"The computer started using Windows installation media." Installing windows 10 technical preview on virtual machine

The computer started using Windows installation media. Remove the installation media and restart your computer so that Windows starts normally. The, insert the installation media and restart the upgrade. (Do not
select |custom[advanced]| to perform an upgrade. |custom[advanced]| installs a new copy of Windows and deletes your programs and settings.)
That is the Compatibility report that I'm getting when trying to install onto parallels 10 Version 10.2.0 (28956) on my mid 2009 Macbook 13. This happens just after I click 'Install now' and accept the T&Cs.
I am selecting 'Upgrade: Install Windows and keep files, setting and applications'.
I am upgrading from the Windows Technical Preview Evaluation Copy. Build 9879.
I have updated my EFI and tried a few restarts and am booting from a CD. No luck yet.
Any help would be muchos appreciated.

Hi bitofagiggle,
I am not familiar with mac machines, based on what I know, there should be more settigns that need to be configured before the installation of Windows, I suggest you contact the manufacturer for further help regarding how to make Windows to upgrade smoothly.
The below is some articles for reference:
Install
Windows 8.1 on a Mac
Your Manufacturer website:
How to install Windows using Boot Camp
Please note: Since this website is not hosted by Microsoft, the information may change without notice. Microsoft does not guarantee the accuracy of this information.
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

Bootcamp windows installation not installing Windows 7

Hi
I recently installed Windows 7 on my 6months old macbook pro 17 via bootcamp 2,0.
I installed the audio from a driver which I got at realtek.com
But on my previous bootcamp partitions(WIndows XP) I just installed and then booted in windows from my Mac OS X Install DVD(windows support) and everything got installed - including the trackpad(mouse touch pad).
But when I put in the installation DVD in Win 7 I can only choose to install some kind of Macbook Air DVD and network sharing program, which Ive never seen before(I dont have an MB Air either?:S).
My two mac discs that came with my mac is the ''17-inch Macbook Pro Mac OS X Install DVD'' AND ''17-inch Macbook Pro Application Install DVD''.
How do I install the bootcamp drivers, which I need to install in order to get WINDOWS 7 to work properly in my bootcamp partition??
Please send link to drivers etc.

Go to your Apple icon in the top left hand corner and click then choose About this Mac. If the version is 10.5. 0 to 10.5.8 then it’s Leopard. If it’s 10.6.0 to 10.6.2 then it’s Snow Leopard.
What you need is Snow Leopard. If your Mac is 6 months old and you have Leopard then I think you are entitled to a free or a reduced price upgrade.

HT5639 i use boot camp to install windows 8.1 but in the middle of the installation it is stop,how can i install the windows again?

i use boot camp to install windows 8.1on my mac but in the middle of the installation it is stop,how can i install the windows again?
why it`s stop?

What is your exact machine and what's the error

Installed Adobe dlm add-on and now Firfox will not open. I see the process starting in Task Manager but no window opens. Unistalled Firefox then re-installed but still no luck. HELP ME!

''Duplicate post, continue here - [https://support.mozilla.com/en-US/questions/793259]''
I installed Adobe dlm add-on and now Firefox will not open. I see the process starting in Task Manager but no window opens. Unistalled Firefox then re-installed but still no luck. HELP ME! I do not want to use IE! I presume it has something to do with Adobe DLM as ever since then it is not working.

I had this problem for a couple weeks as well and it was extremely frustrating considering we use firefox for all our company tasks. Here is the solution:
First of all if you have no bookmarks you want to save, then go directly to step 7. If you want to save your bookmarks first, then follow these steps.
1. Shut down the computer
2. Reboot and open firefox
3. Go to Task Manager, right click firefox.exe, and click END PROCESS TREE
4. WAIT 30 SECONDS! Then Double-click the shortcut to try and open firefox again
5.Repeat steps 3 and 4 until firefox finally opens (trust me, eventually it will)
6. Once it finally opens, backup your bookmarks,
7. Download a copy of firefox from there website
8. Uninstall from programs menu and make sure to check the box REMOVE ALL COMPONENTS
9. install the new copy and BOOM! it works
If it doesn't work, you're an idiot. If you don't want to reinstall firefox, then you're out of luck. Good Luck!

I had creative cloud installed in a parallels deskto virtual machine on my mac, I delete the virtual machine without deactivate the creative cloud. after reinstall a new VM running windows 8.1. pro 64 bits, I downloaded the creative cloud installer but it

I had creative cloud installed in a parallels deskto virtual machine on my mac, I delete the virtual machine without deactivate the creative cloud. after reinstall a new VM running windows 8.1. pro 64 bits, I downloaded the creative cloud installer but it does not install ang give an Error code 72, it is assuming that I already are using the Creative cloud in 2 computer, but itis no the case, how to solve this situation?

Dave: I did the Microsoft Update two days before this happened, and rebooted as required. I just created a new restore point and lauched Creative Cloud. Now I get the famous white screen:
It just sits and spins (been 10 minutes now).
Fortunately, I saved away this command (which I've had to use 4 or 5 times already):
del %USERPROFILE%\AppData\Local\Adobe\OOBE\opm.db
Unfortunately now, I get this (even after closing the above window):
The process cannot access the file because it is being used by another process.
So I killed everything that said "Adobe" in the task manager and this time, the command succeeded.
Fortunately, the current apps seem to still work. I can't seem to find the "Creative Cloud" app in the applications on my system, but I launched Photoshop CC, told it to look for updates, and got a list of the 5 prgorams that need updates in the Adobe Application manager:
I will proceed with the updates, holding my breath.

Using Boot Camp to Install Windows 7. Keep getting error message "Installer Disk Not Found"

I'm partially throught the Boot Camp set-up process and keep getting the same error message when trying to install Windows. The disk is in the drive, not sure why it's not recognizing it.

I had this problem on my brand-new Mac Pro, but fixed it in my case by burning another copy of the installer disc (from the official download image, not a pirate copy lol) at a SLOWER speed, rather than allowing it to burn at the "maximum possible" setting. This gives the laser more time to properly record, but it didn't perceptually increase the time it took to burn the disc.
I speculate that error-checking is too stringent, but weak; that is, not intelligent enough to correct any read errors. Of course, Apple's test configurations are likely using commercially-produced off-the-shelf discs rather than burned from downloads or they know to never use max speed out of habit.

HT3964 I just upgraded to Snow Leopard then Lion and the computer shut down after installation. Now when it starts up it gets as far as the apple icon and then shuts down again

I just upgraded to Snow Leopard then Lion and the computer shut down after installation.
Now when it starts up it gets as far as the apple icon and then shuts down again
whenever I turn it on it loads that far and then closes.
HELP!

Restore your bootable backup/clone or Time Machine backup of Snow Leopard, launch Disk Utility from the install disc, repair the boot volume, and reinstall Lion.

The computer I use at work is a PC. I know you are allowed to install the programs on two computers, one work computer and one laptop. My laptop is a Mac. Is it possible to install the second copy on a Mac?

I'm not sure if I'm in the right forum for this question, but I don't know where else to ask about installing on cross platforms. So, the computer I use at work is a PC. I know you are allowed to install the programs on two computers, one work computer and one laptop. My laptop is a Mac. Is it possible to install the second copy on a Mac?

Which Adobe product exactly?
Cloud: yes.
Creative Suite: no.

Whenever i m trying to install firefox the error will come that is previous firefox want complete uninstalation its required to restart the computer when its restart its not installed tell me why

whenever i m trying to install firefox the error will come that is previous firefox want complete uninstalation its required to restart the computer when its restart its not installed tell me why in

I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

How can I return to use OSX (Yosemite) after installing Windows 8.1?

How can I return to use OSX (Yosemite) after installing Windows 8.1?
I cannot find Boot Camp on my iMac (late 2013) with windows installed. So I downloaded it, but I cannot run it because of an error (x64...). I tried to use my USB stick with bootcamp installed but nothing. When I turn my iMac on it starts automatically with windows. I tried to search it, but I found only the setup and it doesn't work. How can I get back to my APPLE iMac? How can I use OSX?
Excuse me for the (maybe) uncorrect language, I speak Italian.

Hello!
You can start your Mac up with the [alt] (sometimes [option]) key pressed and you will get the Startup Manager.

Using Boot Camp to install Windows XP: problems with display going blank

I have a new Mac mini (early 2009) connected to an older NEC MultiSync LCD (VGA only) display through a KVM.
I initially used the Apple Mini DisplayPort to VGA adapter to make the display connection.
All worked fine with Mac OS X, but when I attempted to use Boot Camp to install Windows XP (Home), the display would go blank with the display saying "no signal" at some point during the install and I couldn't get the mini's display back without power cycling the mini. Numerous attempts at removing the Boot Camp partition, re-partitioning, and retrying resulted in nothing but frustration. I typically had to force the mini to boot from the OS X install DVD or Mac partition to make the mini usable again.
I have used my LCD display and KVM combination with a variety of computers running a variety of operating systems, including older Mac minis running both Mac OS X and XP, with no problems. And I intend to keep using it, so I wasn't going to assume the problem was there!
After noting that Apple had already released a [firmware update|http://support.apple.com/downloads/Mini_DisplayPort_to_VGA_FirmwareUpdate] for this adapter to address "[possible intermittent flickering and compatibility issues|http://support.apple.com/kb/HT3492]", I double checked that it was up to date--and it was. But, it made me suspicious that this adapter might have some more problems and be the source of the troubles I was experiencing.
So, I got an Apple Mini-DVI to VGA adapter and tried that.
No more display problems! Everything works fine with Mac OS X. Windows XP installed without so much as a flicker, and it works smoothly with my setup.
I'm curious if I'm the only one who was affected by this problem?

Restart your Mac while holding down the Alt/Option-key until you get to the Boot Selection Screen.
Choose to boot OSX.
Use the BootCamp Assistant to remove the Windows partition.
Go to System Preferences then Startup Volume and rest the default to be your OSX volume.
Reboot your Mac again.
Follow the instructions from here http://support.apple.com/kb/TS3173 and use the BootCamp Assistant again to install Windows 7
Stefan

Hello all.   Hope someone can help me. I recently downloaded some updates for my imac. Since doing this the computer starts up but I get no logon box. The home screen opens but I can't open any programs or files. I've tried rebooting, no joy. Help!!

Hello all..   I hope someone here can help. I recently downloaded some updates to my imac. Since then the computer starts but I get the home screen opening without the logon box.    I can't open any programs or files and if I click on the Safari tab it disappears from the dock. I've tried rebooting with no joy.
I contacted technical help at Apple and was told to hold down the ctrl and alt keys with two other keys, I think the S or P keys when powering up. This worked
and the computer seemed fine but now the problem has reappeared. Is there a way to removed downloaded updates from the computer or revert it to an earlier state?   Sorry for the long question. Hopefully one of you clever people can help.   Simon

Clntxwhtby wrote:
Hay thank you for your time . I do that every time I know I am online. It says that I am up to date . I have found that I have 10.4.11 version, and that my boot version is 10.6.2, and that my kernel version is 8.11.1.
I have a hard drive icon on my desktop that says 10.6.2....
I use to have iphoto, it doesnt open anymore, it says there is 1.2gigs on that disk.There are many things on here that are the same way. Where do I start?
It's always good to go with one thing at a time and stay focused on that. Let's start with the OS you're running. Click on the Apple menu > About This Mac. What does it say under Mac OS X version ?

Bluetooth no longer loads automatically when the computer starts

I have the Bluetooth Stack version 2.01.21.1. It was working fine. When the laptop booted up, the bluetooth mouse was automatically connected.
All of a sudden the icon no longer appears automatically in the system tray and so I have to manually connect the mouse each time
It is still listed in the startup menu on the desktop and it is still checked in startup in the msconfig.
How do I fix this?
Thanks in advance

I have just gotten off the phone with a microsoft tech who actually seems to have fixed this somewhat
He went to start/run to get to services.msc.
He chose "SSDP Discovery Services" which "enables discovery of
UPnP devices on your home network" and DISABLED it.
Go figure
The BT icon now appears in my system tray and starts up automatically when the computer starts.
I say somewhat because It still disconnects if left idle for a long period, which it did not do previously, but at least it is there when I log on.
I want to mention that I have a Dell, not a Toshiba (did not realize this forum was for Toshiba laptops rather than Toshiba software) but perhaps
you will find this information useful.
Also, at http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx you will find an autorun tool that lets you fix what is or is not
in the startup menus. It seems to work better than using msconfig which on my laptop was not making a difference as to what started up and what did not.
It is meant for IT professionals so I would not mess with it too much. However if you just check or uncheck in the startups for the BT manager you will
not do any damage.

Is it possible to use Boot Camp to install Windows on an external HD?

So I don't use up space on my internal hard drive, would it be possible to use Boot Camp to install Windows to an external hard drive?

Ok, so officially, you have to install it on your Mac's internal drive. Good, thanks for clearing that up.
I guess the only simple alternative to installing Windows on your Mac's internal drive is to buy another Mac, and install it on there instead I mean, you could have a Mac Mini or a MacBook, and have that running Windows under Boot Camp.

Pavilion dv6 - the search for WLAN doesnt exist after installing windows 7 ultimate

pavilion dv6 - the search for WLAN doesnt exist after installing windows 7 ultimate
after installing windows 7 my computer only displays the LAN on my quicklaunch bar and I can even search for open WLAN networks =(

Hi:
You probably need to install the wireless card driver.

"The computer started using Windows installation media." Installing windows 10 technical preview on virtual machine

Similar Messages

Maybe you are looking for