The Cluster Node Selection screen doesn't appear installing  RAC 9i

The Cluster Node Selection screen doesn't appear installing RAC 9i with OCFS on Windows 2003
We are using patch #2878462 OUI 2.2.0.18.0
The Oracle Cluster check was successful !

more info ...
We are following the doc. id. #178882.1 "Step-By-Step Installationg of RAC with OCFS on Windows 2000" instructions.

Similar Messages

  • Nodes unavailable for selection from the OUI Node Selection screen

    After successfully installing the grid infrastructure, The second node is not available fr selection while installing the database software.I am installing Release 11.2.0.1 on OEL 5.8 running on Esxi. These are two nodes And am using /etc/hosts file for IP resolution. cluster services are online on both nodes. I have even restarted them as per the docs but still can't see the node.

    I have two users, grid and oracle. These are the environments
    Oracle:
    Node1:
    [oracle@OELRacNode1 ~]$ env|grep ORA
    ORACLE_BASE=/u01/app/oracle
    [oracle@OELRacNode1 ~]$
    Node2:
    [oracle@OELRacNode2 ~]$ env|grep ORA
    ORACLE_BASE=/u01/app/oracle
    [oracle@OELRacNode2 ~]$
    This means I haven't set $ORACLE_HOME for the user oracle on both nodes before running the runInstaller for the database software.
    User grid:
    Node1:
    [grid@OELRacNode1 ~]$ env|grep ORA
    ORACLE_BASE=/u01/app/11.2.0/grid
    [grid@OELRacNode1 ~]$
    Node2:
    [grid@OELRacNode2 ~]$ env|grep ORA
    ORACLE_BASE=/u01/app/11.2.0/grid
    [grid@OELRacNode2 ~]$
    Password-less ssh has been set for the user grid:
    [grid@OELRacNode2 ~]$ ssh grid@OELRacNode1
    Last login: Mon Aug  5 12:41:29 2013 from 192.168.1.74
    [grid@OELRacNode1 ~]$
    [grid@OELRacNode1 ~]$ ssh grid@OELRacNode2
    Last login: Mon Aug  5 12:42:39 2013 from 192.168.1.74
    [grid@OELRacNode2 ~]$
    From primary (Node1):
    [grid@OELRacNode1 bin]$ ./crsctl check cluster -all
    oelracnode1:
    CRS-4537: Cluster Ready Services is online
    CRS-4529: Cluster Synchronization Services is online
    CRS-4533: Event Manager is online
    oelracnode2:
    CRS-4537: Cluster Ready Services is online
    CRS-4529: Cluster Synchronization Services is online
    CRS-4533: Event Manager is online
    [grid@OELRacNode1 bin]$ ./olsnodes
    oelracnode1
    [grid@OELRacNode1 bin]$
    [grid@OELRacNode1 bin]$
    From secondary (Node2):
    [grid@OELRacNode2 11.2.0]$ cd grid/bin/
    [grid@OELRacNode2 bin]$ ./crsctl check cluster -all
    oelracnode1:
    CRS-4537: Cluster Ready Services is online
    CRS-4529: Cluster Synchronization Services is online
    CRS-4533: Event Manager is online
    oelracnode2:
    CRS-4537: Cluster Ready Services is online
    CRS-4529: Cluster Synchronization Services is online
    CRS-4533: Event Manager is online
    [grid@OELRacNode2 bin]$
    [grid@OELRacNode2 bin]$ ./olsnodes
    oelracnode2
    [grid@OELRacNode2 bin]$
    I installed the grid infrastructure as grid
    I am installing rdbms as oracle.

  • Why the non-cluster SQL Server appeared in the cluster nodes list

    1, I install the node rs6 standalone, Why it appeared in the cluster node list by inquiry the dmv?
    2, how to removed the rs6 from the cluster node list ?
    by "set -clusterownernode -resource "XXXASQL" -owners NODE1,NODE2"?
    But how to find the resource  name? I tried to use window cluster name, SQL cluster name, and SQL role name , All of them say failed to get the cluster object.
     3,how to set the owers to {}, I try below, but failed.

    IMHO, sys.dm_os_cluster_nodes  DMV is associated with the SQL Server
    Operating System (SQLOS), sys.dm_os_cluster_nodes returns one row for each node in the failover cluster configuration.
    As you are running standalone instance on cluster I am assuming this information is being picked from
    OS and not from RS6 SQL instance.
    As you have confirmed Is_cluster is false and if you don’t see RS6 instance in failover cluster manager I don’t think anything damaged here. Everything looking as expected, dont change owner node as its standalone instance.

  • Why is the Boot Disc Selection screen always appearing?

    WIth a bootcamp partition on an iMac booting while holding down the Option key will cause the boot disk selection screen to appear, but suddenly I'm getting the boot disk selection screen even WITHOUT holding down the Option key. Why?

    Well it might take a little longer since POST (power-on self test) needs to check more memory.
    But try doing a smc and pram reset and see if that helps.

  • I am dual booting my mackbook pro with windows 7 64 bit. Yesterday it started locking up at the disk drive selections screen, when you hold down the "option" butting when powering on. I have been searching all morning, and so far nothing. Thanks. :)

    Hey folks,
    I have been using bootcamp for months now with windows 7 64 bit, and its been fine, yesterday while I was rebooting to do some gaming, at the hard drive selection screen when you boot holding the "options" butting down, it locks up when I select the windows drive and just sits there for ever. It doesn't throw an error, it boots fine into Lion.
    I searched all morning and didn't find anything, was hoping that someone might have an idea.
    Thanks in advance

    Search again. Microsoft has tips on what to do and Windows has a number of features
    system restore points
    automatic system repair using the Win7 DVD
    system restore image creation
    Just like you would with OS X Lion and Lion Recovery and Repair
    Use WinClone 3 www.twocanoes.com $20 to make an image just like you would with Disk Utility Restore or Carbon Copy Cloner
    rollback to last known good boot check point
    rollback a driver or program or any changes
    clean out temp files
    clean registry
    chkdsk
    https://discussions.apple.com/people/The%20hatter?view=bookmarks

  • ALV Report -   Selection screen information should appear in Output screen

    Hi experts,
    I am working on ALV Reports.
    I want selection screen information to appear in ouputscreen when report executed.
    Those who know the sloution pls tell  me as soon as possible.
    regards,
    Imran

    Hi Imrangs ,
    Ur requirement is not clear -
    if u want ur selection screen and the output screen on the same screen, i.e if u fill ur selection options with input and press the button then ur ALV will display on the same screen. For this try to use Screen painter, it will get resolved.
    http://www.kodyaz.com/articles/sap-abap-tutorial-alv-grid-cl_gui_alv_grid-screen-painter.aspx
    chreers
    Regards
    Neha

  • Bex selection screen does not appear when running workbook via RRMX.

    Hi Experts,
    I have following problem: When I run a BEx workbook from a user menu (trans. RRMX), I get no selection screen, but just the workbook with text: "no data found". When I press the refresh button (variable change button), the selection screen appears and after that the data are visible in the workbook. When I run the underlying query the selection screen appears normally. With some other workbooks with selections I do not have such a problem.
    Anybody can give me a hint how to get the selection screen diplayed? We are on BI 7.1, Bex SP 10, patch 1.
    Thank you,
    Michal

    Dear Michal,
    Your Question:
    Anybody can give me a hint how to get the selection screen diplayed? We are on BI 7.1, Bex SP 10, patch 1.
    Answer:
    Open the workbook and goto workbook setting from the analyzer design toolbar.
    Check the Refresh workbook on check box.
    So every time the selection screen will be appear after exectuion of the workbook.
    Thanks & Regards,
    Praveen.K

  • In the Safari browser on Facebook doesn't appears the symbol of the video call. What can I do?

    In the Safari browser on Facebook doesn't appears the symbol of the video call. What can I do? I'm Italian.
    Nel browser di Safari su Facebook non mi appare il simbolo per videochiamare. Cosa posso fare? Sono Italiano.

    If you are using the Creative cloud app to do the install in the upper right hand corner there is a Gear looking icon. Click on that and select preferences then go to the Apps tab and you can select which drive any and all Adobe software installs to. I suggest you included the folder also. Mine look like this.
    D:\Programs Files\Adobe
    All the creative Cloud Apps then get installed to the D drive in the Program Files folder in a Sub-folder called Adobe. They are then installed to another Sub-folder for whichever program they are, IE Photoshop, Bridge, Lightroom and so on.
    If you are installing the Stand Alone versions then at one point during the initial install system you are given a choice to do a Custom or Advanced install and you have to choose that option then you can select which drive and folders to install to.

  • Query Selection Screen does not appear in Web Analyzer

    Hi Experts,
    Query Selection Screen appears when we open the query in Bex Analayzer in production system. But when we open the query in ABAP or JAVA Web view, the selection screen does not appears.
    As the volume of data in the cube is very high, and since the selection screen is not appearing, the query extracts 1.5Mrecords and results in dump.
    Kindly let me know the possibility for selection screen not appearing.
    Note: The selection screen appear in Development system in Bex Analyzer, ABAP View and Java View
    Regards
    Suresh Kumar

    Dear Suresh,
    You can check if the parameter &VARIABLE_SCREEN=X is added to standard template or not, If not add this,
    In order to add this parameter in the webtemplate you have to change 0ANALYSIS_PATTERN and save it as ZANALYSIS_PATTERN and enter this standard web template under TCODE RSCUSTV27.
    Also I would like to explain you the behavior of Web Analyzer,
    Parameter VARIABLE_SCREEN=X only influences the WEB application at startup. This will not come into affect
    when you use the 'New Analysis' button. The 'New Analysis' button resets the dataprovider so this would not
    affect the variable screen and would not redisplay the variable screen as you require.
    Regards,
    Arvind

  • HOW TO PASS THE DATA FROM SELECTION SCREEN TO STANDARD TRANSACTION?

    HI,
    HOW TO PASS THE DATA FROM SELECTION SCREEN TO STANDARD TRANSACTION?
    thanks,
    samba.

    By selection screen, what do you mean?   There is no selection screen in WDA as there was in classic dynpro. Do you mean you are using the Select-Options reusable component?  Are you wanting to call a standard transaction via ITS - SAPGUI for HTML?  Please provide more details to your question.

  • CUA: One or more errors occurred while checking the status of Windows Firewall on the cluster nodes

    Cluster with 2 hosts 2012 R2
    Scheduled CAU fails with:
    CAU run {4EFE116C-AB49-456D-8EED-F7EDC764DA49} on cluster Cluster1 failed. Error Message:One or more errors occurred while checking the status of Windows Firewall on the cluster nodes. Review the errors for more information on how to resolve the problems.
    Error Code:-2146233088 Stack:   at MS.Internal.ClusterAwareUpdating.Util.<CheckFirewallsAsync>d__3a.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at Microsoft.ClusterAwareUpdating.Commands.InvokeCauRunCommand.<_ProcessCluster>d__78.MoveNext()
    If I run CAU "Analyze Readiness" ALL comes as PASS
    If I run CUA by hand on same hosts with NO change to the system (not even reboot) it finishes OK
    Anybody any ideas?
    Thanks
    Seb

    Hi,
    In some case if you disabled the connection in Windows firewall inbound of
     "Cluster aware updating" service it will can’t use the CAU.
    More information:
    Starting with Cluster-Aware Updating: Self-Updating
    http://blogs.technet.com/b/filecab/archive/2012/05/17/starting-with-cluster-aware-updating-self-updating.aspx
    What is Cluster Aware Updating in Windows Server 2012? (Part 1)
    http://blogs.technet.com/b/mspfe/archive/2013/02/06/what-is-cluster-aware-updating-in-windows-server-2012.aspx
    Cluster-Aware Updating Overview
    http://technet.microsoft.com/en-us/library/hh831694.aspx
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • How do I find the airplay button, it's doesn't appear on my iPhone 4S?

    How do I find the airplay button, it's doesn't appear on my iPhone 4S?

    This is how it works on my iPodtouch:
    http://www.youtube.com/watch?v=u5RfCh6jpBM

  • KDMAT need to be included in the current VA01 selection screen or list when

    Hello SAP SD Consultants,
    Please help me with below requirement or what user exit should we use to implement below requirement.  I have discussed with with ABAP and gave some User exits that has related description, however, ABAP confirmed that none of below UE suits the requirement.
    1. AD010002 - Delimit selection and/or filter data that is determined
    2. CLCLRS01 - Additional Fields on the Result Screen
    3. CLCLRS02 - Fill the Additional Fields on the Result Screen
    4. V60P0001 - Data provision for additional fields for display in lists
    5. WVLB0001 - Display additional data in subscreen for simulation list
    Thus, kindly help us on how we can proceed with this.
    000----
    Requirement:
    The field  u201CCustomer-material numberu201D or field name KDMAT need to be included in the current VA01 selection screen or list when creating sales orders with reference from a contract.
    Currently, customer have its own description or material code to classify or define the product they want to order  which are sometimes not exactly the same as the material number maintained in the system or the product / material code used by the Company for sales. These material descriptions were manually entered in the system thru the use of customer-material number field or KDMAT. When sales orders or contracts are created for certain or specific customers, the user or the person who creates that contract / order manually inputs the description in the customer-material number field.
    The said entry should also be seen in the Selection List for Reference Document. The transaction to be modified is VA01 under program screen SAPMV45A specific to screen number 4413.
    Test Data used:
    Reference Transaction: VA41 (create contract), VA43 (display contract)
    Order Type: ZCQ (example)
    Contract No. 40000040
    Transaction: VA01
    Order type: ZOR (example)
    Contract No. 40000040
    a. Go to tcode VA01, input the order type ZOR, click the button CREATE with REFERENCE.
    b. Input the reference contract document, since our reference doc is a contract, go to tab CONTRACT and input the contract no..
    Expected output:
    Upon inputing the contract no. in the contract tab, click u201CSelection Listu201D.
    The customer-material number or KDMAT should be included as one of the field and should be displayed in the Selection List for Reference Document window.
    Edited by: ria sumagaysay on Mar 26, 2010 11:30 AM

    Hello,
    Thank you for the responce.
    The reason why they want to reflect KDMAT in the selection list is that, during order creation, not all materials or KDMAT will be ordered by that customer, only specific materials. However, during order processing, the customer only gives the details of the KDMAT. Thus, if there are around hundreds of items inside that contract, the sales personnel who creates the order needs to exclude those material not included in the customer order list manually via checking table VBAP and compare the material code from the selection list.
    This is very tedious on their part and commonly caused human error, however, when the KDMAT field is available, although the process has manual intervention, it will serve them well and lessen the burden.

  • HT1386 I installed Snow Leopard and have the latest version of iTunes. However, when I connect my iPhone, it charges and iPhoto opens, but iTunes doesn't seem to recognize the iPhone. It simply doesn't appear in the left column. What gives?

    I installed Snow Leopard and have the latest version of iTunes. However, when I connect my iPhone 4S, it charges and iPhoto opens, but iTunes doesn't seem to recognize the iPhone. It simply doesn't appear in the left column. What gives?

    http://support.apple.com/kb/TS1591

  • The VAT ID we have doesn't appear to work

    Hello,
    I can't enter my VAT number in my Dev Center account.
    I keep getting the message 'The VAT ID we have doesn’t appear to work. To update it, go here. Learn more.'.
    It's also impossible for me to create a new support ticket.
    Dave Claessens

    Hello Dave,
    If you double checked your VAT ID to make sure that it is valid then please contact
    Dev Center Support for assistance with this. 
    -Miles
    Windows and Windows Phone Dev Center Support
    Send us your feedback about the Windows Platform

Maybe you are looking for