The "Complete Percentage" box doesn't work

Can anyone tell me why the b0x remains "0% Complete" even though the form is filled out correctly?

Hi Josh,
Thank you for the quick response!
Please have a look for yourself, it doesn’t work.
In the previous forms made I’m pretty sure it has worked, it’s the last two I’ve made that I’m having trouble with.
https://adobeformscentral.com/?f=FeJH7rF1W1FjDEdyWrOA3A
And if you wonder, the form is in Swedish…
Jessica

Similar Messages

On version 19 which just downloaded why doesn't the primary search box doesn't work when all other search functions (address box and upper search box) do?

The primary search box in the center screen does not respond to any search input.
In contrast:
(1) the https:// address box responds immediately and normally when input is provided and the curved arrow tapped,
(2) the upper search box in line with the address line works normally also when a search inquiry is provided and the magnifying glass tapped, and
(3) all bookmarks work normally as they had previously prior to Firefox upgrading to 19.
Everything seems normal with the exception of the center search box and the search command.

I have tried all the so-called fixes listed here, but since downloading version 19, I can't get the search box to work. If I go through and try the fixes here, it works until I shut it down, and then I have to go through all these steps again. Trying to get someone to help is virtually impossible, and I am getting to the point where I will uninstall Firefox and use IE, as I have no other choice!

When I try to restore my iPod, it stops restoring at the same place and doesn't work. How do I fix this and make it completely restore itself?

When I try to restore my iPod, it stops restoring at the same place and doesn't work. How do I fix this and make it completely restore itself?

Did you make sure that your security software allows iTunes to contact Apple during the restore process? http://support.apple.com/kb/TS3125

I am trying to complete a form but can't get to the final drop down question as it is not displayed because it falls below where my screen ends. i have tried changing the resolution but that doesn't work. any suggestions?

i am trying to complete a form but can't get to the final drop down question as it is not displayed because it falls below where my screen ends. i have tried changing the resolution but that doesn't work. any suggestions?

brilliant
google chrome works where safari doesn't on my macbook air. many thanks
i now have an embarrassing qu. have dowloaded spider solitaire (sad!) and i can't add cards at the bottom of a column for the same reason - the display cuts short. i have tried to extend it with the arrows in the bottom corners but it makes no difference. any ideas?

I own PSE 7 on disc. The laptop it was loaded on died. My new laptop doesn't have an optical drive so I downloaded PSE 7 from the Adobe site. It downloaded fine but I cannot start using it until I enter a S/N. The S/N on the disc box doesn't work.

I own PSE 7 on disc. The laptop it was loaded on died. My new laptop doesn't have an optical drive so I downloaded PSE 7 from the Adobe site. It downloaded fine but I cannot start using it until I enter a S/N. The S/N on the disc box doesn't work.

Those links weren't particularly helpful to me. They convinced me to install the drivers for my USB 2.0 card, but that didn't make a difference. Still no OS X without a PRAM reset if I've dared to venture into OS 9.
It's always been my understanding that an unblessed System Folder will not be selectable in OS 9's Startup Disk control panel. My folders are blessed and healthy. Of course I'm running 9.2.2, as stated in my first message. I also frequently verify and repair my disks and permissions.
I did a verbose startup of OS X, and noticed something funny about "ATY...too old." Perhaps this problem is related? I ventured into my system.log file and there it was, repeated over and over, everytime I've booted this computer:
Aug 8 18:30:24 localhost kernel: From path: "/pci/@d/pci-ata@1/ata-4@0/disk@0:10,\mach_kernel", Waiting on <dict ID="0"><key>IOPathMatch</key><string ID="1">IODeviceTree:/pci/@d/pci-ata@1/ata-4@0/@0:10</string></dict>
Aug 8 18:30:35 localhost kernel: ROM ndrv for ATY,Rage128y is too old (0xb3383430)
Aug 8 18:30:41 localhost init: kernel security level changed from 0 to 1
Anyone know how to interpret that? Is it related to my problem? I googled it, and all I found was a web board of people arguing over whether the Apple installed stock ATI Rage video card that came in the G3's is appropriate for Panther. The Ye's have it as far as I'm concerned...as long as I leave OS 9 alone, my video is fine on this computer!
14" iBook G3 800, B&W PowerMac G3 350, Mac Classic II 16 :-P Mac OS X (10.3.9) System 7 Rocked!

[Acrobat X Standard] The tool box doesn't work. Please help!

[Acrobat X Standard] The tool box doesn't work. Please help!
I have a Acrobat X Standard.
When I open the documents, I can't click the tool box. but when I don't open the documents, I can use the tool box.
To solve the problem,
1. reinstall the menu.
2. reboot the computer.
But, It still didn't work.
Plz help!!

Was it AA X Std that you had these options in (sorry, I only have Pro)? If it was the trial (that is Pro), it may be that Std does not have to feature. Under XI at the Adobe site, there is a comparison of features between Std and Pro that might give you a hint.
There is also an option to turn on or hide many tools. For me there is a small icon just above the tools...comment titles. If you select that it give a list of tools you can display. Often, several are not displayed by default. How you lost them is another things, but it is getting them that is the basic question.

Cinema Display (clear) with DVI/ADC box doesn't work with MacBook Pro

Cinema Display (clear) with DVI/ADC box doesn't work with MacBook Pro when plugged in with a dvi to mini dvi cable. Any ideas what to do to make it work? I lugged the 23" 2500 miles into the wilderness and I need help

Okay, here's an update: the DVI to ADC adapter does work with the Apple displays that I have tried, but it won't work with the Formac. I have tried multiple time to contact them, but to no avail... they don't even respond to threats of posting my opinion of them, which is this:
DON'T BUY ANYTHING FROM FORMAC! They make quality products, but their customer service is a big time joke! They won't take care of you.

How do I get Mac OSX 10.6.4 to print to a Canon iRC2380 colour printer? Using the driver in the Mac's list doesn't work., How do I get Mac OSX 10.6.4 to print to A Canon iRC2380 colour printer? Using the driver in the Mac's list doesn't work.

How do I get Mac OSX 10.6.4 to print to a Canon iRC2380 colour printer? Using the driver in the Mac's list doesn't work., How do I get Mac OSX 10.6.4 to print to A Canon iRC2380 colour printer? Using the driver in the Mac's list doesn't work.

Not sure which driver you mean when you say "the driver in the Mac's list". Apple does not provide a driver for this device, so if you mean one of the default printers that are included with 10.6, like the Generic Postscript or Generic PCL, then these will only work if the optional PS or PCL print kits were installed in the machine. Given your inability to print then it would seem that you have neither kit installed. So this would require you to install the Canon UFR2 driver, which you can obtain via this link.
With the UFR2 driver installed, you add the printer using IP > LPD. Enter the IP address of the iRC2380, leave the Queue name blank and change the Name to iRC2380. Leave the Location field blank and in the Print Using menu, browse to the "Canon iR C2380/2550 UFR II (UK)". Click OK and then Add to complete the queue creation. You should now be able to print. Please reply if it does not work.

The mouse scroll wheel doesn't work with Xorg

I recently installed Solaris 10 on my x86 box. One issue is that the mouse scroll wheel doesn't work with Xorg. Hmmm... Okay, it sometimes did work, and most of the time went on strike, and recovered at random. This pattern continued.
My mouse is an ordinary PS/2 one with two buttons and a scroll wheel. I want to promise that there's absolutely nothing wrong with it per se. Here is some info:
$ uname -a
SunOS arbiter 5.10 Generic_127112-07 i86pc i386 i86pc
$ grep -i mouse /var/log/Xorg.0.log
(**) |-->Input Device "Mouse0"
(II) LoadModule: "mouse"
(II) Loading /usr/X11/lib/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
(==) NVIDIA(0): Silken mouse disabled
(II) Mouse0: Setting Device option to "/dev/mouse"
(**) Mouse0: Protocol: VUID
(**) Mouse0: Core Pointer
(**) Option "Device" "/dev/mouse"
(**) Mouse0: ZAxisMapping: buttons 4 and 5
(**) Mouse0: Buttons: 9
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
# The section about mouse in /etc/X11/xorg.conf follows:
Section "InputDevice"
        Identifier "Mouse0"
        Driver      "mouse"
        Option      "Protocol" "auto"
        Option      "Device" "/dev/mouse"
        Option      "Buttons" "5"
        Option      "ZAxisMapping" "4 5"
        Option      "Emulate3Buttons" "false"
EndSection
# Note that the only result of explicitly changing protocol to ExplorerPS/2, PS/2, IMPS/2 or whatever else is that the cursor jumped here and there and everywhere when I moved the mouse.I ever post one in comp.unix.solaris to ask for help but got no effective solution. Thank you all.

You remember correctly, Yvan.
The 6.2.9 updater is available http://www.apple.com/support/downloads/appleworks629formac.htmlhere. Note that the updater is language specific. The one at the top of the list is for the International English version of AppleWorks. The US English version is the one in the box at the upper right, identified only by its file size.
Regards,
Barry

HT1349 I bought and iPad 3 in Australia and after returning to England the 4g LTE coverage doesn't work

I bought and iPad 3 in Australia and after returning to England the 4g LTE coverage doesn't work

It may or may not be possible to verify the usage of such a technology device. And where did you get the idea that it costs $10 to manufacture and sell an iPad? I think the parts cost alone was $260, not counting manufacturing, shipping, storage, retail space, salespersons, helpdesk support, all the other overhead costs, etc. etc.
With so many people out there trying to scam the system, it will be an uphill battle to try to convince anyone that you bought it and didn't open the box for 14 months. That's very unusual.
At some point, the store you bought something from (in this case it was Apple) has to say no. What if it had been unopened for 2 years, or five years, or 20 years? This is what the warranty period is all about. It starts on the day you buy it and ends at the end of the warranty period, regardless of usage.
I am sympathetic to your plight but if you are able to get a new iPad (refurbished would be more likely), it will be through the kindness of Apple going above and beyond. If you do not get one, it is not Apple's fault you waited this long and there is no requirement for them to replace it.

I Try to open an Indesign document. The message: it is made in a newer version. Go tot CC: Help/Give your Adobe id/Start Indesign again and try to open the document. This doesn't work. How to solve this problem?

I Try to open an Indesign document. The message: it is made in a newer version. Go tot CC: Help/Give your Adobe id/Start Indesign again and try to open the document. This doesn’t work. How to solve this problem?

What version are you running?
What version was it made with?

I have powerpoint for Mac on my imac. I can't seem to get the active text box function to work like it did on my PC. How can I insert an active textbox into a presentation that will allow me to type while presenting?

I have powerpoint for Mac on my imac. I can't seem to get the active text box function to work like it did on my PC. How can I insert an active textbox into a presentation that will allow me to type while presenting?

I've gotten a little further on this. The dynamic select is
working fine. It's the "a href" code that isn't. I'm wondering if
someone can look at this line and tell me if it's okay to build the
query string this way. The storeid comes through fine but I'm still
not getting the employeeid value to pass. Here's line that's not
working:
td><a href="registerStoreCust.php?storeid=<?php echo
$row_storeRS['storeid']; echo "&employeeid="; echo
$_GET['employeeLM']; ?>">Register
Customer</a></td>

How can I add a new Template to My Templates in Pages? I've read most of the discussions on the subject but it doesn't work for me. By the time I reach the Templates folder, I only see templates for Numbers and not for Pages. Need help, please. Thanks

How can I add a new Template to My Templates in Pages? I've read most of the discussions on the subject but it doesn't work for me. By the time I reach the Templates folder, I only see templates for Numbers and not for Pages. Need help, please. Thanks

Si vous avez utilisé la commande Save As Template depuis Pages, il y a forcément un dossier
iWork > Pages
contenant Templates > My Templates
comme il y a un dossier
iWork > Numbers
contenant Templates > My Templates
Depuis le Finder, tapez cmd + f
puis configurez la recherche comme sur cette recopie d'écran.
puis lancez la recherche.
Ainsi, vous allez trouver vos modèles personnalisés dans leur dossier.
Chez moi, il y en a une kyrielle en dehors des dossiers standards parce que je renomme wxcvb.template quasiment tous mes documents Pages et wxcvb.nmbtemplate à peu près tous mes documents Numbers.
Ainsi, quand je travaille sur un document, je ne suis pas ralenti par Autosave.
Désolé mais je ne répondrai plus avant demain.
Pour moi il est temps de dormir.
Yvan KOENIG (VALLAURIS, France) mercredi 23 janvier 2011 22:39:28
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community

URGENT - Error "Unable to open file because it isn't a valid Keynote document" - and there is no index file (so the usually suggested solution doesn't work)

Hi there,
As you see in the heading, I am getting the error "Unable to open file because it isn't a valid Keynote document". There has been a number of threads on this and there seems to be a usual work around that works in many cases, by changing the file extension to .zip and then looking for the index file and making some more extension changes...unfortunately, in my case (and it also happened to others), there is no index file, so the usually suggested solution doesn't work...Can someone please help? I am working on a tight deadline and would like to try and recover the file.
Thanks a lot in advance.
Best,
Just a regular apple user
PS: any other presentation opens fine in Keynote (09)

Have you tried to create a new Keynote Presentation? Do you have another previously saved Keynote file you can try to open? These will make sure it is a problem with this specific presentation and not the whole program.
Try to delete the Keynote Preferences. They are located in the folder Macintosh HD>Users>your username>Library>Preferences and titled com.apple.iWork.Keynote.plist.
Your profile shows that you are still on Mc OS 10.6.6, is that true? You might try to update to 10.6.7 as I believe that there was a font issue fixed in this update (I don't know for sure since I am still on 10.5.8).
Try those and report back and we will see what we can come up with.

The "Search" function box doesn't find things that are there! Why?!

The "Search" function box doesn't find things that are there! Why? Eg: It doesnt show all my Sent and Received emails, but it will find an email that I half wrote and deleted. Unsure why or how to explain more fully.
I also don't understand if I type in "James email" or "J" into the search box and all the J / James stuff appears but it doesn't show the emails I know have been sent and I know are somewhere because I rang "James" up to check, but the search box shows random thing I am NOT looking for, even if I type in fully what I am looking for and test it by typing in full titles of things.
It also doesn't store all my sent emails in "Sent" box. Confused! I'm not sure if the "Search" box just isn't up to the job or if it is broken / i'm doing something wrong? Maybe the email address I use isn't set up properly?

This can happen sometimes if the cache is not cleared correctly when items are not deleted from your device.
The only solution to this is to do a restore to clean out the cache file.

The "Complete Percentage" box doesn't work

Similar Messages

Maybe you are looking for