The computer can not find any hard disk

hello to me appeared a problem installing an SSD in my mac pro 1.01 of 2007 afterrestarting the mac I went out one with a question mark with the famous gray screen, and I do not recognize any system disk.

Hold down the Option key as you start up.
Wait for the screen to be drawn with Icons for each bootable volume.
If your SSD is there, choose it and click the arrow below it.
Then use System Preferences > Startup Disk ...
... to set the correct Startup Disk
If your SSD is not among those shown, choose Recovery HD from those shown, and use Disk Utility "Repair Disk" on it.

Similar Messages

Setup did not find any hard disk drive in your computer

I have an old Compaq Presario 7598 Desktop (Windows XP) which I use as a backup machine. Recently when I tried to start it I am getting "Unable to access hard disk,. Operating system not found on any devices". Then when I tried to start with XP Boot Disk (CD), I am getting "Setup did not find any hard disk drive in your computer".
Can someone help me to resolve this issue?
Thanks.

Repeatedly tap the F10 key at boot, you should see information for the hard disk.
Testing the hard drive:
http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-bph05701#N100A0
Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

Setup did not find any hard disks installed in your computer

OK, I spent about 30 minutes looking for a solution to this and haven't found anything. I'm too lazy to keep looking, and I need to get back to work...
Setup info:
-Mac Pro (Early 2008)
-Dual 3.2Ghz processors
-32GB RAM
-RAID Card with four 1TB drives attached (RAID 5 with two volumes: one Mac OS X 10.5.3 and one Mac OS X Server 10.5.3)
-320GB SATA drive that originally came with the unit in hard drive bay 1, now installed in the 2nd optical drive bay and connected to the 5th internal SATA port. It's partitioned with BootCamp: 32.88GB for Mac OS X 10.5.3 (installed and running, used to create the BootCamp partition) and 264.71GB available for Windows.
Windows install disc:
Took my Windows XP SP1 install disc and used nLite to slipstream SP2 and SP3 and burn a new install disc.
When I boot into the Windows install disc, everything goes fine, until it actually gets to the part where I should be selecting my hard drive (Hit Enter to Install Windows) for installation. Instead , when I hit enter, I get the message that "+Setup did not find any hard disks installed in your computer. blah, blah, blah, hit F3 to restart.+"
I'm assuming this is a SATA issue and that I need to get a SATA driver slipstreamed into my install disc so that the Windows installer will see the SATA drive.
Any suggestions on how to proceed?

Everything I've read says that that won't work because I have the RAID card.
Sounds like I'm out of luck, if BootCamp can't be installed on a SATA drive not connected to one of the original 4 bays.
Also, I'm concerned about taking the RAID drives out (I'd have to take all 4 out or it corrupts the RAID setup when I stick the one back in) then putting them back in and having everything return to an All Good status.
Message was edited by: chadcole26

I keep getting a message that the computer can not find a .local server

I keep getting a message that the computer can not find a .local server

Hi, ImTiffanyA.
The most common cause for this issue would be media present that is purchased with another Apple ID. The article below will walk you through the process of verifying if that is the case or correcting the issue if not.
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/TS1389
Cheers,
Jason H.

I can not find my Hard disk

I was useing my hard disk fine but i downlod the program (Register NTFS for Mac OS X) and
The program ended with validity after that my hard disk dose not showing

Uninstall the program. It should have come with an uninstaller. If not, contact the developer for instructions.

K9A2: Win2k "Setup did not find any hard disk drives"

Even with the SB600 "F6 Disk" and similar disk for PDC_42819, I can't seem to get Windows setup to recognize the existence of the RAID configured from SATA1-4 on the mainboard.
I've got a Fastbuild raid 1+0 of four drives that shows up as healthy / functional, but even though you see the drive "announced" during startup, SATA1-4 turn up nothing in the BIOS basic settings. It doesn't surprise me so much then that a driver would be required for Windows setup to find the resource, that that does not seem to have helped.
I've tried SATA mode in BIOS as RAID, AHCI and IDE, and only with IDE did installation see anything at all.
Enable / disable extra RAID controller does not seem to have mattered much.
Any idea on the magic trick required to get a RAID array identified?

Quote from: Quadrifoglio Verde on 31-March-08, 22:19:29
Are you trying to make this RAID 0+1 array bootable?
Yes.Quote
I have tried several RAID levels on both controllers and everything works out eventually, but this was all done with an OS running from a single drive...
I'm sure it would work easily enough booting from a single IDE drive plus the RAID, but then I'd lose all the benefits of RAID redundancy, not to mention the performance gains of stripe/mirror.
No matter what I do with the boot sequence, it seems that the SB600 SATA/RAID never asserts the defined / healthy logical drive as "C:" at system start. If Windows needs to have a device driver loaded just to see the RAID, I don't know how it ever does, if that (IDE mode) isn't already built into the kernel.
This still does not answer my initial conundrum of why it can't even see the array when booting from CD with the help of an F6 disk. The moment it reads the disk, it's really supposed to have all the information it needs to talk to the SB600 chip and see the logical drive as defined, and use it for installation. Of course, when the machine rebooted without the benefit of loading drivers from the F6 disk, it would still be blind to the existance of the RAID ....

Windows 8.1 installer can not find any disk partitions at all in boot camp 5.1

Hello
I have purchased a new Imac 27" latest model with Mavericks pre-installed. I am trying to install windows 8.1 pro with original disc 64 bit in Boot camp assistant 5.1. I am using a usb dvd writer to read windows disc. I have rebooted into the windows installer after mac finised downloading the windows support software into my 64 gigabyte flash drive which is formatted in ms dos fat 32 format. I made it too "Where do you want to install windows" screen but problem is there are no drives showing at all to select. The space where you usually see four partition drives with the bottom one named Boot camp, that space is totally empty showing that there is no internal hard drive at all....simply shows a error at the bottom can not find any drive. Please Help!!!!!!
The mac os is running fine if i restart the mac and cancel windows installation. I have gone into boot cam assistant to delete the windows partition and retry but the same problem prisists. Plz help.

HI..
Better to post your topic in the Boot Camp community > Boot Camp: Windows Software: Apple Support Communities

Computer can not find the wifi internet

Goodmorning,
I have a mac book pro (with lion) and wifi internet at home. All of a sudden my computer can not find my network although it is available and working as an i pad and a mobile are working via this wifi network.
I tried 'create a network' and 'join other network' but it looks like the computer can not find the wifi network. My computer has internet access via cable, but just by plugging in the cable wihtout changing the settings (switching off the wifi).
Any idea what to do ?
Thanks

The Mac on cable uses Ethernet. Wi-Fi uses AirPort. Try and delete your Airport setting and re-enter your configurations again.

HT3887 I am trying to pair my iphone 4 to my 2011 Kluger KX-R. I have turned bluetooth on my phone but it keeps searching for devices and can not find any. My computer can find my phone but my phone can not find my computer.

I am trying to pair my phone to my 2011 Toyota kluger KX-R. I have turned bluetooth on my phone but it keeps searching for devices and can not find any, including my computer.

No worries. Often after iTunes updates you have to reconnect your device in order for iTunes to see it. Happens to me all the time!

HT3964 Hello, my isight camer is not working properly, i was using photo booth and suddenly the image was black or too dark and also ichat and facetime are too dark as well, please helpme out i can not find any solution.

Hello, my isight camer is not working properly, i was using photo booth and suddenly the image was black or too dark and also ichat and facetime are too dark as well, please helpme out i can not find any solution.

read this and see if it helps: http://support.apple.com/kb/ht2090

Adobe premiere can not find any module capable of playing video. Update the video drivers and start again.

Adobe Premiere can not find any module capable of playing video. Update the video drivers and start again.
I've tried all the options suggested and the problem continues.
What else can I do?
Note: I had already worked before.
Windows 8.1
Notebook i7, 8M memory, video card Nvidia (updated).
Adobe Premiere Pro 2014
Please help me. Thank you.
mailto: [email protected]

Here is a link to an Adobe TechNote about the same issue with an earlier (much earlier!) version of Premiere Elements and Windows XP.
http://kb2.adobe.com/cps/324/324938.html
I'll leave it to Steve and Bill as to whether the fix offered in the link for Premiere Elements 2 would still be applicable to your version of Premiere Elements.
Hope this is of some assistance.

My iPhone 4s Bluetooth is not working, I have ios 5.1 but just can't get my Sony erricson hbh-pv715 headset to connect to the phone, the phone can't find any Bluetooth device, can you help please

My iPhone 4s Bluetooth is not working, I have ios 5.1 but just can't get my Sony erricson hbh-pv715 headset to connect to the phone, the phone can't find any Bluetooth device, can you help please

Yes it's in pairing mode, it worked fine with the 3GS but doesn't seem to work with the 4s, my 4s can't find any other bluetooth device, I think the problem ls with apple?

HT1478 I can't find any "Enable Disk" option on the Summary tab of iTunes

I can't find any "Enable Disk" option on the Summary tab at all for my iPod, running the latest iOS on the latest iTunes 11. Any clues?
I am simply trying to take all the photos on the iPod and put them on a folder on my Snow Leopard workstation.

ahhh, Thank you Master Grasshopper!

HT203167 i tried downloading an album - my itunes locked up, in purchases on itunes online it says it downloaded - how do i re-download to the same computer - can not find an option to do that?

i tried downloading an album - my itunes locked up, in purchases on itunes online it says it downloaded - how do i re-download to the same computer - can not find an option to do that?

Assuming you are in a region where you are allowed to redownload your past music purchases, delete the corrupt tracks from the music section of your iTunes library, close & then reopen iTunes, go to the iTunes Store home page, click the Purchased link from the Quick Links section in the right-hand column, then select Music and Not on this computer. You should find download links for your tracks there.
While downloading select Downloads in the left-hand column and make sure Allow Simultaneous Downloads is unchecked. This seems to help with partial downloads...
If the problem persists, or that facility is not yet available in your region, contact the iTunes Store support staff through the "Report a problem" links in your account history, or via Contact Support.
See also:
HT5085 - iTunes in the Cloud and iTunes Match Availability
HT2519 - Downloading past purchases from the App Store, iBookstore, and iTunes Store
tt2

Wireless card can not find any network.

I have 2 wireless card:
TP-Link PCI card:TL-WN851N
D-Link USB card:DWA-127
both card work fine under windows.
but TP-Link can not find any wireless network,even if I moved my wirelss router to same room with TP-Link wireless card.
Anybody have an idea ?
I comfirmed the kernel driver is properly loaded:
[root@XSign ~]# lspci -k
04:00.0 Network controller: Qualcomm Atheros AR9227 Wireless Network Adapter (rev 01)
Subsystem: Qualcomm Atheros Device 0300
Kernel driver in use: ath9k
Kernel modules: ath9k
[root@XSign ~]# ifconfig -a
//this is D-Link card
wlp0s20u11: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.2.101 netmask 255.255.255.0 broadcast 255.255.255.255
inet6 fe80::bef6:85ff:fe67:57c prefixlen 64 scopeid 0x20<link>
ether bc:f6:85:67:05:7c txqueuelen 1000 (Ethernet)
RX packets 171436 bytes 230296030 (219.6 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 107153 bytes 12458452 (11.8 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
//this is TP-Link card
wlp4s0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether 08:57:00:34:4f:c5 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
[root@XSign ~]# ifconfig wlp4s0 up
[root@XSign ~]# iwlist wlp4s0 scan
wlp4s0 No scan results
and I can find many wireless network with same command through card wlp0s20u11
AR9227 is supported : http://wireless.kernel.org/en/users/Drivers/ath9k/

Thanks for reply.
one more thing, I noticed the power LED didn't "light up" when I execute the "power up" command.
[root@XSign hacksign]# ip link show wlp4s0
3: wlp4s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DEFAULT group default qlen 1000
link/ether 08:57:00:34:4f:c5 brd ff:ff:ff:ff:ff:ff
[root@XSign hacksign]# ip link set wlp4s0 up
[root@XSign hacksign]# ip link show wlp4s0
3: wlp4s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DEFAULT group default qlen 1000
link/ether 08:57:00:34:4f:c5 brd ff:ff:ff:ff:ff:ff
[root@XSign hacksign]# dmesg | grep firmware
[root@XSign hacksign]#
any suggesstions ?
below is my complete demsg output:
[root@XSign hacksign]# dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.15.1-1-ARCH (nobody@var-lib-archbuild-testing-x86_64-tobias) (gcc version 4.9.0 20140604 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Jun 17 09:32:20 CEST 2014
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=08871484-d630-41f6-a743-4086ad9f8628 rw noisy init=/usr/lib/systemd/systemd nomodeset
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bb231fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb232000-0x00000000bb238fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bb239000-0x00000000bc247fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bc248000-0x00000000bc74dfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bc74e000-0x00000000ce799fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ce79a000-0x00000000ce9adfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ce9ae000-0x00000000cea93fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cea94000-0x00000000cf7fefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cf7ff000-0x00000000cf7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022dffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. G1.Sniper B5/G1.Sniper B5-CF, BIOS F6 01/17/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x22e000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7E00000000 write-back
[ 0.000000] 1 base 0200000000 mask 7FE0000000 write-back
[ 0.000000] 2 base 0220000000 mask 7FF8000000 write-back
[ 0.000000] 3 base 0228000000 mask 7FFC000000 write-back
[ 0.000000] 4 base 022C000000 mask 7FFE000000 write-back
[ 0.000000] 5 base 00E0000000 mask 7FE0000000 uncachable
[ 0.000000] 6 base 00D0000000 mask 7FF0000000 uncachable
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcf800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd710-0x000fd71f] mapped at [ffff8800000fd710]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b3e000, 0x01b3efff] PGTABLE
[ 0.000000] BRK [0x01b3f000, 0x01b3ffff] PGTABLE
[ 0.000000] BRK [0x01b40000, 0x01b40fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x22de00000-0x22dffffff]
[ 0.000000] [mem 0x22de00000-0x22dffffff] page 2M
[ 0.000000] BRK [0x01b41000, 0x01b41fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x22c000000-0x22ddfffff]
[ 0.000000] [mem 0x22c000000-0x22ddfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x22bffffff]
[ 0.000000] [mem 0x200000000-0x22bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbb231fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0xbb1fffff] page 2M
[ 0.000000] [mem 0xbb200000-0xbb231fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbb239000-0xbc247fff]
[ 0.000000] [mem 0xbb239000-0xbb3fffff] page 4k
[ 0.000000] [mem 0xbb400000-0xbc1fffff] page 2M
[ 0.000000] [mem 0xbc200000-0xbc247fff] page 4k
[ 0.000000] BRK [0x01b42000, 0x01b42fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xbc74e000-0xce799fff]
[ 0.000000] [mem 0xbc74e000-0xbc7fffff] page 4k
[ 0.000000] [mem 0xbc800000-0xce5fffff] page 2M
[ 0.000000] [mem 0xce600000-0xce799fff] page 4k
[ 0.000000] BRK [0x01b43000, 0x01b43fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xcf7ff000-0xcf7fffff]
[ 0.000000] [mem 0xcf7ff000-0xcf7fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x379c0000-0x37cd7fff]
[ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000CEA6C078 000074 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000CEA77460 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000CEA6C188 00B2D7 (v02 ALASKA A M I 000000F6 INTL 20091112)
[ 0.000000] ACPI: FACS 0x00000000CEA92080 000040
[ 0.000000] ACPI: APIC 0x00000000CEA77570 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000CEA775E8 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x00000000CEA77630 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x00000000CEA77B70 000AD8 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: MCFG 0x00000000CEA78648 00003C (v01 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000CEA78688 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000CEA786C0 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000CEA78A30 003299 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
[ 0.000000] ACPI: DMAR 0x00000000CEA7BCD0 000080 (v01 INTEL HSW 00000001 INTL 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000022dffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x22dffffff]
[ 0.000000] NODE_DATA [mem 0x22dff6000-0x22dffafff]
[ 0.000000] [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880225600000-ffff88022d5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x22dffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0xbb231fff]
[ 0.000000] node 0: [mem 0xbb239000-0xbc247fff]
[ 0.000000] node 0: [mem 0xbc74e000-0xce799fff]
[ 0.000000] node 0: [mem 0xcf7ff000-0xcf7fffff]
[ 0.000000] node 0: [mem 0x100000000-0x22dffffff]
[ 0.000000] On node 0 totalpages: 2081322
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13131 pages used for memmap
[ 0.000000] DMA32 zone: 840334 pages, LIFO batch:31
[ 0.000000] Normal zone: 19328 pages used for memmap
[ 0.000000] Normal zone: 1236992 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb232000-0xbb238fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbc248000-0xbc74dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xce79a000-0xce9adfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xce9ae000-0xcea93fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcea94000-0xcf7fefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcf800000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xcf800000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88022dc00000 s87168 r8192 d23424 u524288
[ 0.000000] pcpu-alloc: s87168 r8192 d23424 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2048778
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=08871484-d630-41f6-a743-4086ad9f8628 rw noisy init=/usr/lib/systemd/systemd nomodeset
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8112620K/8325288K available (5222K kernel code, 885K rwdata, 1644K rodata, 1116K init, 1284K bss, 212668K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:8448 nr_irqs:712 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3192.796 MHz processor
[ 0.000021] Calibrating delay loop (skipped), value calculated using timer frequency.. 6388.65 BogoMIPS (lpj=10642653)
[ 0.000023] pid_max: default: 32768 minimum: 301
[ 0.000027] ACPI: Core revision 20140214
[ 0.007164] ACPI: All ACPI Tables successfully acquired
[ 0.008322] Security Framework initialized
[ 0.008326] Yama: becoming mindful.
[ 0.008691] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.010281] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.010989] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.010996] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.011160] Initializing cgroup subsys memory
[ 0.011162] Initializing cgroup subsys devices
[ 0.011164] Initializing cgroup subsys freezer
[ 0.011165] Initializing cgroup subsys net_cls
[ 0.011166] Initializing cgroup subsys blkio
[ 0.011180] CPU: Physical Processor ID: 0
[ 0.011181] CPU: Processor Core ID: 0
[ 0.011958] mce: CPU supports 9 MCE banks
[ 0.011969] CPU0: Thermal monitoring enabled (TM1)
[ 0.011978] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
tlb_flushall_shift: 6
[ 0.012042] Freeing SMP alternatives memory: 20K (ffffffff819f6000 - ffffffff819fb000)
[ 0.012591] ftrace: allocating 20223 entries in 79 pages
[ 0.018707] dmar: Host address width 39
[ 0.018709] dmar: DRHD base: 0x000000fed90000 flags: 0x1
[ 0.018715] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap d2008c20660462 ecap f010da
[ 0.018716] dmar: RMRR base: 0x000000ce92c000 end: 0x000000ce938fff
[ 0.018781] IOAPIC id 2 under DRHD base 0xfed90000 IOMMU 0
[ 0.018781] HPET id 0 under DRHD base 0xfed90000
[ 0.018782] Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.018855] Enabled IRQ remapping in x2apic mode
[ 0.018856] Enabling x2apic
[ 0.018856] Enabled x2apic
[ 0.018860] Switched APIC routing to cluster x2apic.
[ 0.019222] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.052254] smpboot: CPU0: Intel(R) Core(TM) i5-4460 CPU @ 3.20GHz (fam: 06, model: 3c, stepping: 03)
[ 0.052259] TSC deadline timer enabled
[ 0.052264] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[ 0.052268] ... version: 3
[ 0.052269] ... bit width: 48
[ 0.052270] ... generic registers: 8
[ 0.052270] ... value mask: 0000ffffffffffff
[ 0.052271] ... max period: 0000ffffffffffff
[ 0.052271] ... fixed-purpose events: 3
[ 0.052272] ... event mask: 00000007000000ff
[ 0.079047] x86: Booting SMP configuration:
[ 0.079048] .... node #0, CPUs: #1
[ 0.093027] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.099712] #2 #3
[ 0.134308] x86: Booted up 1 node, 4 CPUs
[ 0.134310] smpboot: Total of 4 processors activated (25552.63 BogoMIPS)
[ 0.136937] devtmpfs: initialized
[ 0.138913] PM: Registering ACPI NVS region [mem 0xbb232000-0xbb238fff] (28672 bytes)
[ 0.138915] PM: Registering ACPI NVS region [mem 0xce9ae000-0xcea93fff] (942080 bytes)
[ 0.139415] pinctrl core: initialized pinctrl subsystem
[ 0.139443] RTC time: 11:10:27, date: 06/26/14
[ 0.139466] NET: Registered protocol family 16
[ 0.139522] cpuidle: using governor ladder
[ 0.139522] cpuidle: using governor menu
[ 0.139531] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.139532] ACPI: bus type PCI registered
[ 0.139533] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.139569] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.139570] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.143859] PCI: Using configuration type 1 for base access
[ 0.144410] ACPI: Added _OSI(Module Device)
[ 0.144411] ACPI: Added _OSI(Processor Device)
[ 0.144412] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.144413] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.147021] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.148606] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.161070] ACPI: SSDT 0x00000000CE9A3C18 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.161369] ACPI: Dynamic OEM Table Load:
[ 0.161370] ACPI: SSDT 0x0000000000000000 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.174502] ACPI: SSDT 0x00000000CE9A3618 0005AA (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.174917] ACPI: Dynamic OEM Table Load:
[ 0.174918] ACPI: SSDT 0x0000000000000000 0005AA (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.184454] ACPI: SSDT 0x00000000CE9A2D98 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.184763] ACPI: Dynamic OEM Table Load:
[ 0.184765] ACPI: SSDT 0x0000000000000000 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.194062] ACPI: Interpreter enabled
[ 0.194068] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140214/hwxface-580)
[ 0.194072] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140214/hwxface-580)
[ 0.194082] ACPI: (supports S0 S3 S4 S5)
[ 0.194083] ACPI: Using IOAPIC for interrupt routing
[ 0.194102] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.199374] ACPI: Power Resource [FN00] (off)
[ 0.199419] ACPI: Power Resource [FN01] (off)
[ 0.199463] ACPI: Power Resource [FN02] (off)
[ 0.199506] ACPI: Power Resource [FN03] (off)
[ 0.199551] ACPI: Power Resource [FN04] (off)
[ 0.199896] ACPI: \_PR_.CPU4: failed to get CPU APIC ID.
[ 0.199899] ACPI: \_PR_.CPU5: failed to get CPU APIC ID.
[ 0.199901] ACPI: \_PR_.CPU6: failed to get CPU APIC ID.
[ 0.199903] ACPI: \_PR_.CPU7: failed to get CPU APIC ID.
[ 0.200027] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.200030] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.200156] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[ 0.200234] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.200577] PCI host bridge to bus 0000:00
[ 0.200579] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.200581] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.200582] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.200583] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.200584] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.200585] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.200586] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.200587] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.200587] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.200588] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 0.200589] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfeafffff]
[ 0.200595] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
[ 0.200653] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[ 0.200679] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.200711] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.200755] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[ 0.200771] pci 0000:00:14.0: reg 0x10: [mem 0xf3220000-0xf322ffff 64bit]
[ 0.200822] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.200847] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.200874] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[ 0.200890] pci 0000:00:16.0: reg 0x10: [mem 0xf323c000-0xf323c00f 64bit]
[ 0.200945] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.200993] pci 0000:00:16.3: [8086:8c3d] type 00 class 0x070002
[ 0.201006] pci 0000:00:16.3: reg 0x10: [io 0xf0a0-0xf0a7]
[ 0.201013] pci 0000:00:16.3: reg 0x14: [mem 0xf323a000-0xf323afff]
[ 0.201114] pci 0000:00:19.0: [8086:153b] type 00 class 0x020000
[ 0.201128] pci 0000:00:19.0: reg 0x10: [mem 0xf3200000-0xf321ffff]
[ 0.201135] pci 0000:00:19.0: reg 0x14: [mem 0xf3239000-0xf3239fff]
[ 0.201141] pci 0000:00:19.0: reg 0x18: [io 0xf040-0xf05f]
[ 0.201192] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.201219] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 0.201246] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[ 0.201264] pci 0000:00:1a.0: reg 0x10: [mem 0xf3238000-0xf32383ff]
[ 0.201342] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.201378] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.201405] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[ 0.201416] pci 0000:00:1b.0: reg 0x10: [mem 0xf3230000-0xf3233fff 64bit]
[ 0.201476] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.201503] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.201526] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[ 0.201583] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.201611] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.201635] pci 0000:00:1c.3: [8086:244e] type 01 class 0x060401
[ 0.201692] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.201720] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.201750] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[ 0.201768] pci 0000:00:1d.0: reg 0x10: [mem 0xf3237000-0xf32373ff]
[ 0.201847] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.201883] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.201910] pci 0000:00:1f.0: [8086:8c50] type 00 class 0x060100
[ 0.202046] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
[ 0.202058] pci 0000:00:1f.2: reg 0x10: [io 0xf090-0xf097]
[ 0.202064] pci 0000:00:1f.2: reg 0x14: [io 0xf080-0xf083]
[ 0.202070] pci 0000:00:1f.2: reg 0x18: [io 0xf070-0xf077]
[ 0.202076] pci 0000:00:1f.2: reg 0x1c: [io 0xf060-0xf063]
[ 0.202081] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
[ 0.202087] pci 0000:00:1f.2: reg 0x24: [mem 0xf3236000-0xf32367ff]
[ 0.202118] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.202161] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[ 0.202173] pci 0000:00:1f.3: reg 0x10: [mem 0xf3235000-0xf32350ff 64bit]
[ 0.202190] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
[ 0.202273] pci 0000:01:00.0: [10de:11c0] type 00 class 0x030000
[ 0.202282] pci 0000:01:00.0: reg 0x10: [mem 0xf2000000-0xf2ffffff]
[ 0.202291] pci 0000:01:00.0: reg 0x14: [mem 0xe8000000-0xefffffff 64bit pref]
[ 0.202300] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.202306] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.202312] pci 0000:01:00.0: reg 0x30: [mem 0xf3000000-0xf307ffff pref]
[ 0.202361] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.202388] pci 0000:01:00.1: [10de:0e0b] type 00 class 0x040300
[ 0.202397] pci 0000:01:00.1: reg 0x10: [mem 0xf3080000-0xf3083fff]
[ 0.208685] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.208687] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.208689] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf30fffff]
[ 0.208737] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.208807] pci 0000:03:00.0: [8086:244e] type 01 class 0x060401
[ 0.208933] pci 0000:03:00.0: supports D1 D2
[ 0.208934] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.208954] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.208973] pci 0000:00:1c.3: PCI bridge to [bus 03-04] (subtractive decode)
[ 0.208977] pci 0000:00:1c.3: bridge window [mem 0xf3100000-0xf31fffff]
[ 0.208981] pci 0000:00:1c.3: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.208982] pci 0000:00:1c.3: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.208983] pci 0000:00:1c.3: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.208984] pci 0000:00:1c.3: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.208985] pci 0000:00:1c.3: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.208986] pci 0000:00:1c.3: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.208987] pci 0000:00:1c.3: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.208988] pci 0000:00:1c.3: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 0.208989] pci 0000:00:1c.3: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[ 0.208990] pci 0000:00:1c.3: bridge window [mem 0xd0000000-0xfeafffff] (subtractive decode)
[ 0.209061] pci 0000:04:00.0: [168c:002d] type 00 class 0x028000
[ 0.209095] pci 0000:04:00.0: reg 0x10: [mem 0xf3100000-0xf310ffff]
[ 0.209351] pci 0000:03:00.0: PCI bridge to [bus 04] (subtractive decode)
[ 0.209364] pci 0000:03:00.0: bridge window [mem 0xf3100000-0xf31fffff]
[ 0.209373] pci 0000:03:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[ 0.209374] pci 0000:03:00.0: bridge window [mem 0xf3100000-0xf31fffff] (subtractive decode)
[ 0.209375] pci 0000:03:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[ 0.209376] pci 0000:03:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[ 0.209377] pci 0000:03:00.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.209378] pci 0000:03:00.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.209379] pci 0000:03:00.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.209380] pci 0000:03:00.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.209381] pci 0000:03:00.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.209382] pci 0000:03:00.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.209383] pci 0000:03:00.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.209384] pci 0000:03:00.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 0.209385] pci 0000:03:00.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[ 0.209386] pci 0000:03:00.0: bridge window [mem 0xd0000000-0xfeafffff] (subtractive decode)
[ 0.209408] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[ 0.209784] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.209814] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.209842] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.209869] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.209897] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.209925] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.209954] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.209982] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.210114] ACPI: Enabled 4 GPEs in block 00 to 3F
[ 0.210172] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.210173] vgaarb: loaded
[ 0.210173] vgaarb: bridge control possible 0000:01:00.0
[ 0.210188] PCI: Using ACPI for IRQ routing
[ 0.211404] PCI: pci_cache_line_size set to 64 bytes
[ 0.211442] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.211443] e820: reserve RAM buffer [mem 0xbb232000-0xbbffffff]
[ 0.211444] e820: reserve RAM buffer [mem 0xbc248000-0xbfffffff]
[ 0.211445] e820: reserve RAM buffer [mem 0xce79a000-0xcfffffff]
[ 0.211446] e820: reserve RAM buffer [mem 0xcf800000-0xcfffffff]
[ 0.211446] e820: reserve RAM buffer [mem 0x22e000000-0x22fffffff]
[ 0.211499] NetLabel: Initializing
[ 0.211500] NetLabel: domain hash size = 128
[ 0.211500] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.211507] NetLabel: unlabeled traffic allowed by default
[ 0.211519] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.211523] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.213540] Switched to clocksource hpet
[ 0.216475] pnp: PnP ACPI init
[ 0.216483] ACPI: bus type PNP registered
[ 0.216524] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.216527] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.216533] pnp 00:01: [dma 4]
[ 0.216544] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.216555] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.216614] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.216684] system 00:04: [io 0x0680-0x069f] has been reserved
[ 0.216686] system 00:04: [io 0xffff] has been reserved
[ 0.216687] system 00:04: [io 0xffff] has been reserved
[ 0.216688] system 00:04: [io 0xffff] has been reserved
[ 0.216689] system 00:04: [io 0x1c00-0x1cfe] has been reserved
[ 0.216690] system 00:04: [io 0x1d00-0x1dfe] has been reserved
[ 0.216691] system 00:04: [io 0x1e00-0x1efe] has been reserved
[ 0.216692] system 00:04: [io 0x1f00-0x1ffe] has been reserved
[ 0.216693] system 00:04: [io 0x1800-0x18fe] could not be reserved
[ 0.216695] system 00:04: [io 0x164e-0x164f] has been reserved
[ 0.216696] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.216715] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.216745] system 00:06: [io 0x1854-0x1857] has been reserved
[ 0.216746] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.216822] system 00:07: [io 0x0a00-0x0a0f] has been reserved
[ 0.216823] system 00:07: [io 0x0a30-0x0a3f] has been reserved
[ 0.216824] system 00:07: [io 0x0a20-0x0a2f] has been reserved
[ 0.216825] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.216983] pnp 00:08: [dma 0 disabled]
[ 0.217013] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.217187] pnp 00:09: [dma 0 disabled]
[ 0.217255] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.217285] system 00:0a: [io 0x04d0-0x04d1] has been reserved
[ 0.217286] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.217303] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.217561] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.217562] system 00:0c: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.217563] system 00:0c: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.217564] system 00:0c: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.217566] system 00:0c: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.217567] system 00:0c: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.217568] system 00:0c: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.217569] system 00:0c: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.217570] system 00:0c: [mem 0xff000000-0xffffffff] has been reserved
[ 0.217572] system 00:0c: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.217573] system 00:0c: [mem 0xf7fef000-0xf7feffff] has been reserved
[ 0.217574] system 00:0c: [mem 0xf7ff0000-0xf7ff0fff] has been reserved
[ 0.217575] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.217728] pnp: PnP ACPI: found 13 devices
[ 0.217729] ACPI: bus type PNP unregistered
[ 0.223413] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.223415] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.223417] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf30fffff]
[ 0.223421] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.223429] pci 0000:03:00.0: PCI bridge to [bus 04]
[ 0.223436] pci 0000:03:00.0: bridge window [mem 0xf3100000-0xf31fffff]
[ 0.223448] pci 0000:00:1c.3: PCI bridge to [bus 03-04]
[ 0.223452] pci 0000:00:1c.3: bridge window [mem 0xf3100000-0xf31fffff]
[ 0.223458] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.223459] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.223460] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.223461] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.223462] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.223463] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.223464] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[ 0.223465] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[ 0.223466] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[ 0.223467] pci_bus 0000:00: resource 13 [mem 0xd0000000-0xfeafffff]
[ 0.223468] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.223469] pci_bus 0000:01: resource 1 [mem 0xe8000000-0xf30fffff]
[ 0.223470] pci_bus 0000:03: resource 1 [mem 0xf3100000-0xf31fffff]
[ 0.223471] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.223472] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.223473] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.223474] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.223475] pci_bus 0000:03: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.223476] pci_bus 0000:03: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.223477] pci_bus 0000:03: resource 10 [mem 0x000dc000-0x000dffff]
[ 0.223478] pci_bus 0000:03: resource 11 [mem 0x000e0000-0x000e3fff]
[ 0.223479] pci_bus 0000:03: resource 12 [mem 0x000e4000-0x000e7fff]
[ 0.223480] pci_bus 0000:03: resource 13 [mem 0xd0000000-0xfeafffff]
[ 0.223481] pci_bus 0000:04: resource 1 [mem 0xf3100000-0xf31fffff]
[ 0.223482] pci_bus 0000:04: resource 5 [mem 0xf3100000-0xf31fffff]
[ 0.223483] pci_bus 0000:04: resource 8 [io 0x0000-0x0cf7]
[ 0.223484] pci_bus 0000:04: resource 9 [io 0x0d00-0xffff]
[ 0.223485] pci_bus 0000:04: resource 10 [mem 0x000a0000-0x000bffff]
[ 0.223486] pci_bus 0000:04: resource 11 [mem 0x000d0000-0x000d3fff]
[ 0.223487] pci_bus 0000:04: resource 12 [mem 0x000d4000-0x000d7fff]
[ 0.223488] pci_bus 0000:04: resource 13 [mem 0x000d8000-0x000dbfff]
[ 0.223489] pci_bus 0000:04: resource 14 [mem 0x000dc000-0x000dffff]
[ 0.223490] pci_bus 0000:04: resource 15 [mem 0x000e0000-0x000e3fff]
[ 0.223491] pci_bus 0000:04: resource 16 [mem 0x000e4000-0x000e7fff]
[ 0.223492] pci_bus 0000:04: resource 17 [mem 0xd0000000-0xfeafffff]
[ 0.223506] NET: Registered protocol family 2
[ 0.223609] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.223730] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.223895] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.223910] TCP: reno registered
[ 0.223917] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.223944] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.223988] NET: Registered protocol family 1
[ 0.256980] pci 0000:01:00.0: Boot video device
[ 0.256994] PCI: CLS 64 bytes, default 64
[ 0.257020] Unpacking initramfs...
[ 0.294705] Freeing initrd memory: 3168K (ffff8800379c0000 - ffff880037cd8000)
[ 0.294716] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.294717] software IO TLB [mem 0xca79a000-0xce79a000] (64MB) mapped at [ffff8800ca79a000-ffff8800ce799fff]
[ 0.294842] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[ 0.294863] Scanning for low memory corruption every 60 seconds
[ 0.294994] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.303763] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.304553] zbud: loaded
[ 0.304660] VFS: Disk quotas dquot_6.5.2
[ 0.304681] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.304745] msgmni has been set to 15851
[ 0.304773] Key type big_key registered
[ 0.304856] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.304885] io scheduler noop registered
[ 0.304886] io scheduler deadline registered
[ 0.304909] io scheduler cfq registered (default)
[ 0.305005] pcieport 0000:00:01.0: irq 41 for MSI/MSI-X
[ 0.305115] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.305124] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.305139] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
[ 0.305140] vesafb: scrolling: redraw
[ 0.305141] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.305727] vesafb: framebuffer at 0xf1000000, mapped to 0xffffc90004e80000, using 8128k, total 8128k
[ 0.421564] Console: switching to colour frame buffer device 240x67
[ 0.536923] fb0: VESA VGA frame buffer device
[ 0.536932] intel_idle: MWAIT substates: 0x42120
[ 0.536933] intel_idle: v0.4 model 0x3C
[ 0.536934] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.537045] GHES: HEST is not enabled!
[ 0.537073] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.557614] 00:08: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.578155] 0000:00:16.3: ttyS1 at I/O 0xf0a0 (irq = 19, base_baud = 115200) is a 16550A
[ 0.578323] Linux agpgart interface v0.103
[ 0.578347] rtc_cmos 00:05: RTC can wake from S4
[ 0.578460] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.578493] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.578499] Intel P-state driver initializing.
[ 0.578506] Intel pstate controlling: cpu 0
[ 0.578516] Intel pstate controlling: cpu 1
[ 0.578525] Intel pstate controlling: cpu 2
[ 0.578533] Intel pstate controlling: cpu 3
[ 0.578547] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.578599] TCP: cubic registered
[ 0.578655] NET: Registered protocol family 10
[ 0.578791] NET: Registered protocol family 17
[ 0.579032] registered taskstats version 1
[ 0.579379] Magic number: 2:735:176
[ 0.579408] acpi device:39: hash matches
[ 0.579414] acpi device:0c: hash matches
[ 0.579465] rtc_cmos 00:05: setting system clock to 2014-06-26 11:10:28 UTC (1403781028)
[ 0.579516] PM: Hibernation image not present or could not be loaded.
[ 0.579998] Freeing unused kernel memory: 1116K (ffffffff818df000 - ffffffff819f6000)
[ 0.579999] Write protecting the kernel read-only data: 8192k
[ 0.581473] Freeing unused kernel memory: 912K (ffff88000151c000 - ffff880001600000)
[ 0.582105] Freeing unused kernel memory: 404K (ffff88000179b000 - ffff880001800000)
[ 0.586339] random: systemd-tmpfile urandom read with 65 bits of entropy available
[ 0.587122] systemd-udevd[58]: starting version 213
[ 0.595903] ACPI: bus type USB registered
[ 0.595926] usbcore: registered new interface driver usbfs
[ 0.595933] usbcore: registered new interface driver hub
[ 0.596405] usbcore: registered new device driver usb
[ 0.596719] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.596815] ehci-pci: EHCI PCI platform driver
[ 0.596919] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.596924] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.596934] ehci-pci 0000:00:1a.0: debug port 2
[ 0.597169] SCSI subsystem initialized
[ 0.598545] libata version 3.00 loaded.
[ 0.600825] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.600841] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf3238000
[ 0.600943] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.601297] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.601307] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.610538] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.610659] hub 1-0:1.0: USB hub found
[ 0.610663] hub 1-0:1.0: 2 ports detected
[ 0.610845] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.610849] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.610858] ehci-pci 0000:00:1d.0: debug port 2
[ 0.614752] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.614762] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf3237000
[ 0.623945] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.624126] hub 2-0:1.0: USB hub found
[ 0.624130] hub 2-0:1.0: 2 ports detected
[ 0.624306] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.624310] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.624428] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.624442] xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X
[ 0.624616] hub 3-0:1.0: USB hub found
[ 0.624632] hub 3-0:1.0: 12 ports detected
[ 0.625905] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.625908] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 0.626071] hub 4-0:1.0: USB hub found
[ 0.626082] hub 4-0:1.0: 6 ports detected
[ 0.626739] ahci 0000:00:1f.2: version 3.0
[ 0.626827] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 0.626869] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
[ 0.626871] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
[ 0.631106] scsi0 : ahci
[ 0.631237] scsi1 : ahci
[ 0.631544] scsi2 : ahci
[ 0.631847] scsi3 : ahci
[ 0.632048] scsi4 : ahci
[ 0.632210] scsi5 : ahci
[ 0.632245] ata1: SATA max UDMA/133 abar m2048@0xf3236000 port 0xf3236100 irq 43
[ 0.632247] ata2: SATA max UDMA/133 abar m2048@0xf3236000 port 0xf3236180 irq 43
[ 0.632247] ata3: DUMMY
[ 0.632248] ata4: DUMMY
[ 0.632249] ata5: DUMMY
[ 0.632249] ata6: DUMMY
[ 0.917514] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 0.950851] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.950865] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.951513] ata2.00: ATA-9: WDC WD10EZEX-08M2NA0, 01.01A01, max UDMA/100
[ 0.951515] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.952272] ata2.00: configured for UDMA/100
[ 0.965729] ata1.00: ATA-8: KINGSTON SV300S37A120G, 527ABBF0, max UDMA/133
[ 0.965731] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.975526] ata1.00: configured for UDMA/133
[ 0.975682] scsi 0:0:0:0: Direct-Access ATA KINGSTON SV300S3 527A PQ: 0 ANSI: 5
[ 0.976133] scsi 1:0:0:0: Direct-Access ATA WDC WD10EZEX-08M 01.0 PQ: 0 ANSI: 5
[ 0.979123] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 0.979131] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 0.979133] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 0.979142] sd 0:0:0:0: [sda] Write Protect is off
[ 0.979144] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.979150] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.979241] sd 1:0:0:0: [sdb] Write Protect is off
[ 0.979242] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 0.979260] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.979452] sda: sda1 sda2 sda3
[ 0.979690] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.992405] sdb: sdb1 sdb2 sdb3 sdb4
[ 0.992837] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.041522] hub 1-1:1.0: USB hub found
[ 1.041639] hub 1-1:1.0: 6 ports detected
[ 1.147659] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.271718] hub 2-1:1.0: USB hub found
[ 1.271809] hub 2-1:1.0: 6 ports detected
[ 1.297769] tsc: Refined TSC clocksource calibration: 3192.606 MHz
[ 1.431263] usb 3-5: new low-speed USB device number 2 using xhci_hcd
[ 1.537046] random: nonblocking pool is initialized
[ 1.556157] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 1.587430] systemd[1]: systemd 214 running in system mode. (+PAM -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ +SECCOMP -APPARMOR)
[ 1.587513] systemd[1]: Detected architecture 'x86-64'.
[ 1.588205] systemd[1]: Set hostname to <XSign>.
[ 1.614195] usb 3-5: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.626104] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 1.626132] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 1.626139] systemd[1]: Starting Remote File Systems.
[ 1.626581] systemd[1]: Reached target Remote File Systems.
[ 1.626590] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 1.626605] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 1.626610] systemd[1]: Starting Paths.
[ 1.626945] systemd[1]: Reached target Paths.
[ 1.626950] systemd[1]: Starting Encrypted Volumes.
[ 1.627363] systemd[1]: Reached target Encrypted Volumes.
[ 1.627373] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 1.628175] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 1.628182] systemd[1]: Expecting device dev-sdb4.device...
[ 1.628567] systemd[1]: Expecting device dev-sda1.device...
[ 1.628950] systemd[1]: Expecting device dev-sdb3.device...
[ 1.629332] systemd[1]: Starting Root Slice.
[ 1.632141] systemd[1]: Created slice Root Slice.
[ 1.632148] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 1.632697] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 1.632703] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 1.633212] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 1.633217] systemd[1]: Starting Delayed Shutdown Socket.
[ 1.633664] systemd[1]: Listening on Delayed Shutdown Socket.
[ 1.633669] systemd[1]: Starting Journal Socket (/dev/log).
[ 1.634133] systemd[1]: Listening on Journal Socket (/dev/log).
[ 1.634139] systemd[1]: Starting udev Control Socket.
[ 1.634558] systemd[1]: Listening on udev Control Socket.
[ 1.634564] systemd[1]: Starting udev Kernel Socket.
[ 1.634987] systemd[1]: Listening on udev Kernel Socket.
[ 1.634993] systemd[1]: Starting LVM2 metadata daemon socket.
[ 1.635469] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 1.635474] systemd[1]: Starting User and Session Slice.
[ 1.635984] systemd[1]: Created slice User and Session Slice.
[ 1.635990] systemd[1]: Starting Journal Socket.
[ 1.636382] systemd[1]: Listening on Journal Socket.
[ 1.636391] systemd[1]: Starting System Slice.
[ 1.636828] systemd[1]: Created slice System Slice.
[ 1.636837] systemd[1]: Started File System Check on Root Device.
[ 1.636841] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 1.637390] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 1.637397] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 1.638043] systemd[1]: Mounting Temporary Directory...
[ 1.639117] systemd[1]: Mounting Debug File System...
[ 1.639740] systemd[1]: Starting udev Coldplug all Devices...
[ 1.640987] systemd[1]: Started Load Kernel Modules.
[ 1.640998] systemd[1]: Mounted FUSE Control File System.
[ 1.641689] systemd[1]: Starting Apply Kernel Variables...
[ 1.642275] systemd[1]: Mounting POSIX Message Queue File System...
[ 1.642976] systemd[1]: Starting Setup Virtual Console...
[ 1.644065] EXT4-fs (sda2): re-mounted. Opts: data=ordered
[ 1.645742] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 1.646672] systemd[1]: Mounting Huge Pages File System...
[ 1.647253] systemd[1]: Mounting Configuration File System...
[ 1.648402] systemd[1]: Started Set Up Additional Binary Formats.
[ 1.648413] systemd[1]: Starting system-getty.slice.
[ 1.649035] systemd[1]: Created slice system-getty.slice.
[ 1.649044] systemd[1]: Starting Journal Service...
[ 1.649940] systemd[1]: Started Journal Service.
[ 1.684590] systemd-udevd[160]: starting version 214
[ 1.714384] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 1.714388] ACPI: Power Button [PWRB]
[ 1.714417] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.714419] ACPI: Power Button [PWRF]
[ 1.716491] pps_core: LinuxPPS API ver. 1 registered
[ 1.716493] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[ 1.716760] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.717286] PTP clock support registered
[ 1.718023] mei_me 0000:00:16.0: irq 44 for MSI/MSI-X
[ 1.721435] parport_pc 00:09: reported by Plug and Play ACPI
[ 1.721481] parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE]
[ 1.721541] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.721542] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
[ 1.721903] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.721917] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 1.748190] ACPI: Fan [FAN0] (off)
[ 1.748215] ACPI: Fan [FAN1] (off)
[ 1.748234] ACPI: Fan [FAN2] (off)
[ 1.748255] ACPI: Fan [FAN3] (off)
[ 1.748276] ACPI: Fan [FAN4] (off)
[ 1.749478] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.749479] ACPI: Thermal Zone [TZ00] (28 C)
[ 1.749609] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.749610] ACPI: Thermal Zone [TZ01] (30 C)
[ 1.757876] [drm] Initialized drm 1.1.0 20060810
[ 1.767187] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 1.774098] cfg80211: Calling CRDA to update world regulatory domain
[ 1.774823] usb 3-6: new full-speed USB device number 3 using xhci_hcd
[ 1.795673] Adding 16002224k swap on /dev/sdb4. Priority:-1 extents:1 across:16002224k FS
[ 1.801517] microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x9
[ 1.805001] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 1.806877] microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x9
[ 1.806888] microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x9
[ 1.806895] microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x9
[ 1.806928] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 1.823570] AVX2 version of gcm_enc/dec engaged.
[ 1.849773] nvidia: module license 'NVIDIA' taints kernel.
[ 1.849774] Disabling lock debugging due to kernel taint
[ 1.856456] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[ 1.856549] ppdev: user-space parallel port driver
[ 1.856785] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
[ 1.856789] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 337.25 Tue May 27 11:05:28 PDT 2014
[ 1.993532] e1000e 0000:00:19.0 eth0: registered PHC clock
[ 1.993533] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 74:d4:35:86:a4:73
[ 1.993534] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 1.993584] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
[ 1.993718] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 1.993806] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 1.993810] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 1.993950] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
[ 1.994002] ACPI Warning: SystemIO range 0x000000000000f000-0x000000000000f01f conflicts with OpRegion 0x000000000000f000-0x000000000000f00f (\_SB_.PCI0.SBUS.SMBI) (20140214/utaddress-258)
[ 1.994003] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.996461] iTCO_vendor_support: vendor-support=0
[ 1.996939] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 1.996968] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[ 2.005457] sound hdaudioC0D2: autoconfig: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[ 2.005458] sound hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 2.005459] sound hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 2.005459] sound hdaudioC0D2: mono: mono_out=0x0
[ 2.005460] sound hdaudioC0D2: dig-out=0x11/0x1e
[ 2.005460] sound hdaudioC0D2: inputs:
[ 2.005461] sound hdaudioC0D2: Rear Mic=0x18
[ 2.005462] sound hdaudioC0D2: Front Mic=0x19
[ 2.005462] sound hdaudioC0D2: Line=0x1a
[ 2.005463] sound hdaudioC0D2: CD=0x1c
[ 2.005463] sound hdaudioC0D2: dig-in=0x1f
[ 2.008421] systemd-udevd[162]: renamed network interface eth0 to eno1
[ 2.019322] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D2/input6
[ 2.020297] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 2.020335] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 2.020370] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 2.020403] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 2.020435] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 2.020468] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 2.026197] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: data=ordered
[ 2.132907] systemd-journald[153]: Received request to flush runtime journal from PID 1
[ 2.157519] ath: EEPROM regdomain: 0x809c
[ 2.157520] ath: EEPROM indicates we should expect a country code
[ 2.157520] ath: doing EEPROM country->regdmn map search
[ 2.157520] ath: country maps to regdmn code: 0x52
[ 2.157521] ath: Country alpha2 being used: CN
[ 2.157521] ath: Regpair used: 0x52
[ 2.160431] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 2.160562] ieee80211 phy0: Atheros AR9287 Rev:2 mem=0xffffc90006800000, irq=19
[ 2.181947] systemd-udevd[162]: renamed network interface wlan0 to wlp4s0
[ 2.298729] Switched to clocksource tsc
[ 2.376487] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[ 2.376547] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[ 2.376591] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
[ 2.376632] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
[ 2.560514] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[ 3.062601] nvidia 0000:01:00.0: irq 47 for MSI/MSI-X
[ 3.592415] NVRM: Your system is not currently configured to drive a VGA console
[ 3.592417] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[ 3.592418] NVRM: requires the use of a text-mode VGA console. Use of other console
[ 3.592419] NVRM: drivers including, but not limited to, vesafb, may result in
[ 3.592420] NVRM: corruption and stability problems, and is not supported.
[ 7.032503] usb 3-6: unable to read config index 0 descriptor/all
[ 7.032509] usb 3-6: can't read configurations, error -110
[ 7.299384] usb 3-11: new high-speed USB device number 5 using xhci_hcd
[ 7.769759] usb 3-6: new full-speed USB device number 6 using xhci_hcd
[ 7.973941] hidraw: raw HID events driver (C) Jiri Kosina
[ 7.986288] usbcore: registered new interface driver usbhid
[ 7.986290] usbhid: USB HID core driver
[ 7.987065] input: HID 046a:0011 as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.0/0003:046A:0011.0001/input/input17
[ 7.987234] hid-generic 0003:046A:0011.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 046a:0011] on usb-0000:00:14.0-5/input0
[ 7.987314] input: Razer Razer DeathAdder as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.0/0003:1532:0016.0002/input/input18
[ 7.987439] hid-generic 0003:1532:0016.0002: input,hidraw1: USB HID v1.11 Mouse [Razer Razer DeathAdder] on usb-0000:00:14.0-6/input0
[ 7.989050] mousedev: PS/2 mouse device common for all mice
[ 8.124996] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 8.136818] usb 3-11: reset high-speed USB device number 5 using xhci_hcd
[ 8.136826] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 4.
[ 8.136827] usb 3-11: hub failed to enable device, error -22
[ 8.226730] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 8.226799] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 8.296772] usb 3-11: reset high-speed USB device number 5 using xhci_hcd
[ 8.296839] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 4.
[ 8.296841] usb 3-11: hub failed to enable device, error -22
[ 8.456902] usb 3-11: reset high-speed USB device number 5 using xhci_hcd
[ 8.481367] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880219f95848
[ 8.481369] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880219f95800
[ 8.481370] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880219f95890
[ 8.481371] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880219f958d8
[ 8.481372] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880219f95920
[ 8.481373] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880219f95968
[ 8.481374] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880219f959b0
[ 8.481751] ieee80211 phy1: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[ 8.491510] ieee80211 phy1: rt2x00_set_rf: Info - RF chipset 0005 detected
[ 8.491667] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[ 8.491846] usbcore: registered new interface driver rt2800usb
[ 8.527024] systemd-udevd[163]: renamed network interface wlan0 to wlp0s20u11
[ 37.746771] fuse init (API version 7.23)
[ 162.364940] ieee80211 phy1: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[ 162.368409] ieee80211 phy1: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
[ 162.630888] IPv6: ADDRCONF(NETDEV_UP): wlp0s20u11: link is not ready
[ 165.603287] IPv6: ADDRCONF(NETDEV_UP): wlp0s20u11: link is not ready
[ 165.711742] e1000e: eno1 NIC Link is Down
[ 165.815617] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 165.917212] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 165.917299] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 166.200400] IPv6: ADDRCONF(NETDEV_UP): wlp0s20u11: link is not ready
[ 169.526968] wlp0s20u11: authenticate with f8:d1:11:e0:43:42
[ 169.559811] wlp0s20u11: send auth to f8:d1:11:e0:43:42 (try 1/3)
[ 169.561558] wlp0s20u11: authenticated
[ 169.563460] wlp0s20u11: associate with f8:d1:11:e0:43:42 (try 1/3)
[ 169.566987] wlp0s20u11: RX AssocResp from f8:d1:11:e0:43:42 (capab=0x431 status=0 aid=2)
[ 169.569703] wlp0s20u11: associated
[ 169.569713] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20u11: link becomes ready
[ 169.601748] wlp0s20u11: Limiting TX power to 20 (20 - 0) dBm as advertised by f8:d1:11:e0:43:42

The computer can not find any hard disk

Similar Messages

Maybe you are looking for