The 'Click' camera sound when taking a picture

is there any way to turn the sound off so that you can take a picture without the annoying 'camera' shutter sound?
Thanks!

.... thanks, I'm feeling a little sheepish right about now...
Doh!

Similar Messages

  • Turn of click sound when taking a picture

    I have a BB Tour 9630.  Is it possible to disable the clicking shutter sound the camera makes when you take a pic?

    There is nothing natively on the device that will do that.
    There are a couple of 3rd party apps that do, though.  One is called BerryAnnoying and *I think* QuickLaunch will do it but don't quote me on that one. 
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • Shutter sound that camera makes when taking a picture sound like it's dying.

    The shutter sound that my iphone 5s makes when I take a picture sounds like it's dying. Anyone else have this happen on their phone? This hasn't caused a problem with taking pictures but it sounds weird.

    Unfortunately, your naivete about complex electronic devices has misled you into a common misconception that Problem A = Cause B = Painless, no-effort, Solution C.  It's all magic to you.
    Virtually any problem can have a multitude of causes, if for no other reason that you have incompletely described the total state of the phone.  More broadly, your camera problem is being caused either by corrupted code and or settings, of unknown origin, or a hardware issue.  There is no way anyone determine psychicly.  The only way to find out is the standard troubleshooting steps developted by Apple, and described In the User Guide.
    it's taking more than half a day to put a big bandage on the wound and hope it fixes it.
    Nonsense.  1-2 hours tops for 2 restores.
    This has been a problem with the phone since the day I bought it.  It can occur everyimte I use the camera app for a week then not happen as much for a couple months.  In the past year, I have restarted, reset restored, etc several times and I still have this problem
    You oddly failed to mention any of that in your initial post, and instead endowed us with whining about your frustration level...  You didn't mention doing ANY of the troubleshooting steps you now describe.  Yet another example of entitlement trumping logic.
    The bottom line:  Restore the phone as new (without restoring the backup), if you haven't done so already.  If that doesn't work, you need warranty replacement of the phone.

  • Red Camera Light when taking Video

    Dear All,
                I know this has been discussed many times but I just want to check whether is there any way or nokia have any intention to solve this issue of having the red indicator light when taking video/picture.
                 I do understand is for privacy issue and have no regards in shutting off simulated camera shutter tone when taking video and picture.
                 However problems comes in when we try to take video/picture through windows and we see the red reflection light instead, and we are not able to capture our young children without them staring at the red light.
    Do advice, im using a nokia 6710 navigator by the way
    Regards

    well, i got a 6120 classic- video camera is not the best in the world. what i have found- in during the day and just for more colorful photos it is better switch a Sunny mode. but every thing goes wrong with the video.
    and during the night it is better not to shooy at all. 
    some people told me, that the panel of a phone and the  transperent part of a camera is not of the best quality.
    i even tried several programms for photo's quality development- no use. 
    the example of on my honda's board in the night- i guess the topic starter is talking about this effect.  http://xcuber.com/photo/kiilo89/1/1 - this is an xcuber account- there are 4 photos in that album. except one all photos shooted at night with the light source. 
    can it be fixed somehow?

  • CK71 suddenly hang when taking a picture using the camera

    Hi team, The customer is using the CK71 with camera option.
    OS is. 1.61.22.72.
    Our partner developed the camera application based on Intermec source file according to the IDL(Multimedia Resource Kit).
    Regarding the source that the partner tested, I attached the zip file including the DotNetCF 3.5.
    Also, I attached the CNxDShow.CAB that we have to install first for operating the camera. The symptom is... when taking the picture again and again in light environment and in dark environment by turns, suddenly CN70 hang. For restoring, we should remove the battery and install it again for rebooting.
    But, the customer hates the removing and reinstalling the battery. To reproduce the symptom....
    1. Copy all file under the folder "\FullSreenCameraCNx\FullSreenCameraCNx\bin\Debug" and paste them into the device.
    2. Copy the CNxDShow.CAB and paste into the device.
    3. Install the CNxDShow.CAB first
    4. Create new folder "\My Documents\My Pictures" on the device, if the device doesn't have the name of the folder
    5. Execute the FullScreenCameraCNx.exe on the device by clicking
    6. Try taking a picture by pushing the enter key in light/dark environment by turns again and againIn our trouble shooting,
    The application put the log file when taking a picture.
    the location of the log is under the folder "Flash File Store\Log\Device_Conncet".
    Normal log is...
    ===================================
    2015-06-30 5:2:31 Camera Shot S
    2015-06-30 5:2:31 Camera Shot E
    2015-06-30 5:2:33 Start
    2015-06-30 5:2:33 Shot Result : Ok : \My Documents\My Pictures\SnapShot-5.jpg
    ===================================or
    ===================================
    2015-06-30 4:58:0 Camera Shot S
    2015-06-30 4:58:0 Camera Shot E
    2015-06-30 4:58:1 Start
    2015-06-30 4:58:1 Snapshot failed
    ===================================But, Abnormal log when Device hang suddenly is ...
    No "Start" or No "Snapshot failed" like the below.
    ===================================
    2015-06-30 5:5:34 Camera Shot S
    2015-06-30 5:5:34 Camera Shot E
    2015-06-30 5:5:34 Camera Shot S
    2015-06-30 5:5:34 Camera Shot E
    2015-06-30 5:5:34 Camera Shot S
    2015-06-30 5:5:34 Camera Shot E
    2015-06-30 5:5:35 Camera Shot S
    2015-06-30 5:5:35 Camera Shot E
    ===================================Please see the logfile in the 20150630.txt that I attached additionally.
    The thing that we are feeling that it was strange is....
    in the source, if invoked "Cam.Snapshot(CurrentResolution)", "Cam_SnapshotEvent" should be called. But, when we experienced the "Device Hang" during taking the pictures, I guess that "Cam_SnapshotEvent" were not called. I copied and pasted the some part of source that I want to highlight like the below.
    ============================================================//---------------------------------------------------
    // make snapshot
    bool AcceptingEnter = true; //for eliminating repeating enter keydown events...
    void Form1_KeyDown(object sender, KeyEventArgs e)
    if (e.KeyData == Keys.Enter && AcceptingEnter == true)
    AcceptingEnter = false;
    log_Entity.write_Log(1, " Camera Shot S");
    Cam.Snapshot(CurrentResolution);
    log_Entity.write_Log(1, " Camera Shot E");
    e.Handled = true;
    // Received snapshot event
    void Cam_SnapshotEvent(object sender, Camera.SnapshotArgs sna)
    log_Entity.write_Log(1, " Start");
    if (sna.Status != Camera.SnapshotStatus.Ok)
    log_Entity.write_Log(1, " Snapshot failed");
    MessageBox.Show("Snapshot failed");
    else
    log_Entity.write_Log(1, " Shot Result : " + sna.Status + " : " + sna.Filename);
    ============================================================ Can anyone provide the information or solution why the CK71 suddenly hang and how to avoid the "device hang"? Best Regards,
    Kim, Hyun Wook  

    Hello
    you opened a case at our support portal. That is the right way to get support for such very specific issues.
    Thanks
    Josef

  • Silence shutter sound when taking picture?

    Hello all,
    I was curious to know if there was a way to silence the shutter sound effect when taking a picture during an ichat session. That is, so that neither I, nor the person on the opposite side, can hear it. Also, if there is a way to turn off this sound effect when taking full screenshots, please let me know. I use this feature a lot when designing presentations, and hearing this noise over my music is driving me absolutely insane.
    Thanks!!

    Hi,
    Not simply is the short answer.
    Possibles.
    Go to System Preferences > Sound > Sound Effects
    Turn the volume down for Alerts (iChat sounds are played as if they were System Alerts).
    iTunes has it's own volume where you can adjust it to be louder of softer compared to the Master Volume setting (and therefore louder than the Alerts)
    Deeper method for iChat.
    Right/Control Click the app in Applications.
    USe the Show Contents item
    Open Contents
    Open Resources.
    Change name of Shutter sound.
    It will now not play in iChat.
    Using the Keyboard to take Screen shots invokes a sound I have not looked for (it is not associated with the Grab App in Applications/Utilities than can turn the sound Off)
    9:37 PM Thursday; May 13, 2010
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

  • How do I turn the camera off after taking a picture?

    How do I turn the camera off after taking a picture?

    Exit the camera App by tapping the Home button.

  • When taking a picture with home button and sleep button can you get rid of the tool and task bar??

    When taking a picture with home and sleep button can you get rid of the tool and task bar?? (the search bars)

    No, but you can use any picture editing tool to crop out the bars.  (Many are free in the App Store.)  Me personally, I use PhotoPad, which I use to crop as well as rotate the screen shot.  Takes less than a minute to do both with PhotoPad.

  • Camera closes after taking a picture & pic not saved

    Hi there,
    My iPhone has worked fine but now when taking a picture the camera closes and the phone doesn't appeared to have saved the photo at all. Nothing in the Camera Roll album!
    I have tried shutting the phone off and powering up again but still experiencing the same issue.
    Phone has the latest 1.1.4 firmware
    Anyone else had this problem?

    Yes I'm having the same problems. Taking pictures, then only seeing faint squares on the camera roll, with not pictures. When trying to raise photo, camera goes back to setting. This is my 4th Iphone, first one I purchased, took 100 pictures and downloaded them on a Dell Laptop, then faint squares on Camera roll showed up, taking it back to an Apple store in Louisville, Ky, getting a new phone, doing the same thing to a second party, another 100 photos, downloaded them, and again no pics, just empty squares, then I sent it to Apple, got a loaner service phone, and loaner phone wouldn't take pictures either, got a brand new phone from Apple service, invoice saying "replaced with new unit", and it again would not take pictures. 4 phones, and two service phones, and the last one a brand new phone from Apple service direct to my ole Indiana home, and still it doens't take and then store pictures, does just what the other phones have done, nothing different, still doesn't work, still doesn't take pictures, still not I wanted, and I'm going to keep trying. Let me hear from any one who has the same problem, or anyone who might have an answer, Joe

  • I have a white haze over photos when taking a picture with my flash

    I have a white haze over photos when taking a picture with my flash.  What can I do to fix it?

    After the ios7 update, my wife's phone began having these same issues and we assumed it was a flaw with the update.
    But  after some trial and error, we concluded it was the illumination of the  white plastic backing of the iPhone 4.  We tried a different protective  case, we blackened the apeture of the black case with a black sharpie,  none of those things worked.
    It  was noted that the white and blurry photos only occurred with a case  installed.  Without a case, the photos were perfect.  It is a *** issue.
    Since  we were using a case and appearance was not that big of an issue, I  decided to apply a strip of black electrical tape with holes punched out  for the camera and flash mechanisms and reapplied the protective case.   This tacky fix solved 95% of the white blurry look to the flash photos.
    So  a work-around is to apply a non-transparent piece of tape, or sticker  with appropiate sized holes for the camera lens and flash LED on the  back of the white plastic phone case.  It's tacky, it's a poor design  from apple, but it works.

  • Zooming when taking a picture

    I have a Blu Win HD Win Phone and when taking a picture and i'm trying to zoom in I stretch out using my thumb and forefinger but it doesn't do anything. How do I zoom in?

    For help using Windows Phone please post in the Windows Phone forums on http://answers.microsoft.com 

  • Can I turn on shutter sound when taking a photo with iPad air 2

    Can I turn on the shutter sound when taking a photo?

    THere should be a button on the side by the volume buttons... Slide it down so it has a little red piece showing and it should silent the shutter button

  • Can the resolution be changed when taking a photo.  When I take a photo it is always 1MEG or more.  Like to reduce this so that the photos are easily e-mailed.  Any help?

    Can the resolution be changed when taking a photo.  When I take a photo it is always 1MEG or more.  Like to reduce this so that the photos are easily e-mailed.  Any help?

    When you email a picture from Photos, you can choose the size.
    http://i1224.photobucket.com/albums/ee374/Diavonex/3bec08e4423ac97de93d4560186b6 daf.jpg

  • How to turn off sound when taking a video

    How to turn off sound when taking a video

    debrafromusa,
    This would be an extremely bad idea, the start up tone is there for a reason. It tells you when your system is attempting to  boot, it is also necessary in the even resets like a PRAM reset are done. There is software to mask the sound however as stated it is a very poor idea.
    Also, why turn it off. Why not simply put the display to sleep when the machine is not in use. You can easily do that in System Preferences - Energy Saver

  • Why do I get the 'critical stop' sound when I leave the firefox browser - doesn't happen with explorer?

    Why do I get the 'critical stop' sound when I leave the firefox browser. This doesn't happen when using internet explorer?

    Do you mean that there is a problem with closing Firefox?
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    Try to use "Firefox > Exit" (Windows: Firefox/File > Exit; Mac: Firefox > Quit Firefox; Linux: Firefox/File > Quit) to close Firefox if you are currently doing that by clicking the close X on the Firefox title bar.

Maybe you are looking for