The code feature and a list of BIOS settings

I saw a user on this board post their entire BIOS screen and all of it's settings. How did they do that? They never got back to me with an answer?

digital Camera
I must admit i was suprised & suitably impressed when I 1st saw it, Thought it was a Dos utility or something
It's sweet i've used it now it makes things a lot easier.

Similar Messages

How to get the text boxes and select lists dynamically?

Hi,
I have a requirement such that I need to create the text boxes and select lists depending on the user input at the run time. It means that if the user requires four text boxes/select lists then I need to have 4 such thing. If the user need 6 then I need to have 6.
The design may be such that initially only one text box/select list will be available when the page launches. Then as ad when the user asks for more those will be available to the user accordingly.
regards,
Dipankar.

You can use Ajax to call textboxes and select list based on what user enters.
Otherwise make those items conditional and based on what user enters you can display textbox or select list.
You can call Single Textbox and Select List using Ajax for any number of conditions.
Regards
Chandra

How can i get the code html and css of my form please help me

how can i get the code html and css of my form

HI,
If you like to embed the HTML form in your web page then you will need to obtain the form code from the Distribite/Embed tab. Additional information can be found here: http://forums.adobe.com/docs/DOC-1991
You will not be able to access/modify the css code or the rest of the form html code. If you like to view the source of of a HTML page, please use your browser 'view source code' functionality.
I hope this answer your question,
Thanks,
Lucia

Is there a way to view the code screen and the design screen in separate windows

Is there a way to view the code screen and the design screen in separate windows instead of connected. I would like to have the code on one monitor and the design on another

You can open the Code Inspector Window to have the code completely separate from the Design/Document window. You can also then move the CI window to a separate monitor if you like.
Window > Code Inspector or F10

Can you deactivate the phone feature and still use an iphone?

Can you deactivate the phone feature and use an iphone as an ipod touch and still sync with iTunes?? I would like multiple answers so I can compare.
Message was edited by: theharrypottergeek

You can remove the SIM card to prevent any cell phone services and use the iPhone as an iPod Touch.
You can cancel your service with AT&T or use the SIM card with another phone, or get a new phone with AT&T using the SIM card that shipped with the new phone to activate phone and use the iPhone as an iPod Touch.
In order to install a firmware update on a no longer activated iPhone, or restore a no longer activated iPhone with iTunes if wanted or needed, the no longer activated SIM card must be inserted in the iPhone to complete the process - the SIM card that was used with the iPhone when it was activated.

Ok my iphone 3g touch screen is not responding, i can recieve calls and it can charge and connect to itunes, but i cannot go any further than using the home button or the power button, but the slide feature and touch feature is non existent

ok my iphone 3g touch screen is not responding, i can recieve calls and it can charge and connect to itunes, but i cannot go any further than using the home button or the power button, it is only the slide feature and touch feature that has become non existent. Also, i have a f'ew cracks in my screen for a while now and it was running smoothly up until saturday when i sat on it applying large amounts of pressure to the phone screen. Is there a way i can fix this myself without having to recover my phone to factory settings or wasting 50 bucks to get it fixed??

Hi Dire Dawa,
If the screen on your iPhone isn't responding, you may find the following article helpful:
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
Regards,
- Brenden

I bought a movie on iTunes and when it loads up I can only play the bonus features and not the actual film. The title screen is also glitched and merges with the scene selection. I don't think it downloaded properly. what can I do?

I bought a movie on iTunes and when it loads up I can only play the bonus features and not the actual film. The title screen is also glitched and merges with the scene selection. I don't think it downloaded properly. what can I do?

It happens sometimes. Delete the current copies, don't hide from iTunes in the cloud if prompted, close iTunes, reopen, download from iTunes Store > Quicklinks > Purchased > Music > Not on this computer.
While downloading click the download icon at the top right and uncheck Enable simultaneous downloads. You may find it more reliable that way.
tt2

I have an itunes gift card which I cannot redeem. I enter the code correctly and am prompted to sign in over and over again. I have tried resetting the iPhone but the laptop I had itunes on is broken, is there another way?

I have an itunes gift card which I cannot redeem. I enter the code correctly and am prompted to sign in over and over again. I have tried resetting the iPhone but the laptop I had itunes on is broken, is there another way?

See this support article:
http://support.apple.com/kb/TS1292
If you can't get to work after perusing that page, contact the iTunes Store Support; instructions are at the bottom of that article.
Good luck.

OS X says that Compressor was modified since the code sign and won't let me launch it. Any reasoning behind this?

Hello
After updating Compressor to the most recent version (4.2), I get a message saying that Compressor was modified since the code sign and then won't let me launch it.
I have tried reinstalling Compressor restarting and updating my computer.
Any reasoning behind this problem??
Thanks
I am running OS X Yosemite 10.10.3 on a 2013 13inch MacBook Pro, 8GB RAM, 2.8GHz i7.

Start the computer from the installation disk and perform Repair Disk and Repair Permissions using Disk Utility

Recently my macbook charger died and I purchased from a third party seller a new charger that has the same amperage and voltage listed, but different model number. my question is should I be worried, or is it all right?

So recently my model number A1184 charger for my mac book pro died and I purchased a new charger online. They sent me a different charger, a model number S165365, that has the same amperage and voltage listed. my concern is whether it is okay to swap one out for the latter?

Is this your charger you got?
http://www.ebay.com/itm/like/331023651658?lpid=82
I suppose it's OK, though if I were you, I get original stuff even if it's expensive.

I downloaded the app Facebook and my list of contacts (they have already existed) was replaced by facebook's contacts (list). I cannot find my original contacts, ONLY MY FACEBOOK'S contacts. If I acess the Icloud, my contacts ARE THERE (all)!

I downloaded the app Facebook and my list of contacts (they have already existed) was replaced by facebook's contacts (list). I cannot find my original contacts, ONLY MY FACEBOOK'S contacts. If I acess the Icloud, my contacts ARE THERE (all)! I don't know what happend. Can anyone help me?

Turn off facebook syncing of contacts, this should be covered in the User's Guide.

I was given a 50$ iBooks gift card, I enter the code precisely and I am always told the code is not valid... the card was bought at Bestbuy

I was given a 50$ iBooks gift card, I enter the code precisely and I am always told the code is not valid... the card was bought at Bestbuy

shrinkydink54 wrote:
... The information I got back from support was not clear ...
Contact Support again...
Use this Link > Apple Support iTunes Store Contact
Note:
iTunes Gift Cards are only Valid in Country of Issue.

If I upgraded my MacBook Pro from Snow Leopard to Lion via the web and now wish to erase the hard drive and restore it to factory settings to sell. How do I accomplish this?

I upgraded the operating system on my MacBook Pro from Snow Leopard to Lion via the web. Now I need to erase the hard drive and restore it to factory settings, so that I can pass it on. How do I accomplish this? When I insert the Mac OS X install disk, the only option is to erase the free space. Any insight would be appreciated.
Thank you

You need to boot off the original Snow Leopard DVD's that came with the system.
Once you are running off of the DVD you will be able to do a clean install of SL
To boot off the DVD with the system up running Lion insert the DVD. Open Sytem Preferences->Startup Disk and select the DVD then restart the machine.
Message was edited by: Frank Caggiano

HT4085 i tried to fix screen rotation on my ipad 2 after upgrading to ios 7. did the lock / unlock button, the on/off and even reset to factory settings... nothing works... do not know what to do... any suggestions?

i tried to fix screen rotation on my ipad 2 after upgrading to ios 7. did the lock / unlock button, the on/off and even reset to factory settings... nothing works... do not know what to do... any suggestions?

When you reset to factory settings, did you restore as new or did you restore from a backup? If you restored from a backup, you could try restoring as new and don't use the backup. If you do that, you will lose all of your data, but you can download or sync all of your content back to the iPad.
You could also try resetting all settings before your restore as new. Settings>General>Reset>Reset all settings. You will have to re enter all device settings again.
And of course the possibility does exist that the iPad has developed a hardware problem that is causing the rotation issue and only a visit to an Apple Store could determine that for sure.

JSP (no java code), taglibs and dynamic list boxes

Hi,
Can anyone recommend a few examples of JSPs using Tag Libraries to represent a dynamic dropdown box in a form? We are trying to learn how to incorporate tag libs into our pages so we have no code on the JSPs. We currently have a JSP that uses dynamic dropdowns, but the all the code is in the JSP. Most examples we find use either static data or just output data into a table with taglibs. But our pages use many dropdowns, inputs, etc... for updates and inserts. We are using JSPs, servlets, and tags which will get data from EJB's (stateless and entity). (We are also using WEblogic Server 7.0 if that makes any difference) If you know of some good examples or tutorials that show how to accomplish this, it would GREATLY help us out!!
Thanks!

Check out Struts, they have an HTML taglib that does exactly what your talking about. http://jakarta.apache.org/struts

The code feature and a list of BIOS settings

Similar Messages

Maybe you are looking for