is not compliant
END IF;
DBMS_OUTPUT.PUT_LINE('Complex Password is in Compliance...');
EXCEPTION
This was helpful to me and I trust others will find helpful.
Edited by: yakub21 on Oct 16, 2010 9:05 PM

Assign hexadecimal value to an Integer variable preceding with zero

hi
i need to pass an hexadecimal value, preceding with zero (0).
like 0775
the above hexadecimal value should be assigned to an integer variable. While i am trying to assign it, the output could be truncate the preceding zero value. Is it possible to do my requirement without truncating the preceding zero.?
Edited by: sasi on Jul 23, 2012 7:09 PM

I agree on that, this can not be carried out the way you explained.
Either you store the hexadecimal value as a string, and convert it before arithmetic operations:
int number = Integer.parseInt("0775", 16);
Or you store it as an integer (no leading zero) and convert it to string as you display it:
int number = 0x0775;
System.out.printf("%1$04x", number);

Converting hexadecimal value to double Hlep needed!!!

Is there a way that I can convert the following hexadecimal value into double:
String s = "16#1234#";
As converting this to long I am doing this
if (s.startsWith("16#") && s.endsWith("#"))
extractedValue = s.substring( 3, s.length()-1 );
longValue = Long.parseLong( extractedValue, 16 );
Is there any way I can do the same and change the above to double. If I use
doubleValue = Double.parseDouble(s);
gives me an error so I want to parse the above value and change it to double any tips of work arround.
Thnaks

double doubleValue;
doubleValue = Integer.valueOf(s.substring( 3, s.length()-1 ), 16).intValue();
this works because int is big enough to handle 4 hex digits (can handle 7 hex digits safely)
then the conversion "widens" to double

Oracle xml_dom.writeToClob ignore the character set

I'm trying to generate a xml file using oracle. After generating the xml using dbms_xmldom, it is stored in a CLOB and later written to a table.
The problem is that the character set ('UTF-8') is not included in the header even though it is specified using setCharset() procedure.
Following is the oracle script,
declare
export_file_ CLOB ;
str_export_file_ xmldom.DOMDocument;
main_node xmldom.DOMNode;
root_node xmldom.DOMNode;
root_elmt xmldom.DOMElement;
begin
str_export_file_ := xmldom.newDOMDocument;
xmldom.setVersion(str_export_file_, '1.0');
xmldom.setCharset(str_export_file_ , 'UTF-8');
main_node := xmldom.makeNode(str_export_file_);
root_elmt := xmldom.createElement(str_export_file_,'TextTranslation');
xmldom.setAttribute( root_elmt, 'version' ,'1.0');
xmldom.setAttribute( root_elmt, 'language' ,'ja');
xmldom.setAttribute( root_elmt, 'module' ,'DEMOAND');
xmldom.setAttribute( root_elmt, 'type' ,'VC');
root_node := xmldom.appendChild(main_node, xmldom.makeNode(root_elmt));
export_file_ :=' ';
xmldom.writeToClob( str_export_file_,export_file_,'UTF-8');
dbms_output.put_line ( export_file_ );
end;
The output is ,
<?xml version="1.0"?>
<TextTranslation version="1.0" language="ja" module="DEMOAND" type="VC"/>
If anybody can suggest me what I have done incorrectly that will be great.
Thanks in advance.

The character set you specify via setCharset() procedure is ignored unless you use writeToFile() later.
http://docs.oracle.com/cd/E11882_01/appdev.112/e25788/d_xmldom.htm#CHDCGDDB
Usage Notes
This is used for WRITETOFILE Procedures if not explicitly specified at that time.You can also use something like this :
SQL> set serveroutput on
SQL>
SQL> declare
2
3   export_file clob;
4   prolog       clob := '<?xml version="1.0" encoding="UTF-8"?>';
5
6 begin
7
8    select prolog || chr(10) ||
9           xmlserialize(document
10             xmlelement("TextTranslation"
11             , xmlattributes(
12                 '1.0' as "version"
13               , 'ja' as "language"
14               , 'DEMOAND' as "module"
15               , 'VC' as "type"
16               )
17             )
18             indent
19           )
20    into export_file
21    from dual ;
22
23    dbms_output.put_line ( export_file );
24
25 end;
26 /
<?xml version="1.0" encoding="UTF-8"?>
<TextTranslation version="1.0" language="ja" module="DEMOAND" type="VC"/>
PL/SQL procedure successfully completed

Flat file assembler. Hexadecimal value XYZ, is an invalid character

Hi,
I'm trying to send file that contains base64-encoded string. With simple xml FTP sending - all works fine. But with flat file pipeline comes this error:
A message sent to adapter "FTP" on send port "....FlatFile" with URI "ftp://..../.../%SourceFileName%" is suspended.
Error details: There was a failure executing the send pipeline: "...., ....Pipelines, Version=1.0.0.1, Culture=neutral, PublicKeyToken=.."
Source: "Flat file assembler"
Send Port: "MyFlatFile" URI: "ftp://.../.../%SourceFileName%" Reason: '', hexadecimal value 0x03, is an invalid character. Line 1, position 100.
Pipeline:
Is it impossible to do such operation on Biztalk?
Thank you!

Try to set the appropriate value to the "Target charset" property in the Flat file assembler component. This would solve your issue.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful.

PE9 "The file is damaged or is a format that cannot be included in the Organizer"

I am trying to rebuild my Photoshop Elements 9 Organizer content after a previous computer was physically damaged beyond repair.
I reinstalled PE9 and told it to import the image files from my HDD. It imported a large number but also rejected a large number with the message "The file is damaged or is a format that cannot be included in the Organizer".
These are files which were happily resident and accessible in the previous PE9 installation on the now-dead computer and there is nothing special about them. They are almost all .JPG format (this is not a RAW or CR2 problem) and those that I have accessed by other means (e.g. with Irfanview) are not damaged.
Can someone tell me why PS9 is not able to import these files ?
Thank you.

Hi pacman110,
I was getting the same error message when importing a folder with only jpg images to PSE 9 Organizer (trial version).
Since I read a couple of threads where corrupted EXIF data was a possible reason for import failures, I changed the EXIF data - in the Windows Explorer's file properties dialog (Win 7) - to some value, applied it and changed it back again. After that the import worked fine for that file.
Later I figured out, that all images causing the error were previously tagged in Picasa 3 and later untagged - so these images actually had no tags at import. Tagging the image(s) again (in Picasa) also seemed to solve the issue.
In my case it unfortunately didn't solve the problem, because I wanted to get rid of the Picasa Tag (IPTC keyword). Therefore I removed it using the file properties dialog.
Picasa still shows the image as tagged though. Removing the - on the file non-existing - tag in Picasa results in the same issue as above. At this point the only workaround is to remove the tag in Picasa, close Picasa and set and remove some tag with Windows Explorer, which is pretty annoying regarding the amount of files.
Conclusion: removing a tag with Picasa seems to make jpg images unimportable to PSE 9 Organizer.
Workaround: Add the tag again or remove with Windows Explorer or remove tag with Picasa, close Picasa and then tag/untag the image(s) with Windows Explorer.
Maybe this helps.

How to convwert hexadecimal value '13' to character

In unicode program it is required to convert hexadecimal value to char. I do n't find any solution for converting hexadecimal value '13' to character.
Please help

You can try the following:
        CALL FUNCTION 'SCMS_BIN_TO_TEXT'
          EXPORTING
            bin_line = '13'
          IMPORTING
            text_line = lv_char
          EXCEPTIONS
            failed    = 1
            OTHERS    = 2.
        IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.

Violation of PRIMARY KEY constraint 'PK_test'. Cannot insert duplicate key in object 'dbo.test'. The duplicate key value is (12610). (Source: MSSQLServer, Error number: 2627) ?

Hi team,
How resolve the below error
Violation of PRIMARY KEY constraint 'PK_test'. Cannot insert duplicate key in object 'dbo.test'. The duplicate key value is (12610). (Source: MSSQLServer, Error number: 2627) ?
Thanks,
Ram
RAM

Hi team,
How resolve the below error
Violation of PRIMARY KEY constraint 'PK_test'. Cannot insert duplicate key in object 'dbo.test'. The duplicate key value is (12610). (Source: MSSQLServer, Error number: 2627) ?
Thanks,
Ram
RAM
There can be two reasons
1. The insert script used is having multiple instances of the records with Key as 12610 returned from the source query. If this is the issue add a logic to include only the unique set of id values for records by avoiding duplicates. There are several approaches
for this like using ROW_NUMBER with PARTITION BY, using a join with derived table etc
2. The record with Key 12610 already exist in your destination table and your script is again trying to insert another instances of record with same key. This can be avoided by adding a NOT EXISTS condition with a subquery which will check and return only
those records which doesnt already exist in the source
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

Hexadecimal value 0x12, is an invalid character. Line 1, position 247.

Hello! I'm starting with Azure, installed all new SDK, VS Updates, Win8 updates, created MVC4 proyect, executed on local Debug and Release, everything working. Downloaded the publish profile from my website validated the site, All ok! but, when i Hit Publish:
2>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\Web\Deploy\Microsoft.Web.Publishing.MSDeploy.Common.targets(55,5): Error : '', hexadecimal value 0x12, is an invalid character. Line 1,
position 247.
And i can not continue. Files where not modified, that error its from output
Ideas? Off course, my site still empty, this where my first deploy
Thanks in advance!

Hi,
Do you use MSBuild? If yes, add this to setting: <property
name="PackageAsSingleFile"
value="false"/>
For any issue for MSBuild, please open case in this forum: http://social.msdn.microsoft.com/Forums/uk-UA/msbuild/threads
Also refer:
http://blogs.msdn.com/b/webdev/archive/2012/11/20/new-web-publish-updates.aspx
Thanks,
QinDian Tang
MSDN Community Support | Feedback to us
Develop and promote your apps in Windows Store
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

The '\' character, hexadecimal value 0x5C, cannot be included in a name. Line 1, position 29.

Similar Messages

Maybe you are looking for