The Cluster service is shutting down because quorum was lost

Hi, we recently experienced the above issue and after looking for explanations I haven't been able to find any satisfying answers when other people have posted this issue.
Our problem is as follows:
2 node 2008R2 cluster running SQL 2012
Each node is a HP BL460c running in a HP C7000 Blade Chassis.
We were updating the flexfabric cards on one of the chassis. The other chassis had been patched the previous week with no problems.
During the update process the flexfabric cards, which hold the Ethernet and FC connections, reboot so before work had begun all active cluster services had been failed over to the node in the chassis not being worked on. However despite this the cluster
service shut down on this one particular cluster. All other clusters running across these 2 chassis continued to run as expected.
As other people have posted before we saw the following errors in the system log.
1564: File share witness resource 'File Share Witness' failed to arbitrate for the file share
1069: Cluster resource 'File Share Witness' in clustered service or application 'Cluster Group' failed.
1172: The Cluster service is shutting down because quorum was lost. This could be due to the loss of network connectivity between some or all nodes in the cluster, or a failover of the witness disk.
Run the Validate a Configuration wizard to check your network configuration. If the condition persists, check for hardware or software errors related to the network adapter. Also check for failures in any other network components to which the node is connected
such as hubs, switches, or bridges.
However we cant understand what could cause this to happen when the service is running on the node in the chassis not being updated, especially when the same update was performed the week before with no issues. How can both nodes lose connectivity
to the File Share Witness at the same time?
Cluster Validation tests run fine and don't highlight any issues. The file share witness is accessible from both servers.

Hi,
Please confirm you have install the Recommended hotfixes and updates for Windows Server 2008 R2 SP1 Failover Clusters update, especially the following hotfix.
The network location profile changes from "Domain" to "Public" in Windows 7 or in Windows Server 2008 R2
http://support.microsoft.com/kb/2524478/EN-US
A hotfix is available that adds two new cluster control codes to help you determine which cluster node is blocking a GUM update in Windows Server 2008 R2 and Windows Server
2012
http://support.microsoft.com/kb/2779069/EN-US
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

AnyConnect - VPN Service is shutting down because a critical component cannot be initialized. Need a reboot

Hi,
I keep getting this error " VPN Service is shutting down because a critical component cannot be initialized. Need a reboot" when even i launch
AnyConnect App.
I am using AnyConnect App on Nexus 4 with Android 5.0. Any work around other than deleting cache and data.
Please let know.

Hi ,
check this bug description CSCud51366, it could be useful.
Hope this helps.

Failover cluster not cleanly shutting down service

I've got a two node 2008 R2 failover cluster. I have a single service being managed by it that I configured just as a generic service. The failover works perfectly when the service is stopped, or when one of the machines goes down, and the immediate
failback I have configured works perfectly in both scenarios as well.
However, there's an issue when I take the networking down on the preferred owner of the service. As far as I can tell (this is the first time I've tried failover clustering, so I'm learning), when I take the networking down, the cluster service shuts
down, and in turn shuts down the service I've told it to manage. At this point, when the services aren't running, the service fails over to the secondary as intended. The problem shows up when I turn the networking back on. The service tries
and fails to start on the primary (as many times as I've configured it to try), and then eventually gives up and goes back to the secondary.
The reason for this, examining logs for the service, is that the required port is already in use. I checked some more, and sure enough, when I take the networking offline the service gets shut down, but the executable is still running. This is
repeatable every time. When I just stop the service, though, the executables go away. So it's something to do specifically with how the managed service gets shut down *when it's shut down due to the cluster service stopping*. For some reason
it's not cleaning up that associated executable.
Any ideas as to why this is happening and how to fix/work around it would be extremely welcome. Thank you!

Try to generate cluster log using closter log /g /copy:<path to a local folder>. You might need to bump up log verbosity using cluster /prop ClusterLogLevel=5 (you can check current level using cluster /prop).
You also can look at the SCM diagnostic channel in the event viewer. Start eventvwr. Wait for the clock icon on the Application and Services Logs to go away. Once the clock icon is gone select this entry and in the menu check Show Analytic and Debug Logs.
Now expand to the SCM provider located at
Application and Services Logs\Microsoft\Service Control Manager Performance Diagnostic Provider\Diagnostic.
or Microsoft-Windows-Services/Diagnostic
Enable the log, run repro, disable the log. After that you should see events from the SCM showing you your service state transitions.
The terminate parameters do not seems to be configurable. I can think of two ways fixing the issue
- Writing your own cluster resource DLL where you can implement your own policies. THis would be a place to start http://blogs.msdn.com/b/clustering/archive/2010/08/24/10053405.aspx.
- This option is assuming you cannot change the source code of the service to kill orphaned child processes on startup so you have to clenup using some other means. Create another service and make your service dependent on this new service. This new serice
must be much faster in responding do the SCM commands. On start of this service you using PSAPI enumirate all processes running on the machine and kill the orphaned child processes. You probably should be able to acheve something similar using GenScript resource
+ VB script that does the cleanup.
Regards, Vladimir Petter, Microsoft Corporation

Logger Service keeps shutting down and restarting

Hello,
I have upgraded my lab UCCE call center to v9.0
I have a simplexed environment
Ever since, the logger service keeps shutting down and restarting.
Recently, the node manager issued an error message and shut down the server
I tried to check some logs but I point out the problem, there are errors in different processes.
Attached are the logs.

Hi,
if the NM tries to reload the server, it indicates a Problem (capital inteded).
Indeed, there's something interesting going on:
08:29:11:822 la-rpl Trace: Starting Recovery Key for Admin table is 6717118506000.0
08:29:11:822 la-rpl Trace: The largestkey = 7201232308043.0 >= startkey = 6717118506000.0
08:29:11:823 la-rpl Trace: To correct this problem: Stop logger service. Use ICMDBA tool to sync configuration data from its partner logger database. Restart logger service.
08:29:11:823 la-rpl Fail: Assertion failed: largestkey < startkey. File: ICRDB.CPP. Line 742
08:29:11:860 la-rpl Trace: CExceptionHandlerEx::GenerateMiniDump -- A Mini Dump File is available at logfiles\replication.exe_20130523082911824.mdmp
08:29:12:074 la-rpl Unhandled Exception: Exception code: 80000003 BREAKPOINTFault address: 754A3219 01:00012219 C:\Windows\syswow64\KERNELBASE.dllRegisters:EAX:00000000EBX:00000000ECX:00001890EDX:E1043F00ESI:015F8AB0EDI:00000005CS:EIP:0023:754A3219SS:ESP:002B:003CE2D8 EBP:003CE2E0DS:002B ES:002B FS:0053 GS:002BFlags:00000246Call stack:Address Frame754A3219 003CE2E0 DebugBreak+26EB1459C 003CE2EC EMSAbortProcess+C6EB1ACD1 003CF7F8 EMSReportCommon+1A16EB1ADBB 003CF818 EMSFailMessage+2B013BBE5A 003CF8A8 ICRDb::ICRDb+44A013B2FE2 003CF9B8 main+582015D96C2 003CF9FC NtCurrentTeb+174767333AA 003CFA08 BaseThreadInitThunk+1277449EF2 003CFA48 RtlInitializeExceptionChain+6377449EC5 003CFA60 RtlInitializeExceptionChain+36
The short version: configuration data is corrupt.
The longer version: the above message in red informs about the result of a sanity check. Each configuration change creates a new row in one of the tables holding the config info, and each row contains a RecoveryKey which is usually a large number incremented by the insertion. The error message says the largest key (= last key) contains a value that is lower than the first key. Naturally, this is something to consider for a lonely philosopher, but the rigid world of Cisco ICM does not allow metaphysical phenomena. Lower numbers are supposed to be lower than higher numbers.
This, of course, raises an exception and the Logger service restarts. If there are too many restarts, the Node Manager kicks in and restarts the machine - this is just a mechanism that prevents a larger extent of data corruption.
Now, if there's an other side Logger - fine, as the error message suggests, you can initiate manual replication (provided the other Logger database contains valid information).
Unfortunately, as you have written, this is a side A only environment. This may mean:
- accepting the situation, stopping ICM, throwing out the logger database, recreating it and reinstalling the Logger service,
- poking around in various tables to check what may be saved - this may mean the beginning of an adventure.
G.

HT1414 Anybody have an ipad that will not power on, for no reason? My ipad always worked fine and then one day it shut down because the battery was low so I plugged it in and it will not power on. Tryed the hard reset option still no power on :(

Anybody have an ipad that will not power on, for no reason? My ipad always worked fine and then one day it shut down because the battery was low so I plugged it in and it will not power on. Tryed the hard reset option still no power on

You can try recovery mode to see if you can revive the iPad.
http://support.apple.com/kb/ht4097
Have you left the iPad charging for a couple of hours or so to be sure?

SQL 2008 R2: Microsoft SQL Server Management Studio cannot shut down because a modal dialog is active. Close the active dialog and try again

When starting SQL Server 2008 R2 it hangs , and I cannot exit...so when trying to logoff to reset I get the following "Microsoft SQL Server Management Studio cannot shut down because a modal dialog is active. Close the active dialog and try again"Any
ideas?

Big edit...
I have 2008 R2 SP2 installed on my Windows 7 Machine which is also fully updated. The marked answer above is clearly not the solution.
The fix I had posted before did not work. It appeared to work temporarily, but now I am back to the same invisible dialogue. I have not been able to identify any pattern by which this is triggered. I can have an entire day without this
issue and then it appears the next.
The invisible modal dialogue is definitely the connection dialogue. The only way out is to hit the escape key to close it, but then I am no better off without an ability to connect to a server. The dialogue is still invisible when I re-open it.
However, even as I type this post, I have just gotten the dialogue to appear after restarting Management Studio, hitting escape, then clicking connect again. That same pattern failed just minutes ago numerous times. Again, I can't find any pattern.
See you in the clock tower.

Macbook Pro shut down because the battery power ran out. Now I cannot start it and the battery will not charge. Only one green battery charge light lights up and blinks.

My Macbook Pro shut down because the battery power ran out. Now I cannot start it and the battery will not charge. Only one green battery charge light lights up and blinks on the left side. I am running Lion. How do I get this to charge and turn on? Thanks

If your model Macbook Pro is the calibrating model, let the battery calibrate.
If not, and are still under warrant or have Apple Care, give them a call and get a case number. Otherwise, take the computer to an Apple store or an AASP. Whichever is more convenient for you.

I suddenly cannot open my mailbox AND my computer won't shut down because the mailbox is open - it won't open OR close!

I suddenly cannot open my mailbox. When I tried to restart my computer (thinking THIS might help), I get the message "The application Mail canceled shut down." Any ideas? Thank you!

Right click the Mail icon in the dock, then click option to force quit the mail program.

3 out 4 isn't bad, the 4th one is shutting down

I just got 4 822's Friday. 3 of them work fine, the 4th one is
shutting down. So we have been doing the pull the battery routine.
I called customer service on Sunday. They were very helpful,
said we have to do a full software reload as the first step, if this does not
work call us back and we will ship you a new phone. Very professional and I
felt good after the call.
I called today, because the software reload did not fix the
issue. A different Verizon answered. The Verizon "customer service" I
got today was up sale central. Can some logic be applied to your phone scripts?
If I just upgraded everything 4 days ago, do you really think I want again so soon?
Also if I am calling back on a repeat issue, do you feel I will be in the mood
to listen to the sales pitch? After today's call, I am frustrated and concerned
that there will be mistakes made in which phone I need replaced and if they
made changes to my account.
After saying no every way I know how, they finally decided to
send me a replacement phone. Hopefully this one will be like the other 3.

Try to ping 4.2.2.2 .
If you get replies from the same number then try to ping yahoo.com and see if you get replies.
If you get replies from 4.2.2.2 and not from yahoo.com then try to assign a static DNS address.
Open network connections. Right click on wireless network connection and go to properties. Select internet protocol V4 TCP/IP and click on properties.
Select the option ' Use the following DNS server addresses'. In the preferred DNS server type 192.168.1.1 and in the Alternate DNS server type 4.2.2.2. Click OK.

My battery dies quicker than before, even without using the phone .aslo it shuts down unxpectedly (sometimes shuts down at 30% then i cant restart it until i blog it to the charger) and sometimes jumps from 40% to 20% or from 20% to 3%

hi!
my battery dies quicker than before, even without using the phone
aslo it shuts down unxpectedly (sometimes shuts down at 30% then i cant restart it until i blog it to the charger)
and sometimes jumps from 40% to 20% or from 20% to 3%
i have done many things people recommanded it for me like :
restore : i've done two restores and it gets better for the first 1-2 weeks then it gets worse than before.
also deleted my music list (19gb) in order to make this better (as recommended) but it still the same
my screen brightness is always ALWAYS low , almost the lowest.
i close the apps when i finish using them ALL OF THEM
i dont use the camera and flash , almost rarely. just to save battery.
i dont use the location service always.
i dont charge my phone until it shuts down and i dont unblog it until it reachs 100%
basically i have tried eveything.

Install or Reinstall OS X from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
      left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
      the Security button and set the Zero Data option to one-pass. Click on
      the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
           because it is three times faster than wireless.

Since upgrading to Yosemite my computer closes down instead of going to sleep. When I restart I get a message saying your computer shut down because of a problem. Has anyone a similar problem? What is solution?

Since upgrading to Yosemite my computer (iMac late 2012 model) closes down instead of going to sleep. When I restart I get a message saying "your computer shut down because of a problem". Does anyone have similar problem? What is the solution?

Sorry, I was acting like it was an email. See below:
Sat Nov 8 14:00:39 2014
Panic Report ***
panic(cpu 0 caller 0xffffff802a21e80a): Kernel trap at 0xffffff7fabaa5e28, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000000, CR3: 0x000000002d4e8000, CR4: 0x00000000001626e0
RAX: 0x0000000000000000, RBX: 0xffffff803cbbf000, RCX: 0x0000000000000000, RDX: 0x0000000000000000
RSP: 0xffffff81352f3b50, RBP: 0xffffff81352f3bf0, RSI: 0x0000000000000240, RDI: 0xffffff803cbbf000
R8: 0x0000000000000000, R9: 0x0000000000000000, R10: 0x000000e492137674, R11: 0x000000e4917aebcc
R12: 0x0000000000000000, R13: 0x000000000000023e, R14: 0xffffff803cc90000, R15: 0x0000000000000000
RFL: 0x0000000000010293, RIP: 0xffffff7fabaa5e28, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x0000000000000000, Error code: 0x0000000000000002, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff81352f3800 : 0xffffff802a13a811
0xffffff81352f3880 : 0xffffff802a21e80a
0xffffff81352f3a40 : 0xffffff802a23a443
0xffffff81352f3a60 : 0xffffff7fabaa5e28
0xffffff81352f3bf0 : 0xffffff7fabbbd0a2
0xffffff81352f3cb0 : 0xffffff7fab9a64a3
0xffffff81352f3d00 : 0xffffff7fab9a91be
0xffffff81352f3db0 : 0xffffff7fab9a80f2
0xffffff81352f3dc0 : 0xffffff802a6d8008
0xffffff81352f3e20 : 0xffffff7fab9a8d0b
0xffffff81352f3e50 : 0xffffff802a6c5a03
0xffffff81352f3ee0 : 0xffffff802a6be797
0xffffff81352f3f00 : 0xffffff802a16be13
0xffffff81352f3fb0 : 0xffffff802a2192c7
      Kernel Extensions in backtrace:
         com.apple.driver.AirPort.Brcm4360(900.19.8)[E6DF5F6D-3476-3BA6-B49B-BAADEC7DF58 0]@0xffffff7fab994000->0xffffff7fabf6afff
            dependency: com.apple.driver.mDNSOffloadUserClient(1.0.1b8)[25CEDABE-0952-309D-AC20-A39DF84 9DFB7]@0xffffff7fab679000
            dependency: com.apple.iokit.IO80211Family(700.52)[13EA5B53-E76C-3F27-A9CA-6D3B59AE6F44]@0xf fffff7fab8e1000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[766FC23F-452C-3B74-951C-598BB17BCF06]@0xffffff 7faa924000
            dependency: com.apple.iokit.IONetworkingFamily(3.2)[247581D8-DFC5-3AAE-B079-3D13F5514C2B]@0 xffffff7fab235000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
14A389
Kernel version:
Darwin Kernel Version 14.0.0: Fri Sep 19 00:26:44 PDT 2014; root:xnu-2782.1.97~2/RELEASE_X86_64
Kernel UUID: 89E10306-BC78-3A3B-955C-7C4922577E61
Kernel slide:     0x0000000029e00000
Kernel text base: 0xffffff802a000000
__HIB text base: 0xffffff8029f00000
System model name: iMac13,1 (Mac-00BE6ED71E35EB86)
System uptime in nanoseconds: 981693498948
last loaded kext at 264463654768: com.apple.filesystems.msdosfs      1.10 (addr 0xffffff7facd6e000, size 69632)
last unloaded kext at 325959214682: com.apple.filesystems.msdosfs 1.10 (addr 0xffffff7facd6e000, size 61440)
loaded kexts:
com.apple.driver.AudioAUUC           1.70
com.apple.filesystems.autofs            3.0
com.apple.driver.AppleBluetoothMultitouch         85.3
com.apple.iokit.IOBluetoothSerialManager            4.3.0f10
com.apple.driver.AppleHWSensor   1.9.5d0
com.apple.driver.AppleMikeyHIDDriver     124
com.apple.driver.AGPM        100.14.37
com.apple.driver.ApplePlatformEnabler    2.1.0d1
com.apple.driver.X86PlatformShim            1.0.0
com.apple.driver.AppleOSXWatchdog        1
com.apple.driver.AppleMikeyDriver           266.5
com.apple.driver.AppleHDA 266.5
com.apple.driver.AppleUpstreamUserClient          3.6.1
com.apple.GeForce    10.0.0
com.apple.iokit.IOUserEthernet       1.0.1
com.apple.Dont_Steal_Mac_OS_X      7.0.0
com.apple.driver.AppleThunderboltIP       2.0.2
com.apple.driver.AppleHWAccess   1
com.apple.driver.AppleHV    1
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport           4.3.0f10
com.apple.driver.AppleSMCLMU     2.0.4d1
com.apple.driver.AppleLPC 1.7.3
com.apple.driver.AppleIntelHD4000Graphics       10.0.0
com.apple.driver.AppleIntelFramebufferCapri     10.0.0
com.apple.driver.AppleMCCSControl          1.2.10
com.apple.iokit.SCSITaskUserClient            3.7.0
com.apple.driver.AppleUSBODD      3.5.0
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless      1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache            35
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage           2.6.5
com.apple.iokit.AppleBCM5701Ethernet   10.1.2b3
com.apple.driver.AppleSDXC           1.6.5
com.apple.driver.AirPort.Brcm4360           900.19.8
com.apple.driver.AppleAHCIPort     3.0.7
com.apple.driver.AppleUSBHub      705.4.1
com.apple.driver.AppleUSBXHCI     705.4.14
com.apple.driver.AppleUSBEHCI     705.4.14
com.apple.driver.AppleHPET           1.8
com.apple.driver.AppleACPIButtons           3.1
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleSMBIOS       2.1
com.apple.driver.AppleACPIEC        3.1
com.apple.driver.AppleAPIC            1.7
com.apple.driver.AppleIntelCPUPowerManagementClient          218.0.0
com.apple.nke.applicationfirewall   161
com.apple.security.quarantine        3
com.apple.security.TMSafetyNet     8
com.apple.driver.AppleIntelCPUPowerManagement        218.0.0
com.apple.kext.triggers         1.0
com.apple.driver.AppleBluetoothHIDKeyboard    175.5
com.apple.driver.AppleHIDKeyboard         175.5
com.apple.driver.IOBluetoothHIDDriver    4.3.0f10
com.apple.driver.AppleMultitouchDriver   260.30
com.apple.iokit.IOSerialFamily         11
com.apple.driver.DspFuncLib          266.5
com.apple.kext.OSvKernDSPLib      1.15
com.apple.iokit.IOAudioFamily         200.6
com.apple.vecLib.kext           1.2.0
com.apple.nvidia.driver.NVDAGK100Hal    10.0.0
com.apple.nvidia.driver.NVDAResman        10.0.0
com.apple.iokit.IOBluetoothHostControllerUSBTransport            4.3.0f10
com.apple.iokit.IOBluetoothFamily 4.3.0f10
com.apple.iokit.IOUSBUserClient     705.4.0
com.apple.driver.AppleThunderboltEDMSink       4.0.2
com.apple.driver.AppleSMBusPCI   1.0.12d1
com.apple.driver.X86PlatformPlugin          1.0.0
com.apple.driver.AppleSMC 3.1.9
com.apple.driver.IOPlatformPluginFamily 5.8.0d49
com.apple.driver.AppleHDAController        266.5
com.apple.iokit.IOHDAFamily           266.5
com.apple.iokit.IOSurface     97
com.apple.iokit.IOAcceleratorFamily2         156.4
com.apple.AppleGraphicsDeviceControl     3.7.21
com.apple.iokit.IONDRVSupport      2.4.1
com.apple.driver.AppleSMBusController    1.0.13d1
com.apple.iokit.IOGraphicsFamily    2.4.1
com.apple.iokit.IOSCSIBlockCommandsDevice       3.7.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice        3.7.0
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily          1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOUSBMassStorageClass     3.7.0
com.apple.iokit.IOSCSIArchitectureModelFamily   3.7.0
com.apple.driver.AppleUSBMergeNub       705.4.0
com.apple.driver.AppleUSBComposite        705.4.9
com.apple.driver.AppleThunderboltDPInAdapter            4.0.6
com.apple.driver.AppleThunderboltDPOutAdapter         4.0.6
com.apple.driver.AppleThunderboltDPAdapterFamily    4.0.6
com.apple.driver.AppleThunderboltPCIDownAdapter     2.0.2
com.apple.driver.AppleThunderboltNHI    3.1.7
com.apple.iokit.IOThunderboltFamily         4.2.1
com.apple.iokit.IOEthernetAVBController 1.0.3b3
com.apple.iokit.IO80211Family       700.52
com.apple.driver.mDNSOffloadUserClient 1.0.1b8
com.apple.iokit.IONetworkingFamily           3.2
com.apple.iokit.IOAHCIFamily          2.7.0
com.apple.iokit.IOUSBFamily            705.4.14
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime            2.0
com.apple.iokit.IOHIDFamily            2.0.0
com.apple.iokit.IOSMBusFamily       1.1
com.apple.security.sandbox 300.0
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.AppleKeyStore     2
com.apple.driver.AppleMobileFileIntegrity            1.0.5
com.apple.driver.AppleCredentialManager           1.0
com.apple.driver.DiskImages           389.1
com.apple.iokit.IOStorageFamily      2.0
com.apple.iokit.IOReportFamily       31
com.apple.driver.AppleFDEKeyStore          28.30
com.apple.driver.AppleACPIPlatform         3.1
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.corecrypto     1.0
com.apple.kec.Libm   1
com.apple.kec.pthread          1
Model: iMac13,1, BootROM IM131.010A.B05, 4 processors, Intel Core i5, 2.7 GHz, 8 GB, SMC 2.9f5
Graphics: NVIDIA GeForce GT 640M, NVIDIA GeForce GT 640M, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54333531533643465238432D50422020
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54333531533643465238432D50422020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xF4), Broadcom BCM43xx 1.0 (7.15.124.12.8)
Bluetooth: Version 4.3.0f10 14890, 3 services, 27 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: APPLE HDD ST1000LM024, 1 TB
USB Device: HD-LBU3
USB Device: Hub
USB Device: Apple USB SuperDrive
USB Device: FaceTime HD Camera (Built-in)
USB Device: Hub
USB Device: Hub
USB Device: BRCM20702 Hub
USB Device: Bluetooth USB Host Controller
Thunderbolt Bus: iMac, Apple Inc., 23.4

Your computer has shut down because of a problem

Hi there,
I have a Macbook Air which is about 3 months old now, and in the last couple of months, applications have started hanging, the keyboard is sluggish in Safari, and more specifically, I've had loads of times when I've opened the lid after the machine has been on sleep, and received the message "Your computer has shut down because of a problem".
I've been on to Apple support, and they took me through how to repair disk permissions, reset the System Management Controller, and clear the caches. But I just had the same thing this morning.
The latest kernel panic from the Console is shown below - is anyone able to shed any light on this?
Thanks
Stuart
Sun Jan 20 02:12:31 2013
panic(cpu 2 caller 0xffffff8005ab7e75): Kernel trap at 0xffffff8005a43ca1, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xffffff801b98ed88, CR3: 0x0000000007d01000, CR4: 0x00000000001606e0
RAX: 0x0000000000000000, RBX: 0x0000000000000000, RCX: 0x0000000009000000, RDX: 0xffffff80171cf7c0
RSP: 0xffffff80f61db2c0, RBP: 0xffffff80f61db2f0, RSI: 0xffffff80f61db398, RDI: 0xffffff80171cf7b0
R8: 0x0000000000000000, R9: 0x0000000000000132, R10: 0xffffff80f61dbe90, R11: 0x000000000feaa000
R12: 0xffffff801b98ed80, R13: 0xffffff80171cf7b0, R14: 0xffffff80f61db398, R15: 0xffffff80060e0ad0
RFL: 0x0000000000010282, RIP: 0xffffff8005a43ca1, CS: 0x0000000000000008, SS: 0x0000000000000000
Fault CR2: 0xffffff801b98ed88, Error code: 0x0000000000000000, Fault CPU: 0x2
Backtrace (CPU 2), Frame : Return Address
0xffffff80f61daf60 : 0xffffff8005a1d626
0xffffff80f61dafd0 : 0xffffff8005ab7e75
0xffffff80f61db1a0 : 0xffffff8005acd3bd
0xffffff80f61db1c0 : 0xffffff8005a43ca1
0xffffff80f61db2f0 : 0xffffff8005a435d2
0xffffff80f61db3d0 : 0xffffff8005a245ed
0xffffff80f61db400 : 0xffffff8005def11a
0xffffff80f61db420 : 0xffffff8005def2d2
0xffffff80f61db450 : 0xffffff8005e50530
0xffffff80f61db470 : 0xffffff8005e501d1
0xffffff80f61db500 : 0xffffff8005e4fd3c
0xffffff80f61db560 : 0xffffff7f860161be
0xffffff80f61db600 : 0xffffff8005b1f855
0xffffff80f61db660 : 0xffffff8005adabe1
0xffffff80f61db750 : 0xffffff8005b1292e
0xffffff80f61db780 : 0xffffff8005ae16cf
0xffffff80f61db8c0 : 0xffffff8005ae0d6a
0xffffff80f61db920 : 0xffffff8005ae0c05
0xffffff80f61db950 : 0xffffff8005cfe410
0xffffff80f61db9f0 : 0xffffff8005b12549
0xffffff80f61dba50 : 0xffffff8005dbe4ec
0xffffff80f61dbad0 : 0xffffff8005a0508b
0xffffff80f61dbef0 : 0xffffff8005a06b9f
0xffffff80f61dbf60 : 0xffffff8005a85b38
0xffffff80f61dbfb0 : 0xffffff8005ab2957
      Kernel Extensions in backtrace:
         com.apple.iokit.IOStorageFamily(1.8)[A3CC4E44-8E10-3D9A-BA8E-95743E79D125]@0xff ffff7f8600a000->0xffffff7f8602efff
BSD process name corresponding to current thread: kernel_task
Mac OS version:
12C3006
Kernel version:
Darwin Kernel Version 12.2.1: Thu Oct 18 16:32:48 PDT 2012; root:xnu-2050.20.9~2/RELEASE_X86_64
Kernel UUID: 0AFA55FD-872F-3BBE-8630-214EB586A16D
Kernel slide:     0x0000000005800000
Kernel text base: 0xffffff8005a00000
System model name: MacBookAir5,2 (Mac-2E6FAB96566FE58C)
System uptime in nanoseconds: 33825093742539
last loaded kext at 30812273362661: com.trusteer.driver.gakl_driver_2    1 (addr 0xffffff7f8766b000, size 28672)
last unloaded kext at 15361113093292: com.apple.driver.AppleUSBCDC    4.1.22 (addr 0xffffff7f8765d000, size 12288)
loaded kexts:
com.trusteer.driver.gakl_driver_2    1
net.telestream.driver.TelestreamAudio    1.1.0
com.apple.filesystems.smbfs    1.8
com.apple.filesystems.autofs    3.0
com.apple.iokit.IOBluetoothSerialManager    4.1.2f9
com.apple.driver.X86PlatformShim    1.0.0
com.apple.driver.AGPM    100.12.81
com.apple.driver.ApplePlatformEnabler    2.0.6d1
com.apple.driver.AppleMikeyHIDDriver    122
com.apple.driver.AppleHDA    2.3.5fc10
com.apple.driver.AppleSMCPDRC    1.0.0
com.apple.driver.AppleLPC    1.6.0
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport    4.1.2f9
com.apple.driver.AudioAUUC    1.60
com.apple.driver.AppleMikeyDriver    2.3.5fc10
com.apple.iokit.IOUserEthernet    1.0.0d1
com.apple.Dont_Steal_Mac_OS_X    7.0.0
com.apple.driver.ApplePolicyControl    3.2.13
com.apple.driver.AppleSMCLMU    2.0.3d0
com.apple.driver.AppleUpstreamUserClient    3.5.10
com.apple.driver.AppleBacklight    170.2.5
com.apple.driver.AppleMCCSControl    1.1.11
com.apple.driver.AppleIntelHD4000Graphics    8.0.6
com.apple.driver.AppleIntelFramebufferCapri    8.0.6
com.apple.driver.AppleUSBTCButtons    237.1
com.apple.driver.AppleUSBCardReader    3.1.7
com.apple.driver.AppleUSBTCKeyboard    237.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
com.apple.BootCache    34
com.apple.driver.XsanFilter    404
com.apple.iokit.IOAHCIBlockStorage    2.3.1
com.apple.driver.AppleUSBHub    5.5.0
com.apple.driver.AirPort.Brcm4331    612.20.14
com.apple.driver.AppleUSBXHCI    1.5.1
com.apple.driver.AppleAHCIPort    2.5.1
com.apple.driver.AppleUSBEHCI    5.5.0
com.apple.driver.AppleEFINVRAM    1.7
com.apple.driver.AppleSmartBatteryManager    161.0.0
com.apple.driver.AppleRTC    1.5
com.apple.driver.AppleACPIButtons    1.7
com.apple.driver.AppleHPET    1.8
com.apple.driver.AppleSMBIOS    1.9
com.apple.driver.AppleACPIEC    1.7
com.apple.driver.AppleAPIC    1.6
com.apple.driver.AppleIntelCPUPowerManagementClient    196.0.0
com.apple.nke.applicationfirewall    4.0.39
com.apple.security.quarantine    2
com.apple.driver.AppleIntelCPUPowerManagement    196.0.0
com.apple.kext.triggers    1.0
com.apple.iokit.IOSerialFamily    10.0.6
com.apple.driver.DspFuncLib    2.3.5fc10
com.apple.driver.X86PlatformPlugin    1.0.0
com.apple.driver.IOPlatformPluginFamily    5.3.0d47
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport    4.1.2f9
com.apple.iokit.IOAudioFamily    1.8.9fc11
com.apple.kext.OSvKernDSPLib    1.6
com.apple.iokit.IOSurface    86.0.3
com.apple.iokit.IOBluetoothFamily    4.1.2f9
com.apple.driver.AppleGraphicsControl    3.2.13
com.apple.driver.AppleSMC    3.1.4d2
com.apple.driver.AppleHDAController    2.3.5fc10
com.apple.iokit.IOHDAFamily    2.3.5fc10
com.apple.driver.AppleSMBusPCI    1.0.11d0
com.apple.driver.AppleBacklightExpert    1.0.4
com.apple.driver.AppleSMBusController    1.0.11d0
com.apple.iokit.IONDRVSupport    2.3.6
com.apple.iokit.IOGraphicsFamily    2.3.6
com.apple.iokit.IOSCSIBlockCommandsDevice    3.5.5
com.apple.iokit.IOUSBMassStorageClass    3.5.1
com.apple.iokit.IOSCSIArchitectureModelFamily    3.5.5
com.apple.driver.AppleUSBMultitouch    237.3
com.apple.iokit.IOUSBHIDDriver    5.2.5
com.apple.driver.AppleThunderboltDPInAdapter    1.8.9
com.apple.driver.AppleThunderboltDPAdapterFamily    1.8.9
com.apple.driver.AppleThunderboltPCIDownAdapter    1.2.6
com.apple.driver.AppleUSBMergeNub    5.5.0
com.apple.driver.AppleUSBComposite    5.2.5
com.apple.driver.AppleThunderboltNHI    1.6.3
com.apple.iokit.IOThunderboltFamily    2.1.8
com.apple.iokit.IOUSBUserClient    5.5.0
com.apple.iokit.IO80211Family    510.4
com.apple.iokit.IONetworkingFamily    3.0
com.apple.iokit.IOAHCIFamily    2.3.1
com.apple.iokit.IOUSBFamily    5.5.0
com.apple.driver.AppleEFIRuntime    1.7
com.apple.iokit.IOHIDFamily    1.8.1
com.apple.iokit.IOSMBusFamily    1.1
com.apple.security.sandbox    220
com.apple.kext.AppleMatch    1.0.0d1
com.apple.security.TMSafetyNet    7
com.apple.driver.DiskImages    344
com.apple.iokit.IOStorageFamily    1.8
com.apple.driver.AppleKeyStore    28.21
com.apple.driver.AppleACPIPlatform    1.7
com.apple.iokit.IOPCIFamily    2.7.3
com.apple.iokit.IOACPIFamily    1.4
com.apple.kec.corecrypto    1.0

Any or all of the following third-party system modifications may be contributing to your problem:
Rapport
Telestream audio driver
If the panic is recurrent, I suggest you uninstall them, one at a time, according to the developers' instructions, to see whether you can identify which one is at fault. A conflict between modifications may be involved. Reboot and test after each uninstallation.
Uninstalling Rapport
Back up all data before making any changes.

My Power Mac G5 is freezing up. A few days ago my G5 started freezing up, the cursor is unresponsive and none of the keys have any use. I have to press the power button to shut down and then restart. Sometimes on the restart, instead of the Apple logo I g

A few days ago my G5 started to freeze up while in use. It doesn't matter if in Safari, iTunes, Pages, etc. The cursor will not respond nor does any keystroke, force quit, escape, etc. I have to hold the power button down to shut the computer down. Then, try to restart. Sometimes restart will work and the computer will work for a while and then freeze again. Other times on restart, instead of the Apple logo at start up, I get a Zero with a line thru it, have to power off and restart again. When it does restart, the "spinning gear" takes a lot longer than normal to spin up and take me to the login screen. Have been told it may be my hard drive getting ready to fail. Have looked at disk utilities, S.M.A.R.T looks fine, "verified" and have verified disk, and repaired permissions. In case it is the hard drive, I bought external hard drive and hooked it up to Time Machine. The backing up to a long time, overnight, about 10 hours because it kept freexing up and I would have to shut down and try restarting again. Finally got everything backed up.
Any help or suggestions greatly appreciated!!! Could it be my hard drive is dying? Is the the normal chain of events or is it something else???

Ok, to copy the Drive from one to another, get carbon copy cloner to make an exact copy of your old HD to the New one...
http://www.bombich.com/software/ccc.html
Or SuperDuper...
http://www.shirt-pocket.com/SuperDuper/
Believe it or not, anything on the Desktop uses 3 times the Resources of the Mac than if stored elsewhere, I can note a slowdown from just 30 items on the Desktop on a really fast Mac, so the less the better on the Desktop.
DW will not tell you about Bad Sectors, it's just the very best at Repair Directory damage & such.
At this point I think you should get Applejack...
http://www.macupdate.com/info.php/id/15667/applejack
After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 6 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 6 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
Trash old Log files.
First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files! :-)
Disconnect the USB cable from any Uninterruptible Power Supply so the system doesn't shut down in the middle of the process.

Exchange ActiveSync has shut down because an unexpected critical error occurred

Hi,
At one point all phones stopped syncing and when checking event log i came to this error:
Exchange ActiveSync has shut down because an unexpected critical error occurred.
URL=
--- Exception start ---
Exception type: System.OutOfMemoryException
Exception message: Insufficient memory to continue the execution of the program.
Exception level: 0
Exception stack trace: at Microsoft.Exchange.Data.Storage.GenericListData`2.DeserializeData(BinaryReader reader, ComponentDataPool componentDataPool)
at Microsoft.Exchange.AirSync.DeviceBehaviorData.DeserializeData(BinaryReader reader, ComponentDataPool componentDataPool)
at Microsoft.Exchange.Data.Storage.DerivedData`1.DeserializeData(BinaryReader reader, ComponentDataPool componentDataPool)
at Microsoft.Exchange.Data.Storage.GenericListData`1.DeserializeData(BinaryReader reader, ComponentDataPool componentDataPool)
at Microsoft.Exchange.Data.Storage.GenericDictionaryData`3.DeserializeData(BinaryReader reader, ComponentDataPool componentDataPool)
at Microsoft.Exchange.Data.Storage.SyncState.DeserializeSyncStateTable(Int64 idxTable)
at Microsoft.Exchange.Data.Storage.SyncState.Deserialize(PropertyDefinition property)
at Microsoft.Exchange.Data.Storage.SyncState.Load(Boolean reloadFromBackend, PropertyDefinition[] additionalPropsToLoad)
at Microsoft.Exchange.Data.Storage.SyncState..ctor(SyncStateStorage syncStateStorage, StoreObject storeObject, SyncStateInfo syncStateInfo, Boolean syncStateIsNew)
at Microsoft.Exchange.Data.Storage.CustomSyncState.GetSyncState(SyncStateStorage syncStateStorage, Folder syncStateParentFolder, SyncStateInfo syncStateInfo, StoreObjectId storeObjectId)
at Microsoft.Exchange.Data.Storage.SyncStateStorage.GetCustomSyncState(SyncStateInfo syncStateInfo)
at Microsoft.Exchange.AirSync.GlobalInfo.LoadFromMailbox(MailboxSession mailboxSession, SyncStateStorage syncStateStorage, ProtocolLogger protocolLogger)
at Microsoft.Exchange.AirSync.Command.OpenSyncStorage(Boolean shouldOpenGlobalSyncState, Boolean shouldUseBudget)
at Microsoft.Exchange.AirSync.Command.WorkerThread()
--- Exception end ---
mail server has 35GBs of Ram, plenty of disk space, no extra transaction logs adding or anything like that. Right now phones work, but every other minute that error pops up and after sometime event 1013 is logged saying that Exchange activesync has been
loaded.
Thanks

Hi Luksharp
Is it happening only for Iphones or is it for all types of phones as well ?
What version of Exchange server you are running ?
Are you experiencing this issue after any recent upgrade or changes in CAS server ?
Just check the sync state policy refer below article
http://blog.chrislehr.com/2012/02/difference-in-policy-versions.html
Looks like Sync State Policy is loaded for user's mailbox from latest version of CAS server and it was contacted the lower version of CAS for mailbox access.
Just ensure all of your CAS servers are up to date with all mailbox and hub in correct versions.
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com

Runtime service is shutting down

Hi,
I used the stop_service script to shuw down the rtp but it seems it doesn't work correct. I always receive "available" as result. If I try to start a mapping I receive rtc-5006 ora-20006 the request cannot be queued because the platform service is closing down. start_service.sql brings an error in the owb log files runtime service is already running. A database restart will probably solve my problems, but i am not allowed to do so. Any ideas?
Regards,
Torsten

Okay, I killed the "wait" process of the runtime repository owner, started the service again and now everything is fine (or better it seems so).
Regards,
Torsten

The Cluster service is shutting down because quorum was lost

Similar Messages

Maybe you are looking for