The character mode report in develpoer 10gsuit

how does we can call the character mode report in develpoer 10gsuit.
if anybody know please
define full procedure
Thank You in Advance

Similar Messages

Character Mode Report in 11gAS

We have recently migrated our system
from 2-tier (Forms 6i/Oracle 10g)
to (Forms 10g/11gAS/11g DB)
We have a lot of Character Mode reports which were developed using reports 6i earlier.
These reports were printed on Dot Matrix Printers or Line Printers.
Now these reports have been migrated to Reports 10g running on 11gAS.
We are facing a problem
The character mode reports which now generate in IE is creating a problem when we take print from Line Printer or Dot matrix printers.
Some how the page break is not working and rport content is overlapping pages.
We now instruct user to manually "adjust margins" in page setup and then fire print. SO page over lap s rctified MANUALLY.
Need inputs on how to match report print to the same as that used to come from reports 6i live peviewer

We have recently migrated our system
from 2-tier (Forms 6i/Oracle 10g)
to (Forms 10g/11gAS/11g DB)
We have a lot of Character Mode reports which were developed using reports 6i earlier.
These reports were printed on Dot Matrix Printers or Line Printers.
Now these reports have been migrated to Reports 10g running on 11gAS.
We are facing a problem
The character mode reports which now generate in IE is creating a problem when we take print from Line Printer or Dot matrix printers.
Some how the page break is not working and rport content is overlapping pages.
We now instruct user to manually "adjust margins" in page setup and then fire print. SO page over lap s rctified MANUALLY.
Need inputs on how to match report print to the same as that used to come from reports 6i live peviewer

Character mode report with 0 KB

There is one more problem , which we are facing now, the character mode reports are now coming with 0kb size, we are using the orarrp.exe for remote printing utility. If same report is generated using desformat as PDF, then it comes.
OS:Win 2k
AS:9i AS R2
Using ORARRP for report generation.

In the Layout Model, Header Section or Main Section or Trailer Section's properties according to which section you are referring to.
I think this is new with Reports 6i.

Prin character mode report (do not want to use Samba)

Helo,
i need input from someone experience implement oracle reports 10g for character mode report.
this is the issue :
1. Client doesn't want to use Samba cause some security issue.
2. Because of issue no.1 we can not use file sharing or printer sharing to communicate server with client pc
3. Our application is swing based app with Oracle ADF JClient framework.(we can't use MIME types)
What choices do i have ? please help.
Thank you,
Ricky H.P.

so what's the question ? how to print to the character mode report or how to print to the local printer ?
thanks,
ph.

How to make character mode reports in reports 6

iam finding difficulty in setting the properties for the character-mode reports in reports 6.0!!how do i preview and print character mode reports in landscape mode
(132*66)
thanks in advance.
jitendar

thanx very much for ur advice sasha !!
i changed the layout model to character mode but the main problem is that how do i change the pagesize of the screen to 132*66!
at presenti can view only 80 chars screen!
is there any answer to it !!! can i change this setting so as to view my 132 column report on the screen first and then print on the printer !!
thanking in advance,
jitu :-)

6i character mode report migrate to 11g , printing result were incorrect in the same matrix printer?

Hi All
We got stuck when our 6i character mode report migrate to 11g.
We use the same PC to test, when run 6i report(character mode with 200 column) in legacy system, report result were correct in our matrix printer ,
When running in 11g, if we directly print report via report builder (without preview), result were correct.
But running report via preview/screen mode, printing result were incorrect ( not 200 column width).
We try to adjust PC's printer/paper setting , but our-defined printing option never appeared in printer dialog.
Is anything(config or some setting) we forgot to do in this situation ?
Thanks for all your patient response!
Hendry

Hi Shahmayur,
I too am facing the same problem. If your problem is cleared then please let me know, so that i can continue the work.
Rgds
Bhaskar

How to send a character mode report from Oracle Form 10g to a printer.

how sending a character mode report from Oracle 10g report to a printer.
I'm sending to a printer located in the network
i have theses parameter report
desformat = prtname
desname=??????
destype= ?????
mode=character
i would like to preview the report before to send to a printer
slds

ACCOUNTING SYSTEM
2006-2007 From Date : 01-JUL-06
Printed On : Friday August 31 2007 11:13 AM To Date : 30-SEP-07
G A/C. Code 99-99-9999 Description: xxxxxxxxxxxxx H
-- DOC. # -- -- DATE -Chq/Slip# ---------- N A R R A T I O N -- -- DEBIT -- -- CREDIT -- -- BALANCE --
Opening Balance: -999,999,999.00 Cr.
G *** Total *** 0.00 0.00 -999,999,999.00H
================= ================= =================
when i run character mode report in browser then display this output properly
but sir problem is that when i print the report
G(use for bold)
is not working
means not print in bold format in printer
same character print G
do you have any idea when i print through browser to printer G for bold purpose its work to printer ?

Character Mode Report Print in Developer 6i

How i can create character mode reports for efficeint printing on dot matrix printers. I m not asking about the Character Mode Template(in the report wizard). And how i can convert the existing reports to Character Mode.
I am using Reports 6i.

Please post this question in the Rpeorts forum: Reports

How to Apply XML PArtial definition in Character mode report

Hi All
I want to apply some XML code definition in Character mode report The same XML is working fine in Bitmap
Plese give me some idea.

Any update? .please give some idea..... members..plz

Linebreak Code in Character Mode Report

Dear All
I m saving a Character Mode Report which is 132 column Wide, and i can access that report in Note Pad in proper format and alignment but when i m use WORDPAD, it open in un aligned format i mean with line break.
so any one can give me any Idea so i can open that report in WORDPAD too.

Take a look at the .prt file that you are using. The linebreak code is stored in there and you can alter it to the appropriate code for your printer/platform/application to view correctly.

Font Size in Character Mode Report

Hi ,
I have to print a report in a pre printed Stationary, which has tabular columns The columns are little bit small . when i have bigger data say value like 9999999.45 it over prints on the pre printed text. is it possible to reduce the size of the data at these places and be normal in other parts of the report.
i.e. Font size reduced inside the tabular column and normal for the remaining part of the report
Will appreciate the help

Font size in character mode report cannot be control through Oracle Report.
 
You can use report .prt file or manually set the printer to print character in small size.
 
Raj 
www.oraclebrains.com<a>
 POWERED by the people, to the people and for the people WHERE ORACLE IS PASSION.

Update column in Character Mode Report

Hi,
I hope so you all r fine.M facing a problem in character mode reports.i want to increase width of item field but when i opens paper layout of rdf there is no such colum.actually this column depends on parameter value.but am astonish how it is displays when it is not exist.
Can anybody help me.
Report name:Transaction Register
Column:Item Description
Regards,
Shakeel

but am astonish how it is displays when it is not exist.So am I ;-)
I'm sure it exists. If the data model uses a lot of lexical parameters, it may be confusing to figure out where the data comes from. Without any more information on your report, it is impossible to tell.

Problem in Character Mode Report (Urgent)

Dear All
i m designing a character mode report
and when i preview it ,,, it will display
different report font which is big in size
and width so it is not fit in the designed columns
can any one help me ,, y this problem is exist
though i m using Dot matrix printer EPSON DFX-8500
printer.

Hi..
If you are directly giving Print from previewer..you need to set printer to 10 cpi (if you want bigger font) and 12 dpi to compress the larger font..
CPI is character per inch so in one inch 10 chr or 12 chr can fir acc to setting.
If you are uploading file on Oracle Apps then you need to set fonts if needed in concurrent manager,printer setting,Style,fonts ..
"But the hardware setting is vewry imp..set the font in DRAFT mode"..
tarak desai
[email protected]

Character mode Report in Landscape Format

Hi All,
I want to print my character mode report in landscape format. But I am not getting it. Everytime I get print as Portrait. I am printing from live previewer of report builder.
I am using Oracle 9i and Report builder 6i (6.0.8.11.3).
I have done following settings:
System Parameter ORIENTATION=Landscape
DESFORMAT=DECLAND.PRT (Given by Oracle)
In the object navigator I have set following properties for Main Section
Width=11
Height=8.5
Orientation=Landscape
Char Mode Width=132
Char Mode height=66
I have done same settings for Header Section and Trailer Section. Please help me.
Thanks in advance.
Regards
Mona

You will need to edit prt files to add the printer escape sequences to change the page orientation to landscape. Printer escape sequences can be obtained from the printer manual, or the printer vendor.
For instance, HP printer escape codes can be obtained from the HP website under the printer support links.
The steps below describe how to print a landscape, character mode report from a Windows NT PC on an HP 4100N Printer. The 4100N is a dual mode printer that can use either PCL or Postscript printer language.
1. Use a web browser to navigate to the HP website and obtain the printer escape codes for the HP 4100N. If you are unable to locate the HP4100N printer, look for generic PCL information. The HP site also includes detailed information on the printer command syntax.
2. The HP4100N printer command for landscape page orientation is "ESC&l1O" - where ESC indicates escape, '&' (ampersand) is the parameterized character, 'l'(lower case letter l) is the group character, '1' (number one) is the printer value character and 'O' (upper case letter O) is the termination character.
NOTE: The HP documentation uses "EC" to signify the escape character.
It also suggests pressing CTRL and the letter P together, then
releasing both keys and pressing the ESC key. If this is done in
a dos editor, a left arrow will actually be displayed on screen.
This character cannot be interpreted by Oracle Reports and will
cause printing errors if used in a .prt file. Instead, just use
the letters "ESC" to indicate that the code that follows is a printer
escape sequence.
3. Make a copy of the wide.prt file and rename it to "mywide.prt."
4. Add the page orientation escapes to mywide.prt file:
printer "mywide"
height 66
width 132
before report esc "&l1O" *** Puts Page in Landscape Orientation***
after page control(L)
after report esc "&l0O" *** Resets page orientation to Portrait ***
return control(M)
linefeed control(J)
SYNTAX NOTES: The escape sequence must be enclosed in double quotes ("). The above comments regarding page orientation are used to clarify where the escape codes gets added, but they should NOT be used when editing
the actual .prt file.
5. Save mywide.prt file to the $ORACLE_HOME\report60\printers\ directory.
6. Go to Windows PC -> Start -> Settings -> Printers and open the properties for the HP printer. Ensure that the option to "Always Spool Raw Data" is checked. This option is usually under the General Printer
Options, or Spool Options. On Windows NT, you must have Administrator privileges to change this setting.
7. Test running the report to the printer and specify desformat mywide. It is not necessary to include the file extension (.prt).
8. The report will now print in landscape orientation.

Problem to print character mode report in Landscape

I set orientation and select but it still print in landscape character mode. When it print in character mode report in portrait format its ok.
I Set and use all the option in report to print in Landscape in character mode.
I ask you please to give me information about the printing definition files and its codes, how to use printer codes. I use two printers
1. Epson LQ2180 2. HP 6L
I used HPLWIDE printing definition files put its still print in portrait format not to print in landscape.
Thanks for corporation
I will wait ur reply...
At this address
[email protected]
[email protected]

Hi,
This sounds like a similar problem that I had (and still having). It was (is) a Bug. Go to metalink.oracle.com and reference this bug#1413754. See if this is your problem as well. My only work around was change the format of the file instead of using character mode I am now using PDF. Which is working fine for me.
~Vannette

The character mode report in develpoer 10gsuit

Similar Messages

Maybe you are looking for