The CIMC KVM does not start

Hello Guys
I have problem with the KVM, not launch. This is the error:
The browser is Firefox and the Java is 7
Any idea.
TIA
Cristian

For your information. I have been able solve our problem. Christian, I don't know if you have the same issue, but this is what I did.
First of all. We are running UCS version 2.2(1b). Since updating we get a connection failed on all servers. Re-installing the current Java version or installing a previous version does not solve the problem. Resetting the KVM or CIMC controller didn't work either. Well at least, it seems that is not enough. It apears that all depends on cleaning up Java. This is what I did:
Close UCS Manager and all consoles that require Java.
Make sure you have installed at least Java SE 7 Update 51.
On you computer go to your control panel and open the Java console. Make sure you remove all cached files, and remove all related Applicaton (e.g. KVM Viewer, UCS Manager and etc) manually. Re-installing Java does not do this for you!
Open UCS Manager. Go to Equipment. On each server select "Recover Server". Then select "Reset CIMC (Server Controller).
Wait for two minutes and then you are able to use KVM console.
I hope this information might help some others. Let me know.
Boudewijn

Similar Messages

At work with the text at allocation by the cursor of the big fragment of page it is necessary to shift all time it downwards, "against the stop", but the page automatically does not start to rise upwards as occurs in other browsers. I ask the help!

After transition on Windows 7 there was a problem with Firefox. At work with the text at allocation by the cursor of the big fragment of page it is necessary to shift all time it downwards, "against the stop", but the page automatically does not start to rise upwards as it was earlier and as occurs in other browsers. It is necessary to press other hand a key "downwards" that is the extremely inconvenient. Reinstallation on earlier version (8.0) earlier irreproachably working, has given nothing. I ask the help

You need to enable the Add-ons bar (Firefox > Options or View > Toolbars; Ctrl+/) or the Find bar (Ctrl+F) to make Firefox scroll the page while selecting text.

When you turn on the ipad2 it does not start up properly. The rotating disk that happens when you turn off the ipad appears after the apple logo comes up

When you turn on the ipad2 it does not start up properly. The rotating disk that happens when you turn off the ipad appears after the apple logo comes up during start-up and stays there for ten minutes. Then, the ipad will start up properly.

Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

The Connection Server does not start after an upgrade to BO4.1 SP3

Hello guys,
The Connection Server does not start after an upgrade to BO4.1 SP3
We are in process to upgrade our Business Objects environments to BO4.1 SP3
The first 2 environments , the upgrade went fine. But the third environment de connection server won’t start.
When I always try to start it returns me a failed status and shows me that the server is considered failed because it has stopped 5 time(s) in 60 minute(s).
Our OS is AIX
Uncaught Exception in SilentScope: [CS] Ser
verInitialization::InitManager::Initialize: 0.007^^
The CS initialization failed within the CS server. Aborting
trc file: "connectionserver_BIO.ConnectionServer_ncs.trc", trc level: 1, release: "720"
Gerd

Hi Amine
The File seems ok
File from the failing connection server
-rw-rw---- 1 bioadm bosys 43993 Apr 11 11:29 boconfig.cfg
File from our test system
-rw-rw---- 1 bitadm bosys 43892 Apr 14 10:56 boconfig.cfg
I created a new connectieserver(by the copy function), but the new server won't start.
Regards
Gerd
Log
|89d4a6e0-2a89-7a05-3020-a51d517ab872|2014 04 14 11:54:30:113|+0200|Error| |>>|E| |connectionserver_BIO.ConnectionServer|28246236|3097|| |0|0|0|0|-|-|-|-|-|-||||||||||||[CS] Unhandled exception raised during CS initialization.
init_srv.cpp:95:-: TraceLog message 3
|4dcf04b1-1e1d-df13-48ad-a67f06e29864|2014 04 14 11:54:30:113|+0200|Error| |<<|E|X|connectionserver_BIO.ConnectionServer|28246236|3097|| |0|0|0|0|-|-|-|-|-|-||||||||||||Uncaught Exception in SilentScope: [CS] ServerInitialization::InitManager::Initialize: 0.003
|77ad78f4-37f7-3013-3b50-85cce9fbe7b8|2014 04 14 11:54:30:113|+0200|Error| |>>|E| |connectionserver_BIO.ConnectionServer|28246236|3097|| |0|0|0|0|-|-|-|-|-|-||||||||||||[CS] The CS initialization failed within the CS server. Aborting.

In Logic Pro or Pro X Meta Events don't work correctly; for example inserting Stop Playback number 52 in a specific position the playhead stops wrongly several ticks before. Then the button play does not start.

In Logic, Pro or Pro X Meta Events don't work correctly; for example inserting Stop Playback number 52 in a specific position the playhead stops wrongly several ticks before. Then the button play does not start.

Curious if what your describing is similar to issue 4 which starts around 9:15 in video...
https://youtu.be/q93jdOhi4Oc
If so this started for me, or at least I noticed it for the first time in LPX 10.1.1. What version of logic are you running?
I've recently found that this issue also affects note timing on instrument tracks that use the "External Instrument" plugin.

HT1414 My ipad only showes the apple it does not start up

When I turn on my ipad all i get is the apple, it does not turn on completely.

Did you try rebooting the iPad?
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

I have a mac book pro. It is 3 years old. when I push the button to turn on the computer, it does not start. The little light comes on, but the computer does not start up

I have a macbook pro. It is three years old. It has been working perfectly fine. However, as of yesterday, whenever I push the "on" button, the computer does not turn on. The little light comes on indicating that the computer has started, but there is nothing on the computer screen, and it does not make the usually noise that it makes when it cycles on.
Any suggestions?

Check the battery status to make sure it has a full charge (and that the charger is working). Then make sure the screen backlight is turned up.
If the backlight is up then, try forcing the machine to shutdown (hold the power button for 5 - 10 seconds). Then restart the computer(listen for the start up chime).
If the computer does start up and you still cannot see anything reset the PRAM by forcing the machine to shut down (hold power button as before), then press the power button and start holding the key combo
<Command>+<Option>+p+r
until you hear the start up chime two or three times, then release the keys and allow to boot

The weblogic server does not start because a required provider is wrong

Hi,
I configured a new required security provider (sqlAuthentication) in weblogic but the provider is not working because the name of jdbc is wrong, now I cannot start weblogic and of course I cannot access to the console to change the mistake.
The question is:
How can I revert the changes or reconfigurate a file to fix the problem and start weblogic?
Any idea?
Jhon
weblogic 10.3.5

Solved.
I replaced the config.xml with the automatic backup and It works.
Jhon

After install i got the error firefox does not start, safe mode does it work

Rapport-ID
bp-7e0bbdc9-3b5b-44db-8831-d8a352130608
bp-3447b290-e4e1-4690-bbf7-14ae72130608
bp-2894daaf-c601-4dbd-9031-001fe2130608
This is the error after installing firefox on the pc. Safe mode is well working. i also send the crash report.
Please give me a tutorial to fix this.

hello, please start firefox in safemode (by pressing the shift-key while it is launching) & go to ''firefox > options > advanced > general'' & disable hardware acceleration.

TS1292 my card is not letting me redeem my $15 credit from my itunes card and the serial number does not start with GCA

the system keeps saying that my itunes card is invalid and the serial number starts with GCA I NEED HELP I dont have $15 to waste

Make sure you're using the correct code. For most iTunes cards, the code is under the scratchoff area on the back of the card. Also, the gift card you're trying to use must have been issued in the country whose iTunes Store you are using; you cannot use a card from another country. If you're sure you're using the correct code and that the card was indeed issued in your country, contact the iTunes Store Support; instructions are at the bottom of the article from which you came.
Regards.

After extraction of the file, firefox does not start on my computer.

the file says it is extracting and then nothing happens. when i manually try to click open the file, it just tries to extract the program again.

Try to disable your anti-virus software temporarily as it may be blocking the Firefox installer.

The CSSD does not start automatically on Non-RAC - AIX 5L

Hi all,
Database: Oracle 10.2.0.4
O.S AIX 5.3 TL 10
I am facing a problem with the CSSD Non-RAC/Clusterware.
When we restarted the server the service CSSD does not start automatically and there is no relevant messages in the log files of CSSD.
Running the "localconfig reset $ORACLE_HOME", execute successfully but does not start the CSSD.
Running "/etc/init.cssd start" - does not work, nothing happens when we run it
I manually ran "/etc/ init.cssd run" and the service CSSD (ossd.bin) was started without errors.
No errors on errpt from AIX.
I've opened a SR but I am waiting for response from Oracle.

Hi,
I believe this problem is not with Oracle, but in AIX.It may be that one process that is starting on boot is holding the other process. You need to identify what is process/application.
Check the process on inittab that are already active and which are inactive they should be active.
One clue: Is very common process that is initiated in wait mode hold the boot server.
wait
When the init command enters the run level that matches the entry's run level,
start the process and wait for its termination.
All subsequent reads of the /etc/inittab file while the init
command is in the same run level will cause the init command to ignore this entry.http://publib.boulder.ibm.com/infocenter/aix/v6r1/index.jsp?topic=/com.ibm.aix.files/doc/aixfiles/inittab.htm
Regards,
Levi Pereira

WebAnalysis does not start after workspace is set on Windows Authentication

I've used [doc Hyperion System 9.3.x Configuring the BI+ Workspace for Single Sign-On (SSO) with Internet Information Services (IIS) [ID 1100096.1] to configure SSO for workspace users. It works fine. Though since then the WA service does not start anymore. The error message which is raised sounds very very familar but still I am not able to tackle it. The message in the log or the analysis console is "[WARN] [STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)' com.hyperion.analyzer.utils.general.HYAUtil - Wait for workspace [
[WARN] Timer-2 com.hyperion.analyzer.utils.general.HYAUtil - ."
I am very sure it had something to do with rights/ permissions, but also after playing around with IIS and ntfs permissions for hours I can't get SSO en WA both working at the same time.
As soon as I set my workspace aplication in IIS on windows integrated, the SSO is working but as soon as a I restart the WA service it fails to start. When I set the workspace application IIS on anonymous the WA service start fine but then the SSO is not working anymore.
It drives me crazy.
Hopefully its a small matter for you to solve!
Thanks in advance.

Dont know exactly whats happened but I presume something went wrong during the update procedure.
If you will be not able to start the notebook in the safe mode or to boot the notebook then user the Toshiba recovery CD to gets the notebook working!

Zune Software does not start on WIN 8.1 PRO

whenever I need to run ZUNE software to update my phone or just edit my music collection my Zune software does not start. I only get a window alert saying [Windows cannot find 'C:\Program Files\Zune\Zune.exe'. Make sure you typed the name correctly,
and then try again.]
Troubleshoot performed:
-uninstall software, reinstalled with administrative privileges, run the program and does not start, end up with same message. (many, many times)
- Installed it in different directory, installed all windows updates, run program and same symptom
- installed the MUSIC app from windows Store, helps but does not let me edit mysong collections app really is not the appropiate one
-cannot download my photos or videos, please HELP!
*** Is there a way I can download my pics and videos without ZUNE? Is there a FIX IT program for Windows 8 PRO, just in case there might be a problem with registry entries? ***
Machine DELL XPS
Windows 8.1 PRo
Intel Core i7 - 16 GB RAM 64 bit Operating System, x64 based processor

Whaaaaaat...???????
It is not compatible? How do i transfer my music, pictures, videos.??? Cant beleive it..!!
HELP HELP

Panel does not start automatically in Gnome 2.24.3

Since Gnome 2.24.3, the Gnome Panel does not start automatically.
I had to manualy add it to the startup group via "Sessions" in order to force it to start when login finishes.
Does anybody has the same behavior?
Should I report it as a bug?

That may be true but it is a real pain since when it happens the only way to recover is to terminate all of the iTunes modules with task manager and start it manually. It also leaves the IPOD in a state that says do not disconnect. You can disconnect since nothing is really happening but there is no excuse for this not to start much faster. When you have multiple users it is a real pain. It ought to be able to either end when finished or better yet allow multiple users simultaneously updating from different libraries.
I guess i will just have to get in the habit of treating it as a single user and start and stop it every time I need it and be suer not to let it run. Not nice because that means waiting for larger Podcast downloads instead of having there ready for me when I sign on my computer.

The CIMC KVM does not start

Similar Messages

Maybe you are looking for