The charts are cleared when viewing a front panel remotely
Every time when a new client connects to the Web Server with the intention
to view a front panel remotely using a Browser, the charts are cleared on
server and all connected clients. Just the same happen when the user on
client computer pushes the refresh button in Browser. This behavior is new
to LabVIEW 7 and was not was noticed in LabVIEW 6.1.
How to prevent this behavior in LabVIEW 7?
Thank you
Bojane,
This is a known issue with LabVIEW 7 with charts and remote panels. Our R&D engineers are aware of the issue, and are working on the solution for the next release of LabVIEW. For now, the only workaround is to use graphs instead of charts.
Zvezdana S.
National Instruments
Similar Messages
-
I am using IDVD to create slide shows. When viewed on my computer, the pictures are clear and of high quality. When I burn the slide show to a disk and play it back, the pictures are blury and of poor quality. Is there a setting that controls the quality of the burn and if there is, where do I find it? Thank you.
The Mac software - iPhoto, iMovie, and iDVD are not the best with the Ken Burns effect (zoom in/out effect), so you might want to minimize that effect; also, if your subjects are wearing stripes for instance, that will have an effect if you zoom. There is better software available for slideshows; however, I do not know of any that is free (and does a good job). I've used Photo to Movie for some time; it does a fine job even in HD, but you have to pay for it. I use iDVD extensively, but only to add a menu, theme, special effects, etc. and then to burn it.
-
I am using IDVD to make slide shows. The pictures are clear and of high quality when viewed on my computer. When I burn the slide show to a disk, the pictures are blury and of poor quality. Is there a setting adjustment to correct this problem?
I would re-post in the iDVD forum. You are likely to get a faster answer there. Good luck.
-
I have an iPod 5thGen 30 GB. My tracks on my playlists are rarely in the correct order on the iPod, tho the order is correct when viewed on iTunes. Is there anything I can do?
It goes by the Track # field, as seen in on a list in iTunes. So, make sure the Track # field is correctly entered for each song when you review the album on a list in iTunes. Also, make sure the Album field is entered identically for all the songs on the album.
You can edit those fields by doing a Get Info on a song, and going to the Info windows's Info tab, -
Suddenly all my albums in Photos are blank. The photos are still in the camera roll but not in the albums. What happened and how do I recover them all? Are they in my icloud? Also the photos are clear as thumprints but when I touch it to zoom are blurry. what gives? They were all completely clear and in the albums when I last used my ipad?? Would doing the "Reset" under General settings do that? When I returned from Europe I reset my ipad to get it in the right time zone etc.
Reboot. Press and hold the home and sleep buttons until the apple logo appears. Ignore the red slider.
-
The ipad music app does not allow me to play certain tracks that i have synced via my itunes. The tracks are clearly visibly in the music app but when tap on them to play they wont play. what do i do?
Agree about the disaster part. I haven't found a fix within iTunes.
I gave up and switched to downcast 2 days ago. Even though it was a hassle to re-subscribe to all my podcasts, im so much happier.
To make switching easier, I found that in iTunes you can "get info" on the podcast and copy the RSS address to the clipboard. Put all of these in a message note. When iCloud syncs the note to your phone, you can copy and paste the urls into downcast one at a time to subscribe.
Downcast has crashed on me occassionally when I'm subscribing to feeds, but so far it has recovered gracefully each time and no data was lost. -
My images in my welcome page are different when viewed on the internet!
My images in my welcome template are different when viewed on the internet! After a while they don't change anymore. Isn't this so basic....?
Please provide your url so someone can see what you are talking about.
-
How do I correct blurry pictures in iMovie? They are clear when I pause the video but blurry when playing the video.
Try sharing and see if the effect is still present when you play the shared movie. It can happen when playing within iMovie if there are insufficient resources to play a full resolution.
Geoff. -
Iphoto gives message "no images were selected" when hit print button. Yet the the images are clearly selected in the print window. I've printed hundreds of images without a problem before. Iphoto 6.0.6, MAC 10.5.8, Suggestions?
I have recently started having this problem in PSE8. The Adobe workaround
did work, but I don't fancy having to re register each time I use it.
What I have discovered is that it's nothing to do with the image metadata as it occurs before any image is opened.
It SEEMS to only occur if you use file/open with to open an image in the editor - IE start PSE with that command.
If you close elements down, and start it using programs/PSE/Elements (or your desktop shortcut) - the panorama feature magically works.
Each time I've opened the editor 'automatically' using image/open with, it seems to create the problem.
Hope this helps -
After creating a new slideshow I export it with the setting HD 1080p it is then saved as a .mov i then create a dvd in idvd and the quality is not as good as the original photo's when viewed on the monitor or a TV, am i doing something wrong?
DVD's are only 640 x 480 (interlaced), so yes, the quality is not nearly as good. You should probably create your .mov in DV format to best match the DVD format
-
Changing the Chart Title in Graphic View in Interactive demand Planning
Hi All,
Is it possible to change the Chart title in Graphic View in interactive demand planning screen.
When we go to interactive planning after loading the data we go to Univariate forecast then switch to graphic, the chart title shows the selection at which the planning is done. For eg; If I plan at die level and i select a particular sap material, the chart title displays Die value and not the material value.
Is it possible to change the chart title such that it displays all the selections made in selection winodw, like in the above case both Die value as well as SAP Material Number.
Thanks and Regards,
DianaDear Diana,
unfortunately this is not possible.
The chart title is build from the planning book name + the Show characteristic in the shuffler (+ available nav. attributes of the Show char).
The functionality you requested doesn't exist in standard.
Regards,
Tibor -
Photo Stream issue. Photo Stream shows 263 photos when viewed on the iMac, 289 when viewed on the iPad and 327 when viewed on the iPhone. How can this be? Tried shut down on all devices, reboot and the results are the same.
Photo Stream issue. Photo Stream shows 263 photos when viewed on the iMac, 289 when viewed on the iPad and 327 when viewed on the iPhone. How can this be? Tried shut down on all devices, reboot and the results are the same.
-
Old applications are pixelated when viewed on my new laptop?
Hi I've got a new MacBook Pro with retina display and I'm having issues with some older applications, such as Adobe CS5 and Microsoft office (2011) are pixelated when viewed on my new laptop. How can I fix this?
There are only a few apps that have been optimized for retina display, all other apps, including CS5 and Office are basically zoomed up to fit the 2880x1800 screen.
Apple once again ahead the times ! -
Why some extra XML tags are created when viewed a XML in Adobe Illustrator with Esko plugin?
We see some extra XML tags are created when viewing a XML in Adobe Illustrator with Esko plugin. Why these extra lines are created ?
Screenshot of XML and XML viewed in AI below(the extra XML tags outlined in red):Hi Graffiti,
Thanks so much for your resply. I am happy to say that the problem has been fixed by my customer updating her version of Adobe Reader 9 to the latest version. I had sent her a few suggestions on how to try to fix the problem including that one from info I had read on the forum etc.. and that was the solution that worked. I am so relieved that I was able to fix the problem and to answer your question the blank pages were only graphics no text but they were the only pages that the graphics took up the whole page. I thought that was strange and had her change a setting in preferences for printing large images a solution I read in the forum but it did not work. -
The formatting of emails on my iphone 5 don't display properly yet they are correct when viewed via my laptop. Using a gmail account on my iphone/laptop. On my iphone the sentences break in unusual spots and continue on the next line. Why is this and how can I fix this issue?
Have you tried restarting or resetting your iPhone?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).
Also consider deleting and reinstalling the Mail Account in question.
Maybe you are looking for
-
ITunes has kidnapped my CD/DVD drive!
CD/DVD Problems 1) I had been using itunes version 6.0.5.20 with no problems. 2) I upgraded to itunes version 7.0.0.70 in late September. 3) I recorded some CD's from my library, using the itunes software, with no problems. However: A) The AV buttons
-
IPod can't be removed from computer and unable to shut down windows
Nowadays, my ipod hangs rather frequently, but i thought it's just because it's rather filled up. When i tried to connect my ipod to the computer and opening itunes, nothing works. everything just hangs. i tried to open ipod as a hard disk from my co
-
Unable to convert the multiple PS files to pdf
Hi I have distiller server 8 version we are unable to convert the multiple ps files to pdf. Here is the ps code: /prun { /mysave save def % Performs a save before running the PS file dup = flush % Shows name of PS file being
-
I have tried restarting. Turning off and on my wifi. None has worked. The quality of videos playing on my computer have even gotten worse. My ipad works better than my computer right now. What should I do.
-
Printer rotates every other page
Here's the setup. I have an HP DeskJet 5150 attached to a networked Linux box which I use as my household print server. If I send the printer documents from any other system at my house, everything prints OK, but if I send it from my PowerBook, every