The Character is rough-and-tumble accessing discoverer via OEM

Dear all.
I'm new for ora9ias. I have some install questions.
In the first machine, I only installed Oracle9iAS Infrastructure. The product language included simple chinese and english. and I selected the default character set.
In the second machine, i installed oracle9ias.
Then I successfully accessed the OEM like this website http://sec.mach.com:1810.
But when i access the discoverer from the system groupware, i find that the
character is rough-and-tumble except english.
Must i use the UTF8 as character set in Infrastructure? if yes, can i change the
character set without reinstalling Infrastructure.
Please give me the answer. thank you.

Hi
You cannot embed the password on the java command line. This was determined to be a security breach because the password would have been in plain view. In order to make a URL work you need to be working with the full application server and be using either private or public connections, ideally with SSO enabled.
All you do is run the report as usual from within Viewer when connected as the user you want to be connected as. You can then copy the URL from the address bar at the top of your browser and paste this into a new browser. If a public connection is being used without SSO the report will execute. If SSO is enabled then SSO authentication is required. If a private connection is being used without SSO then the password will be prompted, whereas if a private connection is being used and you are using SSO then the password will be remembered by SSO and supplied for the user.
I hope this helps
Best wishes
Michael Armstrong-Smith
URL: http://learndiscoverer.com
Blog: http://learndiscoverer.blogspot.com

Similar Messages

Accessing discoverer via url.

Accessing Discoverer via URL.
Hi,
I'm having a problem with the following....
I am trying to setup a scheduler for generating discoverer reports, without using the discoverer scheduler. I want to be able to easily print them off in a particular location.
This is fine for normal reports with simple url's but complicated url's are causing me a problem. I have created a java program which will build the url string from some set parameters using the URL class.
Parameters include Responsibility, user name, password, workbook and the workbooks parameters.
The problem is that discoverer will not allow the request asking the user to reenter his password. Even when a site check indicates that the url is exactly correct.
I have even taken the generated url and cut and pasted it into the browser without success. I don't think it is a java issue but maybe how the system is setup.
Any help would be useful!

Hi
You cannot embed the password on the java command line. This was determined to be a security breach because the password would have been in plain view. In order to make a URL work you need to be working with the full application server and be using either private or public connections, ideally with SSO enabled.
All you do is run the report as usual from within Viewer when connected as the user you want to be connected as. You can then copy the URL from the address bar at the top of your browser and paste this into a new browser. If a public connection is being used without SSO the report will execute. If SSO is enabled then SSO authentication is required. If a private connection is being used without SSO then the password will be prompted, whereas if a private connection is being used and you are using SSO then the password will be remembered by SSO and supplied for the user.
I hope this helps
Best wishes
Michael Armstrong-Smith
URL: http://learndiscoverer.com
Blog: http://learndiscoverer.blogspot.com

How can I limit the fonts in the Character Map (charmap) and reinitialize the state after use?

In a WPF application I have a RichTextBox in which users will be inserting text. I also must give the user the ability to insert characters. To do so I have called up charmap.exe using
Process charProcess = new Process();
ProcessStartInfo startInfo = new ProcessStartInfo();
charProcess.StartInfo.FileName = strCharmap;
charProcess.Start();
etc., and it works fine. There are several problems I have basically with charmap, however, not with WPF. The first is that because of the subsequent use of the user’s insertion in the RTB, I must restrict the font to “Ariel Unicode
MS.” So far all I have been able to do is instruct and warn the user not to change fonts and
change back any font change that occurs as a result of use of “Advanced view” features.
Question number one is, how can I restrict the fonts loaded into charmap to this one font? The second problem is that if another font is called up, or the “Advanced view” state of charmap is closed, or a “Group by” feature is opened, these choices will
be retained for the next user that opens charmap. How can I initialize the state of charmap for each new user with the correct font and “Advanced view” features showing. It is said,but in old posts, that reinitialization occurs for all but administrative users,
but this seems to be no longer true. I have tried permission changes in charmap’s Properties, but I can’t get the necessary reinitialization to occur even if user’s don’t have modify permission. Can one use a .ini file, or the .mui file, or make Registry changes
to accomplish my goals. There seems to be a warning in the .mui file about changing fonts, but is it cancelled? I am using Windows 7 and C#.
I have looked at other character maps but they are either too complicated for the casual user, or they have no search engine and advanced features, or they have the same problems.
I am pretty much a novice with respect to the Windows files use and WPF, so please be fairly clear, complete, and prescriptive in your answer. Also so that I and others can learn, it would be nice to have an explanation of why one does whatever you suggest.
Your help is appreciated.

Hi,
Thanks for your post!
According to your description, I am afraid your problem is out of support in C#language forum. So i move your thread to off-topic forum!
Best Wishes!
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. Thanks<br/> MSDN Community Support<br/> <br/> Please remember to "Mark as Answer" the responses that resolved your issue. It is a common way to recognize those who have helped you, and
makes it easier for other visitors to find the resolution later.

How do I keep the Character panel open and why are my font examples fuzzy?

Hello,
I am unable to keep the character panel open while editing text. The options will not open in the top tool bar next to color and stroke. The link to the character panel is in the top bar, however, I must click it each time to open. Problem 2, is that even after opening the character panel and opening the drop down box, the 2nd column of text, the column that shows the font examples, is blurry. I've been dealing with this for some time, but had a little extra time today to ask for help.
I am using a PC and using Illustrator in Creative Cloud 2014.1.1 Release, 18.1.1(64-bit).
Julie

Hello,
Thank you for the reply. When I do Window > Type > Character still the palette opens up and I want it to actually be in the bar at the top. I just opened an ai document from one of their tutorials and the characters are now open on top. The dropdown is still wonky.
The left side is very sharp, the right side is fuzzy.

Does the user have to be the owner of CWM2 objects to access them via OLAP API?

Hi,
What are required for RDBMS users to use OLAP API? Regarding page 6-9 of Oracle9i OLAP User's Guide 9.2.0.1, following access rights are required.
CONNECT role
QUERY REWRITE system privilege
SELECT privilegs on the database objects containing the data to be analyzed
So, I created a new user TEST1 and granted all the priviges above. Then I tried to create a new crosstab using New Crosstab Wizard in JDev903_pre(OLAPConnecton is using TEST1). When I choose a measure that is created in CWM1, I could create a crosstab without problem. But when I tried to create a crosstab from a measure that is created in CWM2 by OLAPSYS user, I recieved the following error.
BIB-9509 Oracle OLAP did not create cusor.
oracle.express.ExpressServerExceptionError class:OLAPI
Server error descriptions:
DPR: Unable to create server cursor, Generic at TxsOqDefinitionManager::createCursorManager
OES: ORA, Generic at TxsRdbSelectStatement:execute()
The curious thing is that I can create a crosstab from the same measure if I use another connection that uses OLAPSYS. Does the user that connects to CWM2 using OLAP API have to be the owner of those CWM2 objects?
Thank you.
Best Regards,
Seiji

The user does not have to be the owner of the cwm2 objects to access them. Access to cwm2 objects is based on database security. Therefore, if the user is not the owner of the object (if user is the owner, they obviously have access to the object), then as long as the user has been granted access to the underlying physical object (i.e., the table the dimension or cube has been mapped to), the user will be able to access the object.

Link between SAP Ztables and MS-ACCESS database via XI

Hi All,
I have two application one is in Ms-Access and other is in SAP . I have to link the SAP ztables to the MS-Access databse, is this be done with via XI. If yes, do i need to write the interface programs while fetching the data from the XI to SAP, or XI will take care of the updation and linking between the SAP and access application , since the cross flow of data between two application will be there .
Regards
Gajendra

hi !!
It is possible with XI, of course.
You can use jdbc as sender at the MS-Access end and at R/3 (as reciever) you can have an RFC to put the data into the tables.
There is no need of interface programming to be done manually.
you have to be clear at what condition the synchronizations should happen and there is more enhancements that could be done.
regards,
nikhil.
**reward if helpful

HT5361 I am about to slit my wrists trying to disable what seems to be widgets. Every time the mouse goes to the edge of the screen it fades and "provides" access to completely unwanted - even hated - widgets. Where is Steve Jobs when you need him?

I offiially hate our mac. Would work with a PC in a heartbeat.

Are you referring to the Dock?
If it is the Dock that is bothering you, type: command, option, D (all three keys together). That will bring the Dock on the screen permanently.
I do not know how to remove it permanently.

Samba and Solaris, access slow via XP

Hi everyone,
I've new to solaris and I've installed 10, update 5. I've configured samba (very badly I believe) so that I can access my solaris box from my XP 64 computer.
Both are on a local network (connected via a Belkin router) and in the same workgroup. I can see the XP machine from solaris, but not access anything (I just get a 'cannot show contents of directory' message). This is not my main problem, since I mostly want to access the solaris system from XP (I want to set up the solaris box as a RAID Z NAS). This works to a degree. I can see and access my solaris filesystem from XP. Hurray. I have two problems:
1. I have set guest to NO, but I never get asked for a password (I've set up an account on the solaris system with a password using smbpasswd). I just get access. Why is this? I don't want a bunch of ner-do-wels skulking about my server and erasing files and such.
2. While I can stream music fine, after a minute or so, if I want to browse files from XP it stalls for about one minute (I think it is re-logging in) and while this happens any music being streamed stops. How do I stay connected and logged in? Here is my smb.conf:
# Samba config file created using SWAT
# from 192.168.2.3 (192.168.2.3)
# Date: 2008/05/11 18:46:15
[global]
     socket options = TCP_NODELAY SO_KEEPALIVE IPTOS_LOWDELAY
     ldap ssl = no
[home]
     read only = No
     guest ok = No
     available = No
[homes]
     valid users = %S
     read only = No
     guest ok = No
As you can tell I'm pretty new to all this so you may have to dumb down your answers a little. Thanks for the help.
Cisco

Yup.....repeatable!
Delete mapped drive.
Connect via USB
Playbook shows in windows explorer as PlayBook [Pin: number] Y: being the drive that XP has mapped it to.
Then search for the PlayBook by ip address \\192.168.1.x
It shows up under workgroup by its ip address
Disconect USB cable
Workgroup connect remains (via wifi)
Strange to say the least.

I have a terabyte of movies that I would like to put on a the cloud so that I can access them via iTunes anywhere. The movies are almost all .avi. I have tried to drag them to my iTunes on my laptop but have not been able to transfer 1 single file.

Can anyone help me import .avi movies to a cloud drive so that I can play them on my iPad when I'm traveling. It is one of the only reasons I purchased the thing and I cannot figure out how to access my personal movie files from a "cloud" drive.

To get that much storage, you need to look to professional online services. Pro-level hosting accounts may offer you that much (well, many will offer as much storage as you are prepared to pay for), or Amazon professional cloud services. You could also store the files on a home machine and pay for a professional hosting service so you could stream them over your own account (assuming your ISP connection and agreement allows for the bandwidth used). You would still need to deal with the issue of finding an app for the iPad that supported avi streaming.

Configuration the connection between portal and srm server only via JDBC

Dear all:
   We want to implement the SRM server and present the supplier web/page in the portal server. Our SRM and portal server install in intranet network.
   For internal employee use the SRM server and the Supplier access the portal server via Internet, we install Web Dispather in DMZ to exchange the HTTP request.
     Network TOP like this :
    SRM server--Portal||FireWall||-Web Dispatcher--Supplier
(--Internal|firewall--|DMZ|-Internet )
The question is : Between DMZ zone and our internal network zone ,there is the firewall and it only allows JDBC protocol (SQL statements or result set) to pass. Other protocol and port could not pass this firewall.
So ,it seems that no way to implement this ,right? Or any other way to implement it ?

thanks

Am I the only one who can't access gmail via Safari?

I am on 10.5.8 and Safari 5.0.6 and must wait 15 to 20 minutes before the address field progress bar gets to http://www, other online sevices [ like going here ] work well. Has anyone else seen this?

Also...
"Visual Voicemail is currently unavailable" and my Greeting button is grayed out and deactivated.
I can call in to check it just fine but VisVM is not working either.
FYI...
::LL::

Build the connection between Arduino and Flex 4.0 via JSON

Hi,
I try to make a connection between arduino and Flex 4.0, I included the JSON lib and also as3corelib.swc to Flex. When I run the Flex file the connection between PC to arduino is working (I can see it in SERPROXY window) and also I don't have any problems in Flex window, I added the SWF file of Flex to the list at //http://www.macromedia.com/support/documentation/tr/flashplayer/help/settings_manager04.htm l, Bu the reading result is not shows in the SWF,    I couldn't understand why !, thanks for help
here the code
package
import com.adobe.serialization.json.JSON;
import flash.display.Sprite;
import flash.errors.*;
import flash.events.*;
import flash.net.Socket;
import flash.text.TextField;
public class deneme extends Sprite
{private var magnetic:Socket=new Socket("localhost",5331);
private var magneticValue:Number=0;
private var distance:Number;
private var newText:TextField=new TextField();
private var listText:TextField=new TextField();
private var MNx:Number;
private var MNy:Number;
private var MNz:Number;
private var d:Object={"x":null, "y":null, "z":null};
public function deneme()
   socketDataHandler();
private function socketDataHandler():void
   newText.text=magnetic.readUTFBytes(magnetic.bytesAvailable);
   d= JSON.decode(newText.text);
   MNx=d["x"];
   MNy=d["y"];
   MNz=d["z"];
   listText.x=10;
   listText.y=10;
   listText.width=600;
   listText.height=100;
   listText.text=newText.text;
   addChild(newText);

package
{    import com.adobe.serialization.json.JSON;
import flash.display.Sprite;
import flash.errors.*;
import flash.events.*;
import flash.net.Socket;
import flash.text.TextField;
import mx.rpc.events.ResultEvent;
    public class deneme2 extends Sprite
        private var newText:TextField=new TextField();
        private var listText:TextField=new TextField()
        private var magnetic:Socket=new Socket("localhost",5331);
        private var MNx:Number;
        private var MNy:Number;
        private var MNz:Number;
        private var d:Object={"x":null, "y":null, "z":null};
        public function deneme2()
             magnetic.addEventListener(ProgressEvent.SOCKET_DATA,getDATA);
         private function getDATA(event:ProgressEvent):void
            newText.text=magnetic.readUTFBytes(magnetic.bytesAvailable);
            d= JSON.decode(newText.text);
            MNx=d["x"];
            MNy=d["y"];
            MNz=d["z"];
            listText.x=10;
            listText.y=10;
            listText.width=600;
            listText.height=100;
            listText.text="X="+String(MNx)+" Y="+String(MNy)+" Z="+String(MNz);
            addChild(listText);

Ask the Expert: Plan, Design, and Implement Mobile Remote Access, the Cisco Collaboration Edge Architecture

Welcome to the Cisco® Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about planning, designing, and implementing mobile remote access (Cisco Collaboration Edge Architecture) with Cisco subject matter experts Aashish Jolly and Abhijit Anand.
Cisco Collaboration Edge Architecture is an architecture that provides VPN-less access of Cisco Unified Communications resources to Cisco Jabber® users. This discussion is dedicated to addressing questions about design best practices while implementing mobile remote access.
For more information, refer to the Unified Communications Mobile and Remote Access via Cisco VCS deployment guide.
Aashish Jolly is a network consulting engineer who is currently serving as the Cisco Unified Communications consultant for the ExxonMobil Global account. Earlier at Cisco, he was part of the Cisco Technical Assistance Center (TAC), where he helped Cisco partners with installation, configuring, and troubleshooting Cisco Unified Communications products such as Cisco Unified Communications Manager and Manager Express, Cisco Unity® solutions, Cisco Unified Border Element, voice gateways and gatekeepers, and more. He has been associated with Cisco Unified Communications for more than seven years. He holds a bachelor of technology degree as well as Cisco CCIE® Voice (#18500), CCNP® Voice, and CCNA® certifications and VMware VCP5 and Red Hat RHCE certifications.
Abhijit Singh Anand is a network consulting engineer with the Cisco Advanced Services field delivery team in New Delhi. His current role involves designing, implementing, and optimizing large-scale collaboration solutions for enterprise and defense customers. He has also been an engineer at the Cisco TAC. Having worked on multiple technologies including wireless and LAN switching, he has been associated with Cisco Unified Communications technologies since 2006. He holds a master’s degree in computer applications and multiple certifications, including CCIE Voice (#19590), RHCE, and CWSP and CWNP.
Remember to use the rating system to let Aashish and Abhijit know if you have received an adequate response.
Because of the volume expected during this event, our experts might not be able to answer every question. Remember that you can continue the conversation on the Cisco Support Community Collaboration, Voice and Video page, in the Jabber Clients subcommunity, shortly after the event. This event lasts through June 20, 2014. Visit this forum often to view responses to your questions and the questions of other Cisco Support Community members.

Hi Marcelo,
Yes, there are some requirements for certificates in Expressway.
Expressway Core (Exp-C)
- Can be signed by either External or Internal CA
- Better to use a cluster name even if you start with 1 peer in Exp-C cluster. In the future, if more peers are added, changes would be minimal.
- Better to use FQDN of cluster as CN of certificate, this way the traversal zone configuration on Expressway-E won't require any change even if new peers are added to Exp-C cluster.
- If CUCM is mixed mode, include security profile names (in FQDN format) as Subject Alternate Names
- The Chat Node Aliases that are configured on the IM and Presence servers. They will be required only for Unified Communications XMPP federation deployments that intend to use both TLS and group chat. (Note that Unified Communications XMPP federation will be supported in a future Expressway release). The Expressway-C automatically includes the chat node aliases in the CSR, providing it has discovered a set of IM&P servers.
- For TLS b/w CUCM, IM-P & Exp-C
+ If using self-signed certificates on CUCM, IM/P. Load Cisco Tomcat, cup, cup-xmpp certificates from IM-P on Exp-C. Load callmanager, Cisco Tomcat certificates from CUCM on Exp-C.
+ If using Internal CA signed certificates on CUCM, IM/P. Load Root CA certificates on Exp-C.
+ Load CA certificate under tomcat-trust, cup-trust, cup-xmpp-trust on IM-P.
+ Load CA certificate under tomcat-trust, callmanager-trust on CUCM.
Expressway Edge (Exp-E)
- Signed by External CA
- Configured Unified Communications domain as Subject Alternate Name
- If using a cluster, select FQDN of this peer as CN and FQDN of Cluster + this peer as Subject Alternate Name.
- If XMPP federation is being deployed, enter the same Chat Node Aliases as entered in Exp-C.
For more details, please refer to the Certificate Creation Guide for Cisco Expressway x8.1.1
http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/expressway/config_guide/X8-1/Cisco-Expressway-Certificate-Creation-and-Use-Deployment-Guide-X8-1.pdf
- Aashish

I was using 3 version, downloaded 3.6 and cannot access my ADP files. Can I get the #3 version back.

I was using the #3 version, downloaded the 3.6 version and cannot access my ADP files now. Can I get the 3 version back?

A possible cause is security software (firewall) that blocks or restricts Firefox without informing you about that, maybe after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox.
See [[Firewalls]] and http://kb.mozillazine.org/Firewalls
See also http://kb.mozillazine.org/Browser_will_not_start_up

I am so sick of the crappy way iTunes and iPad handle app folders.

I'm a long-time iPad user who, for various reasons, has accumulated over 500 apps. It is absolutely essential that I keep my apps organized into folders. This requires a lot of folders, too: with a maximum of 20 apps per folder, that's at least 25 folders.
What prompted this message is that after the last time a major software update decimated my carefully-constructed folder organization (which itself is inexcusable), I spent two hours with the horrible iTunes interface dragging and dropping and creating new folders and getting everything re-organized, finally, only to have iTunes fail to sync the changes to my iPad.
It synced, but afterwards, the iPad still had its old folder layout, and iTunes still indicated the new one. I power-cycled the iPad and tried syncing again: same thing. I quit and re-launched iTunes and synced again, and lo, iTunes wiped all the tedious work I'd done and just copied the defective organization back from the iPad into iTunes.
This isn't a one-time thing. It's consistently been the most time-consuming, time-wasting aspect of owning an iPad, and really, it's inexcusable for Apple to have let this go on and on for so long.
Why not just let them float free instead of constantly hitting my head against the "folder wall" and gradually move the ones I use a lot to early pages? Well, it turns out that if you have too many apps installed, the iPad doesn't show them all: there's a limit to how many pages of apps it will show. Dang it.
Why not use the search page to get to my apps? Well, I could, but some of them are named in unfortunate ways. (Also, when you search for an app, it doesn't indicate whether it's located in a folder nor in which folder it's located. That's not just stupid: it's caused me to go manually poking through folder after folder to find an app that I've "mis-filed".)
And if you have multiple iDevices? I recently jumped from Android to iPhone, and guess what: I had to go through the whole, pain-staking process of creating a folder organization for the phone, because I couldn't use the iPad's as a template. I did learn my lesson, though: the iPhone only has installed the apps that I use on a regular basis. At least that cuts down on the length of the pain if not the intensity.
C'mon, Apple, get a clue! This app folder "organization" is about as crappy as it gets. (Though you have a bad history of poor organization: how long did it take to get photo albums?) Please, please, please, if you can't at least get the novice-programmer-stupid-bugs out of your folder sync/iTunes logic, come up with an alternative.
Here, I can think of a REALLY EASY one right off the bat: let me tag my apps and search/access them via tags. (Oh, say, then maybe I could just have a "smart folder" to make them easier to find.) (What? Be able to organize apps in more than two dimensions?) Or at least make the drag-and-drop-to-move-apps interface (on both the iPad and iTunes) less fragile and frustrating.
Back to bashing my head against the wall... thanks for listening.

I've had a not-so-rewarding experience with one of Apple's support-issue-submission forms. It was a reminder that as much as I'd prefer to think otherwise, Apple may be unusual, but it's just another company where it's not possible for everyone to be "above average".
Frankly, I'd be happy in this case if iTunes dropped an XML file with apps-in-folders, let me mess with it, and then loaded and applied it to shuffle things around. That's one thing I love about OS X, but then that also allows one to be too smart for one's own good. Be careful what I ask for, I guess...

The Character is rough-and-tumble accessing discoverer via OEM

Similar Messages

Maybe you are looking for