The cluster resource could not be found-SAP ECC on Windows Server 2008 MSCS

Hi,
I'm installing SAP ECC 6.0 on Windows server 2008 MSCS Cluster. As mentioned in the guide, i've created a service and added a resource.
I was able to successfully configure the DB installation and cluster configuration. But when I start the ASCS installation, the installation fails when it tries to create system folders with the following error.
Error when sharing file system export (share) saploc : The cluster resource could not be found
I'm using a user with domain admin access and also a member of the local administrators group. I've even tried to install using the domain administrator user but still the problem exists.
Can anyone please let me know where am I going wrong ?
NB: The host on which I'm installing is not a domain controller but it is a member of a domain.
Regards,
Varadharajan M

Yes Krishna,
I've not created any shared folders manually and I've used the "Use domain of current user" option.
Actually SAPINST has created the usr and sap folder in the SAP drive (say E: drive) which is a clustered disk. The name of that clustered sidk is "Clustered Disk 1". I could able to open up the shared directories available in that SAP virtual host by issuing
<SAPGRP>. I don't know where am I going wrong:( I've also opened a call with a SAP and waiting for their reply.
Regards,
Varadharajan M

Similar Messages

The cluster resource could not be brought online by the resource monitor.

I'm installing Exchange 2007 CCR at a set of Windows server 2008 Virtual Machines.
When I refer the doc to Configure the Node and File Share Majority Quorum, at the step 3 -
Bring the new File Share Witness resource online by running the following command:
Cluster.exe res "File Share Witness (UNCPath)" /online
I got the following error:
System error 5018 has occurred (0x0000139a).
The cluster resource could not be brought online by the resource monitor.
How could I successfully Configure the Node and File Share Majority Quorum?

Your link brings me back to this thread. Not sure why, as I was able to find the article you reference with this link:
http://technet.microsoft.com/en-us/library/bb676490(v=EXCHG.80).aspx
To ensure this works, you need to make sure the Exchange Servers group is in the Administrators group on the server hosting your FSW.
FYI, Microsoft suggests that the FSW be hosted on a hub server. This simplifies management, since the Exchange administrators will already be able to manage the server the FSW is hosted on, and all permissions are already in place for the messaging
system.

The cluster resource could not be brought online due to an error bringing the dependency resource

hello
i am tring to install sql 2012 sp1 clyutering on Windows server 2012. every thing is fine until a get this error
The cluster resource 'SQL Server (SQLCLUSTER)' could not be brought online due to an error bringing the dependency resource 'SQL Network Name (ST-SQLCluster)' online. Refer to the Cluster Events in the Failover Cluster Manager
for more information. i don,t have permision issue.
any help for this please
Kamel
KAMEL

Hello,
Please read the following post:
http://blogs.msdn.com/b/psssql/archive/2013/09/30/error-during-installation-of-an-sql-server-failover-cluster-instance.aspx
Try to run the cluster validation wizard too:
http://technet.microsoft.com/en-us/library/cc732035(v=WS.10).aspx#BKMK_how_to_run
More about this topic on the following thread:
http://social.msdn.microsoft.com/forums/sqlserver/en-US/d217a651-1209-4300-904a-aefe0e05692c/network-name-not-going-online-during-install
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

ODBC error: The specified module could not be found. ?

Hi,
I have Oracle9i database installed on a test server. If I set the ODBC on the server (the TNS service name is ABCD), I can test it and run a VB application without any error. Then, I need to run the VB application on a client (Windows XP), that does not have any Oracle database installed. Following somebody's suggestion, I installed oo4o for Oracle9i which has the Universal Installer. Then, I installed the Oracle ODBC driver for Oracle9i. It looks okay because when I click Add under System DSN, it lists "Oracle in OraHome90" which is the same as I see on my oracle9i database server. However, the TNS service name is empty (on the database server, it lists ABCD). If I enter ABCD (or ABCD.xyz.com, the full global database host name)in it and run the test connection, I got: "The specified module could not be found" in OCI.DLL window. The listener.ora on the database server does show SID_LIST_LISTNER = ... (SID_NAME = ABCD).
Can somebody explain why? I definetly don't want to install the database client software on this client machine, I just want to run a VB or JAVA application on it to connect to the database server using ODBC, or something else if possible.
Any help is appreciated!
Harvey

Make sure it is the same version of 9i (i.e. 9.0.x or 9.2.x) for both OO4O and ODBC. Also make sure that the ORACE_BASE\ORACLE_HOME\BIN directory is in your search path AND last, check your windows directories and subdirectories for duplicate copies of OCI.DLL (or anywhere else on the PC for that matter). Sometimes MicroSoft will include one and it is usually an OLD one.

"The installer disc could not be found." What the...?

"The installer disc could not be found. Insert your Windows installer disc and wait a few seconds for the disc to be recognized."
Trying to install Windows 7 Ultimate. I have a Mid-2011 27" iMac, maxed out Core i7, RAM, and video, updated OS X Lion (11B26), and SSD. I created a partition via Boot Camp Assistant, downloaded drivers/whatnot via BC Asst. As far as I know, there is nothing wrong with the machine.
Purchased W7U through Parallels, they sent me the disc, started up BC Asst, and I get the above error message.
I can clearly see the disc in Finder. What's the deal?
(I roped myself into Parallels before I realized I didn't need it for what I wanted to do.)

Ask the people that sent or you bought Windows from.
There are extra steps if you have multiple disk drives like SSD and 2nd.
Windows sees OS X and GPT on another drive and won't install but you don't get that far.
Most people want Windows as a guest OS rather than have to dual boot though.
Go back to FAQ, Install, Guide http://www.apple.com/support/bootcamp

Dboraslib.dll - Error 126 : "The specified module could not be found."

Hi,
After installation XI 3.0 and adapters, the dispatcher(dispwork.exe) is failing to start in a ABAPJ2EE system (web AS 6.40).
The dev_disp trace file shows the following error:
Please do help to resolve this problem.
trc file: "dev_disp", trc level: 1, release: "640"
Mon Aug 09 12:14:43 2004
kernel runs with dp version 124000(ext=101000) (@(#) DPLIB-INT-VERSION-124000-UC)
length of sys_adm_ext is 524 bytes
ERROR => DlLoadLib: LoadLibrary(dboraslib.dll) Error 126 [dlnt.c 237]
 Error 126 = "The specified module could not be found."
systemid 560 (PC with Windows NT)
relno 6400
patchlevel 0
patchno 1
intno 0
make: multithreaded, Unicode
pid 2908
***LOG Q00=> DpSapEnvInit, DPStart (00 2908) [dpxxdisp.c 1093]
 shared lib "dw_xml.dll" version 1 successfully loaded
 shared lib "dw_xtc.dll" version 1 successfully loaded
 shared lib "dw_stl.dll" version 1 successfully loaded
 shared lib "dw_gui.dll" version 1 successfully loaded
Mon Aug 09 12:14:48 2004
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3878]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: JAVA is not active
DpShMCreate: sizeof(wp_adm) 10528 (1316)
DpShMCreate: sizeof(tm_adm) 2506872 (12472)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpShMCreate: sizeof(comm_adm) 290000 (580)
DpShMCreate: sizeof(vmc_adm) 0 (372)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: SHM_DP_ADM_KEY (addr: 06440040, size: 2919328)
DpShMCreate: allocated sys_adm at 06440040
DpShMCreate: allocated wp_adm at 06441B58
DpShMCreate: allocated tm_adm_list at 06444478
DpShMCreate: allocated tm_adm at 064444A0
DpShMCreate: allocated wp_ca_adm at 066A8518
DpShMCreate: allocated appc_ca_adm at 066AE2D8
DpShMCreate: allocated comm_adm_list at 066B0218
DpShMCreate: allocated comm_adm at 066B0230
DpShMCreate: allocated vmc_adm_list at 066F6F00
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 066F6F28
DpShMCreate: allocated wall_adm at 066F6F30
MBUF state OFF
Mon Aug 09 12:14:49 2004
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<EsNT> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 614 MB
<ES> 613 blocks reserved for free list.
ES initialized.
Mon Aug 09 12:14:52 2004
J2EE server info
start = TRUE
state = STARTED
pid = 3216
argv[0] = C:\usr\sap\SXI\DVEBMGS00/j2ee/os_libs/jcontrol.exe
argv[1] = C:\usr\sap\SXI\DVEBMGS00/j2ee/os_libs/jcontrol.exe
argv[2] = pf=C:\usr\sap\SXI\SYS\profile\SXI_DVEBMGS00_cgnlpt036
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1352
argv[5] = -DLISTEN_PORT=1353
argv[6] = -DSAPSYSTEM=00
argv[7] = -DSAPSYSTEMNAME=SXI
argv[8] = -DSAPMYNAME=cgnlpt036_SXI_00
argv[9] = -DSAPPROFILE=C:\usr\sap\SXI\SYS\profile\SXI_DVEBMGS00_cgnlpt036
argv[10] = -DFRFC_FALLBACK=ON
argv[11] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 2.0 2.0 3.1.1) [dpxxdisp.c 1455]
***LOG Q0K=> DpMsAttach, mscon ( cgnlpt036) [dpxxdisp.c 9701]
Mon Aug 09 12:14:54 2004
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 1
Release check o.K.
Mon Aug 09 12:15:33 2004
ERROR => W0 (pid 3224) died [dpxxdisp.c 12152]
ERROR => W1 (pid 3232) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W2 (pid 3240) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W3 (pid 3248) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W4 (pid 3256) died [dpxxdisp.c 12152]
ERROR => W5 (pid 3264) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W6 (pid 3272) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W7 (pid 3280) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-3224 (SIGUSR2)
ERROR => DpWpKill(3224, SIGUSR2) failed [dpxxtool.c 2464]
killing W1-3232 (SIGUSR2)
ERROR => DpWpKill(3232, SIGUSR2) failed [dpxxtool.c 2464]
killing W2-3240 (SIGUSR2)
ERROR => DpWpKill(3240, SIGUSR2) failed [dpxxtool.c 2464]
killing W3-3248 (SIGUSR2)
ERROR => DpWpKill(3248, SIGUSR2) failed [dpxxtool.c 2464]
killing W4-3256 (SIGUSR2)
ERROR => DpWpKill(3256, SIGUSR2) failed [dpxxtool.c 2464]
killing W5-3264 (SIGUSR2)
ERROR => DpWpKill(3264, SIGUSR2) failed [dpxxtool.c 2464]
killing W6-3272 (SIGUSR2)
ERROR => DpWpKill(3272, SIGUSR2) failed [dpxxtool.c 2464]
killing W7-3280 (SIGUSR2)
ERROR => DpWpKill(3280, SIGUSR2) failed [dpxxtool.c 2464]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:43 2004
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long) Mon Aug 09 06:45:43 2004
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 3224 Ended no 1 0 0
1 DIA 3232 Ended no 1 0 0
2 UPD 3240 Ended no 1 0 0
3 ENQ 3248 Ended no 1 0 0
4 BTC 3256 Ended no 1 0 0
5 BTC 3264 Ended no 1 0 0
6 SPO 3272 Ended no 1 0 0
7 UP2 3280 Ended no 1 0 0
Dispatcher Queue Statistics Mon Aug 09 06:45:43 2004
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
3
2000
10
10
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 13
wake_evt_udp_now 0
wake events total 9, udp 6 ( 66%), shm 3 ( 33%)
since last update total 9, udp 6 ( 66%), shm 3 ( 33%)
Dump of tm_adm structure: Mon Aug 09 06:45:43 2004
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Mon Aug 09 06:45:43 2004
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:48 2004
NiISelect: TIMEOUT occured (5000 ms)
Shutdown server ...
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=3216)
killing process (3216) (SOFT_KILL)
DpIJ2eeShutdown: j2ee state = SHUTDOWN
NiSelClear: removed hdl 3 from selectset
DpDelSocketInfo: del info for socket 3 (type=7)
NiBufClose: clear extensions for hdl 3
NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 3 / socket 456
NiSelClear: removed hdl 4 from selectset
DpDelSocketInfo: del info for socket 4 (type=9)
NiBufClose: clear extensions for hdl 4
NiBufSetStat: bufstat of hdl 4 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 4 / socket 448
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 5, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes...
Stop gateway
killing process (3172) (SOFT_KILL)
Stop icman
killing process (3196) (SOFT_KILL)
Terminate gui connections
[DpProcDied] Process lives (PID:3172 HANDLE:472)
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:49 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:3172 HANDLE:472)
[DpProcDied] Process died (PID:3196 HANDLE:464)
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
[DpProcDied] Process lives (PID:3216 HANDLE:440)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:50 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:51 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:52 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:53 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:54 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:56 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:57 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:58 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:59 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:00 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:01 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:02 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:03 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:04 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:05 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:06 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:3216 HANDLE:440)
NiIMyHostName: hostname = 'cgnlpt036'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 5, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9927]
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 5, data complete
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiSelClear: removed hdl 5 from selectset
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/8
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 19)
MBUF component DOWN
NiBufClose: clear extensions for hdl 5
NiBufSetStat: bufstat of hdl 5 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 5 / socket 368
MsIDetach: detach MS-system
EsCleanup ....
***LOG Q05=> DpHalt, DPStop ( 2908) [dpxxdisp.c 8460]
Good Bye .....

Hi,
Thanks for the reply.
dboraslib.dll is properly installed - I checked the registry and physical location of the file.
The problem was : Environment variable "Path" not being set properly for the "oracle jre".
Solution:
After setting the path, the dispatcher started to run properly without any problems.
Path=<Drive>\oracle\ora92\bin;<Drive>\Program files\Oracle\jre\1.3.1\bin; <Drive>\Program files\Oracle\jre\1.1.8\bin
FYI - We are using WIN2K with SP4 and oracle DB 9.2
Regards,
Sridhar

The definition of the READ RFC to the managed system could not be found. Pl

Hi there,
i try to setup a managed system on our Solution manager for E2E Analysis... but the Setup gave me a sort of errors
The definition of the READ RFC to the managed system could not be found. Please make sure to run the RFC creation assistant in SMSY, as described in setup documentation
and
No RFC Read User (SOLMANSOX001 or SM_SID) was found at ABAP Host=HOST sys=00 client=001 for roles assignment. Please make sure you have run the RFC creation assistant for this system, in SMSY. If a user name different from the default 'SM_<SID>' or 'SOLMAN<SID><CLIENT>' was specified in the SMSY RFC creation assistant, you need to assign by hand the following roles & profiles to the Read RFC User : SAP_SATELLITE_E2E (role), S_AI_SMD_E2E (profile)
So which documentation means the setup where is described how to create the RFC Destinations with SMSY.. Thanks
Regards
Edited by: Bjoern Bayerschmidt on May 17, 2010 5:45 PM

Hello,
The documentation is located at [Help|http://help.sap.com/saphelp_smehp1/helpdata/en/b3/64c33af662c514e10000000a114084/frameset.htm]
Then navigate Basic Settings > Solution Manager System Landscape > Create Systems > Generate RFC Connections
You can:
Assign an existing RFC destination to a client with Assign and Check RFC Destinations.
Generate RFC destinations for your managed systems
Change existing RFC connections.
Delete RFC destinations.
Resolve RFC Generation Errors
I hope you find this information helpful.
Regards,
Paul

DBD: Error while trying to load the transport provider for odbc. Failed to load the library. System error: The specified module could not be found.

Hello Everyone,
We are getting an error while trying to create an Universe via Microsoft -> MS Analysis Services 2014 -> OLEDB for OLAP Provider under Connection in UDT -"DBD: Error while trying to load the transport provider for odbc. Failed to load the library. System error: The specified module could not be found." We have installed BI 4.1 SP05 in our system. As per earlier posts in scn in BO XI 3.x this issue used to be for improper installation of Integration KIT but in our scenarion Integration KIT is within the BO 4.1 package so no seperate installation is required. Moreover I have checked whether all the driver is present under file: "C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\dataAccess\connectionServer\drivers" and seems everything is fine. But still I am getting this error. One important point is we could use IDT because in IDT still we don't have option to connect with 'Microsoft Analysis Services - 2014 (XMLA)' as we are using Microsoft Analysis Services 2014 version.
Kindly help if anyone has faced the same problem with SAP BO 4.1.
Thanks and Best Regards,
Ghosal

Hello Everybody,
The problem is solved now after installing "OLEDB drivers from SQL Server 2012 Feature Pack". We had OLEDB drivers that comes directly from SQL Server but that did not worked out in our case.
Thanks for your support.
Best Regards,
Ghosal

Collect metrics failed : requested resource could not be found (vSDatastore)

Hello,
I am working on Tidal Enterprise Orchestrator 2.3.0.441 (hotfix1 and 2, content update 1), part of CIAC starter edition.
Scheduled Collect metrics failed in ‘vSphere Datastores Data Sync’ at the last step : ‘Export Service Item Data’.
Failure appears in ‘NS API – Query SI’ :
The remote server returned an error: (404) Not Found. <nsapi-error-response>Requested resource could not be found.</nsapi-error-response>
The URL is http://XXX:8088/RequestCenter/nsapi/serviceitem/SivSDatastore/Name=Devo/datastore2
The account is nsapiuser and of course the item Devo/datastore2 exists in the Portal. I did not change the workflow.
Do you know what could be the issue ?
Thank you very much.
Cheers,
Nicolas

Probably you do not have all the proper permissions for the nsapi user.
Are they a site admin and CPTA?
do they belong to the Cloud Admin OU (as their home OU) and the Site admin OU?
After doing that, bounce the CCP server.
If you still have issues, use your support services contract and open a TAC case.
-Shaun Roberts
CIAC/CPO Support Team lead
[email protected]

Designer: dbd_sap.dll (the specified module could not be found)

Hi,
I installed BO Edge XI 3.1 server on Linux and the Edge XI 3.1 clients on WinXP PCs as well as the SAP Integration Kit on the server as well as on the clients. The transport files were imported too.
I can successfully connect to BW within the CMC -> Authentication -> SAP. I also can logon to InfoView, Designer,... with SAP BW credentials.
When I am trying to create a new universe and universe connection with SAP credentials I get the error:
"The error 'cs:dbdriver failed to load : c:\program files\business objects enterprise 12.0\win32_x86\dataaccess\connectionserver\dbd_sap.dll (the specified module could not be found)"
The dbd_sap.dll file is in the correct folder.
We re-installed the Integration Kit and rebooted, no success.
We are currently uninstalling all BO products (Client tools, Crystal Reports 2008, Integration Kit) on that client and will try again.
We are on the base version of the products mentioned; I read the changelog of the ServicePacks, it seems that none of the 2 SPs made a correction regarding this error.
What could be the error?
Thanks!

>
Efstratios Karaivazoglou wrote:
> Make sure to use CR Designer 2008 V1 (WITHOUT SP2) unless you install SP2 for BO Edge.
OK, so I will only install the BO Client Tools as well as the SAP Integration Kit. I don't necessarily need CR at this moment.
@ Raghu: we are on the base version of the BO Edge and SAP Integration Kit installation (= no SP, no FP)
EDIT:
I now installed the BusinessObjects Client Tools and the SAP Integration Kit on another PC, the error didn't occur on this PC

Java.io.IOException: The specified module could not be found

Hi.
I am using Runtime.exec() to run egrep on some files, and then trying to read its ouput in the following way:
String command2 = "egrep \"" + pattern +
"\" " + category + "egrep.txt";
Process p2 = Runtime.getRuntime().exec(command2);
double counterA = 0;
try {
BufferedReader fin3 = new BufferedReader(new InputStreamReader(p2.
getInputStream()));
String reader = "";
while ( (reader = fin3.readLine()) != null) {
counterA++;
if (counterA != 0)
//System.out.println(read + " ::: " + counterA);
fin3.close();
catch (Exception e) {
System.out.println("E");
And I get the following exception:
java.io.IOException: The specified module could not be found
at java.io.FileInputStream.readBytes(Native Method)
and this goes on to show exceptions in BufferedInputStream and then my code.
This does not happen all the time, so I cannot reproduce it easily. I have searched on google and in this forum looking for information but have not found out anything useful.
Help would be appreciated. Thanks.

The only possible reason for this error occurring that I can think of is that it is somehow a side effect of the limited buffer size for stdin and stderr.
For an example of emptying both output streams simultaneously, see the StreamGobbler class in this article:
http://www.javaworld.com/javaworld/jw-12-2000/jw-1229-traps.html
(this applies to unix, the author just mixed it in with his discussion of windows issues, just remove the "cmd.exe" and other windows stuff)
Another thing to try if only for the sake of experimentation would be to throw in a "exitValue = p2.waitFor()" just in case there's some unpredictable resource conflict going on (although I can't imagine why for egrep, but it's something to experiment with).
Let me know if you can narrow down the conditions for reproducing the bug.

SAPMMC -Error 126 = "The specified module could not be found."

Hi,
Finally i could install SAP Netweaver 2004s ABAP Trial version. But when i get started SAP Systems at SAPMMC, process List , the dispatcher does not work properly:
Thu Mar 22 08:19:14 2007
ERROR => DlLoadLib: LoadLibrary(dbsdbslib.dll) Error 126 [dlnt.c 237]
 Error 126 = "The specified module could not be found."
sysno 00
sid NSP
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 95
intno 20050900
make: multithreaded, ASCII, optimized
pid 1468
Does anybody know this problem?
Thx!!

Hello,
could it be that the disp+work.exe starts and then ends after a few seconds? I've had the same problem some days ago. Finally after 5 reinstallations and one new Windows installation, all works fine.
So maybe you could answer some questions
Have you installed the MS Loopbackadapter or are you connected to a network?
You need the MS Loopback if you aren't connected to a network.
How is the size of your virtual memory?
Should be great enough: 4096MB works fine.
What's the name of your computer?
Shouldn't be more than 13 characters.
Maybe this will help.
Michael

Some of the application resources could not be loc...

Hi everyone,
after (repeated) installation of PC Suite on a Windows Vista PC I still get the following error message, when PC Suite auto-starts:
"Some of the application resources could not be located. Please reinstall the application."
(The installation procedure itself runs w/o any problems.)
History:
- An older version of PC Suite was running w/o major problems on my PC. (Unfortunatly I don't remember the exact version.)
- Then I installed PC Suite 6.83 a few weeks ago, and saw the above error message the first time. Uninstalling & reinstalling did not help. So I was not able using PC Suite in the meantime.
- Today I tried it with the latest version 6.84, hoping that the underlaying problem might be fixed. Unfortunatly no changes.
- Again I uninstalled and reinstalled - also without Firewall or Virus Scanner - no success. The error message remains.
Additional details:
- Today, after my 1st installation try of 6.84 I also received the following information messages:
"Unable to load resources: C:\PROGRAM FILES\NOKIA\NOKIA PC SUITE 6\Lang\PCSync2_ger.nlr"
and
"Unable to load graphical resources: C:\PROGRAM FILES\NOKIA\NOKIA PC SUITE 6\Resource\PCSync2_ger.ngr".
- I searched for these two files and I found them.
- But interestingly these two messages don't show up anymore.
My system data:
- Windows Vista Business, 32 bit,
system updates from Windows Update installed
- Nokia PC Suite: 6.84.10.3 ger
Does anybody know help?
Is there a log file somewhere that I could use to understand which resources are actually missing?
@Nokia: When is PC Suite Cleaner planned to be available for 6.83 and later versions and for Vista?
Many thank in advance
Christian

Hi - I know this forum thread is probz a little old now but I want to ressurect it because I have in recent days updated my software from PC Suite 6 to 7 on my Vista system and have encountered the same bug. See the following thread:
/discussions/board/message?board.id=swupdate&thread.id=35845
Has anyone found a solution this poblem as yet?
Nokia N81 SD
Sandisk 2Gb Micro SD with adaptor

The remote computer could not be found. please contact your helpdesk

RDS Farm set up as follows 3- RD Session Host/Web servers set up as network load balanced and 2-RD Connection broker servers set up as clustered servers. I access the RdWeb farm from the internet via VPN clientless. I can get into
RdWeb with no problems, however I have few clients that can connect to RdWeb portal but once they open any application icon the error gets displayed "the remote computer could not be found. please contact your helpdesk ". The client
pc is Windows 8 with IE11 and Windows 7 with IE 10. I could not find anything that related to some users that could not connect. Help!

Hi,
Firstly please provide some more information from your side.
1. Does the other user can able to work properly without any issue?
2. Did you install the RD gateway role to allow the external user to access the internal resource? If so, please help to make sure you configure the FQDN for the RD gateway, and the external users can resolve this name on the internet.
3. Can you telnet the RD host server (like telnet server name 3389) to check whether the RD host server is available for another server?
4. Did you try to temporarily disable all of firewall and anti-virus to test if this issue persists?
You can configure RD Web Access behavior on IIS manager as per below.
IIS Manager Console > Default Web Site > RDWeb > Pages > Application Settings > DefaultTSGateway > add the "FQDN of the Remote Desktop Gateway"
After finishing all above steps, please launch the RemoteApp again to see if the same issue still exists. For more information, you can refer beneath article.
Configure Remote Desktop Web Connection Behavior
Hope it helps!
Thanks.

AE CS6 won't export MP4. "Some of the required components could not be found."

After Effects CS6 (from Production Premium) running on 64-bit Windows 7 Enterprise SP1.
Processor: Intel Core i7-3930K CPU @ 3.20GHz
AMD Radeon HD 7900 Series video card
64 Gb Corsair Ram (DDR3)
Quicktime 7.7.4 Installed
Currently attempting to export a short (2 second) video based on the predefined "H.264" preset with the only alterations being that I want the VBR 1 Pass to target 3.5Mbs (though I've changed this with no difference in outcome) and I want the video to multiplex as MP4. I immediatley get the error prompt: "Some of the required components could not be found."
*Just tried using the 3GPP multiplexer and received the same error message. If I try to use the MPEG4 format I get an "unknown exception" error.*
I've exported literally hundreds of items as H.264 with a MP4 multiplexer on this machine with current hardware and software. And now...no dice. After Effects boots correctly (or at least it seems that way) though I think it takes a little longer than it used to (not sure if the system cache just needs to be rebuilt).
After Effects CS6 has all available Adobe updates. Quicktime 7.7.4 is also up-to-date. Video Card driver is up-to-date.
What could be going on? I'd prefer to skip re-installing this program. I've had to do this numerous times already with this suite throughout the past 12 months; really getting sick of the down-time during reinstall. Worth noting that I have closed the program, closed all programs, restarted computer multiple times.
I am currently going through my Adobe program files for After Effects. I am specifically looking through the 'Support Files' directory. A couple interesting things: 1. My 'MediaIO->Codecs' directory was last updated on 11/8/2013 (perhaps an AE update??) but each of the files within said directory have a last modified date of late September. Did something get wrongfully deleted in the hypothetical update? 2. In 'Media Core plugins->Common' I again have a last modified date of 11/8/2013, but again each of my files within the common directory were last modified late September. I have many expected .prm files but NO ImporterMPEG4.prm; should I have a MPEG4 specific importer file, or does the MPEG importer file do all of the work. Also, I have no ExporterMP4 (or anything of the MPEG, MPEG2, MPEG4 flavor). Should I have one of these?
Don't know if this last paragraph helps at all but my fingers are crossed.

Thanks Katrina for all your help.
I talked to an Apple tech support person. Actually, my call had to be elevated to the next support level. Joy. You are correct, there are multiple listings of the files in the error report even though there is only one copy.
The support person had me do a few things. Here is what eventually seems to fix things:
1) For the mp3's that DID copy but were listed as not found... Some files were duplicated so deleting the duplicate with the "!" was an easy fix. I found one file that I could search by song name in iTunes but could not find it by song name search on the iPod. Looking at the iPod playlist I found the file listed by the filename (not song name) and the file played fine. Then in iTunes I double clicked on the song name ("!" showing) and selected locate. I then pointed to the location on the NAS. Resync and now the name of the song on the iPod changed from filename to song name. The file was no longer listed in the error report.
2) For the m4a files that didn't sync... the problem songs appeared three times in a search in iTunes. Two of the listings showed the "!" next to the name. I deleted these two for each song that didn't sync and all transferred fine afterward.
Perhaps there is an issue with ID3 tags since I use filenames more than tags in organization. Still, I would think that iTunes would not get so confused or be a little more friendly with its errors, especially considering how long its been around.
Thanks again for your help. Looks like I have a manual way to correct this issue.

The cluster resource could not be found-SAP ECC on Windows Server 2008 MSCS

Similar Messages

Maybe you are looking for