The colors of my printer are off

I have a HP Officejet Pro 8600, Everytime I print, the colors are all off, I have replaced every single carthridge and I still get the same results. Can someone please help me.

Since the pressure to the screen trick works, that says the internal cable is getting frayed by the hinge. That resistance on the hinge is there deliberately so you don't push it back too far. If you do, you can damage the cable. If the machine was opened after market, the person closing it back up may have not properly tightened the hinge joints, thus defeating the built-in resistance making you end up fraying the cables anyway. Dropping or bumping against the hinge has the same effect if there is enough force exerted. Hopefully none of the above has happened, in which case you may have a case for AppleCare to look at.
Good luck!

Similar Messages

I am trying to print a color photo on my MacBook Pro from iPhoto (not using Photoshop) using Epson 2200 printer, and everything I do in the Color Matching and Print Settings results in a photo with a pink cast to it. What am I doing wrong?

I am trying to print a color photo on my MacBook Pro from iPhoto (not using Photoshop) using Epson 2200 printer, and everything I do in the Color Matching and Print Settings results in a photo with a pink cast to it. What am I doing wrong?

Have you checked the ink cartridges and made sure the nozzles are clear? Are you able to print from outside of iPhoto with the correct color?
Try the following: make temporary copy of the library and do the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iPhoto folder.
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
OT

I have been having a issue with getting the colors on my monitor to match the colors fro my print lab. I now have the monitor calibrated to match the prints but when I open elements it doesn't use the same colors. If i have it use the calibrated profile b

I have been having a issue with getting the colors on my monitor to match the colors fro my print lab. I now have the monitor calibrated to match the prints but when I open elements it doesn't use the same colors. If i have it use the calibrated profile by changing the color management settings, the color picker no longer shows true white or black. How do I get elements 12 to honor the new calibrated settings?

Ok so I've done what you said and this is what it's come back ....
I don't know that these are the errors , but they're the things which don't look right ...
Throughout the shut down there is a recurring line ;
It says ;
Com.apple.launchd 1 0x100600e70.anonymous.unmount 301 PID still valid
Then there are 2 more which I think are related ;
Com.apple.securityd 29 PID job has I overstayed its welcome , forcing removal.
Then the same with fseventd 48 and diskarbitrationd 13
Oh and on Launchd1 : System : stray anonymous job at shut down : PID 301 PPID13 PGID 13 unmount...
Then the last process says "about to call: reboot (RB_AUTOBOOT).
Continuing...
And stops ...
Hope this means something to you ... Thanks again for your help so far :-)

After newest update the color of R3D files is off

If you dynamic link them to AE the color is correct. If I open the soucre settings and readjust the color or reload RMD or do anything and then dynamic link to AE the color in AE is now off completly. I assume the RMD's are fine and its just premiere reading the info incorrectly. The program over all seems to run much slower now after update as well.

FYI if anyone else is having this issue, the only work around I have found is to right click on each and every clip and send to AE. then the correct color shows. I tried doing an entire timeline but it broke the connection of all the AE dynamic link clips which was strange so I had to send each individual clip.

Driver wizard says The drivers of your printer are disabled, but doesn't fix.

OfficeJet 6500 E709a series. Windows 7 64-bit. Printer operates from Word, emails, Copy function. Two programs, Photoshop and Printshop, no longer print when directed to print. Printshop says "Install a printer." Print Shop has tasks in printer queue and won't print. Hp Driver Wizard says,
The current full HP software is already installed for the selected printer but the basic functionality drivers appear to be missing or configured incorrectly. Click Next. After the click: The drivers of your printer are disabled, Click next to enable them.
These responses spool with no further option.
This question was solved.
View Solution.

Hi there mandrelliott,
Try downloading and running the print and scan doctor located here:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
It can fix a lot on its own and if not give a better idea of what is going on.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

HT5463 Hi I am on an iphone 5 IOS7 and when I look at the 'Silence' setting at the bottom of the Don Not Disturb' screen - then even though all of the settings on that screen are off i.e. not green - the 'Silence' -'Only when iPhone is locked' setting is

Hi I am on an iphone 5 IOS7 and when I look at the 'Silence' setting at the bottom of the Don Not Disturb' screen - then even though all of the settings on that screen are off i.e. not green - the 'Silence' -'Only when iPhone is locked' setting is tickedP

Chris thanks for your reply, if none of the Do Not Disturb settings are switched on - then am I right that this setting will have no effect. I.e. I want my phone to ring at all times, so have turned off all of the do not disturb settings

The pages selected to print are all blank

I don't know what is going on but all of a sudden Illustrator cs6 is giving me a message saying "the pages selected to print are all blank." Nothing in my print dialog has changed. Printing a black and white object. Tiling is not checked. There is nothing wrong with the layers as there is only one. I printed these pages last week from AI. Now it won't. I have no idea what is going on now. Please help.

There is no template, and it does it with any file I open.
Sent from my T-Mobile 4G LTE Device

The colors in Photoshop CC are very dull

I have just downloaded a trial version of Photoshop CC and the colors after selection are very dull, for want of a better word. The swatches are all bit, the color selection panel is bright and full color, but after selection, and implimentation on an image are dull, and cerytainly not correct. The monitor is registering colors correctly. I must have pressed something, or changedf something but know not waht. Grateful for any advice

Look at colour spaces. How are you bringing the images into Photoshop? If RGB are they sRGB or Adobe RGB? If RAW, how do you have Camera RAW preferences set?
Have a look at Soft Proofing under the View menu. Try setting it to Monitor RGB and toggle on and off with Ctrl(Cmd) y

How to Make Sure that the Apple Device and Printer are on the same Network

Depending on when one looks on this page, one can find members posting about issues with AirPrint or not being able to find the printer to use AirPrint. The first Item that people are told to check is the Apple Device’s settings. Sometimes the person giving instructions breaks down what to check and how to check and sometimes they do not. Below is a video that walks one through how to print a network configuration page, what information they need to pull from that report and how to then access the Apple devices’ settings and put the device on the same network as the printer. It then walks one through printing to the printer using the AirPrint feature.
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?
This question was solved.
View Solution.

I hope that this is helpful.
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

I have a poster sent to me created in illustrator and I have photoshop cs2. I used the same dimensions from the original to create the poster in cs2. After creating the poster in cs2 using images and texts from the original poster, I printed it off and

So there is a lot of white space at the top and bottom of the page when I print off poster. When I see the poster on the canvas on cs2 it looks how I want it to! I am confused! Help pls. Also I am new to photoshop.
When I sent the finished poster to the person I needed to send it to, it wasn't printing out how we wanted on A4.

What system? What printer? What print settings? Most of that has nothing to do with teh Adobe apps, but your printer's capabilities and nobody can advise without that info.
Mylenium

When I get art work from older illustrator programs and other programs the colors don't print the same as they did about 2 months ago. Big issue for me! How do I cange this or fix it?

Things were going fine until about a month or so ago, now when I take files from older illustrator programs or other programs that ran fine with illustrator before, the colors change. This is a BIG problem for me right now! I tried the on line help thing and I was afraid to erase the files that it asked me to erase because I may want it back the way it now is some day and because I don't have the files from the older program... PLS help! Have tryed to call and am waiting for a chat to open,...

gaskins,
You may have different Color Settings, and if you use Pantone you should be aware that the whole interpretation has changed (a number of times, most radically recently).
If you say more, more can be said.

I am trying to print a chart as a PDF that is in color and the color is not printing

The chart I am trying to print has colored boxes and when I print the chart the boxes are white

Have you checked the ink cartridges and made sure the nozzles are clear? Are you able to print from outside of iPhoto with the correct color?
Try the following: make temporary copy of the library and do the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iPhoto folder.
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
OT

Hi, I just downloaded the latest version of firefox for my mac but everytime I open it it's prompting me to re-save and re-install it. I updated it because I didn't have the latest browser to print coupons off the internet. Please help!!!!!!!!

It's also always asking me to re-save the version of adobe player I downloaded and installed right after mozilla.

Think I just found it. You need to click on the right hand side where it says Firefox 3.6.16 (under the search.
It's confusing because on the left the are some Firefox 3.6.16 for other languages.

Can see the bounding box of the object present on the art-board but the colors of that object are not visible!!!! Why???

I have made some objects in 8-bit design style using rectangular grid tool.
I was working on the file, and i saved the file, and then illustrator crashed, and all the data in the 8 bit grid wasn't showing up, only the bounding boxes(rectangular-grid) of those 8-bit designed objects were present with no color/no fill.
I am attaching some screenshots and jpegs to show how it was before and how it is now.
Can somebody help me out in this?

Illustrator crashed when saving and most probably took some of your file with it.
Do you have a backup copy?

The calendar events and alarms are off by 3 hours since updating to iOS 4.3

I updated to iOS 4.3 last night, and I have a problem where my Calendar times have been offset by 3 hours.
It states that I have an event that on Google Calendar that is set at 12 PM - 9 PM today, however when I view my iPhone calendar that the event goes from 9 AM - 6 PM.
In addition, the alarm for the event has been offset 3 hours AFTER the event. My alarm, which is set ten minutes before the event, went off at 2:50 PM.
Any thoughts? I have the event set to EST in Google Calendar, and the time is correct in Google Calendar.

Hi and welcome to Apple Discussions, Darby.
Is the Time Zone set correctly on your iPhone? Look in Settings, Mail, Contacts, Calendars. Scroll down and make sure the Time Zone is set to the correct Time Zone.
If thats not it, this Apple document might help -> http://support.apple.com/kb/TS2339.
WTH.

The colors of my printer are off

Similar Messages

Maybe you are looking for