The charts section of the iBookstore is stuck on a specific category

There's normally a button that lets you select categories when looking at the charts section of the iBookstore, but it is missing, leaving me stuck in the last category I was looking at. Anyone else experiencing this? I wonder if it has anything to do with the iBooks 2.0 update.

I have just updated to iBook 2.0 and I get the same problem. I can't choose a different category for books in the chart section any longer. Can anyone see a way to do this?
iTouch 4G iOS 5.0.1

Similar Messages

The Local section of the Yahoo front page is stuck on New York, and I'm unable to change it to my city. IE does not have this problem.

The Local section of the Yahoo front page is stuck on New York as the default, and I'm unable to change it to my city using the normal procedure. IE does not have this problem. This is a new problem that has occurred with the latest version of Firefox. Since the same problem doesn't occur with IE, I've concluded that this is a Firefox issue and not a Yahoo issue. Please advise.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"

HT1918 My husband's iPhone4 uses one apple id for purchases and updates, but another is listed in the App Store. How do I reconfigure his phone to only use the apple I'd and password that is used in the the "featured" section of the App Store?

My husband's iphone4 seems to have 2 apple ids. The one listed in the featured section of the App Store is the correct one. The one that asks to be signed into for purchase and updates is also mine, and the incorrect one. Hence, our devices are linked. How can I remove my apple Id from his phone so that there is no connection between the two?

I think it may be because he got his phone first and not seeing a future issue, I set his phone up to my already existing apple Id used for my iPod. If I connect his iPhone to our pc, can I create his own apple id account?

How to hide the preview section in the crystal report viewer activex cntrl.

Dear All,
I am using the Crystal report viewer ActiveX to display the Crystal report. When the report opens in the Crystal report viewer ActiveX control, a preview section comes at the left hand side of the panel. How can I hide the preview section from the Report viewer control.Is it possible to customize the the report viewer control. Awaiting for your suggestions.
Thank you.
Regards,
Rahaneef

Just to get the terminology correct. I believe you are meaning the Group Tree(?).
Vb Code:
CrystalActiveXReportViewer1.DisplayGroupTree = False.
Also, do consult the developer help file;
C:\Program Files\Business Objects\Crystal Reports 11.5\Help\en\rdcsdk_com_dg_doc\doc\rdcsdk_com_dg.chm
Ludek

HT1386 I just loaded the latest version of itunes and now my Outlook notes won't sync and notes no longer appears in the advanced section of the info page

I just loaded the latest version of itunes and now I cannot sync my notes from Outlook 2010 to my iphone. Notes no longer appears under the advanced section of the info tab. Since I have not had luck syncing in the cloud I always check the boxes and tell the sync to sync from my computer to my phone. Does anyone know how to get this to work.

When you connect your ipod up to the computer. It should show the device, usually with the name of the device, in my case 'jordan's ipod'. This should be on the row which shows 'songs', 'albums' e.t.c on the far right. There when you click on it it should go to a different screen showing a picture of your ipod along with two buttons - Update and Restore. Click update and it should take a 2 mins while your ipod is updated to the latest version of Ios.
After updating te ipod see if there is a change in results.
PS: make sure the device is active while syncing so keep tapping the screen.
Sorry for any incorrect info, i have an ipod touch, but i've had experience with an ipod

Every time I try to load the game section of the iTunes app store it doesn't load, and it appears as a blank page. What do I do?

The game section of the app store won't load on my macbook pro. I've tried redownloading iTunes to see if maybe there was a problem but it didn't work. I don't know what to do.

Hi there,
You may find the troubleshooting steps in the article below helpful.
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
-Griff W.

I want to create an external video widget with iAd. I followed the steps and copied the Url and paste it in the Video pop-up menu in the Properties section of the inspector. When i select 'preview' the video doesn't play and the Url that i pasted is gone.

i want to create an external video widget with iAd to use in an iBook. I followed the steps and copied the Url and paste it in the Video pop-up menu in the Properties section of the inspector. When i select 'preview' the video doesn't play and the Url that i pasted is gone.
hope someone can help!

May have something to do with whether or not the URL can be reached while building your widget. I've got a video on the web. When I enter the URL into the field for the video object and click to another field, the URL is replaced with some text indicating that it is accessing the video then updates itself to displaying just the name of the video file.
It shows just fine in preview and I can see the full path to the video when I export the widget so it should work for you.
Is the video accessible from your Mac while you're laying out your widget?
-Mark

TS1702 Every time i open the purchased section in the app store, it crashes and cannot see any of my previous purchased apps, why?

Every time i open the purchased section in the app store, it crashes and cannot see any of my previous purchased apps, why?

I read online about a "clean reinstall" of firefox which seems to have worked! They should include direction on this on their page: https://support.mozilla.com/en-US/kb/Firefox+crashes+when+you+open+it

Cannot connect to iTunes message appears when trying to access the updates section of the AppStore? How can I fix?

Cannot connect to iTunes message appears when trying to access the updates section of the AppStore? How can I fix?

The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
 Cheers, Tom

How do i set up the viewer window so I can read the email in the bottom section of the window

how do i set up the viewer window so I can read the email in the bottom section of the window? Someone sat at my computer and changed it and now I cannot restore it.

Mail Preferences, Viewing, Use Classic Layout.

I recently reset my iPod touch 4th gen. (holding power and home buttons at the same time.) now it won't let me change my wallpaper, in the photo section or the settings. Any ideas, please? Thanks.

I recently reset my iPod touch 4th gen. (holding power and home buttons at the same time.) now it won't let me change my wallpaper, in the photo section or the settings. Any ideas, please? Thanks.

What happens when you try to change them?
Try:
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.

[EWS][FastTransfer][MS-OXCFXICS] Question about paging in the Fast Transfer Stream after exporting message and the meaning of the config in the previous section of the stream.

Hi, all.
First, I want to construct a fast transfer stream by programming not using the export item's stream and to import the stream to the folder by posting import request in EWS.
So, I export the item by EWS and investigate the exporting stream's struct by reading the [MS-OXCFXICS].pdf. And I can parse each MAPI property, marker, meta-property from the stream.
I find that the stream is made of many pages, most page's length is 0x7BC0, some are less then 0x7BC0. And in the previous section of the stream, there are some configurations. So the questions are:
1. What is the paging rule? or What is the principle of the paging? Whether a complete propvalue/marker(ref from [MS-OXCFXICS].pdf) must be contained in a page except some binary type?
2. Why the page's binary length is 0x7BC0? Or where is the configuation about paging length?
3. The stream is made of the FXOpcodes and the subbuffer about the FXOpcodes, and I find the mean of the FXOpcodes:
internal enum FxOpcodes
None = 0,
Config = 1,
TransferBuffer = 2,
IsInterfaceOk = 3,
TellPartnerVersion = 4,
StartMdbEventsImport = 11,
FinishMdbEventsImport = 12,
AddMdbEvents = 13,
SetWatermarks = 14,
SetReceiveFolder = 15,
SetPerUser = 0x10,
SetProps = 0x11
and in the stream there are 4 part(after I parse the stream):
A. OpCode:Config, value:0000000001000000
B. OpCode:IsInterfaceOk, value:010000000703020000000000C00000000000004600240080
C. OpCode:TellPartnerVersion, value:000F91838417
D and follows is: OpCode:TransferBuffer, Count:31680
So
a. What is the OpCode:Config value meaning?
b. Some parts of The OpCode:IsInterfaceOk' value is the IID_IMessage("00020307-0000-0000-C000-000000000046"), What is other parts meaning?
Thanks in advance for any ideas.

Hi Haiyang,
Your questions are not covered by the Open Specification documentation and this is documented in [MS-OXWSBTRF] — v20141018 section “1.3 Overview”.
The upload and export data stream is an opaque format that only needs to be understood by a server implementation. The client only serves as a repository for the opaque data stream so that it can be uploaded to the server at
a later time.
You made good progress in interpreting the buffer using other documents. Why do you need to be able to parse the data? Please describe your project in details and I might submit a suggestion to document the layout of the data stream,
if your project justifies it. You can send the description directly to me.
Thanks, Vilmos

[EWS][FastTransfer] Question about paging in the Fast Transfer Stream after exporting message and the meaning of the config in the previous section of the stream.

Hi, all.
First, I want to construct a fast transfer stream by programming not using the export item's stream and to import the stream to the folder by posting import request in EWS.
So, I export the item by EWS and investigate the exporting stream's struct by reading the [MS-OXCFXICS].pdf. And I can parse each MAPI property, marker, meta-property from the stream.
I find that the stream is made of many pages, most page's length is 0x7BC0, some are less then 0x7BC0. And in the previous section of the stream, there are some configurations. So the questions are:
1. What is the paging rule? or What is the principle of the paging? Whether a complete propvalue/marker(ref from [MS-OXCFXICS].pdf) must be contained in a page except some binary type?
2. Why the page's binary length is 0x7BC0? Or where is the configuation about paging length?
3. The stream is made of the FXOpcodes and the subbuffer about the FXOpcodes, and I find the mean of the FXOpcodes:
internal enum FxOpcodes
None = 0,
Config = 1,
TransferBuffer = 2,
IsInterfaceOk = 3,
TellPartnerVersion = 4,
StartMdbEventsImport = 11,
FinishMdbEventsImport = 12,
AddMdbEvents = 13,
SetWatermarks = 14,
SetReceiveFolder = 15,
SetPerUser = 0x10,
SetProps = 0x11
and in the stream there are 4 part(after I parse the stream):
A. OpCode:Config, value:0000000001000000
B. OpCode:IsInterfaceOk, value:010000000703020000000000C00000000000004600240080
C. OpCode:TellPartnerVersion, value:000F91838417
D and follows is: OpCode:TransferBuffer, Count:31680
So
a. What is the OpCode:Config value meaning?
b. Some parts of The OpCode:IsInterfaceOk' value is the IID_IMessage("00020307-0000-0000-C000-000000000046"), What is other parts meaning?
Thanks in advance for any ideas.

OK. Thank you.
Today I build a stream with a paging rule as below:
1. Keep each page's byte length is 31680.
2. Make sure a complete property value in a page except binary type property whose value length is larger
than 31680.
And it can work very well when import the stream to the folder by EWS.

I have a "hacker" PC showing up under the "Shared" section of the Finder

Today I noticed a PC computer icon showing up under the "Shared" section of the finder. The computer name was brn_921bc1. I immediately went into System Preferences and turned off file sharing. Is it really that easy for a PC hacker to come into my computer? Please help, as this seems to be a huge security threat.
Thanks!!

polishedstaple wrote:
Today I noticed a PC computer icon showing up under the "Shared" section of the finder. The computer name was brn_921bc1. I immediately went into System Preferences and turned off file sharing. Is it really that easy for a PC hacker to come into my computer? Please help, as this seems to be a huge security threat.
Thanks!!
I doubt this is a hacker but you do seem to have an insecure setup. If you have your computer connected directly to a cable modem then you are essentially on a shared subnet with lots of other people Most of them aren't hackers -- probably none of them are. But this situation does leave you vulnerable which is why many people prefer to place a router in between their cable modem and their computer even if they are only connecting a single mac or pc to the internet.
My first suggestion is that you turn on your Mac's firewall immediately. Open your System Preferences and type "firewall" in the search box. Hit return. When the firewall screen opens select "Allow only essential services". You should do this before you finish reading this thread.
My next suggestion is to buy what's called a NAT router and stick it in between your cable modem and your mac as soon as practical. This will give you a far more secure setup than you can get with a software firewall alone. If you need help setting it up, come back here and I'm sure you can find the advice you need.

The "basic" section of the develop module suddenly disappeared, how do I get it back

I was in the develop module, click to move down to the detail section when the app flashed and the "basic" section was gone. I have no idea what I clicked and am not able to establish the "basic" section. Any ideas?

Right mouse click on any of the right side panel headers. A context menu should appear and you should see Basic listed at top. Click on same to make Basic panel visible again. It would also be worth checking to see if Solo mode is activated in same context menu. If it is then I suggest you deactivate it.

The charts section of the iBookstore is stuck on a specific category

Similar Messages

Maybe you are looking for