The color changes when I click my photos or try to upload them on Dropbox etc

The preview is fine, with the filters on (the ones that I chose while capturing with iPhone's camera) but when I click on a photo, the filters disappear and on some other photos there are not even filters yet still the color changes, like autofixed or something. I cannot delete my photos as I cannot backup on Dropbox etc because of the color change.

You need to sync your apps. Go to the app stab and select sync apps, then selct all of the apps you want on your ipod.
You cannot delete the apps or itunes store. They are likely on another page, in a folder in you have restrictions set. Check all of these.
If all else fails, then reset the homescreen layout.
All of this is covered in the manual.

Similar Messages

Why do the colors change when I reopen a document?

Why do the colors change when I reopen a document?

Are you opening the same Pages document or do you open another document like Word? I has recently been a similar discussion in this forum.

How can I do so the color changes, when i leave the mouse over it?

Hi.
When i press down one of the menu buttons, changes the color to grey it grey. How do i change that, cause I would rater have, that only the script changes color to green.

Hi,
The following links might be helpful:
Create rollover effects with the State Button widget | Adobe Muse CC tutorials
https://helpx.adobe.com/muse/using/assigning-states-objects.html
https://www.youtube.com/watch?v=F2IiQa-12H0
Regards
Sonam

Why does the color change when I open a warm image in Photoshop CS6?

Whenever I open a warm color image in Photoshop CS6, the color of the image automatically changes? Please see the attached screenshots below.
What is the solution to this problem? Please Help.
I use Windows 7 Ultimate. Photoshop CS6.
Graphics Card: Intel HD Graphics 2000

There is no "problem" to "fix". A raw file is just the data captured by the sensor, not yet an image. To produce a useful image it needs to be processed in a raw converter, either automatically in-camera or with a standalone converter (ACR).
The camera LCD shows you an in-camera processed jpeg, according to the camera manufacturer's idea of how the raw data should be interpreted. There is nothing inherently "correct" about this, and a lot of the original data have been thrown away in the process.
ACR doesn't make any assumptions about how the final image should look. It shows you a neutral starting point, with default settings to preserve as much of the original data as possible. The rest is up to you. You're not supposed to just accept the defaults. The sliders are there for a reason.
You can change the ACR defaults at any time if you come up with settings that are more to your taste.

When I click on Photo Booth library it opens up the application instead of accessing my photo library

I can only access my photo library by revealing the Photo Booth photos in the finder. When I click on Photo Booth library in the finder it opens up the application Photo Booth instead of my actual library. It is possible that I deleted something last night I can't be sure. When I access the library by revealing in finder, I checked the path it gives me and it seems correct hd/user/pictures/photoboothlibrary/pictures. Can I fix this so that I can access my Photo Booth library directly through the finder?

Some added toolbar and anti-virus add-ons are known to cause
Firefox issues. '''Disable All of them.'''
Start '''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Firefox in Safe Mode]''' {web Link} by holding down the '''<Shift ''(Mac Options)'' >''' key, and then starting Firefox. Is the problem still there?

Why does JButton background color change when clicking ?

Hello,
I have defined :
JButton mybutton = new JButton(Icon xxx) ;
with no associated text and I set both foreground and background colors to black, and an empty border.
This is because the background color of the container which contents this button is also black and I want to see only the button icon.
When I click on the icon , the button background color becomes grey. How can I change this to make it remains black ?
Thanks a lot.
Gege

Well, the color changes because that is how the look and feel is defined,
presumably to give better feedback to the user that she has clicked the
button.
If you don't want this, you could try using a different L&F which doesn't do this.
Alternatively, If you've only got the one button, you could just do
    UIManager.put( "Button.select", Color.BLACK );If you have multiple buttons, and you want the other buttons to behave
normally, you can extend the one button and have it change the color
while it is pressed, e.g.,
import java.awt.*;
import java.io.IOException;
import java.net.URL;
import javax.swing.*;
public class ButtonSelect extends JFrame {
     public ButtonSelect() throws IOException {
          super();
          setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
          JPanel panel = new JPanel();
          panel.add( new JButton( "Normal" ) );
          Image img = Toolkit.getDefaultToolkit().getImage( new URL("http://www.google.com/intl/en/images/logo.gif" ) );
          ImageIcon ii = new ImageIcon( img );
          JButton b = new JButton( ii ) {
               static final private String KEY = "Button.select";
               public void paint( Graphics g ) {
                    Color save = null;
                    if ( getModel().isArmed() && getModel().isPressed() ) {
                         save = UIManager.getColor( KEY );
                         UIManager.put( KEY, Color.WHITE );
                    super.paint( g );
                    if ( save != null )
                         UIManager.put( KEY, save );
          b.setForeground( Color.WHITE );
          b.setBackground( Color.WHITE );
          b.setFocusPainted( false );
          panel.add( b );
          getContentPane().add( panel );
          pack();
          setVisible( true );
     public static void main( String[] a ) throws IOException {
          new ButtonSelect();
}

Text color changes when more than one color is used in the same paragraph in a bulleted list

I work in a print shop on designers' files preparing them for print. Machine I use is an iMac, plenty of RAM, running Tiger 10.4. Here is my problem: A PC user sent us an InDesign CS3 file. A portion of the text is styled as a bulleted list with character color and bullet (the solid circle) defined as (default) black. However, the style is over-ridden on the bullet and first two words following the bullet with a spot color red, which is present in the Swatches palette (PMS 186). The remainder of the sentence stays black. The text somehow lost this override, and instead of keeping the 2 different colors all the text changed to black. This seems to have occurred when I saved the file on my machine. When I go back and open the original file the text is still colored both red and black. I think that the file was originally an InDesign CS2 file, and could even have been a Indd version 1 or Quark file. Why did the color change with no user intervention? Also, I can't understand why, when the first 2 words are highlighted and changed to red, the bullet also changes to red. (That is good, of course, because that is what we want, but I don't understand how that happens when the character style is black, and I can't even highlight the bullet itself). I sure would appreciate any ideas anyone has on this, I have to try to explain why we printed the text in black when it was supposed to be red and black!

thanks Alan and Bob. Nothing has explained the loss of color so far.
Alan, I will suggest to the designer that she use a nested style. I wonder if that will make the styling more stable moving accross the different platforms.
Bob, I feel like you may have thought, as I did, that hundreds of saves and saved-as and many different applications would have damaged the file, but as you could see by the History, the file was fairly fresh.
There is a very outside chance that I wiped out the style overides by command click but I am really careful and I doubt it.
So I'll thank you both again and check back each day, perhaps this will happen to someone else and become an issue. I have tried to repeat my actions and cause the error again but to no avail.

Photo color changes when I updated to ios 7

I recently updated my iphone 5 to iOS 7 and noticed that there are slight changes in color when you take photos? The color differs when you switch from the photo mode to square mode. When you take photos in the photo mode, the picture is darker compared to photos taken using the square mode. When my phone still has ios 6 installed, the color of the photo and square mode are the same. Does anyone experience the same problem? I tried using iphone 4s updated to ios7 and the color of the picture taken it photo and square mode are the same.

You cannot delete it. The camera app is on the iPad somewhere.
Swipe from screen to screen to look for it.
Check Settings>General>Restrictions and make sure that you didn't disable it.
You can also reset the home screen layout and the icon will reappear - but the home screen will return to the way that it looked when you first activated your iPad.
Settings>General>Reset>Reset Home Screen Layout.

Rules applied to multiple cells trigger color changes when any of the cells

"Rules applied to multiple cells trigger color changes when any of the cells meet the rule’s condition." That's what Help says, but when I follow the directions, it doesn't work. This is in Numbers 08.
I have a table where the contents of one column are either "YES" or "NO", depending on formulas using variables from other cells. If YES, I want the fill of that cell and that of two adjacent cells to change from white to green. I select all three cells and use conditional format rules for "text contains:" YES, then choose my fill color. When I return to the table and introduce values for the variables that trigger the rule, only the cell in the YES/NO column changes to green; the other two remain white.
While I am spreadsheet challenged, I usually can follow directions as plain as those in Help, but it's not working. I couldn't find anything in the discussions after an hour of searching. Is this a known problem or am I just stupid?

For what it's worth, that's the way I read that line in the User Guide as well. What it actually appears to mean, though is 'Rules applied to multiple cells apply independently to each of the cells."
Here's a workaround for your three adjacent columns. Long, but fairly simple steps.
Add a second table to the sheet (Table 2).
Resize the second table to one column wide and as many rows as you want to apply the conditional format to.
Set the width of the column to the same width as the three columns you want to highlight, and the row height(s) to match the rows.
Format to table to have NO Header or Footer row or column.
Use the Wrap Inspector to uncheck "Object causes wrap"
In the first top cell of Table 2, enter an = sign, then Click on Table 1 in the sidebar, Click on the first cell that will hold YES or NO.
Fill the formula down the rest of Table 2.
With all cells in Table 2 selected, use the Cell Format inspector to set the 'text contains yes' rule and the conditional fill colour for these cells.
Test the conditional formating by introducing values into Table 1.
Click on Table 1 in the sidebar, then use the Table inspector to set Cell Fill to 'none'.
Click on Table 2 in the sidebar, then drag that table onto table 1 aligning it to cover the cells in which the conditional formating is to appear.
When positioned (and still selected), go to the Arrange menu and Send Backward to move Table 2 behind the (transparent) cells in Table 1.
With Table 2 still selected, click on the Cell Borders color well and set the Opacity of the borders to 0%.
Click the Text inspector and set the Text colour Opacity for Table 2 to 0%.
Regards,
Barry

My ipad recognizes my home network but will not connect to the internet. When I click on AirPort/preferences at the top of the imac screen it says..."AirPort has a self-assigned ip address and may not connect to the internet".How can I change ip address?

My ipad recognizes my home network but will not connect to the internet. When I click on AirPort/preferences at the top of the imac screen it says..."AirPort has a self-assigned ip address and may not connect to the internet". If this is the root of the problem,how can I change ip address?
Ipad will connect no problem to other networks.

First thing you need I think is to get your iMac connected to the Internet.
Shut down your iMac and you iPad. Then power off your router. Wait 30 seconds and power up the router.
After the router indicates that it is connected to the Internet then start up your iMac and see if it connects. If the iMac connects to the Internet then your iPad should too.
If this power up sequence doesn't work you'll have to dig into the router setup to make sure it is working properly.

How do I enable my iTouch? I am trying to update the apps but when I click "Update All", a pop up "Your Apple ID has been disabled." How do I change it so I can enable my iTouch? Thanks.

How do I enable my iPod? I am trying to update the apps but when I click "Update All", a pop up "Your Apple ID has been disabled." How do I change it so I can enable my iPod? My iPod is not locked (I know my password), but I just can't figure out how to enable it. Thanks.

This may help:
http://support.apple.com/kb/ts2446

HT201471 I updated my iPad 2 (model A1395) to IOS 8 and all the colors changed and the photos are like negatives. why? and how do I fix it?

I updated my iPad 2 (model A1395) to IOS 8 and all the colors changed and the photos are like negatives. why? and how do I fix it?

Looks like someone changed setting in iOS8.
Change this setting.
Settings -> General -> Accessibility -> Grayscale or Invert Colors

Does anyone has a problem with the screen of the new ipad? (there's a part of the screen which the color in it is "very" bright) and when I move the aluminium part of the smart cover when it's attached to the ipad the colors change!! Help!!!

Does anyone has a problem with the screen of the new ipad? (there's a part of the screen which the color in it is "very" bright) and when I move the aluminium part of the smart cover when it's attached to the ipad the colors change!! Help!!!

I'd take it into my local APple store and have them look at it. There may be something wrong inside your device.

In elements 12, when I click a photo in Window Explorer, it will load the elements 12 editor, but it doesn't load the pic ( *.jpg ) into the editor? It always did in earlier versations?

in elements 12, when I click a photo in Window Explorer, it will load the elements 12 editor, but it doesn't load the pic ( *.jpg ) into the editor? It always did in earlier versations?

green
When you click on the Playclaw's Encoder tab, what do you see in the next dialog for Video Compression when the Container field in that dialog is set to .avi?
Since you are seeing some video at all in Premiere Elements (glitchy as it is), I am assuming the video compression is not AVCHD. If that were the case, I would expect you not to be able to import the file at all. By any chance is the video compression Xvid or DivX?
It appears that Video compression could also be "H.264 Intel QuickSync" with a mkv file extension. That seems ruled out since you say your file extension is .avi and not mkv.
So, with the .avi file extension
what is listed as Video Compression and what have you done, if anything, under the Encoder Setup button?
Do you have the same issues with and without the antivirus and firewall(s) disabled?
Also, if you took footage that worked before in Premiere Elements back into today's Premiere Elements, problems or no problems?
At this time, can you import a bunch of jpg photos into a project and work without this type of issue?
Thanks.
ATR

Why does the Right-click - "t" delete a bookmark on the bookmark toolbar, when Right-click - "t" opens a new tab elsewhere. The bookmark toolbar use Right-click - "w" to open in a new tab. Please change this to "t" to...

Why does the Right-click -> "t" delete a bookmark on the bookmark toolbar, when Right-click -> "t" opens a new tab elsewhere in Firefox. The bookmark toolbar use Right-click -> "w" to open in a new tab. Please change this to "t" to... I keep deleting all my bookmark because you don't make the commands consistent!

If you have accidentally removed bookmarks then use "Organize > Undo" in the bookmarks manager (Bookmarks > Organize Bookmarks) to get them back.<br />
The Organize button is the first of the three buttons on the toolbar in the Library (Bookmarks Manager).<br />
That only works if you haven't closed Firefox.
[https://bugzilla.mozilla.org/show_bug.cgi?id=301888 Bug 301888] – Bookmarks cut instead of opened in new tab from Bookmarks Toolbar Folder
(please do not comment in bug reports; you can vote instead)

The color changes when I click my photos or try to upload them on Dropbox etc

Similar Messages

Maybe you are looking for