The command "feather" and/or "set" is not available

Greetings all.
I am having problems with various actions in PS 11 that all seem to work fine in PS 10. It's primarily either "the command feather is not available" or "the command set is not available". These problems don't occur when I run the actions in PS 10. I've seen this here and there before when running anaction for the first time but it was just a matter of opening up the action and re-checking various boxes that were un-checked for some reason. In this case, everything is checked as it should be.
When they run properly, the actions make their own selections and such so reminding me that a selection is needed is not the fix for me. In PS 10 they run fine on a background or a layer without making any selections first. It's not as if this just happened all of a sudden, it's been a problem every since I installed 11 but I just used different actions instead. It's actually happened in PS 10 with other actions but I just ignored it at that time as well. It's not an intermittent thing, certain actions they either run or don't run.
Please let me know your thoughts and ideas on both the "feather" and "set" issues and thanks in advance for your input.

There are change between CS3 and CS4 which could account for this.
I suggest you remake the actions in CS4

Similar Messages

Internet browser and email set up not available...

I just got my blackberry yesterday from verizon and i have the email and web browser features....however, the globe does not come up as an icon in my applications nor can i set up a personal email account. i've called verizon and was on the phone with them for an hour while they tried everything to figure it out. it says my phone isnt registered with the network but i am so i dont know whats going on. for some reason i cannot access the broadband network and i dont know what to do. i tried looking for a number to call for blackberry technical support but cant find one. does someone know what's going on with my phone? will i need to send it back and get an entirely new one?

Go to > Options >Advanced Options>Host Routing Table> menu key (left of trackball) >register now.....codes should populate in this field. Your browser & email icon should pop up on your screen shortly. Let us know if this works.
John
Stevie Ray! 1954-1990
** Don't forget to resolve your post with the accepted solution.

Office 2013 and SharePoint 2013 server properties - The required term set is not available.

Hi,
After creating new document from ribbon with the new document function on any template the managed metadata based server properties cannot be selected and properties boxes are grayed out. Mouse over displays "The Required term set is not available".
Works fine when using it form resource (SharePoint) domain both with user domain and resource domain accounts.
There is a two-way trust btw domains.
SPNs are done for AppPools.
AppPool accounts have delegations and are set to impersonate with GPO.
SharePoint Web Application is on kerberos authentication.
There is no difference when sites are using user or resource domain AppPool accounts.
The WFE and SQL Server have computer delegations.
Server env: Windows Server 2008 R2 with all updates, SQL Server 2008 R2 with all updates, on-prem SharePoint Server 2013 with no CU.
User env: Windows 7 ENT, IE10 and Office 2013 with all updates.
There is no internet connection and internet connection is not possible. The internet connection is cheated with two DNS A record setting for
www.msftncsi.com and dns.msftncsi.com. Also registry changes "ActiveDnsProbeContent" ip- address for Win7 is done via GPO to private IP. This is done because otherwise check-in/check-out does not work.
Last things on IIS log are:
2014-01-24 10:38:36 192.168.n.n PROPFIND /TestDoc - 5445 0#.w|userdomain\test3-user 192.168.51.51 Microsoft+Office+Word+2013+(15.0.4551)+Windows+NT+6.1 207 0 0 639
2014-01-24 10:38:37 192.168.n.m OPTIONS / - 5445 0#.w|userdomain\test3-user 192.168.51.51 Microsoft+Office+Word+2013+(15.0.4551)+Windows+NT+6.1 200 0 0 842
2014-01-24 10:38:54 ::1 POST /_vti_bin/sharedaccess.asmx - 5445 - ::1 Microsoft+Office+Word+2013+(15.0.4551)+Windows+NT+6.1 200 0 0 15
2014-01-24 10:39:25 ::1 POST /_vti_bin/sharedaccess.asmx - 5445 - ::1 Microsoft+Office+Word+2013+(15.0.4551)+Windows+NT+6.1 200 0 0 0
2014-01-24 10:39:56 ::1 POST /_vti_bin/sharedaccess.asmx - 5445 - ::1 Microsoft+Office+Word+2013+(15.0.4551)+Windows+NT+6.1 200 0 0 15
2014-01-24 10:40:27 ::1 POST /_vti_bin/sharedaccess.asmx - 5445 - ::1 Microsoft+Office+Word+2013+(15.0.4551)+Windows+NT+6.1 200 0 0 15
What I missed.
Br,
-timo-

Same problem here!. Giving the computer network access allows the control to be populated. Then I disabled and restarted and it seems to be ok....

My iPad, Macbook and Apple TV are all set up with the same iCloud email address. I bought the iPhone 6 and accidentally set the iCloud up with a different email. My phone will not let me change the email address to be the same as my other devices,

My iPad, Macbook and Apple TV are all set up with the same iCloud email address. I bought the iPhone 6 and accidentally set the iCloud up with a different email. My phone will not let me change the email address to be the same as my other devices, it tells me that email is already being used. How do I delete the iPhones iCloud account and reinstall it to match my other devices.

Yes it will, just sign out, then sign back in with the correct address.
Settings>iCloud>Sign Out.

I keep getting the start menu and various programmes opening when I use a series of keys when working in my accounting programme, I am not using the command key and is very frustrating me, can anyone help me?

I keep getting the start menu and various programmes opening when I use a series of keys when working in my accounting programme, I am not using the command key and is very frustrating, can anyone help me? I am working on a Mac OS X Version 10.6.8, just need to know if I can reprogram the keys to stop this happening?

Safari browser and menu shortcuts:
http://docs.info.apple.com/article.html?artnum=42951
Mac OS X keyboard shortcuts:
http://support.apple.com/kb/HT1343
http://docs.info.apple.com/article.html?artnum=75459
Changing behavious of Function Keys:
http://support.apple.com/kb/HT3399?viewlocale=en_US
and more useful information on keyboard shortcuts here:
http://www.myfirstmac.com/index.php/mac/articles/mastering-keyboard-shortcuts
How to re-map individual keys:
http://scripts.sil.org/cms/scripts/page.php?site_id=nrsi&item_id=ukelele

Installed new harddrive and I am trying to restore from time machine external back up. I restarted the computer and held the Command key and the R and the restore utility does not appear. what can I do

I installed new hard drive and I am trying to restore from time machine external back up. I restarted the computer and held the Command key and the R and the restore utility does not appear. what can I do

Command + R keys are for Macbooks running Lion and Mountian Lion only. ( i could be wrong on this)
you have a couple of options:
Do a clean install of Snow Leopard via Install DVD.
Clone your old hard drive to your new hard drive via Carbon Copy Cloner
Or click on the link below to give you a better idea.
Hope you get it sorted out.
http://pondini.org/TM/14.html

I have created a PDF and password protected it for view. However, when reading the PDF in Adobe Reader app on the iPad the commenting and annotation options are not available. Is there a way to allow commenting and annotation in the app while password pro

I have created a PDF and password protected it for view. However, when reading the PDF in Adobe Reader app on the iPad the commenting and annotation options are not available. Is there a way to allow commenting and annotation in the app while password protecting the document?

Is there a setting that needs to be set to allow the annotation features? I set password protection to open and then password for editing and set it to Any except page extraction, but it still did not give the annotation option

Sample rate off the audio input and out devices do not match - what to do?

This is fundamental, I know, but nevertheless I can't find my way around it. I get this error message when trying to recor:
Sample rate off the audio input and out devices do not match
and am asked to do this:
Use the appropriate operating system or audio device control panel to adjust the sample rates of the input and output devices to use the same settingt.
I have defined the sample rate to 44.1/16 bit in accordance with my inbuild soundcardt.
I am trying to record from LineIn.
When running on a M-Audio sound card I don't face any problems.
HP 8560W, sound card IDT/High definition audio Codec
Any suggestions?
Knud
Copenhagen

You're sure you have set BOTH the input and output settings to 44.1 16 bit?
Which version of Windows are you running? There are a number of posts on this forum about how to fully access both the Windows Mixer and the Mixer for your soundcard. Especially, you need to ensure that all "Windows Sounds" are turned OFF.

I just installed Yosemite. iPhoto is gone, and Photos does not open. Instead, I am prompted to update to the latest version. The App Store tells me that is not available in the US. What do I do? Cannot access any photos.

I just installed Yosemite. iPhoto is gone, and Photos does not open. Instead, I am prompted to update to the latest version. The App Store tells me that is not available in the US. What do I do? Cannot access any photos.

Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Download and install the OS X Yosemite 10.10.3 Combo Update.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

Hello. I have an iphone 5s and i can not activate imessage nor facetime. I followed all the steps provided by the apple page and still i can not make it connect. The phone is connected to wifi at all times and has ios 8.

Hello. I have an iphone 5s and i can not activate imessage nor facetime. I followed all the steps provided by the apple page and still i can not make it connect. The phone is connected to wifi at all times and has ios 8.

Can you send SMS by using the mobile data network instead of Wi-Fi? I had the same problem setting up my 5s from a backup of my 4s. Only after I sent an SMS via mobile data network, somehow iMessage and FaceTime got activated a couple of minutes later without me doing anything else.
I even changed my Apple ID password, because at one point I could not log into my account when iMessage asked for my account details.
If you have difficulty activating FaceTime or iMessage - Apple Support

I forget the lock code and now I can not access the iphone. What I can do?

I forget the lock code and now I can not access the iphone. I try to restore it, but ask me to go to iphone settings to which I have no access and I can not download the latest version of iOS to do it.
Thanks!

If you have a passcode to the screen lock that you've forgotten, restore the device from the computer to which the device is synced. For information and instructions, see:
http://support.apple.com/kb/ht1212
If that will not work, you'll need to put the device into Recovery Mode and then try the Restore again:
http://support.apple.com/kb/ht1808
If that still doesn't work, as a last resort try DFU mode:
http://www.iclarified.com/entry/index.php?enid=1034
If your device is running iOS 7 and you set up Find My iPhone (iPad/iPod), however, then it has the Activation Lock on it and you'll need to enter in your Apple ID and password to activate the device after restoring:
http://support.apple.com/kb/HT5818
Regards.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question.

I will starting afresh website in my iWeb, it shows only the head or the command line and the command new website is inactive - what do I need to start over

Help........
I will starting afresh website in my iWeb, when I start the program it only shows the head or the command line and the command new website is inactive - what do I need to start over - what have I done wrong

Don't quite understand what you mean, but it says at the bottom that you are still using iWeb 08 so depending on what OSX you are running, you might consider upgrading to iWeb 09. This works with Lion, Mountain Lion and Mavericks.
Apple no longer sells iWeb so if you decide to upgrade, then you'll need to purchase iWeb by going to Amazon and buying the iLife 09 or 11 boxed sets, both of which contain iWeb 09.
Install this on your Mac and it might solve your problems, or just ditch iWeb and start again with one of the newer programmes out there that are still being supported and updated, such as RapidWeaver, Sandvox, Freeway Pro/Express, Flux 4, WebAcapella 4 and EverWeb (http://www.everwebapp.com).

When I purchase music through iTunes from my MacBook Pro, my iPhone 4 iTunes app cannot detect those purchase to allow them to download to my phone. If I open up the iTunes app and select "purchased music not on this iphone" it tells me "All of your a

When I purchase music through iTunes from my MacBook Pro, my iPhone 4 iTunes app cannot detect those purchase to allow them to download to my phone. If I open up the iTunes app and select "purchased > music > not on this iphone" it tells me "All of your available music has been downloaded to this device." However, my purchases are not yet downloaded to the iphone and not available to download. If I go to "purchased > music > all > recent purchases" it will show me the purchases that were most recent the last time I synced my phone, but not the purchases since then.
Any thoughts on how I can remedy this and make all of my purchased music available on my phone without requiring syncing?
iPhone 4

So I have been searching the iStore for Airplay and I find lots of information about what it is, but nothing about how much it costs, how/where to buy it, etc.?
Fortunately, AirPlay does not cost anything as it is a streaming protocol used by Apple. Currently, the AirPort Express and Apple TV are AirPlay-ready. A number of other companies, like JBL, iHome, Denon and Klipsch are also rumored to be working on AirPlay versions of their products.
Your other option would be to get an AirPort Express and connect it to your Onkyo analog or optical digital audio input and stream from iTunes that way. I currently do this with my 10+ year old Harmon Kardon HT receiver.

My wi-fi connection is enabled, however Safari is telling me the server stopped responding. My laptop is working fine on the same wi-fi network. I have reset the network settings and still Safari will not open any web pages. Help!

My wi-fi connection is enabled, however Safari is telling me the server stopped responding. My laptop is working fine on the same wi-fe network. I have reset the network settings and still Safari will not open any web pages. Help!

Ralph..........Did as you suggested and I am still getting the message "Safari could not open the page because the server stopped responding". I am not able to connect with anything on the Internet. Frustrating since I am able to connect with my laptop. Thanks for the suggestion.

I am running OS10.6.8 and have a mail box duplication. I use gmail and when I open my mail I have both the Apple Mail and another set of boxes for Gmail. Both get all mail and when I delete from one, it deletes from the other. How can I get rid of the dup

I am running OS10.6.8 and have a mail box duplication. I use gmail and when I open my mail I have both the Apple Mail and another set of boxes for Gmail. Both get all mail and when I delete from one, it deletes from the other. How can I get rid of the dup

Hi,
According to your descriptioin, I don't think this is system problem, it should be Intel driver problem. It would be contact Intel to confirm this issue whether this is their driver problem.
Roger Lu
TechNet Community Support

The command "feather" and/or "set" is not available

Similar Messages

Maybe you are looking for