The condition record for use B can not be displayed

Hi gururs,
What does this message (number : VE896 ) mean ?
How to make it desapear ?
P.S : it's about output type for purchase orders.
This message is displayed when I click on : "Goto -> Determi analysis" in tcode ME22N.
Regards,
Bahia.

Hi
It means you are trying to veiw the executed condition record. System found the condition record for entered transactional data which you cannot see by clicking on it (when you see green record in condition analysis).
For given condition type -> and access sequence/ access - system shows the condition record that is determined. You can see its details by clicking the access which shows the message that condition record has been found with its determined parameters.
Ex: For batch determination I have set up one search strategy with a condition type (with access sequence). I created one condition record. When creating say sales order -batch determination takes place based on condition record parameters. System shows a green light for determined condition record. You cannot see its details - if you try to see then system issues a message like ''The condition record for use B can not be displayed''. If you want to see click on its immediate predecessor (access ).
Thanks

Similar Messages

While running dcdiag /test:dns getting Warning: The AAAA record for this DC was not found

DCDIAG /test:dns result is pested here.
C:\Users\administrator.SUD>dcdiag /test:dns
Directory Server Diagnosis
Performing initial setup:
   Trying to find home server...
   Home Server = MUM-ADS-01
   * Identified AD Forest.
   Done gathering initial info.
Doing initial required tests
   Testing server: Default-First-Site-Name\MUM-ADS-01
      Starting test: Connectivity
         ......................... MUM-ADS-01 passed test Connectivity
Doing primary tests
   Testing server: Default-First-Site-Name\MUM-ADS-01
      Starting test: DNS
         DNS Tests are running and not hung. Please wait a few minutes...
         ......................... MUM-ADS-01 passed test DNS
   Running partition tests on : ForestDnsZones
   Running partition tests on : DomainDnsZones
   Running partition tests on : Schema
   Running partition tests on : Configuration
   Running partition tests on : sud
   Running enterprise tests on : sud.in
      Starting test: DNS
         Test results for domain controllers:
            DC: MUM-ADS-01.sud.in
            Domain: sud.in
               TEST: Basic (Basc)
                  Warning: The AAAA record for this DC was not found
               TEST: Forwarders/Root hints (Forw)
                  Error: Root hints list has invalid root hint server:
                  a.root-servers.net. (198.41.0.4)
                  Error: Root hints list has invalid root hint server:
                  b.root-servers.net. (128.9.0.107)
                  Error: Root hints list has invalid root hint server:
                  c.root-servers.net. (192.33.4.12)
                  Error: Root hints list has invalid root hint server:
                  d.root-servers.net. (128.8.10.90)
                  Error: Root hints list has invalid root hint server:
                  e.root-servers.net. (192.203.230.10)
                  Error: Root hints list has invalid root hint server:
                  f.root-servers.net. (192.5.5.241)
                  Error: Root hints list has invalid root hint server:
                  g.root-servers.net. (192.112.36.4)
                  Error: Root hints list has invalid root hint server:
                  h.root-servers.net. (128.63.2.53)
                  Error: Root hints list has invalid root hint server:
                  i.root-servers.net. (192.36.148.17)
                  Error: Root hints list has invalid root hint server:
                  j.root-servers.net. (192.58.128.30)
                  Error: Root hints list has invalid root hint server:
                  k.root-servers.net. (193.0.14.129)
                  Error: Root hints list has invalid root hint server:
                  l.root-servers.net. (198.32.64.12)
                  Error: Root hints list has invalid root hint server:
                  m.root-servers.net. (202.12.27.33)
               TEST: Delegations (Del)
                  Error: DNS server: sud-ad.sud.in. IP:<Unavailable>
                  [Missing glue A record]
               TEST: Records registration (RReg)
                  Network Adapter
                  [00000006] Intel(R) PRO/1000 MT Network Connection:
                     Warning:
                     Missing AAAA record at DNS server 10.1.6.132:
                     MUM-ADS-01.sud.in
                     Warning:
                     Missing AAAA record at DNS server 10.1.6.132:
                     gc._msdcs.sud.in
                     Warning:
                     Missing AAAA record at DNS server 10.1.6.133:
                     MUM-ADS-01.sud.in
                     Warning:
                     Missing AAAA record at DNS server 10.1.6.133:
                     gc._msdcs.sud.in
               Warning: Record Registrations not found in some network adapters
         Summary of test results for DNS servers used by the above domain
         controllers:
            DNS server: 128.63.2.53 (h.root-servers.net.)
               1 test failure on this DNS server
               PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
S server 128.63.2.53
            DNS server: 128.8.10.90 (d.root-servers.net.)
               1 test failure on this DNS server
               PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
S server 128.8.10.90
            DNS server: 128.9.0.107 (b.root-servers.net.)
               1 test failure on this DNS server
               PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
S server 128.9.0.107
            DNS server: 192.112.36.4 (g.root-servers.net.)
               1 test failure on this DNS server
               PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
S server 192.112.36.4
            DNS server: 192.203.230.10 (e.root-servers.net.)
               1 test failure on this DNS server
               PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
S server 192.203.230.10
            DNS server: 192.33.4.12 (c.root-servers.net.)
               1 test failure on this DNS server
               PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
S server 192.33.4.12
            DNS server: 192.36.148.17 (i.root-servers.net.)
               1 test failure on this DNS server
               PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
S server 192.36.148.17
            DNS server: 192.5.5.241 (f.root-servers.net.)
               1 test failure on this DNS server
               PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
S server 192.5.5.241
            DNS server: 192.58.128.30 (j.root-servers.net.)
               1 test failure on this DNS server
               PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
S server 192.58.128.30
            DNS server: 193.0.14.129 (k.root-servers.net.)
               1 test failure on this DNS server
               PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
S server 193.0.14.129
            DNS server: 198.32.64.12 (l.root-servers.net.)
               1 test failure on this DNS server
               PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
S server 198.32.64.12
            DNS server: 198.41.0.4 (a.root-servers.net.)
               1 test failure on this DNS server
               PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
S server 198.41.0.4
            DNS server: 202.12.27.33 (m.root-servers.net.)
               1 test failure on this DNS server
               PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
S server 202.12.27.33
         Summary of DNS test results:
Auth Basc Forw Del Dyn RReg Ext
            Domain: sud.in
               MUM-ADS-01                   PASS WARN FAIL FAIL PASS WARN n/a
         ......................... sud.in failed test DNS

Hi Meinolf,
Please find the IP Details as well as DNS test results.
C:\Users\Administrator.SCI>dcdiag /test:dns
Directory Server Diagnosis
Performing initial setup:
   Trying to find home server...
   Home Server = MDCDCDNS
   * Identified AD Forest.
   Done gathering initial info.
Doing initial required tests
   Testing server: MDC-Powai\MDCDCDNS
      Starting test: Connectivity
         ......................... MDCDCDNS passed test Connectivity
Doing primary tests
   Testing server: MDC-Powai\MDCDCDNS
      Starting test: DNS
         DNS Tests are running and not hung. Please wait a few minutes...
ERROR: NO DNS servers for IPV6 stack was found
         ......................... MDCDCDNS passed test DNS
   Running partition tests on : ForestDnsZones
   Running partition tests on : DomainDnsZones
   Running partition tests on : Schema
   Running partition tests on : Configuration
   Running partition tests on : sci
   Running enterprise tests on : sci.com
      Starting test: DNS
         Test results for domain controllers:
            DC: MDCDCDNS.sci.com
            Domain: sci.com
               TEST: Basic (Basc)
                  Warning: The AAAA record for this DC was not found
               TEST: Records registration (RReg)
                  Network Adapter
                  [00000009] Microsoft Virtual Network Switch Adapter:
                     Warning:
                     Missing AAAA record at DNS server 10.64.7.32:
                     MDCDCDNS.sci.com
                     Warning:
                     Missing AAAA record at DNS server 10.64.7.32:
                     gc._msdcs.sci.com
                     Warning:
                     Missing AAAA record at DNS server 10.64.7.35:
                     MDCDCDNS.sci.com
                     Warning:
                     Missing AAAA record at DNS server 10.64.7.35:
                     gc._msdcs.sci.com
                     Warning:
                     Missing AAAA record at DNS server 10.20.33.72:
                     MDCDCDNS.sci.com
                     Warning:
                     Missing AAAA record at DNS server 10.20.33.72:
                     gc._msdcs.sci.com
                     Warning:
                     Missing AAAA record at DNS server 10.20.33.71:
                     MDCDCDNS.sci.com
                     Warning:
                     Missing AAAA record at DNS server 10.20.33.71:
                     gc._msdcs.sci.com
               Warning: Record Registrations not found in some network adapters
               MDCDCDNS                     PASS WARN PASS PASS PASS WARN n/a
         ......................... sci.com passed test DNS
C:\Users\Administrator.SCI>ipconfig /all
Windows IP Configuration
   Host Name . . . . . . . . . . . . : MDCDCDNS
   Primary Dns Suffix . . . . . . . : sci.com
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No
   DNS Suffix Search List. . . . . . : sci.com
Ethernet adapter Local Area Connection 7:
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : External Internal Virtual Network
   Physical Address. . . . . . . . . : 00-14-4F-CA-83-AC
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   IPv4 Address. . . . . . . . . . . : 10.64.7.32(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : 10.64.7.1
   DNS Servers . . . . . . . . . . . : 10.64.7.32
                                       10.64.7.35
                                       10.20.33.72
                                       10.20.33.71
   NetBIOS over Tcpip. . . . . . . . : Disabled
Ethernet adapter Local Area Connection 6:
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : TEAM : Team #1
   Physical Address. . . . . . . . . : 00-14-4F-CA-83-AC
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   Autoconfiguration IPv4 Address. . : 169.254.105.163(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.0.0
   Default Gateway . . . . . . . . . :
   NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter Local Area Connection* 8:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : isatap.{2D5A4A27-298F-48E5-A376-EA886EF1E
42A}
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 9:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : isatap.{14FA7CD4-8B69-4C86-A58B-056793B7D
901}
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Please check and revert back for any queries..
Thanks...
Deva Self-trust is the first secret of success.

The function "containsIgnoreCase" for prefix "fn" can not be found in the specified tag library.

Hi All,
I am getting this error on my jsff
The function "containsIgnoreCase" for prefix "fn" can not be found in the specified tag library.
jsff includes -
     <jsp:root   xmlns:f="http://java.sun.com/jsf/core"
          xmlns:fn="http://java.sun.com/jsp/jstl/functions"
          xmlns:c="http://java.sun.com/jsp/jstl/core">
Error at this line -    <af:inputListOfValues
                                                  disabled="#{fn:containsIgnoreCase(bindings.Items.attributeValue,'XYZ')}" >
Is it Library file issue ? I have already added JSTL1.2.

Hi Frank,
I have imported the same directly by code.
I am facing this issue on one of my system, but the same code is working fine in my other systems. I have tried re-insatlling jdev and importing all the files.
But still facing the same issue.. This might be some jdev issue in specific system ?
Please let me know if anything i need to add .

AD DS Config problem (The AAAA record for this DC was not found) Cannot connect to ADUC

I am trying to figure out what is wrong with my AD DS Config. I ran dcdiag. The results were:
C:\Users\Administrator>dcdiag /test:dns
Directory Server Diagnosis
Performing initial setup:
   Trying to find home server...
   Home Server = R210_1_2K12
   * Identified AD Forest.
   Done gathering initial info.
Doing initial required tests
   Testing server: Default-First-Site-Name\R210_1_2K12
      Starting test: Connectivity
         ......................... R210_1_2K12 passed test Connectivity
Doing primary tests
   Testing server: Default-First-Site-Name\R210_1_2K12
      Starting test: DNS
         DNS Tests are running and not hung. Please wait a few minutes...
         ......................... R210_1_2K12 passed test DNS
   Running partition tests on : Schema
   Running partition tests on : Configuration
   Running partition tests on : bcas-tbf
   Running enterprise tests on : bcas-tbf.local
      Starting test: DNS
         Test results for domain controllers:
            DC: R210_1_2K12.bcas-tbf.local
            Domain: bcas-tbf.local
               TEST: Basic (Basc)
                  Warning: The AAAA record for this DC was not found
               TEST: Records registration (RReg)
                  Network Adapter [00000017] Hyper-V Virtual Ethernet Adapter:
                     Warning:
                     Missing AAAA record at DNS server 172.16.0.202:
                     R210_1_2K12.bcas-tbf.local
                     Warning:
                     Missing AAAA record at DNS server 172.16.0.202:
                     gc._msdcs.bcas-tbf.local
                     Warning:
                     Missing AAAA record at DNS server ::1:
                     R210_1_2K12.bcas-tbf.local
                     Warning:
                     Missing AAAA record at DNS server ::1:
                     gc._msdcs.bcas-tbf.local
               Warning: Record Registrations not found in some network adapters
               R210_1_2K12                  PASS WARN PASS PASS PASS WARN n/a
         ......................... bcas-tbf.local passed test DNS
IPCONFIG info:
C:\Users\Administrator>ipconfig /all
Windows IP Configuration
   Host Name . . . . . . . . . . . . : R210_1_2K12
   Primary Dns Suffix . . . . . . . : bcas-tbf.local
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No
   DNS Suffix Search List. . . . . . : bcas-tbf.local
Ethernet adapter vEthernet (Broadcom BCM5716C NetXtreme II GigE (NDIS VBD Client
) #36 - Virtual Switch):
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Hyper-V Virtual Ethernet Adapter #2
   Physical Address. . . . . . . . . : 00-26-B9-7E-81-74
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   Link-local IPv6 Address . . . . . : fe80::bda9:1a28:974a:5fc3%19(Preferred)
   IPv4 Address. . . . . . . . . . . : 172.16.0.202(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : 172.16.0.1
   DHCPv6 IAID . . . . . . . . . . . : 335554233
   DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1A-0A-52-45-00-26-B9-7E-81-75
   DNS Servers . . . . . . . . . . . : ::1
                                       172.16.0.202
   NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.{AE70C63E-0A8A-4461-A789-8E4CD99CEA46}:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 11:
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   IPv6 Address. . . . . . . . . . . : 2001:0:9d38:90d7:1cf5:1d4f:53ef:ff35(Pref
erred)
   Link-local IPv6 Address . . . . . : fe80::1cf5:1d4f:53ef:ff35%15(Preferred)
   Default Gateway . . . . . . . . . : ::
   NetBIOS over Tcpip. . . . . . . . : Disabled
I'm unsure of what the problem is or what to do next. Thank You.

Disable IPv6 according to Pauls blog:
Disabling
IPv6 on Windows 2008
After disabling run:
ipconfig /flushdns
ipconfig /registerdns
restart the netlogon service or reboot.
For co-existence from IPv4 and IPv6 see:
Configuring DNS for IPv6/IPv4
Coexistence
IPv6
for the Windows Administrator: How Name Resolution Works in a Dual IPv4/IPv6 Scenario
IPv6 for the Windows Administrator: IPv6 Fundamentals
Hopefully, that fixes your issue. Added some links to read in cause you want to.
If it answered your question, remember to “Mark as Answer”.
If you found this post helpful, please “Vote as Helpful”.
Postings are provided “AS IS” with no warranties, and confers no rights.
Active Directory: Ultimate Reading Collection

How to maintain price condition record for the following senario

Hi Gurus,
I have a scenario where storage charges can apply either per cbm or per sq.mt or per day.
for a single customer.
Another situation --- Handling in Palletized charges per cbm or per pallet for a single customer
can somebody help me on this.
Thanks,
RR

Hi,
Scenario 1:
Go to VK11 tcode and Enter your KAD1 COndition Type.
Now maintain the Condition Record for your Customer.
Scenario 2:
Go to VK11 tcode and Enter your KP00 COndition Type.
Now maintain the Condition Record for your Customer.
Note for Scnario 2: Please make sure for KP00, the field Plus/minus in Condition Type setting should be "A" i.e the Surcharge. It is because the same condition Type can be used for Discount as well as for Surcharge.
The condition Type setting for KP00 can be done by going to V/06 tcode
Regards

How to maintain 2 condition record for the same message type

Hi,
My requirement is that I have got a PO output type NEU.Now when i release the PO 2 mesages should get outputed.
1) A print should go to the Printer ie:Option1 Print output
2) A PDF should go to the vendor ie:Option 5 External send
I have completed the config part but I am having a problem while maintaing the condition record for simultaneous output of message 1 & 5.
In MN04 i tried to maintain 1 & 5 but it doesn't allow me to do so?Why
How do I output 2 messages while releasing the PO
KN

Please check this answered link:
Re: Two PO Outputs.
Re: Emailing PO to Vendor, copy to buyer as well
Edited by: Afshad Irani on Jun 16, 2010 12:05 PM

Condition Records For output

Hi,
Can anyone help me how to find the condition records for output.
We have for the pick, pack and stage different printing options.
How can I check it on the system that they have been configured

go to NACE and check output type V4 for Picking V6 for Handling Unit and V2 for Shipping. You need to configure Pick Slip, Packing List/Delivery Note and HU labels here. Then you can chose out put on delivery for printing.

Find condition record for outline agreement

I want to know how I can find the condition record for an outline agreement. The condition number is not stored in EKKO and within the ME33K transaction I can view the condition by drilling into the item level (EKPO), but I canot find anyway of linking the agreemtn to the condition table KONP.
The reason for the qeustion is we want to outpu all agreements that have a certain condition. Any ideas.

try this code
REPORT zpwtest .
TABLES : ekko , ekpo , lfa1 , komk , komp , t001 , t001w , komv .
DATA : tkomv TYPE TABLE OF komv .
PARAMETER : p_ebeln TYPE ekpo-ebeln ,
            p_ebelp TYPE ekpo-ebelp .
SELECT SINGLE *
FROM ekko
WHERE ebeln = p_ebeln .
SELECT SINGLE *
FROM ekpo
WHERE ebeln = p_ebeln
AND ebelp = p_ebelp.
SELECT SINGLE *
FROM lfa1
WHERE lifnr = ekko-lifnr .
SELECT SINGLE *
FROM t001
WHERE bukrs = ekko-bukrs .
SELECT SINGLE *
FROM t001w
WHERE werks = ekpo-werks .
CALL FUNCTION 'ME_FILL_KOMK_PO'
EXPORTING
    i_ekko = ekko
    i_ekpo = ekpo
    i_lfa1 = lfa1
    i_t001w = t001w
    i_t001 = t001
    i_kalsm = ekko-kalsm
    i_kappl = 'M'
    i_kvorg = '02'             "Preissimulation
IMPORTING
    e_komk = komk.
IF komk-prsdt EQ 0.
komk-prsdt = sy-datlo.
ENDIF.
komk-fbuda = sy-datlo.
CALL FUNCTION 'ME_FILL_KOMP_PO'
     EXPORTING
          i_ekpo = ekpo
          i_t001w = t001w
          i_ekko = ekko
          i_komk = komk
*              I_MT06E = MT06E
*              I_EINA = EINA           "hier nicht gefüllt
     IMPORTING
          e_komp = komp.
CALL FUNCTION 'PRICING'
EXPORTING
    calculation_type = 'B'
    comm_head_i      = komk
    comm_item_i      = komp
IMPORTING
    comm_head_e      = komk
    comm_item_e      = komp
TABLES
    tkomv            = tkomv.
LOOP AT tkomv INTO komv .
WRITE : / komv-kschl , komv-kbetr CURRENCY komv-waers , komv-waers .
ENDLOOP.

FM or BAPI for creating/deleting condition records for an output type

Hi all,
what is the FM or BAPI for creating and deleting the condition records for a Z(custom) output type.

You can use trasaction SXDA_TOOLS.....
object type BUS3003
program type BINP
program/method RM06IBI0
but the fields must be sequentially written in the txt, with every space inclusive....

About the voice recorder for E72

I have several questions about the voice recorders for E72
1. The default recorder in E72 can only recorder 60min each time. Sometime I want to recorder a lecture. It stoped automaticly at 1 hr. I am wondering whether I can change the record time longer.
2. Another thing about the default recorder is that it can not recorder in background (When it is recording, you can not do anything else, can not touch any keys). The problem is that if you touched some keys during recording, it will stop recording. This is annoying.
3. I heard that "Total Recall Call Recorder" can record in background. I tried the trial verson. I found that it seems not compatible with other audio apps, such as FM radio, music player, and vedio player. Is it right? When I start recording with Total Recall Call Recorder, I can not use FM radio, music player, and vedio player. This means that Total Recall can not record sound from FM radio. Right?
4. I tried the trial version of Ultimate Voice Recorder, and found it can record sound from FM radio. If you use Ultimate Voice Recorder to record a phone call, is there any beep?
Thank you very much!

Welcome to Apple Discussions!
Other companies should be coming out with products like this shortly. Some companies have said their product (a voice recorder) would be out in the beginning of april.
I don't remember the link though, so try searching google or the discussions for 5G iPod Voice Recorder
btabz

Condition record for tax calculation

hi .
how to populate value for condition type MWAS (outputax)
where to create?

hi,
Tax is determined based on,
1) Departure Country , departure Zone is taken from delivering plant
2) Destination Country of the customer receiving the goods( i.e Ship to party)
3) Tax indicators in CMR >Sale area data>billing tab page& MMR>Sales:sale org data1 view.
Maintain all the above in the condition records for determining the tax condition rate in pricing procedure.
Reward if it is useful.
MCM

Downloading Pricing condition records for products from ECC to CRM

Hi All,
I have a requirement where i need to download condition records for products from ECC to CRM. The Inputs available for me are Product Id or the material number and the Sales org data.Kindly let me know the step by step procedure that i should follow to download the condition records for the products.
Note: 1. The Products are already in the CRM system.
2. I have downloaded the adapter object "DNL_CUST_CNDALL" already.
Thanks & Regards,
Shwetha.

First of check and ensure that if the records are already downloaded. To do so,
1) Log to ECC system and go to tcode V/06
2) From here select the condition type you are looking at. Dbl click on the condition type and note down the access seq.
3) Go to V/07. seelect the access seq you obtained in previous step and dbl click on "Accesses". Here you will come to know the condition table numbers. Note down the table numbers. (example: 002, 567)
Understand at this juncture that tables from 1-500 are SAP Standard tables and 501 - 999 are customer specific tables.
1) Log to CRM system and go to se16
2) Type CNCCRMPR002 or CNCCRMPR567 and Choose F4 from keyboard.
3) you should find an entry which looks like CNCCRMPRSAP002 or CNCCRMPRCUS567.
4) query the table with input parameters like Product or Sales Org. YOu should find the records.
If you fail in step 3, it means that the table itself has not come to CRM. For this do DNL_CUST_CNDALL with OPEN client (go to SCC4 and there Dbl clik on your client. There "NO CHANGES ALLOWED" should not have been selected. If it is so, consult your basis team and explain that DNL_CUST_CNDALL should be done on open client.(Repeat this even if you have already done that)
If you fail in step4, try downloading DNL_COND_A*** adapter Objects. *** stands for the ECC condition table captured from ECC (step3)
If you still are unable to find the record in the database table level, Check for the log in SLG1 tcode in CRM system. This gives you an idea of what's wrong.
Note: Even if you maintain conditions via Product master, ultimateley it gets stored in A* tables in ECC and CNCCRMPR* tables in CRM. So the above procedure holds good for whatever the case might be.
Hope this helps
Regds,
Raghu

Condition Records for Output types

Hello Gurus,
Do we need to maintain the condition records for the output types configured as Archive only Storage mode??
Will this option archive only in Output type completely archive the document???
Points will be rewarded generously for the apt answers
Thanks and Regards,
Pavan P.

hi pavan,
Still u have to maintain the condition record for the archive mode also. Becoz what are the document type u want to archive is defined in the o/p records.
suppose u want to archive billing documents types F2,F1etc...
then goto--> vv31-> enter RD00->enter the billing documnt type-. now click teh communication button on the top -
> here u will find the storage mode. Means the docuemnts which are created with F2 are archived.
regards,
Arunprasad
Message was edited by:
arun prasad

Satellite C50-B-13D - Can not install display driver

Hello,
I have a notebook Toshiba Satellite C50-B-13D. I had to reinstall my Windows 7 Professional 32 Bit OS. Now i have a problem with the drivers. For example i can not install the display driver. After i give permission to make changes on my computer the Error message "This computer does not meet the minimum requierments to install this software. Does anybody know what i can do?

Originally Posted by TomDexter
As I’m not mistaken the Satellite C50-B-13D does not contain dedicated GPU but the notebook was equipped with the Intel Celeron N2830 CPU which support the Intel HD Graphics 4000
So you need to install the Intel HD 4000 display driver.
Usually you have two possibilities to install the driver.
You can execute the installation.exe (setup.exe) file or you will install the driver within the device manager. I recommend you to choose the 2nd option in case the standard procedure does functions.
The driver from Toshiba EU driver page has to be unzipped.
Within the display-20140528122046 folder you would find the TC40214900E.exe
This is an zipped folder. Click right on this file and choose “unzip here”.
Now you will get another TC40214900E folder where you would find all the driver files (dll).
Next step: go to device manager, choose graphic card and click update/install driver
Now choose the “Advanced” installation option and point to the unzipped driver folder.
The system will pick up the files automatically and you could finish the installation.
That’s it.
Hello
I have same problem and can i use mentioned driver "TC40214900E.exe"? my notebooks model is satellite C55-B5201

I run a Windows 8.1 - Photoshop CS5 under Parallels on an iMac one year old and both having the latest OS. I use a NIK plugin "VIVEZA" which run fine for years without a problem. Latelt and without a reason, the NIK plugin has gone corrupt, (can not use

@I run a Windows 8.1 - Photoshop CS5 under Parallels on an iMac one year old and both having the latest OS. I use a NIK plugin "VIVEZA" which run fine for years without a problem. Latelt and without a reason, the NIK plugin has gone corrupt, (can not use it more the 2 corrections after a get a black background message that there is not enough memory) and the system stops running and a must restart is required. How do I fix this terrible problem?
If it requires a Photoshop CS5 re-install, (I belief that it may fix the problem) and re-install the two third party plugins (NIK Viveza) and (Onone Perfect Resize) how and where do I get to the proper Adobe upload page to do that.
I have tried to fix this problem by changing the memory allocations, I have spend many hours on it and are very disgusted with it but it needs to be fixed. The current memory settings are;
Ram available = 1588 MB
Range = 873 -1143 MB
Recommended Photoshop usage range = 857 however I have tried every setting to max and in between. Nothing works. Current setting = 1588 (max)
The Photoshop I use is registered, I have product # and order # .

Contact NIK for updated/upgraded versions of their plug-ins. They have been having a lot of issues with their plug-ins.

The condition record for use B can not be displayed

Similar Messages

Maybe you are looking for