The cluster service terminated, error 7024, cannot create a file when that file already exists
I have a test 2-node Failover cluster using Server 2012 R2
As of last night the cluster service on one of the 2 nodes is down with this error:
The Cluster Service service terminated with the following service-specific error:
Cannot create a file when that file already exists.
EventID 7024
The Cluster service waits 60 sec, tries to start, and the same error occurs again.
Any idea where to look to identify which file this error is referring to, or how to go about identifying root cause and getting a solution?
thank you.
samb
Hi Yeswanth
Then you can try with a "Add Counter". This will create new file each time with the same name but a counter will be added to the file name at the end specifying the number of times it is created.
You can also the specify the format to create the counter once select this option u can correspondingly fill the Format and step fields.
Will this be fine.
Regards
Ashmi
Similar Messages
-
LMS 3.2 - Backup-Error -- ERROR(908): Cannot create or back up tar file
Hello again,
with performing backup (LMS 3.2 on Solaris 9) the following errors will arise.
dbbackup.log
/opt/CSCOpx/bin/tar: Removing leading `/' from absolute path names in the archive Apps file : /opt/CSCOpx/backup/manifest/upm/upminfo/datafiles.txt
[Tue Dec 8 08:56:54 2009] Archiving the contents of the following directories into /enbw/backup/files/cw_db_backup/0/upm/filebackup.tar
[Tue Dec 8 08:56:54 2009] /opt/CSCOpx/hum/conf/upm-snmp.properties
/opt/CSCOpx/hum/thresholdscript /opt/CSCOpx/MDC/tomcat/webapps/upm/reports
/opt/CSCOpx/MDC/tomcat/webapps/upm/WEB-INF/classes/com/cisco/nm/upm/properti
es/common/UPM.properties
/opt/CSCOpx/bin/tar: Removing leading `/' from absolute path names in the archive
/opt/CSCOpx/bin/tar: Cannot add file
/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/virt32841308_657_658_-718594975:
No such file or directory
/opt/CSCOpx/bin/tar: Cannot add file
/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/virt32841308_658_659_1465769167:
No such file or directory
/opt/CSCOpx/bin/tar: Error exit delayed from previous errors [Tue Dec 8 09:07:30 2009] ERROR(908): Cannot create or back up tar file. Backup cancelled. Verify that you have write-access to this directory. [Tue Dec 8 09:07:30 2009] Backup failed: 2009/12/08 09:07:40 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Is seems to be problem related to maximal filesize handling of GNUtar implemented in CW2000.
The problem is with tar'ing HUM-Reports in /opt/CSCOpx/MDC/tomcat/webapps/upm/reports, and with reaching
tarfile-size of 2,9GByte error is thrown.
</exxx/backup/files/cw_db_backup/0/upm># ls -lh
total 6126448
-rw-r----- 1 casuser casusers 2.9G Dec 8 09:07 filebackup.tar
</exxx/backup/files/cw_db_backup/0/upm># ls -al
total 6126452
drwxr-x--- 2 casuser casusers 512 Dec 7 14:30 .
drwxr-x--- 11 casuser casusers 512 Dec 7 14:30 ..
-rw-r----- 1 casuser casusers 3135201280 Dec 8 09:07 filebackup.tar
GNUtar-Version
# /opt/CSCOpx/bin/tar --version
tar (GNU tar) 1.13
Copyright (C) 1988, 92,93,94,95,96,97,98, 1999 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
Written by John Gilmore and Jay Fenlason.
Is this a know problem?
Thanks for any thoughts.
Best Regards
LotharHi Joe,
thanks for your feedback.
These files to be tarred aren't there directly after backup stops with error.
It seems that some process stores data about reports in that file and when trying to
pack these reports via tar they are delete by any cleanup method.
Does this help.
P.S. Backup usually takes about more than 1hour -
Cannot create a file when that file already exists, but should overwrite
Hi,
I need the same file name which is at Sender side and when it reaches to Receiver directory without timestamp.
for eg., Sender side : Yeswanth.txt
and also receiver side : Yeswanth.txt
but, here it should overwrite the existing file (because, the sender side file name is always constant) at receiver directory when the job schedules for each time.
Processing parameters i has given on Receiver side:
File Construction Mode : Create
put file : Use Temporary File
and I enabled the Adapter Specific Message Attributes at Sender side and Receiver side.
Error getting receiver side at communication channel :
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException:
Yeswanth.txt: Cannot create a file when that file already exists. : com.sap.aii.adapter.file.ftp.FTPEx: 550
Yeswanth.txt: Cannot create a file when that file already exists.
Reward points for useful answers.
Regards,
Yeswanth.
Edited by: YeswanthRaj Kumar on May 23, 2008 8:20 AMHi Yeswanth
Then you can try with a "Add Counter". This will create new file each time with the same name but a counter will be added to the file name at the end specifying the number of times it is created.
You can also the specify the format to create the counter once select this option u can correspondingly fill the Format and step fields.
Will this be fine.
Regards
Ashmi -
FTPEx: 550 : Cannot create a file when that file already exists.
Hi experts,
I am working on idoc to file scenario and PI 7.1. The idoc is split into 3 files.
In sxmb_moni , the message is successful , but in rwb( Message montoring) i am geeting the fllowing Error message.
' Delivering the message to the application using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: An error occurred while connecting to the FTP server '172.19.125.190:21'. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 550 /Storedata/Outbound/0000001802: Cannot create a file when that file already exists. '. For details, contact your FTP server vendor..'
and this error message is not displayed for all the target files , some files are getting created succesfully.
After some times , the file in error status , gets created automatically.
What may be the reason.?
Thanks in advance .
Best Regards,
AnilThere seem to be already some files in your Target Directory with the same name as your new files (which the CC is trying to place) and the CC is not able to overwrite the existing files and hence the error...check this.
Check: http://help.sap.com/saphelp_nwpi71/helpdata/EN/44/69d7cfa4b633eae10000000a1553f6/content.htm
14. Select the File Construction Mode.
u25CB Create
The file is created. The document received last is saved in each case.
If you want the created file to be overwritten, select Overwrite Existing File. If you do not set the indicator, processing is stopped until the created file is processed.
You can only set the indicator if you select Use Temporary File under Put File below.
Regards,
Abhishek.
Edited by: abhishek salvi on Jul 28, 2009 6:59 PM -
Cannot rename DC, "Cannot create a file when that file already exists."
Hi,
A long time ago we used a domain controller named jacob.mydomain.lan. It was removed, possibly in a 'dirty' way, and now we cannot re-use that name for another domain controller. In the meantime we have upgraded to Win 2012 domain controllers
now, and when I enter this to rename:
netdom computername ourdc.mydomain.lan /add:jacob.mydomain.lan
I get the error: "Unable to add jacob.mydomain.lan as an alternate name for the computer. The error is: Cannot create a file when that file already exists."
If I enter:
netdom computername ourdc.mydomain.lan /remove:jacob.mydomain.lan
I get: "The command completed successfully", but it still refuses to add jacob.mydomain.lan
After each attempt to add a forward zone dns record 'jacob.ourdomain.lan' has been created. I always erase this manually afterwards.
What is the problem? How can I search to find the offending 'file' named 'jacob'?
Thanks a lot for help on this.
regards TorKevin,
I suggest you wait 30 days instead of 3 days before you enthusiastically close threads. Some people might think you are being a jerk if you don't.
"K_evin Zhu" wrote in message
news:[email protected]...
Hi,
As this thread has been quiet for a while, we will mark it as �??Answered�?? as the information provided should be helpful. If you need further help, please feel free to reply this post directly so we will be notified to follow it up. You can also choose to
unmark the answer as you wish.
BTW, we�??d love to hear your feedback about the solution. By sharing your experience you can help other community members facing similar problems. Thanks for your understanding and efforts.
Best Regards
Kevin
Tomás Mason -
Cannot create a file when that file already exists
When i try to use Photoshop filters: Adaptive Wide Angle, Shake Reduction and Liquify. An error pop up saying "Cannot create a file when that file already exists".
Just one detail: The liquify filter doen't pop up the error right away, the error occurs just after i press the "ok" button to accept the changes.
I have already tryed to Reset the preferences, tryed to reinstall the PS, Update the PS, download (and install) the latests drivers to my pc.
My Pc fit in all the requirements, have the openGL version: 3.0
I also have Photoshop CS5 installed, in which the liquify filter works perfectly.
Here i have two Print Screen, how it looks:
The first image is just right before a click the "Adaptive Wide Angle"
The second one is right after i clicked it
If you could help me, i already thank you for wasting you time reading this!Resetting the Photoshop preferences does not reset the preferences for the plugins.
There should be a Plugins folder. If the folder cannot be created it would cause the error you are seeing.
Can you check the permissions on the ‘Adobe’ folder at: C:\Users\jworthin\AppData\Roaming\Adobe.
Can you manually create a Plugins folder in that location or do you get an error? -
I was trying to find a file (iTunes Backup). When using finder/Spotlight they couldn't find the file.
I then opened up my timecapsule and searched for the file....tick-a-de-da it found it in yesterdays backup. I attempted to restore the file and got the prompt "A file with that name already exists in this location, would you like to keep both, replace the file or cancel the request.
So if the file is there why can't spotlight/finder find the file??
If it helps I get this from the terminal when checking if indexing was enabled.
$ mdutil -s -a
Indexing enabled.
/Volumes/Data:
2014-11-18 18:09:39.542 mdutil[1472:572531] Metadata.framework [Error]: mdsCopyStoreAttributes failed: (8) (os/kern) no access
No index.
/Volumes/Time Machine Backups:
Indexing and searching disabled.
/Volumes/Time Machine Backups/Backups.backupdb:
Indexing enabled.Hi Danielle,
Is there any possibilty that some of your files (a VI or DLL?) have been moved, renamed, or deleted? Also, what version of LabVIEW are you using and are you using any .NET DLLs? Another option to consider would involve VISA or DAQmx property nodes. Are you using any of these property nodes in your code? Here is a KnowledgeBase article to describe more about the VISA and DAQmx property nodes in a source distribution:
Error Creating Source Distributions Involving rc Files: http://digital.ni.com/public.nsf/allkb/833BFD5E9CA0224886257584004DAA4C?OpenDocument
I hope this is able to help.
Anna L
Applications Engineer
National Instruments -
Event 7024 The DPMRA service terminated with the following service-specific error:
Hi
I am getting a DPMRA error on an Exchange 2013 Server.
Event 7024, Service Control Manager
The DPMRA service terminated with the following service-specific error:
An attempt was made to access a socket in a way forbidden by its access permissions.
I think I have fixed the issue by uninstalling the DPM Agent and reinstalling it. It now needs a restart (I will do this after hours)
Is there a better way of fixing an issue like this?Hi
Something has probably changed on the protected server side that affects the DPM agent. In some cases the DCOM configuration could change. Look at this blogpost and verify your DPMRA DCOM object.
http://robertanddpm.blogspot.com/2010/08/dpm-ra-rights.html
If this doesn't do the trick try reinstall the agent.
Best Regards
Robert Hedblom
MVP DPM
Check out my DPM blog @ http://robertanddpm.blogspot.com -
I am experiencing this error with one of our cluster environment. Can anyone help me in this issue.
The Cluster Service function call 'ClusterResourceControl' failed with error code '1008(An attempt was made to reference a token that does not exist.)' while verifying the file path. Verify that your failover cluster is configured properly.
Thanks,
Venu S.
Venugopal S ----------------------------------------------------------- Please click the Mark as Answer button if a post solves your problem!Hi Venu S,
Based on my research, you might encounter a known issue, please try the hotfix in this KB:
http://support.microsoft.com/kb/928385
Meanwhile since there is less information about this issue, before further investigation, please provide us the following information:
The version of Windows Server you are using
The result of SELECT @@VERSION
The scenario when you get this error
If anything is unclear, please let me know.
Regards,
Tom Li -
Dear Technet,
Windows could not start the Cluster Service on Local computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code 2.
My cluster suddenly went disappear. and tried to restart the cluster service. When trying to restart service this above mention error comes up.
even i tried to remove the cluster through power-shell still couldn't happen because of cluster service not running.
Help me please.. thank you.
Regards
ShamilHi,
Could you confirm which account when you start the cluster service? The Cluster service is a service that requires a domain user account.
The server cluster Setup program changes the local security policy for this account by granting a set of user rights to the account. Additionally, this account is made a member
of the local Administrators group.
If one or more of these user rights are missing, the Cluster service may stop immediately during startup or later, depending on when the Cluster service requires the particular
user right.
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
One of my exchange 2010 servers dpm agent is give the following error when the dpmra service attempts to start.
The DPMRA service terminated with service-specific error Only one usage of each socket address (protocol/network address/port) is normally permitted..
I have tried uninstalling/reinstalling the agent but this does not resolve the issue
Any help would be greatly appreciated.
Thanks
William HicksonHi
Something has probably changed on the protected server side that affects the DPM agent. In some cases the DCOM configuration could change. Look at this blogpost and verify your DPMRA DCOM object.
http://robertanddpm.blogspot.com/2010/08/dpm-ra-rights.html
If this doesn't do the trick try reinstall the agent.
Best Regards
Robert Hedblom
MVP DPM
Check out my DPM blog @ http://robertanddpm.blogspot.com -
Got this error after a reboot for the monthly MS hotfixes. After messing around too much, I finally found the problem and though that I would document it here since I have not found the solution anywhere I looked.
This is in a Remote Desktop setup of two RDCB using a SQL DB that is hosted on a third server. The Remote Desktop Management service would fail to start with the "The Remote Desktop Management service terminated with the following service-specific
error: %%4294967295" error because the SQL Server service hosting the database was offline. It had not automatically restarted after the same hotfixes. So I started the SQL server, then was able to get Remote Desktop Management to start on my RDCB without
any delay.
Philippe CarignanHi Philippe,
How is everything going on?
Please check below thread for information.
Remote Desktop Management Service, Service-specific
error %%2284126209
Hope it helps!
Thanks,
Dharmesh -
The OracleOraHome_ApacheASControl service terminated at Startup
Hi friends
I have a local installation of Apex 2.2 that I downloaded from the web. I completed the installation successfully.
I had set off the Startup of the Service in the Administration Tools - Component Services to Manual
When I start the service OracleOraHome_ApacheASControl, it gives me the error
The OracleOraHome_ApacheASControl service terminated with service-specific error 2 (0x2). For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
The Microsoft site tells me
Details
Product: Windows Operating System
Event ID: 7024
Source: Service Control Manager
Version: 5.0
Component: System Event Log
Symbolic Name: EVENT_SERVICE_EXIT_FAILED_SPECIFIC
Message: The %1 service terminated with service-specific error %2.
Explanation
The specified service stopped unexpectedly with the error indicated in the message. Windows does not recognize the service's error code.
User Action
To display the service-specific error code in the Service_Exit_Code field, at the command line, type
sc query service name
The information displayed might help you troubleshoot why the error occurred.
Version: 5.2
Symbolic Name: EVENT_SERVICE_EXIT_FAILED_SPECIFIC
Message: The %1 service terminated with service-specific error %2.
Explanation
The specified service stopped unexpectedly with the error indicated in the message. Windows does not recognize the service's error code.
User Action
To display the service-specific error code in the Service_Exit_Code field, at the command line, type
sc query service name
The information displayed might help you troubleshoot why the error occurred.
Currently there are no Microsoft Knowledge Base articles available for this specific error or event message. For information about other support options you can use to find answers online, see http://support.microsoft.com/default.aspx.
If any of you have faced this problem earlier and have some resolution to it, I would be mighty glad for the help
Thanks in advance
LaxmiHi Laxmi,
The ASControl service is opmn. Opmn (Oracle Process Manager Notifier - I think), is like the main service that starts all other services in the Oracle HTTP Server world (depending on what you have installed). You do not need opmn started to run APEX, just the HTTP Server.
If you really want to know what might be going wrong with opmn, then i would issue the following from the command line
opmnctl startall
You should see one of the processes fail and it will inform you. You can then check in <ORACLE_HTTP_SERVER_HOME>/opmn/logs/<process name> to see why it failed.
At the end of the day, something cannot be started from opmn and really this is not an APEX issue.
NOTE : TO see the status of the process's you can issue 'opmnctl status' -
The DPMRA service terminated unexpectedly. It has done this 332 time(s)."
Hi,
We’ve been having problems with our DPM backups. We’re running DPM 2012 SP1 on Server 2008 R2 SP1.
In short the backup agent seems to crash causing all jobs to error/fail.
I slightly more detailed explanation of the issue is ….
The critical alert says
“The protection agent on MYSERVERNAME was temporarily unable to respond because it was in an unexpected state. (ID 60 Details: Internal error code: 0x809909B0)”
When we look at the System log we have an event id 7034 from the Service Control Manager source with something like
“The DPMRA service terminated unexpectedly.
It has done this 332 time(s).”
In the Application log we have event id 1000 from the Application Error source
Faulting application name: DPMRA.exe, version: 4.1.3333.0, time stamp: 0x50f5e4f5
Faulting module name: FileWriterHelperPlugin.dll, version: 4.1.3313.0, time stamp: 0x50ad994d
Exception code: 0xc0000005
Fault offset: 0x0000000000062a09
Faulting process id: 0x1a94
Faulting application start time: 0x01ce5636b3b19038
Faulting application path: C:\Program Files\Microsoft DPM\DPM\bin\DPMRA.exe
Faulting module path: C:\Program Files\Microsoft DPM\DPM\bin\FileWriterHelperPlugin.dll
Report Id: e814c3af-c22a-11e2-a2b8-826b64169df1
After looking in the DPMRACurr.errlog I found a “CRITICAL Raising Watson for process” but can’t track down the issue ….
1A94 2320
05/21 15:27:08.284
31
vsssnapshotrequestor.cpp(712)
[0000000002EB93B0]
NORMAL
CVssSnapshotRequestor::StartDoSnapshot [0000000002EB93B0]
1A94 2320
05/21 15:27:10.312
31
vssbaserequestor.cpp(944)
[0000000002EB93B0]
NORMAL
QueryStatus returned 0x4230a, Releasing VssAsync [0000000000BE7030]
1A94 2320
05/21 15:27:10.312
31
vssbaserequestor.cpp(1068)
[0000000002EB93B0]
NORMAL
CVssBaseRequestor::StartGatherWriterStatus [0000000002EB93B0]
1A94 2320
05/21 15:27:11.326
31
vssbaserequestor.cpp(944)
[0000000002EB93B0]
NORMAL
QueryStatus returned 0x4230a, Releasing VssAsync [0000000000BE7030]
1A94 2320
05/21 15:27:11.326
31
vsssnapshotrequestor.cpp(747)
[0000000002EB93B0]
NORMAL
CVssSnapshotRequestor::MapVolumesToSnapshotPaths [0000000002EB93B0]
1A94 2320
05/21 15:27:11.342
31
vsssnapshotrequestor.cpp(767)
[0000000002EB93B0]
NORMAL
CVssSnapshotRequestor:: ProviderId:[{B5946137-7B9F-4925-AF80-51ABD60B20D5}], h/w provider:[0], volume:[\\?\Volume{7d4bcb2f-275e-11e0-afde-c2fd68da2b37}\]
1A94 2320
05/21 15:27:11.498
31
vssbaserequestor.cpp(1101)
[0000000002EB93B0]
NORMAL
CVssBaseRequestor::CheckWriterStatus [0000000002EB93B0]
1A94 2320
05/21 15:27:11.498
31
vssbaserequestor.cpp(1132)
[0000000002EB93B0]
NORMAL
Checking Writer status for writerid: {0074A271-4F24-43E0-9EC7-28A44189CB80}
writerName: DPM Writer
1A94 05F0
05/21 15:27:11.701
18
incompatiblefiltersfinder.cpp(171)
150ACB1B-1308-494F-8145-D1BBC50308EA NORMAL
No Incompatible Service Groups. Hence no incompatible filters
1A94 05F0
05/21 15:27:11.701
31
basewriterbackuphelper.cpp(178)
[0000000002FF9150]
150ACB1B-1308-494F-8145-D1BBC50308EA NORMAL
SetSystemFlags(0)
1A94 05F0
05/21 15:27:11.701
18
dsmsendersubtaskbase.cpp(47)
[0000000002EE0FB0]
150ACB1B-1308-494F-8145-D1BBC50308EA NORMAL
CDsmSenderSubTaskBase: constructor [0000000002EE0FB0] openovl[0000000002EE1120] msgovl[0000000002EE1220] closeovl[0000000002EE1170]
1A94 05F0
05/21 15:27:11.701
31
vsssnapshotrequestor.cpp(1276)
150ACB1B-1308-494F-8145-D1BBC50308EA NORMAL
ssLocalVolumeGuid = [\\?\Volume{7d4bcb2f-275e-11e0-afde-c2fd68da2b37}\], ssClusterVolGuid=[\\?\Volume{7d4bcb2f-275e-11e0-afde-c2fd68da2b37}\]
1A94 05F0
05/21 15:27:11.701
31
basewriterbackuphelper.cpp(370)
150ACB1B-1308-494F-8145-D1BBC50308EA WARNING
Assertion Failure :: false
1A94 05F0
05/21 15:27:11.701
31
basewriterbackuphelper.cpp(317)
150ACB1B-1308-494F-8145-D1BBC50308EA WARNING
Assertion Failure :: pConfigureInfo != NULL
1A94 05F0
05/21 15:27:11.701
22
watsonintegration.cpp(73)
150ACB1B-1308-494F-8145-D1BBC50308EA NORMAL
Inside Watson Handler
1A94 05F0
05/21 15:27:11.701
22
watsonintegration.cpp(116)
150ACB1B-1308-494F-8145-D1BBC50308EA CRITICAL
Raising Watson for process
299C 2860
05/21 15:28:03.736
03
timer.cpp(490)
ACTIVITY
CTimerMgr::TimerThread
299C 2860
05/21 15:28:03.736
03
timer.cpp(503) [0000000000449D50]
ACTIVITY
CTimerMgr::TimerThreadInternal
299C 2728
05/21 15:28:03.741
03
runtime.cpp(782)
[000000000044D3F0]
ACTIVITY
InitializeSecurity found 3 authorized entities
299C 2728
05/21 15:28:03.742
03
runtime.cpp(841)
[000000000044D3F0]
ACTIVITY
InitializeSecurity added COM perm for DPMRADCOMTrustedMachines
299C 2728
05/21 15:28:03.742
03
runtime.cpp(841)
[000000000044D3F0]
ACTIVITY
InitializeSecurity added COM perm for DPMRATrustedDPMRAs
299C 2728
05/21 15:28:03.743
03
runtime.cpp(848)
[000000000044D3F0]
ACTIVITY
InitializeSecurity added DM perm for DPMRADmTrustedMachines
299C 2728
05/21 15:28:03.743
03
runtime.cpp(94)
NORMAL
Found 1 writer account(s) under VSS access control.
299C 2728
05/21 15:28:03.743
03
runtime.cpp(162)
NORMAL
Added writer account [0] 'NT Authority\NetworkService' to the DACL.
299C 2728
05/21 15:28:03.749
22
genericthreadpool.cpp(824)
[000000000044D3F0]
NORMAL
Hr: = [0x80070002] CGenericThreadPool::m_dwMaximumNumberOfThreads[20]
299C 2728
05/21 15:28:03.758
20
commengine.cpp(345) [00000000004C4650]
ACTIVITY
Hr: = [0x00000000] ConnectionNoActivityTimeout: 7200
299C 2728
05/21 15:28:03.759
20
commengine.cpp(359) [00000000004C4650]
ACTIVITY
Hr: = [0x00000000] m_dwConnectionNoActivityTimeoutForSlowReceiver: 7200
299C 2BE4
05/21 15:28:03.764
03
timer.cpp(490)
ACTIVITY
CTimerMgr::TimerThread
299C 2BE4
05/21 15:28:03.764
03
timer.cpp(503) [000000000021FA58]
ACTIVITY
CTimerMgr::TimerThreadInternal
299C 2728
05/21 15:28:03.765
29
dpmra.cpp(160)
[0000000000448CB0]
NORMAL
CDPMRA::Initialize [0000000000448CB0]
299C 2728
05/21 15:28:03.765
31
vaagent.cpp(227)
NORMAL
CVAAgent: Initialize globals
299C 2728
05/21 15:28:03.777
29
mta.cpp(126)
ACTIVITY
CMTA::AddSchemasToSchemaCache => Initialize loaded schemas
299C 2728
05/21 15:28:03.791
29
dpmra.cpp(178)
[0000000000448CB0]
NORMAL
CDPMRA::Initialize loaded schemas
299C 2728
05/21 15:28:03.791
22
genericthreadpool.cpp(75)
[000000000021FD90]
NORMAL
CGenericThreadPool: constructor
299C 2728
05/21 15:28:03.791
22
genericthreadpool.cpp(824)
[000000000021FD90]
NORMAL
Hr: = [0x80070002] CGenericThreadPool::m_dwMaximumNumberOfThreads[256]
299C 2728
05/21 15:28:03.792
29
dpmra.cpp(265)
[0000000000448CB0]
NORMAL
CreateDefaultSubTask [0000000000448CB0]
299C 2728
05/21 15:28:03.792
29
dpmra.cpp(188)
[0000000000448CB0]
NORMAL
Temporary storage path reg key found
299C 2728
05/21 15:28:03.792
29
dpmra.cpp(204)
[0000000000448CB0]
NORMAL
MTA Temp location Path = [c:\Program Files\Microsoft DPM\DPM\temp\MTA\]
299C 2728
05/21 15:28:03.792
29
mta.cpp(209)
NORMAL
Hr: = [0x80070005] CMTA::Initialize => Could not delete file = [c:\Program Files\Microsoft DPM\DPM\temp\MTA\PSInfo]
299C 2728
05/21 15:28:03.793
29
mtamethrottlehelper.cpp(113) [00000000029987E0]
NORMAL
Hr: = [0x80070002] Number of encryption threads = [2]
299C 2728
05/21 15:28:03.793
03
datasourceresourcelimit.cpp(132)
[000000000044D9F0]
NORMAL
Resource Limit Config File: c:\Program Files\Microsoft DPM\DPM\bin\DsResourceLimits.xml
299C 2728
05/21 15:28:03.794
03
datasourceresourcelimit.cpp(138)
[000000000044D9F0]
NORMAL
Loaded DS Resource Limits
299C 2728
05/21 15:28:03.794
03
service.cpp(298)
[00000000000FFD80]
ACTIVITY
CService::AnnounceServiceStatus
299C 0758
05/21 15:28:03.827
03
runtime.cpp(1376)
[000000000044D3F0]
150ACB1B-1308-494F-8145-D1BBC50308EA FATAL
Subtask failure, sending status response XML=[<?xml version="1.0"?>
We’ve since raised a ticket with Microsoft Support but I’m told the System Centre Developer support team are experiencing high call volumes so I’m hoping someone else might be able to point me in the right direction.
We do have a SCOM agent installed but have disabled it and still get the issue :o(
Any ideas of what else to look at?
Thanks,
JohnDid you ever receive an answer back on this? I have almost the exact same issue. I have DPM 2012 Sp1 Update Roll up 5 on Server 2012. Backup jobs will work on a particular server for a couple after forcing synchronization but then all jobs begin to fail.
On the DPM Server I will get: The protection agent on server.domain.local was temporarily unable to respond because it was in an unexpected state. (ID: 60) On the Protected computer in the Event Viewer system log I get: Service Control Manager Event ID: 7034
Description: The DPMRA service terminated unexpectedly. It has done this 688+ time(s).
On the Protected computer under C:\Program Files\Microsoft Data Protection Manager\DPM\Temp I have quite a few error crash logs. Here are some of them.
1318 0C14 03/17 15:47:04.123 03 runtime.cpp(1376)
[008E7060] 60111D39-34B2-4135-BAC2-7AC4368141A3 FATAL Subtask failure, sending status response XML=[<?xml version="1.0"?>
1318 0C14 03/17 15:47:04.123 03 runtime.cpp(1376)
[008E7060] 60111D39-34B2-4135-BAC2-7AC4368141A3 FATAL <Status xmlns="http://schemas.microsoft.com/2003/dls/StatusMessages.xsd" StatusCode="-2137454160" Reason="Error" CommandID="RACancelAllSubTasks"
CommandInstanceID="23976afc-34bc-4d3c-99ea-996bdb34ce99" GuidWorkItem="97a32e51-07f8-4bb2-a292-dcd433b2472b" TETaskInstanceID="60111d39-34b2-4135-bac2-7ac4368141a3"><ErrorInfo xmlns="http://schemas.microsoft.com/2003/dls/GenericAgentStatus.xsd" ErrorCode="536872913"
DetailedCode="-2137454160" DetailedSource="2"><Parameter Name="AgentTargetServer" Value="bspops001.BSPEnterprise.local"/></ErrorInfo></Status>
1318 0C14 03/17 15:47:04.123 03 runtime.cpp(1376)
[008E7060] 60111D39-34B2-4135-BAC2-7AC4368141A3 FATAL ]
1318 0C14 03/17 15:47:04.123 29 radefaultsubtask.cpp(360)
[00EB4F10] 60111D39-34B2-4135-BAC2-7AC4368141A3 WARNING Failed: Hr: = [0x809909b0] : CRADefaultSubTask: WorkitemID
does not exist, {97A32E51-07F8-4BB2-A292-DCD433B2472B}
1318 0C14 03/17 15:47:04.123 05 defaultsubtask.cpp(546)
[00EB4F10] 60111D39-34B2-4135-BAC2-7AC4368141A3 WARNING Failed: Hr: = [0x809909b0] : Encountered Failure: : lVal
: CommandReceivedSpecific(pCommand, pOvl)
1318 0C14 03/17 15:47:04.123 05 defaultsubtask.cpp(751)
[00EB4F10] 60111D39-34B2-4135-BAC2-7AC4368141A3 WARNING Failed: Hr: = [0x809909b0] : Encountered Failure: : lVal
: CommandReceived(pAgentOvl)
1318 0C14 03/17 15:47:04.217 29 radefaultsubtask.cpp(262)
[00EB4F10] 60111D39-34B2-4135-BAC2-7AC4368141A3 WARNING CRADefaultSubTask: WorkitemID to delete does not exist,
{97A32E51-07F8-4BB2-A292-DCD433B2472B}
1318 0C14 03/17 15:47:04.217 03 runtime.cpp(1376)
[008E7060] 60111D39-34B2-4135-BAC2-7AC4368141A3 FATAL Subtask failure, sending status response XML=[<?xml version="1.0"?>
1318 0C14 03/17 15:47:04.217 03 runtime.cpp(1376)
[008E7060] 60111D39-34B2-4135-BAC2-7AC4368141A3 FATAL <Status xmlns="http://schemas.microsoft.com/2003/dls/StatusMessages.xsd" StatusCode="-2137454160" Reason="Error" CommandID="RADeleteWorkItem"
CommandInstanceID="9d7f0075-90a5-4f79-912e-9625fb6ccd76" GuidWorkItem="97a32e51-07f8-4bb2-a292-dcd433b2472b" TETaskInstanceID="60111d39-34b2-4135-bac2-7ac4368141a3"><ErrorInfo xmlns="http://schemas.microsoft.com/2003/dls/GenericAgentStatus.xsd" ErrorCode="536872913"
DetailedCode="-2137454160" DetailedSource="2"><Parameter Name="AgentTargetServer" Value="bspops001.BSPEnterprise.local"/></ErrorInfo></Status>
1318 0C14 03/17 15:47:04.217 03 runtime.cpp(1376)
[008E7060] 60111D39-34B2-4135-BAC2-7AC4368141A3 FATAL ]
1318 0C14 03/17 15:47:04.217 29 radefaultsubtask.cpp(263)
[00EB4F10] 60111D39-34B2-4135-BAC2-7AC4368141A3 WARNING Failed: Hr: = [0x809909b0] : Encountered Failure: : lVal
: (HRESULT)0x809909B0
1318 0C14 03/17 15:47:04.217 05 defaultsubtask.cpp(546)
[00EB4F10] 60111D39-34B2-4135-BAC2-7AC4368141A3 WARNING Failed: Hr: = [0x809909b0] : Encountered Failure: : lVal
: CommandReceivedSpecific(pCommand, pOvl)
1318 0C14 03/17 15:47:04.217 05 defaultsubtask.cpp(751)
[00EB4F10] 60111D39-34B2-4135-BAC2-7AC4368141A3 WARNING Failed: Hr: = [0x809909b0] : Encountered Failure: : lVal
: CommandReceived(pAgentOvl)
1318 0C14 03/17 15:47:04.685 03 workitem.cpp(86)
[00E9CED4] F94114B7-BA2F-46A3-8133-D1B358E78670 ACTIVITY Idle Timer created with timeout = 390000
1318 0C14 03/17 15:47:04.982 05 xmlprocessingutils.cpp(1469)
F94114B7-BA2F-46A3-8133-D1B358E78670 WARNING Failed: Hr: = [0x80070057] : Encountered Failure: : lVal : E_INVALIDARG
1318 0C14 03/17 15:47:04.998 31 vadatasourcestate.cpp(747)
F94114B7-BA2F-46A3-8133-D1B358E78670 WARNING Failed: Hr: = [0x8007007e] GetModuleHandle failed for Library [FileWriterHelperPlugin], will try LoadLibrary
0000 0C14 03/17 15:47:04.998 00 fsutils.cpp(4750)
F94114B7-BA2F-46A3-8133-D1B358E78670 NORMAL CClientReadThrottler::InitializeWaitForClientRead Failed to read sleep time from registry [hr = 0xdf9690]. Setting default [50 ms].
1318 0C14 03/17 15:47:05.014 31 dllmain.cpp(36)
F94114B7-BA2F-46A3-8133-D1B358E78670 NORMAL FileWriterHelperPlugin: DLL_PROCESS_ATTACH
1318 17B8 03/17 15:47:05.014 31 basewriterbackuphelper.cpp(159)
[00EC5A28] F94114B7-BA2F-46A3-8133-D1B358E78670 NORMAL SetOperationType(2)
1318 17B8 03/17 15:47:05.014 22 watsonintegration.cpp(73)
F94114B7-BA2F-46A3-8133-D1B358E78670 NORMAL Inside Watson Handler
1318 17B8 03/17 15:47:05.014 22 watsonintegration.cpp(116)
F94114B7-BA2F-46A3-8133-D1B358E78670 CRITICAL Raising Watson for process
0628 04D0 03/17 15:48:04.827 03
timer.cpp(490) ACTIVITY
CTimerMgr::TimerThread -
I have not been able to import contacts from google or my android to my new I-phone 5. This article helps to a point until error message "cannot create account ... already exist" is received. Please help.
-Reece,
We only have 1 single domain, 1 domain forest, no subdomains, only alias. I had replied to the other post as well. But I am happy to paste it here in case anyone want to read it.
So, after a few months of testing, capture and sending logs back and forth to Apple Engineers, we found out there is a setting in AD, under User Account that prevent us to log into AD from Mountain Lion. If you would go to your AD server, open up a user account properties, then go to Account tab, the "Do not require Kerberos preauthentication" option is checked. As soon as I uncheck that option, immediately I was able to log into AD on the Mac client. Apple engineers copied all my AD settings and setup a test environment on their end and match exact mine AD environment. They was able to reproduce this issue.
The bad part about this is... our environment required the "Do not require Kerberos preauthentication" is checked in AD, in order for our users to login into some of our Unix and Linux services. Which mean that it is impossible for us to remove that check mark because most, if not all of them some way or another require to login into applications that run on Unix and Linux. Apple is working to see if they can come up with a fix. Apparently, no one has report this issue except us. I believe most of you out there don't have that check mark checked in your environment... Anyone out there have any suggestion to by pass or have a work around for this?
Maybe you are looking for
-
Sender File adapter stops polling
Hi All, We have a strange issue. A sender File (NFS) communication channel which was working fine, suddenly stops polling. The cache, is upto date. There are no errors in the channel monitoring. In fact the polling logs are being recorded in the RWB
-
If Company has one to one relationship with Company code
Dear All, If Company has one to one relationship with company code in the transaction system (ECC), can we use company in place off company code - in the BCS system? That is, in this case - under consolidation units - company, i will be using the ECC
-
Domain Name Registry in iWeb and MobileMe
I want to publish a website using MobileMe, and want to use a domain that I have determined is unused. Will MobileMe automatically register that domain when I initially publish it, or do I need to register it first with a third-party domain registry?
-
OID Installation error INST-5165 Error in validating realm
Installation went fine, until the step for OID Information gives error INST-5165: Error in validating Realm, enter valid value for Realm version 11.1.1.6 on Windows Checked the password to contain at least one numeral
-
Need the pages file 09 on the abysmal yosemite
just bought a new apple air, with the yosemite downloaded; but I found the pages 5.5 abysmal, without the full-screen and maneuverability seen in the old one... wanted to retrieve it from apps but in vain; please help out, the mighty apple gurus, rea